Sim2 Multimedia HT3000E инструкция обслуживания

460649000 HT3 000E <<< user and inst a lla tion manua l[...]

2 ht3000e MENU SOURCE ESC Sets the unit to stand-by . Activates the On Screen Display menus and allows navigation though the various ▲ , ▼ , ◀ , ▶ Navigates between the On Screen Di- splay menus and parameter settings. Calls up the Source Selection menu. Deactivates the On Screen 1 REMOTE CONTROL AND KEYP AD KEYS 0-9 Select the sources dire[...]

3 ht3000e Dif fer ent in put sig nal re sol uti ons ca n be ad apt ed to matc h the spec if ied screen resolution without loss of image quality , thanks to a generous selection of preset aspect ratios , some of which are user definable . All picture adjustments can be made with the remote control interac- ting with a simple menu-activated On Screen[...]

4 ht3000e FCC ST A TEMENT CL A SS B PRODUCT Note: This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful inter ference in a residential installation . This equipment generates , uses and can ra[...]

5 ht3000e CAUTION T o reduce the risk of electric shock, disconnect the power supply cable on the rear panel before removing the top cover of the projector . For technical assistance refer to trained personnel authorised by the manufacturer . Read all chapters of this manual carefully before switching on the projector . This manual provides basic i[...]

6 ht3000e • Read this manual carefully and keep it in a safe place for future consultation. This manual contains important information on how to install and use this equipment correctly . Before using the equipment , read the safety prescriptions and instructions carefully . Keep the manual for future consultation . • Do not touch inter nal par[...]

7 ht3000e • Changing the fuses. Before changing the fuse disconnect the unit from the mains power supply . The fuse compartment is next to the power supply con- nector (Fig. 3). R emove the fuse holder (2) with a flat head screwdriver and replace the fuse (3). Fit a new spare fuse (4). Use only T 5A H fuses . Fig .3 • Be careful with cables. Ma[...]

8 ht3000e 1 2 3 4 3 UNP ACKING T o remove the HT3000E system from its carton follow the diagrams (Fig . 4). K eep the carton for use when transporting or ship- ping the unit . Fig .4 CONTENTS OF P A CKAGE Instruction manual Remote Control 1.5 V AAA batteries Po wer cable Europe, UK , US Pr ojector Le ns shif t ke y Fig .5 - the projector - Remote c[...]

9 ht3000e P osition the projector on a stable, suitable platform or utilise the optional bracket for a fixed ceiling installation . WARNING: If using the ceiling mount bracket, scrupulously obser ve the safety instr uctions included with the bracket itself . If using a bracket other than that supplied by SIM2 Multimedia, make sure that the projecto[...]

10 ht3000e T o activate an electric motorised screen a 12 V olt output is provided at the rear of the projector (Fig . 10). The output is activated (V oltage: 12 Vdc) when the projector is switched on and is de-activated (no V oltage output) when the projector is in stand-by mode . Y ou can also use black motirised curtains to delimit the screen wh[...]

11 ht3000e 5 SWIT CHING THE PROJECTOR ON AND OFF WARNING: Connect the projector to a power supply with a nominal voltage within the following values: 100-240 V AC, 50/60 Hz. It must be ear thed (Fig. 12). GRAPHICS RGB HV S-VIDEO AUDIO OUT HDMI 1 REMOTE 2 S-VIDEO MENU ESC INPUT 1 5 4 0 I P ower Switch: P osition I: On P osition 0: Off Fused P ower S[...]

12 ht3000e Initialisation Status Led blue Led red Standby On Cooling : O : On : Flashing Error (*) Logo Backlit Blue Color Red Color O / Blue Color (*) Red Color Red Color SWITCHING OFF AND RETURNING TO ST ANDBY With the remote control: press . With the keypad: press . When switching off , the projector goes into stand-by mode and stores the [...]

13 ht3000e HT3000E - Connection panel 3 1 2 4 5 T elevision receiver DVD player VCR Videocamera Video game console T elevision receiver HDTV receiver DVD player VCR Video game console Computer DVD player HDTV receiver Fig .16 6 +12V USB 1.1 R/Pr CONTROL (R S232 ) GRAPHICS RGB C/Y B/Pb HV S-VIDEO AUDIO O UT HDMI 1 REMOTE 3 2 S -VID EO MENU ESC SOURC[...]

14 ht3000e of the pictures reproduced by the HT3000E in the two cases: the deinterlacing per formed by the HT3000E is often more effective than that per formed by the source itself . GRAPHICS RGB / YPrPb This input should be connected to an RGB-type or YPrPb-type video signal using a cable with a DB15HD type connector . Using RGB-type signal, your [...]

15 ht3000e RS232 INTERFA CE CONNECTOR The projector can be controlled from a PC: simply hookup the inter face connector to a PC ’s RS232 serial cable or to a PC's USB 1.1 cable . Do not place objects between the remote control and the receiver on the projector , as this can prevent the remote from working. MOTORISED SCREEN OUTPUTS +12V USB 1[...]

16 ht3000e MAIN MENU T o access the main menu of the On Screen Display press the MENU key on the keypad or the MENU+ or MENU- key on the remote control. The main menu is divided into four windows , PICTURE, IMAGE , SETUP and MENU , in which the various adjustments are grouped according to the frequency of use. Use the ▲ and ▼ keys to select the[...]

17 ht3000e T o access these submenus, press the <, mentre l ’uscita ed il ritorno al livello superiore avviene con la pressione dei tasti MENU+/- key . Press ESC on the remote control or keypad to interrupt the menu display or wait for it to disappear automatically after the number of seconds set on the SET -UP page . PICTURE This menu include[...]

18 ht3000e NOISE REDUCTION This adjustment ser ves to select the noise reduction filter value. In this latter case, simply click on the slider and set the value with the ◀ and ▶ keys on the remote control . IMAGE This menu features adjustments relating to picture position, aspect ratio , magnification etc . A SPECT This adjustment allows you to[...]

19 ht3000e sising or attenuating the different grades of brightness (blacks , dark, medium , light grey , whites) in the projected image . The projector has a range of gamma functions which enable you to display any image to the best effect for the type of video source , the ambient lighting and your subjective preferences . There are 4 sets of gam[...]

20 ht3000e Enhanced set is suitable for watching movies. The Graphics set is suited to displaying synthetic graphics (PC, CAD , PC presenta - tions , etc.). User enables you to define your own cur ve. Y ou can thus select the coefficient which determines the cur ve. V alues from 1.5 to 2.2 allow you to emphasise the detail of dark images , but redu[...]

21 ht3000e MENUS L ANGUAGE It allow to select the languages available for the On Screen Display menus . INPUTS LIST In order to make the HT3000E system increasingly flexible, the funct ions descr ibed below make it possibl e to modify the inputs selection menu and adapt it so that it matches the require- ments of the user more closely . The main pa[...]

22 ht3000e same k ey as before . Use the ▲ k ey to switch from upper case to lower case characters . Cancel errors with ▼ once you have selecte d the character in question . Once you have terminated the text input procedure confirm your text and save it by pres- sing the MENU+ key on the remote control. If you wish to cancel the modifications ,[...]

23 ht3000e making a total of 24 different available Memories . The image parameters that can be saved/recalled by the Memories management system are the following: Image Picture BRIGHTNESS ASPECT CONTRAST COL OUR TEMPERA TURE COL OUR OVERSCAN TINT GAMMA SHARPNESS FIL TER NOISE REDUCTION Some of these parameters may not be available for certain inpu[...]

24 ht3000e 232) GRAPHI CS RGB HV S-V ID EO AUDIO OUT HDMI 1 RE MOTE 2 S-V ID EO MENU ESC IN PUT 1 5 4 HDMI 2 6 Fig .32 Save memor y T o save the image parameter current values in memor y 1, move the cursor to line ‘1’ with the ▼ and ▲ ‚ keys and open the pull-down menu by pressing the ◀ key (Fig.33). Now select Save current settings. T [...]

25 ht3000e INFO Displays the current status of the projector and information concerning the projected video/graphic signal. This function is displayed on pressing the key on the remote control (or , in the absence of the On Screen Display , the ▶ k ey on the keypad). QUICK MENUS The quick menus provide access to the main adjustments that affect i[...]

26 ht3000e 11 TROUBLESHOOTING GUIDE No power (LEDs always OFF) • Check that the units ’ power switches are set to I. • Check that the power cables are correctly connected to the units’ power sockets . • Check the condition of the fuse located on the power socket on the rear of the projector . • R e p l a ce t h e f u s e l o c a t e d o[...]

27 ht3000e Y ou can purchase the following optional accessories at your Dealer: - Ceiling mount kit - L ens A range of lenses are available from our dealers to satisfy var ying installation and projection distance needs. See the Additional Information chapter for greater details on projection distance and enlargement ratios . Always contact our ser[...]

28 ht3000e ELECTRONICS Input signals:  •COMPOSITEVIDEO(CVBS) gold plated RCA connectors 1,0 V pp /75Ω,negativesynchronisation  •1S- VIDEO(Y/C) 4-pole mini-DIN connector Y: 1.0 V pp /75Ω,negativesynchronisation C : 0.286 V pp /75Ω,[nominalNTSCburstlevel] 0.3 V[...]

29 ht3000e B ON SCREEN MENU L A YOUT IMA GE PICTURE Brightness Contrast Color T int Sharpness Filter Cinema Mode Best Color Video • S-Video [NTSC] Orientation Keystone Lens Power ON T est patterns Initial settings Lamp Power Floor Floor-rear Ceiling Ceiling-rear Normal Anamorphic Letterbox Panoramic Subtitles Pixel to Pixel User 1 User 2 User 3 H[...]

30 ht3000e SETUP Orientation Keystone Projection Lens Lamp Power Power On T est patterns Initial settings Floor Floor-rear Ceiling Ceiling-rear Horizontal V ertical Auto Stand-by Language Source list F1/F2 keys Source info OSD background OSD Position OSD T imeout Zoom Focus Magnification Blank Color temperature Gamma correction Y es No Italiano Eng[...]

31 ht3000e C DIMENSIONS[...]

32 ht3000e D PROJECTION DIST ANCE Min projection distance 1 6/9 2,3 90” 2,7 107 ” 3,2 1 26 ” 3,6 1 44 ” 4,1 162 ” 4,6 180 ” 5,0 198 ” 5,5 215 ” 6 ,8 2 70” 8,2 323 ” 9,1 36 0” 11,4 449” Max projection distance 1,1 44” 1,3 52” 1,6 61” 1,8 7 0” 2,0 7 8” 2,2 8 7” 2,4 96” 2,7 1 05” 3,3 1 31” 4,0 1 57” 4,4 17 4[...]

•Inaccordancewiththemanufacturer ’sconstantproductdevelopmentprogramme ,productspecificationsanddesignaresubjecttochangeswithoutnotice. SIM2 Multimedia is certified SIM2 Multimedi a S .p .a . •VialeLinoZanussi,11•33170P ordenone-IT AL Y Phone+39.434[...]