Sharp PN-70SC3 инструкция обслуживания

PN-70SC3 LCD MONIT OR OPERA TION MANUAL[...]

Information on the Disposal of this Equipment and its Batteries IF YOU WISH TO DISPOSE OF THIS EQUIPMENT OR ITS BA TTERIES, DO NOT USE THE ORDINARY W ASTE BIN, AND DO NOT PUT THEM INT O A FIREPLACE! Used electrical and electronic equipment and batteries should always be collected and treated SEP ARA TEL Y in accordance with local law . Separate col[...]

3 E IMPORT ANT INFORMA TION W ARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning ash wit[...]

4 E Thank you for your purchase of a SHARP LCD product. T o ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly[...]

5 E SAFETY PRECAUTIONS (Continued) 19. Batteries — Incorrect use of batteries may cause the batteries to burst or ignite. A leaky battery may corrode the equipment, dirty your hands or spoil your clothing. In order to avoid these problems, make sure to observe the precautions below: • Use the specied batteries only . • Install the batterie[...]

6 E W ARNING: T o prevent the spread of re, keep candles or other open ames away from this product at all times. SAFETY PRECAUTIONS (Continued)[...]

7 E - The TFT color LCD panel used in this monitor is made with the application of high precision technology . However , there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colors or brightness. Please note that these are not malfunctions but[...]

8 E MOUNTING PRECAUTIONS • This product is for use indoors. • A mounting bracket compliant with VESA specications is required. • Since the monitor is heavy , consult your dealer before installing, removing or moving the monitor . • Mounting the monitor on the wall requires special expertise and the work must be performed by an authorized[...]

9 E Contents IMPORT ANT INFORMA TION ............................................ 3 DEAR SHARP CUST OMER .............................................. 4 SAFETY PRECAUTIONS .................................................. 4 TIPS AND SAFETY INSTRUCTIONS ............................... 7 MOUNTING PRECAUTIONS ........................................[...]

10 E Supplied Components If any component should be missing, please contact your dealer . System Requirements Computer PC/A T compatible computer with a USB 2.0 port and able to output a resolution of 1920 x 1080. OS Windows 7 (32-bit or 64-bit version), Windows 8 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version) CPU Intel Celeron [...]

11 E Part Names n Front view 3 3 4 4 4 4 12 5 n Rear view 12 13 14 15 17 18 19 20 21 22 23 6 16 7 8 9 10 11 24 1. Remote control sensor (See page 16.) 2. Power LED (See page 17.) 3. Speakers 6. V ents 7. POWER button (See page 17.) 8. MENU button (See page 21.) 9. INPUT/ENTER button (See page 21.) 10. Cursor control ( / / / ) buttons (See page 21.)[...]

12 E Part Names n Remote control unit 1 2 3 4 5 6 11 8 7 9 10 1. Signal transmitter 2. POWER button (See page 17.) 3. MUTE button (See page 21.) 4. VOL +/- buttons (See page 21.) Cursor control ( / / / ) buttons 5. DISPLA Y/F1 button (See page 21.) 6. MODE/F2 button (See page 21.) 7. INPUT button (See page 21.) 8. MENU button (See page 21.) 9. ENTE[...]

13 E Connecting Peripheral Equipment Caution • Be sure to turn off the power and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables c[...]

14 E Cable clamp (affixing type) Affixing point Cable The supplied cable clamps (afxing type) can be used to clamp the USB cable and cables connected to the back of the monitor . Caution • Attach the supplied cable clamps to a at surface. Do not attach over a vent. • Remove any dust or dirt before attaching. Be sure to clamp the power cor[...]

15 E Afxing the Stand Hole Protection Covers After installing the monitor , afx the stand hole protection covers. 1. Peel off the backing sheet and afx the cover on the monitor .[...]

16 E Preparing the Remote Control Unit Installing the batteries 1. Press the cover gently and slide it in the direction of the arrow . 2. See the instructions in the compartment and put in the supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and minus (-) sides oriented correctly . 3. Close the cover . TIPS • When the batteries be[...]

17 E Caution • Whenallconnectionsarecomplete,turnonthepower . • T urnonthemonitorrstbeforeturningonthecomputeror playbackdevice. • EvenwhenthepoweristurnedoffwiththePOWERbutton onthemonitor ,aminuteamountofpoweris?[...]

18 E T ouch action T ouch action T ouch actions that can be used with this monitor differ according to operating system and application. The functions of touch actions are also different. For details, check Windows Help and the application’s support documentation. OS T ouch action Windows 8 / 8.1 Windows 7 Single-tap Ye s Ye s Double-tap Ye s Ye [...]

19 E T ouch action Drag-and-drop Same action as drag-and-drop with a mouse. T ouch the screen with your nger/ touch pen and move without lifting. When you hav e nished the movement, lift your nger/ touch pen. Flicks Flick your nger/ touch pen in the direction of the function you want to use. Flick your nger Press-and-hold Same action[...]

20 E T ouch action Rotate Use this action in a screen that is capable of image rotation. T ouch the center point of the rotation with one nger . While holding that nger still, move another nger in the desired direction of rotation. With one nger touching Move another nger in the desired direction of rotation TIPS • The screen may n[...]

21 E Basic Operation Using the buttons on the remote control unit and monitor n Remote control unit n Buttons on the monitor 1/6 3 4 5 1 2 3 4 8 9 10 7 6 5 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press ENTER to enter . Input mode Video HDMI1 HDMI1 input terminal (INPUT1) HDMI2 HDMI2 input [...]

22 E Basic Operation n Switching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. INPUT SIGNAL WIDE * 1 UNDERSCAN * 2 Dot by Dot NORMAL 16:9 video 1920 × 1080, 1280 × 720 etc. Displays image so it lls the entire screen. Displays the video according to the input signal. Display[...]

23 E Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 24 to 26 for details of each menu items. Caution • Do not turn off the power while the menu items are being displayed. Doing so may initialize the settings. n Example of o[...]

24 E Menu Items Menu item details The menu will differ depending on the input mode. ■ PICTURE PICTURE MODE Video and audio settings can be changed to match the scene, such as a movie or computer monitor image. PC ............................ Congure the settings for use with a computer . DYNAMIC ................. Increase the contrast for acti[...]

25 E Menu Items ■ AUDIO AUDIO SETTINGS Set by the currently selected picture mode. TREBLE Adjusts the volume of treble-level sound. BASS Adjusts the volume of bass-level sound. BALANCE Adjusts the balance of the audio sound between right and left. RESET Resets the values of the AUDIO menu items of the currently selected picture mode to the factor[...]

26 E Menu Items ■ OTHERS AUDIO OUTPUT For audio output that allows volume adjustment, select the internal speakers or the audio output terminal. FIXED.............. Y ou can adjust the volume of the speakers. The volume of the audio output terminal is xed and cannot be adjusted. V ARIABLE ....... The speaker volume is muted and the volume of t[...]

27 E Menu Items Adjustments for PC screen display n Automatic adjustment When you use PC (INPUT6) to display a computer screen for the rst time, or when you change the setting of the computer , use the automatic screen adjustment. 1. Switch the input to PC and display the adjustment pattern. (See the description below .) 2. Press MENU and use or[...]

28 E Y ou can restrict operations. 1. Hold SIZE down until “F” appears in the left of the screen. 2. While “F” appears, press , , , in that order . [OFF ] [OFF ] [OFF ] [OFF ] FUNCTION POWER BUTTON LOCK RC LOCK MONITOR LOCK MENU LOCK EXECUTE 3. Press or to select and set the items. POWER BUTTON LOCK Y ou can disable the remote control POWER[...]

29 E Controlling the Monitor with a PC (RS-232C) Y ou can control this monitor from a PC via RS-232C (COM port) on the PC. PC connection Connect with RS-232 cross cable between the PC’s COM port (RS-232C connector) and the RS-232C input terminal on the monitor . RS-232 cross cable (commercially available) To COM port PC RS-232C input terminal Com[...]

30 E RS-232C command table How to read the command table Command: Commandeld(Seepage29.) Parameter: Parametereld(Seepage29.) *: Enterthenumberinbracketsinthesettings : Enteraspace TIPS • Inthestandbymode,theonlycommandthatisusedisPOWERCO[...]

31 E T roubleshooting If you are experiencing any problem with your display , before calling for service, please review the following troubleshooting tips. There is no picture or sound. • Is the power on? (See page 17.) • Make sure correct input mode is selected. (See page 21.) • If any external equipment is connected, make sure the equipment[...]

32 E The power LED is ashing. When “TEMPERA TURE” is displayed in the corner of the screen. • T o prevent high-temperature-related problems, “TEMPERA TURE” is displayed on the screen when the internal temperature of the monitor rises excessively . • If the internal temperature rises further , the monitor automatically enters standby [...]

33 E Specications n Product Specications Model PN-70SC3 LCD component 70" Class [69-1/2 inch (176.6cm) diagonal] TFT LCD Max. resolution (pixels) 1920 x 1080 Max. colors Approx. 16.77 million colors Pixel pitch 0.802 mm (H) × 0.802 mm (V) Viewing angle 160° right/left/up/down (contrast ratio ≥ 10) Screen active area inch (mm) 60-9/16[...]

34 E Specications n Dimensional Drawings Note that the values shown are approximate values. 64-5/16 [1633] 31-1 1/16 [805] 3-1/4 [83] 39-1/8 [994.5] 18-7/8 [479] 41-1/4 [1047.5] Opening width (60-7/8 [1546]) Opening height ( 34-3/16 [869] ) 4-5/16 [109] 1-7/16 [36] 7-7/8 [200] 7-7/8 [200] 7-1/2 [190] 8-1/4 [210] Unit: inch [mm] When mounting the[...]

35 E n DDC (plug and play) The monitor supports the VESA DDC (Display Data Channel) standard. DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters is exchanged between the two. This function can be used if the computer supports DDC and it has been congured to detect plug-and[...]

36 E n Compatible signal timing (A V) Screen resolution Frequency HDMI Component 1920 × 1080p 24Hz Ye s - 50Hz Ye s Ye s 59.94Hz Ye s Ye s 60Hz Ye s Ye s 1920 × 1080i 50Hz Ye s Ye s 59.94Hz Ye s Ye s 60Hz Ye s Ye s 1280 × 720p 50Hz Ye s Ye s 59.94Hz Ye s Ye s 60Hz Ye s Ye s 720 × 576p 50Hz Ye s * 1 - 720 × 480p 59.94Hz Ye s * 1 - 60Hz Ye s * 1[...]

37 E n D-sub input terminal pins (Mini D-sub 15 pin) No. Function No. Function 1 Red video signal input 9 +5V 2 Green video signal input 10 GND 3 Blue video signal input 11 N.C. 4 N.C. 12 DDC data 5 GND 13 Hsync signal input 6 GND for red video signal 14 Vsync signal input 7 GND for green video signal 15 DDC clock 8 GND for blue video signal n HDMI[...]

38 E • When installing, removing or moving the monitor , ensure that this is carried out by at least 3 people. • Be sure to use a wall-mount bracket designed or designated for mounting the monitor . • This monitor is designed to be installed on a concrete wall or pillar . Reinforced work might be necessary for some materials such as plaster /[...]

PN-70SC3 M EN15E(1)[...]