Sharp LC-52HD1E инструкция обслуживания

LC-46HD1E LC-52HD1E LCD COLOUR TELEVISION LCD-F ARBFERNSEHGERÄT TÉLÉVISION COULEUR À ÉCRAN À CRIST AUX LIQUIDES (LCD) TELEVISORE A COLORI LCD ENGLISH DEUTSCH FRANÇAIS SHARP ELECTRÓNICA ESP AÑA S.A. Polígono Industrial Can Sant Joan Calle Sena s/n 08174 SANT CUGA T DEL V ALLÉS BARCELONA (ESP AÑA) SHARP CORPORA TION Printed in Spain Gedru[...]

SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fi tted with a non-rewir eable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refi t the f[...]

OPERA TION MANUAL ENGLISH Contents .........................................................................................1 Dear SHARP customer .................................................................. 2 Important Safety Precautions ......................................................2 T rademarks ......................................[...]

• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or r egistered trademarks of HDMI Licensing LLC.” Dear SHARP customer • Cleaning—Unplug the AC cord fr om the AC outlet before cleaning the product. Use a damp cloth to clean the pr oduct. Do not use liquid cleaners or aerosol cleaners. • W ater and moisture?[...]

Supplied accessories Pr eparation Attaching the speaker unit • Before attaching (or detaching) the speaker unit, unplug the AC cor d from the AC INPUT terminal. • Before performing work spr ead cushioning over the base area to lay the TV on. This will prevent it fr om being damaged. Connect the ends of the cables to the speaker terminals as sho[...]

Attaching the stand unit • Before attaching (or detaching) the stand, unplug the AC cor d from the AC INPUT terminal. • Before performing work spr ead cushioning over the base area to lay the TV on. This will prevent it fr om being damaged. CAUTION • Attach the stand in the correct dir ection. • Be sure to follow the instructions. Incorr ec[...]

Setting the TV Preparation Antenna Connect the antenna cable from your antenna- /cable socket or the (room-/r oof) antenna for antenna input terminal on the back of your TV set to receive digitally/terr estrially broadcast stations. An indoor antenna can also be used under good reception conditions. Passive and active r oom antennas are of fered co[...]

Preparation TV (Front view) TV (Rear view) 5 1 2 3 4 6 7 16 17 18 8 9 10 11 12 13 15 19 14 1 EXT 4 terminals * Do not connect S-VIDEO and VIDEO at the same time. 2 USB terminal 3 Headphones 4 COMMON INTERF ACE slot ( g 2) ** Remove the cover when inserting the CI Module. 5 ANT IN terminals 6 AUDIO OUT terminals 7 AUDIO IN terminals 8 EXT 3 (COMPONE[...]

Preparation Inserting the batteries Before using the TV for the first time, insert two “AAA” size batteries (supplied). When the batteries become depleted and the remote contr ol unit fails to operate, replace the batteries with new “AAA” size batteries. Open the battery cover . Insert two supplied “AAA” alkaline size batteries. • Pla[...]

Preparation Remote control unit NOTE • The symbols 8 , 9 and 0 indicate that the buttons become available in respective operating mode when using as a universal remote contr ol. 1 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 B (TV Standby/On) (Page 12) 2 LIGHT D 8 9 0 When pr essed, buttons that are frequently used ( P r / s , i k / l [...]

Initial installation Initial installation overview Follow the below steps one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. 9 n Connect the AC cor d (Page 5) o Connect antenna (Page 5) Analogue/DVB-C/DVB-T antenna: Plug the antenna of antenna system, cable system, or r[...]

Initial installation Initial installation wizard When the TV powers on for the first time after purchase, the initial auto installation wizar d appears. Follow the menus and make the necessary settings one after another . Proceed Initial installation -> Language NOTE • Y ou can repeat this installation pr ocess by conducting the “Repeat init[...]

Initial installation Positioning/aligning DVB-T antenna If you are r eceiving one or more DVB-T stations with picture and sound interfer ence then you should change the installation location and alignment of the antenna. Ask your dealer to tell you which channels are used to broadcast the DVB-T stations in your r egion. Prer equisite : In normal TV[...]

Switching on/off T ur ning on/of f the power Press a on the TV . Switch it off by pr essing a on the TV . • However , please bear in mind that EPG data (electronic programme guide) will be lost, and pr ogrammed timer recor dings will not be performed by the TV . Standby mode If the TV set is switched on, you can switch it to standby by pressing B[...]

With the favourites lists: Y ou can save and select your favourite stations in 6 favourites lists (e.g. for multiple users). Each favourites list can contain up to 99 stations. After initial installation, 10 stations from the station list ar e already stored in the first list. Change the favourites list to suit your requir ements (see “Select/cha[...]

Connecting exter nal devices The TV’ s integrated Connection wizard helps you connect new external devices and make cable changes. Before actually connecting the external device, run the Connection wizard and register the equipment to be connected. E Before connecting ... Carefully r ead the operation manual of each exter nal device for possible [...]

Connection wizard The integrated Connection wizard shows you which terminal you should connect your equipment to. Connect the equipment according to the diagram and follow the messages one after the other . NOTE • New devices should not be connected until they have been register ed in the connection wizard. Press MENU and the TV menu scr een disp[...]

Connecting external devices HDMI connection The HDMI connections (High Definition Multimedia Interface) permit digital video and audio transmission via a connection cable from a player . The digital picture and sound data ar e transmitted without data compression and ther efore lose none of their quality . Analogue/digital conversion is no longer n[...]

Connecting external devices Audio connection Analogue audio: Connect the analogue audio signal from the PC or the SetT opBox via stereo cable to the AUDIO IN (L/R) jack on the TV set. • The sound is played via the speakers connected to the TV set or a speaker system. Digital audio: • An external digital audio signal can be reproduced via the in[...]

Connecting external devices PC compatibility chart Resolution Horizontal Frequency V ertical Frequency Analogue (D- Sub) Digital (HDMI) VESA Standard VGA 640 g 480 31.5 kHz 60 Hz ✔✔ g SVGA 800 g 600 37.9 kHz 60 Hz ✔✔ g XGA 1024 g 768 48.4 kHz 60 Hz ✔✔ g SXGA 1280 g 1024 64.0 kHz 60 Hz ✔✔ g FULL HD 1920 g 1080 67.5 kHz 60 Hz ✔ NOTE[...]

Connecting external devices Connecting H DMI device to TV Controlling HDMI devices using AQUOS LINK What is AQUOS LINK? Using the HDMI CEC (Consumer Electronics Contr ol) protocol, with AQUOS LINK you can interactively operate compatible system devices (A V amplifier , DVD, Blu-ray Disc device) using a single remote contr ol. NOTE • AQUOS LINK-co[...]

Connecting external devices AQUOS LINK setup E AQUOS LINK Auto power on If this is activated, the One T ouch Play function is enabled. While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI sour ce. Press MENU and the TV menu scr een displays. Press c / d to select “Setup”, and then pr ess OK . Setup ?[...]

Connecting external devices Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMI- connected device with one remote contr ol. NOTE • The AQUOS LINK buttons such as B , REV G , PLA Y I , FWD J , STOP H inside the flip cover should not be confused with the buttons used for HDD operation. See page 45. Open the remote contr ol’ s[...]

Using A V Link function This TV incorporates four typical A V Link functions for smooth connections between the TV and other audiovisual equipment. One T ouch Play While the TV is in standby mode, it automatically turns on and plays back the image from the audiovisual source (e.g. VCR, DVD). TV Standby When the TV enters standby mode, the connected[...]

Other featur es Picture in Pictur e (PIP) Using the PIP menu Here you can set the PIP type (split scr een or small picture) and the position of the small pictur e. Press PIP to activate the PIP scr een. Make sure the pictur e you want to operate is surrounded in a gr een frame. Press MENU to display the PIP menu. Her e you can change the PIP type ([...]

Other features Using PhotoViewer This TV is equipped with PhotoViewer , allowing you to view pictures in the standar d JPEG format via a USB stick or a memory card in a car d reader . In addition you can arrange the pictures into a Slideshow . E Connecting Insert a card r eader (with a USB cable) or a USB stick into the USB terminal on the TV (see [...]

W atching Slide show Starting Slide show Press I to start/resume Slide show . NOTE • If no pictures is selected for Slide show , all the pictures in the memory device are played in Slide show . While Slide show is in progr ess (or paused), you can: ✔ Press OK to display Photo Overview . ✔ Press F to pause/resume Slide show . ✔ Press YELLOW [...]

Other features EPG (Electronic Pr ogramme Guide) EPG stands for Electronic Pr ogramme Guide and provides you with on-scr een programme details. W ith this system, as with a printed programme guide, you can learn about the current programme. In addition, programmes can be sorted accor ding to certain topics, memorized, and recor dings can be program[...]

Other features Using EPG menu Press EPG . Press MENU . EPG menu Station selection Data capture on (for DVB + analogue) Items Description Select provider In analogue TV reception, ther e are possibly differ ent providers who br oadcast the EPG data for certain station packages. T o get another range of stations, you can change the provider with the [...]

Conditional Access Module (CI Module) In order to r eceive coded digital stations, a Conditional Access Module (CI Module) and a CA Card must be inserted in the CI slot of your TV set. (Page 6) The CI Module and the CA Card ar e not supplied accessories. They are usually available fr om your dealer . Inserting the CA Card into the CI Module Make su[...]

W atching DVB broadcasts Software update TV base software and DVB softwar e T o ensure that your TV set is always up to date, fr om time to time SHARP will make updated TV base software and DVB softwar e versions available. These updates are br oadcast via satellite (only via ASTRA1). • This function is not available in some countries. Automatic [...]

W atching DVB broadcasts Radio mode Y ou can only receive radio stations via DVB. If you do not have DVB radio reception then you can play audio from an external device via the TV set using the audio/A V inputs. Press RADIO to activate the DVB radio mode. 18:00 - 18:10 Nachrichten Radio: Stereo EXT6 EXT5 • An overview of the radio stations displa[...]

Info display and index feature We have designed the TV with integrated content- based information text for each item so that you do not have to worry about reading the operation manual each time. In conjunction with the index feature, this makes a convenient control system. Using info text Press INFO with the menu scr een active. • Y ou can see i[...]

Sound menu V arious sound-related settings can be optimised. Sound TV menu DYNAMIC Treble Bass Loudness Dolby Virtual Speaker Auto volume 0 0 off on off off Balance 0 AV output signal Sound 1+2 Headphone volume 50 Switch on volume 30 Volume adjustment for current station 0 Reset Recording Connections Setup Εxten d ✔ Sound menu items Items T rebl[...]

Recording menu Y ou can set timer programmed recor dings with the integrated HDD Digital Recorder or other connected recor ding devices. Further information on HDD recor ding is provided in the chapter “ HDD Digital Recorder operation ”. • The internal HDD DIGIT AL Recorder cannot recor d signals from the following terminals: EXT 3 (COMPONENT[...]

E Manual Y ou may enter the necessary information for recording manually . Select “Manual” instead of “Via EPG” in step 4 in Via EPG . • The station selection screen displays. • Y ou may be routed to the “Time and date” entry screen if the TV does not r ecognise the current time. Press a / b / c / d to select the station you want to[...]

Connections menu Use this menu when connecting recor ders, DVD recor der , etc. There is a wizar d which will guide you through the individual steps. TV menu AV setup Sound components Antenna DVB AV-Link Miscellaneous Setup Εxtended functions Picture Connections ✔ Connections menu items Items A V setup Connection wizar d Sound components TV spea[...]

Menu operation Setup menu Y ou can search for stations automatically or manually as well as set the menu language, timer functions, child lock, etc. Setup Εxtended functions Picture Sound TV menu AQUOS LINK setup Stations Child lock Timer functions Language Miscellaneous Items AQUOS LINK setup Auto power on Recorder selection Stations Search wizar[...]

Menu operation E Manual tune Use the manual tune option when receiving TV signals whose TV/Colour standard deviate fr om the one specified. However , this requires detailed knowledge. E Change stations Y ou can move stations, enter or change station names, and delete stations. The operation is the same as explained on page 12, “ T o delete, resto[...]

Menu operation Geometry menu In this menu you can set the geometry values of your connected PC. First connect PC to EXT7 (ANALOG RGB) or to EXT5/6 using HDMI/DVI conversion cable. Recording TV menu Picture horizontal Picture vertical Phase position 0 0 0 Geometry Picture Sound Con n Items Picture horizontal Picture vertical Phase position* * May no[...]

Wide modes Y ou can select the picture size. Selectable picture size varies with the type of signal received. Basically , if you set Auto format to “on” in the Setup menu, the optimum Wide mode is automatically chosen for every broadcast. Y ou can however , change the screen format manually as explained below . NOTE • Aside from manually chan[...]

Menu operation Using teletext menu While in the teletext mode, press MENU to display the T eletext menu. Newsflash Reveal Recording wizard Setup Teletext menu Items Newsflash Reveal/Conceal Recording wizar d Setup Preview pages Sub-title pages Character set HiT ext Buttons for teletext operation Buttons Description Colour (Red/ Green/ Y ellow/ Blue[...]

Important information Hard disk (HDD) This TV set recor ds programmes onto a hard disk drive (HDD). The hard disk is equipped with a safety mechanism to protect data fr om impact, vibration and dust. However , to prevent loss of recor ded data, you should be particularly careful of the following points: • Do not subject the TV set to any impact. [...]

Features About the Digital Recorder system Y our SHARP TV set is equipped with a Digital Recorder that includes a hard disk. Y ou can use this to recor d and playback picture and sound fr om TV programmes, like with a VCR or DVD recor der . HDTV programmes can also be recor ded and played back. However , the possibilities of the Digital Recorder ar[...]

About time shift viewing and archive r ecording/playback HDD Digital Recorder operation 43 Always recor ding... Storing time shift r ecording into an ar chive: Y ou can convert the programme you are curr ently recor ding with a time shift into an archive. (Page 46) Ar chive recor ding Y ou can choose to store the programmes dir ectly into the DR ar[...]

Navigating the Digital recor der menu Y ou can use the Digital Recorder with the default values set at the factory . This section explains how to customise these values to meet your own prefer ence. T o change the settings, first call the Digital Recorder menu scr een as explained below . Press RED to display the DR ar chive menu. SHARP Demo DR arc[...]

HDD Digital Recorder operation Recording with the HDD Time shift recor ding and archive recor ding There ar e 2 ways of recording a TV pr ogramme with the HDD. One is Time shift recording and the other is Archive r ecording. E Time shift recor ding The TV automatically recor ds the programme currently tuned in. Pause, rewind, and chasing playback i[...]

Recording Press E . • If time shift is enabled this operation initiates the conversion of time shifted recor ding into the archive. current programme 30 60 90 120 180 Recording duration (min.) Select “current pr ogramme” (only if EPG or teletext data is available) or select one of the given minutes, or select “???” and enter the recor din[...]

Timer recor ding Y ou can programme the timer using the EPG, teletext or manually . Y ou can programme up to 50 timer r ecordings. If you have programmed timer r ecordings, the TV set may only be switched off into the stand-by mode. NOTE • Do not switch the TV set off with the main power switch ( a ) and do not pull the AC plug from the power out[...]

HDD Digital Recorder operation E Deleting programmed timer entries In the TV mode, press MENU to display the TV menu. Select “Recording” with c / d and pr ess b to move down. Select “Timer list” with a / b , and then press OK . Select the entry to delete with a / b . Press YELLOW (Delete), and confirm with OK . • T o abort the deletion, p[...]

HDD Digital Recorder operation E Fast forward and r ewind Y ou can fast forward and rewind at 3 dif ferent speeds during time shifted TV viewing or archive playback. No sound is audible during winding. (When viewing HDTV , rewind is not possible.) Press Fast Forwar d J or Rewind G briefly . Press Fast Forwar d J or Rewind G briefly again to increas[...]

HDD Digital Recorder operation E Copying recor dings to an external device This is simple with a VCR or DVD recor der equipped with A V Link. Press RED to display the DR ar chive menu. Press YELLOW (Delete/copy). 31.08. Das Erste da capo 14.09 Phoenix Bon(n) jour Berlin 29.09. 3sat AVO-Session Basel 06.10. Das Erste Brisant Kultur pur free capacity[...]

HDD Digital Recorder operation Bookmark For example, you want to flag interesting scenes and goals of sports programmes in or der to watch them again when playing the recor ding. Y ou can set bookmarks while you are watching the live pictur e with time shift, while recor ding into the archive or playing from the ar chive. Press I briefly in or der [...]

Appendix T roubleshooting Problem Possible Solution • No power . • Check if you pressed B on the r emote control unit. If the indicator on the TV lights up red, press B . • Is the AC cord disconnected? • Check if you pressed a on the TV . • Unit cannot be operated. • Exter nal influences such as lightning, static electricity , etc., may[...]

C1 C2 C3 C4 P1 P2 P3 P4 00 5 5 10 0 –3 0 0009 0 ???? ? OK ER R RS-232C port specifications PC Control of the TV • When a programme is set, the TV can be contr olled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling auto[...]

CONTROL ITEM COMMAND P ARAMETER CONTROL CONTENTS POWER SETTING P O W R 0 _ _ _ POWER OFF INPUT SELECTION A I T V D _ _ _ _ TV (CHANNEL FIXED) I A V D * _ _ _ EXT1 – 7 (1 – 7) I A V D ? ? ? ? 1 to 7, 0 (TV/DTV) CHANNEL D C C H * * * _ TV DIRECT CHANNEL (0 – 999) D C C H ? ? ? ? 0 to 999 C H U P _ _ _ _ CHANNEL UP C H D W _ _ _ _ CHANNEL DOWN I[...]

Appendix Using the universal remote contr ol Y ou can operate the connected A V products (DVD player/recor der , SetT opBox, VCR and others) by setting up your remote contr ol as a universal remote control unit. NOTE • Some manufacturer code indicated in the operational manual and the universal remote contr ol device do not correspond. When r eco[...]

Appendix DVD Manufacturer Code United 001 Voxson 001 Vtrek 159 Wharfedale 104 105 130 Wintel 152 Xbox 167 Xlogic 105 XMS 149 Y akumo 109 Y amada 109 Y amaha 006 013 123 137 164 230 Y amakawa 103 146 Yukai 001 Zenith 002 129 165 DVD Recorder Manufacturer Code JVC 057 058 059 060 LG 065 Panasonic 052 062 Philips 050 051 053 061 063 064 Sony 054 055 0[...]

Appendix VCR Manufacturer Code Sony 003 004 013 022 027 044 066 068 082 083 084 085 088 094 096 097 103 113 116 117 118 119 145 146 147 160 168 184 185 186 Soundwave 059 Standard 021 061 Starlite 059 123 Stern 061 Sunkai 051 Sunstar 026 049 Suntronic 026 049 Sunwood 055 Supra 059 126 Symphonic 026 055 T aisho 051 056 T andberg 061 070 T ansai 149 T[...]

Appendix Satellite Manufacturer Code Pye 051 Quadral 049 056 066 080 086 088 094 096 161 311 341 342 343 344 003 039 105 106 Quelle 044 053 079 001 040 Radiola 077 001 139 Radix 009 060 089 097 116 203 213 256 003 172 174 Rainbow 095 097 001 106 Red Star 049 088 Redpoint 093 001 113 Rex 334 RFT 077 078 080 154 002 106 139 RIT AR 288 Roadstar 004 Ro[...]

Appendix Specifications Item 46 o LCD COLOUR TV , Model: LC-46HD1E 52 o LCD COLOUR TV , Model: LC-52HD1E LCD panel 46 o Advanced Super View & BLACK TFT LCD 52 o Advanced Super V iew & BLACK TFT LCD Number of dots 6,220,800 dots (1920 g 1080 g 3 dots) Video Colour System P AL/SECAM/NTSC 3.58/NTSC 4.43/P AL 60 TV Function TV -Standard Analogu[...]

A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be tr eated separately and in accordance with legislation that requir es proper tr eatment, recovery and r ecycling of used ele[...]

SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fi tted with a non-rewir eable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked or ASA and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refi t the f[...]

LC-46HD1E LC-52HD1E LCD COLOUR TELEVISION LCD-F ARBFERNSEHGERÄT TÉLÉVISION COULEUR À ÉCRAN À CRIST AUX LIQUIDES (LCD) TELEVISORE A COLORI LCD ENGLISH DEUTSCH FRANÇAIS SHARP ELECTRÓNICA ESP AÑA S.A. Polígono Industrial Can Sant Joan Calle Sena s/n 08174 SANT CUGA T DEL V ALLÉS BARCELONA (ESP AÑA) SHARP CORPORA TION Printed in Spain Gedru[...]