Sharp LC 40E77UN инструкция обслуживания

SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORA TION Printed in Mexico Imprimé au Mexique Impreso en México TINS-E222WJZZ 09P04-MX-NM LC-40E67UN LC-40E77UN OPERA TION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN ENGLISH FRANÇAIS ESP AÑOL IMPORT ANT : Please read this operation manual befor e starting op[...]

Unit: inch (mm) Dimensional Drawings 15 3 / 4 (400) 15 3 / 4 (400) 8 23 / 64 (212) 4 7 / 32 (107) 4 37 / 64 (116) 12 13 / 16 (325) 38 7 / 8 (987) 34 61 / 64 (887.8) 27 1 / 16 (687) 24 11 / 32 (618) 2 47 / 64 (69) 15 41 / 64 (397) 20 3 / 4 (527) 19 45 / 64 (500.35) LC-40E67UN_E77UN_E_Hyo1-4.indd 2 LC-40E67UN_E77UN_E_Hyo1-4.indd 2 2009/03/12 16:37:09[...]

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “danger ous voltage” within the product's enclosure that may be of sufficient magnitude to constitu[...]

This product utilizes tin-lead solder , and fluor escent lamp containing a small amount of mercury . Disposal of these materials may be regulated due to envir onmental considerations. For disposal or recycling information, please contact your local authorities, the Electronic Industries Alliance: www .eiae.or g, the lamp recycling or ganization: w[...]

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This pr oduct has been engineered and manufactur ed with the highest priority on safety . However , impr oper use can result in electric shock and/or fir e. In order to pr event potential danger , please observe [...]

IMPORTANT SAFETY INSTRUCTIONS 4 Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to prope[...]

IMPORTANT SAFETY INSTRUCTIONS 5 CHILD SAFETY : It Makes A Differ ence How and Where Y ou Use Y our Flat Panel Display Congratulations on your purchase! As you enjoy your new pr oduct, please keep these safety tips in mind: THE ISSUE The home theater entertainment experience is a growing trend and larger fl at panel displays are popular purchases. [...]

6 1 Confi rm that there are 8 screws (4 short screws and 4 long screws) and a hex key supplied with the stand unit. 2 Attach the supporting post for the stand unit onto the base using the box for the stand unit as shown below. The supporting post attaches to the base at an off-centered location on the base. Be sure to attach the supporting post in[...]

7 30º 30º 30º 30º 17´ (5 m) Remote control sensor QUICK REFERENCE Using the Remote Control Unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. ■ Cautions regarding the remote control unit Do not expose [...]

8 Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. 1. A 75-ohm system is generally a round cable wi[...]

9 IMPORTANT INFORMATION ..................................1 Trademarks ..............................................................2 DEAR SHARP CUSTOMER .....................................3 IMPORTANT SAFETY INSTRUCTIONS ..................3 Supplied Accessories..............................................6 QUICK REFERENCE ......................[...]

10 Part Names TV (Front) OPC indicator (See page 21.) POWER indicator (See page 14.) Remote control sensor OPC sensor * (See page 21.) TV (Rear/Side) INPUT 3 terminals SERVICE terminal INPUT 5 terminal (HDMI) *1 *2 *3 *1 POWER button MENU button INPUT button Channel buttons ( CH U / V ) Volume buttons ( VOL k / l ) AC INPUT terminal RS-232C termina[...]

11 3 2 11 7 5 6 4 8 20 18 19 21 22 7 23 10 9 24 11 13 12 26 27 28 15 14 16 30 25 29 Part Names 1 TV POWER: Switch the TV power on or enter standby. (See page 14.) 2 DISPLAY: Display the channel information. 3 SOURCE POWER: Turns the power of the external equipment on and off. 4 External equipment operational buttons: Operate the external equipment.[...]

12 To enjoy the AQUOS 1080p display capability, connect your external equipment using a component cable and set the equipment to 1080p output. See page 13 for connecting a Blu-ray disc player, DVD player or a Digital TV STB to the HDMI terminal. The COMPONENT terminals take priority over the S-VIDEO (INPUT 2) terminal. • • • Connecting Audiov[...]

13 HDMI-certifi ed cable (commercially available) HDMI equipment HDMI-certifi ed cable (commercially available) Connecting HDMI Equipment You can use the INPUT 5, INPUT 6, INPUT 7 or INPUT 8 terminal when connecting HDMI equipment. Using Digital Audio Output It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 25 fo[...]

14 Turning On/Off the Power Press POWER on the TV, or TV POWER on the remote control unit to turn the power on. • POWER indicator (Green): The TV is on. (After a few seconds, a window appears with sound.) • The initial setup starts when the TV powers on for the fi rst time. If the TV has been turned on before, the initial setup will not be inv[...]

15 Direct Button Operation Sleep Timer Allows you to set a time when the TV automatically switches to standby. Press SLEEP . The remaining time displays when the sleep timer has been set. Each time you press SLEEP , the remaining time switches as shown below. Off 30 60 90 120 When set, the time automatically starts counting down. If you want to adj[...]

16 AV MODE AV MODE gives you several viewing options to choose from to best match the surrounding environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of image input from external equipment. Press AV MODE . Current AV MODE displays. Press AV MODE again before the mode displayed on the screen[...]

17 POWER SAVING Allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan. Press POWER SAVING . Each time you press POWER SAVING , the mode changes as shown below. Off Standar d Advanced You can have the same settings by choosing "Power Saving" on the menu items. (See page 23.)[...]

18 Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE . The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu. You can sequentially selec[...]

19 Menu Items Some menu items may not be displayed depending on the selected input source. • Picture Menu OPC ..................................................................................... Page 21 Backlight.............................................................................. Page 21 Contrast .......................................[...]

20 ENTER : Select : Enter MENU : Exit RETURN : Back Example Audio Only Input Select Color System Output Select AQUOS LINK Setup Digital Caption Setup Digital Caption Info. Program Title Display Favorite CH Operation Lock Out Demo Mode Identification Software Update Option 1 Item displayed in yellow • This indicates the item currently selected. ?[...]

21 On-Screen Display Menu OPC Setting Automatically adjusts the brightness of the screen. On(Display): Displays the OPC effect on the screen while adjusting the brightness of the screen. On: Automatically adjusts. Off: The brightness is fi xed at the value set in "Backlight". When set to "On", the Optical Picture Control (OPC) [...]

22 Film Mode (3:2 pull-down) Automatically detects a fi lm-based source (originally encoded at 24 frames/second), analyzes it then recreates each still fi lm frame for high-defi nition picture quality. On: Detects, analyzes, converts fi lm source. Off: Normal viewing mode. "Film Mode" is not selectable when channel display shows an in[...]

23 Setup Menu Example CH Setup Input Skip Input Label PC Setup PC Audio Select HDMI Auto View EZ Setup Parental CTRL Position Audio Setup Language Reset Setup 1 Press MENU to display the MENU screen, and then press c / d to select "Setup". 2 Press a / b to select a specifi c adjustment item, and then press ENTER . When you select "E[...]

24 CH Setup If initial setup does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all channels viewable in the set [...]

25 Position For adjusting a picture's horizontal and vertical position. H-Pos.: Centers the image by moving it to the left or right. V-Pos.: Centers the image by moving it up or down. For resetting adjustments to the factory preset values, press a / b to select "Reset", and then press ENTER . When connecting a PC to the HDMI terminal[...]

26 Parental CTRL (Parental Control Setting) Secret No. Allows you to use a secret number to protect certain settings from being accidentally changed. IMPORTANT: Three conditions must be met to enable the V-Chip (see pages 26 to 28): 1. Secret No. is registered. 2. V-Chip/V-Chip (DTV Only) settings have been made. The “V-Chip (DTV Only)” will on[...]

27 On-Screen Display Menu G: General audiences. All ages admitted. PG: Parental guidance suggested. Some material may not be suitable for children. PG-13: Parents strongly cautioned. Some material may be inappropriate for children under 13. R: Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions). NC[...]

28 ■ How to temporarily release the V-CHIP BLOCK When the V-CHIP BLOCK is working and censors a broadcast, "V-CHIP HAS BEEN ACTIVATED." displays. 1 Press ENTER while the V-CHIP is working, and then the secret number setting menu displays. 2 Input the 4-digit secret number by using 0 - 9 . At this time V-CHIP BLOCK temporarily releases. [...]

29 On-Screen Display Menu Option Menu Audio Only Input Select Color System Output Select AQUOS LINK Setup Digital Caption Setup Digital Caption Info. Program Title Display Favorite CH Operation Lock Out Demo Mode Identification Software Update Option Example 1 Press MENU to display the MENU screen, and then press c / d to select "Option"[...]

30 Favorite CH (Favorite Channel Setting) This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. To register your favorite channel: Select "Register" and then press ENTER . Press a / b / c / d to select the position in t[...]

31 On-Screen Display Menu 4 Input the 4-digit secret number by using 0 – 9 . Please enter password. 5 Press ENTER to start checking the data in the USB memory device. Insert the USB memory device containing the software update file. Use SERVICE port near the INPUT3. OK 6 During the data checking, “Checking” blinks. Checking Now checking the [...]

32 Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit. Other Viewing Options Presetting manufacturer codes After the LED for your device lights up, press FUNCTION and DISPLAY at the same time to ent[...]

33 Manufacturer codes REMOTE CONTROL CODE NUMBER Other Viewing Options VCR BRAND REMOTE CONTROL CODE NUMBER DVD/BD/LD BRAND REMOTE CONTROL CODE NUMBER CATV/SAT BRAND • Numbers marked with * are SAT codes, all others are CATV codes. AUDIO BRAND REMOTE CONTROL CODE NUMBER LC-40E67UN_E77UN_E.indb 33 LC-40E67UN_E77UN_E.indb 33 2009/03/13 16:20:25 200[...]

34 Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifi er, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certifi ed cables to [...]

35 AQUOS LINK Setup 1 Press MENU to display the MENU screen, and then press c / d to select "Option". 2 Press a / b to select “AQUOS LINK Setup”, and then press ENTER . 3 Press a / b to select a specifi c item, and then press ENTER . 4 Press a / b (or c / d ) to select the desired setting, and then press ENTER . 5 Press MENU to exit.[...]

36 AQUOS LINK Menu Recorder EPG T op menu/title list Media change By AQUOS AUDIO SP By AQUOS SP Sound mode change Setup menu Model select AQUOS LINK Timer Recording You can call up the AQUOS LINK-compatible recorder’s EPG and preset timer recordings using the TV’s remote control. 1 Press OPTION to display the AQUOS LINK MENU screen. 2 Press a /[...]

37 Playback of Titles Using AQUOS LINK This section explains how to play back a title in the AQUOS LINK-compatible equipment. 1 Power on the AQUOS LINK-compatible equipment, and select appropriate external input. 2 Press OPTION to display the AQUOS LINK MENU screen. 3 Press a / b to select “Top menu/title list”, and then press ENTER . The title[...]

38 Appendix Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching the stand • Before performing work, make sure to turn off the TV. • Before performing wor[...]

39 Troubleshooting Troubleshooting-Digital Broadcasting The error message about reception of broadcast The example of an error message displayed on a screen Possible Solution • Failed to receive broadcast. • Check the antenna cable. Check that the antenna is correctly setup. • No broadcast now. • Check the broadcast time in the program guid[...]

40 Appendix ■ PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. • This operation system should be used by a person who is accustomed to using computers. ■ Communication conditions Set the RS-232C communication settings on the PC to match the TV's co[...]

Item Model: LC-40E67UN Model: LC-40E77UN LCD panel 40 o Class (40 o Diagonal) Advanced Super View & BLACK TFT LCD Resolution 2,073,600 pixels (1,920 g 1,080) TV Function TV-standard (CCIR) American TV Standard ATSC/NTSC System Receiving Channel VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled channel only) Digital Terrestrial Broadca[...]

42 • As a precautionary measure, make a note of your secret number above, cut it from this manual, and keep it in a safe place. The secret number is . CLEARING THE SECRET NUMBER If you forget the secret number, clear the secret number using the following procedure. 1 Select an item from the list below to display the secret number input screen. (F[...]

43 CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the “Product”), when shipped in its original container , will be free from defective workmanship and materials, and agr ees that it w ill, at its option, either repair the defect or r eplace[...]

Unit: inch (mm) Dimensional Drawings 15 3 / 4 (400) 15 3 / 4 (400) 8 23 / 64 (212) 4 7 / 32 (107) 4 37 / 64 (116) 12 13 / 16 (325) 38 7 / 8 (987) 34 61 / 64 (887.8) 27 1 / 16 (687) 24 11 / 32 (618) 2 47 / 64 (69) 15 41 / 64 (397) 20 3 / 4 (527) 19 45 / 64 (500.35) LC-40E67UN_E77UN_E_Hyo1-4.indd 2 LC-40E67UN_E77UN_E_Hyo1-4.indd 2 2009/03/12 16:37:09[...]

SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORA TION Printed in Mexico Imprimé au Mexique Impreso en México TINS-E222WJZZ 09P04-MX-NM LC-40E67UN LC-40E77UN OPERA TION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN ENGLISH FRANÇAIS ESP AÑOL IMPORT ANT : Please read this operation manual befor e starting op[...]