Sanyo PLC-XU46 инструкция обслуживания

Multimedia Pr ojector MODEL PLC-XU46 Owner’ s Man ual[...]

2 C AU TI O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT[...]

3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions [...]

4 COMPLIANCES A C P ower Cord f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the pl[...]

5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 14 COMPUTER INPUT 22 VIDEO INPUT 29 SETTING 34 APPENDIX 37 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 POSITIONING PROJECTOR 9 ADJUSTABLE FEET 9 INSTALLING PROJECTOR IN PROPER POSITION 10 MOVING PROJECTOR 10 CONNECTING PR OJECT OR 11[...]

6 FEA TURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector widely accepts various video and co[...]

7 PREP ARA TION NAME OF EA CH P AR T OF PROJECT OR BO TT OM BACK CAUTION Hot air is exhausted from the exhaust vents. When using or installing the projector, the following precautions should be taken. ● Do not put any flammable object near these vents. ● Keep front grills at least 3 ’ (1m) away from any object, especially heat- sensitive obje[...]

NO TE ON THE PO WER CORD AC Power Cord must meet requirement of the country where you use a projector. Confirm an AC plug type with the chart below and proper AC Power Cord must be used. If supplied AC Power Cord does not match your AC outlet, contact your sales dealer. SETTING-UP PR OJECT OR 8 PREP ARA TION To POWER CORD CONNECTOR on your projecto[...]

9 PREP ARA TION POSITIONING PR OJECT OR ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted up to 15.6 degrees. ADJUSTABLE FEET FEET LOCK LATCHES CA UTION Tilt the projector within the adjustable range in order not to shorten the life of the lamp. Proper angle should be ta[...]

10 PREP ARA TION CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR ● Do not drop or bump the projector, otherwise damages or malfunctions may result. ● When carrying the projector, use a suitable carrying case. ● Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to[...]

11 CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 11 to 13 and connect properly. S – VIDEO R – AUDIO IN – L VIDEO Y – Pb / Cb – Pr / Cr RESET CONTROL PORT USB AUDIO IN COMPUTER R – – L AUDIO OUT (MONO) COM[...]

12 CONNECTING PR OJECT OR CONNECTING T O COMPUTER R – AUDIO IN – L VIDEO Y – Pb / Cb – Pr / Cr S – VIDEO RESET CONTROL PORT USB AUDIO IN COMPUTER R – – L AUDIO OUT (MONO) COMPUTER IN DVI - I MCI / WI MONITOR OUT IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA) DVI-VGA Cable Monitor Output Desktop type Laptop typ[...]

13 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQUIPMENT S – VIDEO R – AUDIO IN – L VIDEO Y – Pb / Cb – Pr / Cr RESET CONTROL PORT USB AUDIO IN COMPUTER R – – L AUDIO OUT (MONO) COMPUTER IN DVI - I MCI / WI MONITOR OUT Video Source (example) Video Cassette Recorder Video Disc Player Video Cable (RCA x 1) S-VIDEO Cable Audio Amplifier [...]

14 BEFORE OPERA TION V OLUME ON-OFF FOCUS ZOOM D.ZOOM MENU MUTE NO SHO W FREEZE A UTO PC ADJ. IMA GE P-TIMER LOCK INPUT KEYST ONE OPERA TION OF REMO TE CONTROL ON ALL OFF ALL-OFF SWITCH Left Side When using the Remote Control, turn this switch to “ ON. ” And turn it to “ ALL OFF ” when it is not used. Used to select input source. (P22, 29) [...]

15 BEFORE OPERA TION To insure safe operation, please observe the following precautions : ● Use (2) AA, UM3 or R06 type alkaline batteries. ● Replace two batteries at the same time. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the Remote Control to moisture, or heat. ● Do not drop[...]

16 ON -- OFF L A M P R E P L A C E W A R N I N G T E M P . R E A D Y L A M P INPUT IMA GE MENU V OLUME – VOLUME + SELECT ZOOM FOCUS BEFORE OPERA TION T OP CONTROLS AND INDICA T ORS Used to open or close MENU operation. (P17, 18) MENU BUTTON IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON – OFF BUTTON INPUT BUTTON WARNING TEMP. INDICATOR LAM[...]

17 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION OPERA TING ON-SCREEN MENU MENU BAR POINTER (red frame) MENU ICON ITEM DATA Press POINT LEFT/RIGHT buttons to adjust value or set function. SELECT BUTTON POINTER (red frame) Press POINT DOWN button to move POINTER. ITEM Used to select the item. SELECT BUTTON Use[...]

18 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P22) IMAGE ADJUST MENU Used to adjust computer image. [Contrast / Brightness / White Balance (R/G/B) / Gamma] (Refer to P27) SETTING MENU Used to change settings of the projector or reset Lamp Replace Counter. (Refer to P34, 35) SOUND MENU Used to adjust volume [...]

19 B ASIC OPERA TION TURNING ON PR OJECT OR TURNING ON / OFF PR OJECT OR Connect the projector's AC Power Cord into an AC outlet. The LAMP Indicator lights red, and the READY Indicator lights green. Press the POWER ON-OFF button on the Top Control or on the Remote Control to ON. The LAMP Indicator dims, and the Cooling Fans start to operate. T[...]

20 Press the FREEZE button on the Remote Control to freeze the picture on-screen. To cancel the FREEZE function, press the FREEZE button again or press any other button. PICTURE FREEZE FUNCTION KEYST ONE ADJUSTMENT 1 Press the KEYSTONE button on the Remote Control or select Keystone in the SETTING menu. (Refer to page 34.) The keystone dialog box a[...]

21 B ASIC OPERA TION Press the NO SHOW button on the Remote Control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. NO SHO W FUNCTION Message disappears after 4 seconds. No show Press the P-TIMER button on the Remote Control. The timer display “ 00 : 00 ” appears on the screen and the time[...]

22 COMPUTER INPUT SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose Computer by pressing the INPUT button on the Top Control or on the Remote Control. If the projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT[...]

23 COMPUTER INPUT PC ADJUSTMENT A UT O PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the r[...]

24 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune the display signals from most personal computers currently distributed. However, some computers employ the special signal formats which may not be turned by Multi-Scan system of this projector. In this case, the image may be recognized as a flickering picture, a non-synch[...]

25 COMPUTER INPUT NOTE : Fine sync, Total dots, Display area (H/V), and Full screen cannot be adjusted when “ 1035i (HDTV) ” or “ 1080i (HDTV) ” is selected in the PC SYSTEM Menu (P22). Selects the area displayed by this projector. Select the resolution at the Display area dialog box. Display area Adjustment of the horizontal area displayed[...]

26 COMPUTER INPUT PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the IMAGE SELECT Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to the level that you want to set and then press the SELECT but[...]

27 COMPUTER INPUT Press the POINT LEFT/RIGHT buttons to adjust value. Reset all adjustment to their previous levels. Reset Store Closes the IMAGE MENU. Quit Other icons operate as follows. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the IMAGE ADJUST Menu icon. 1 2 Pre[...]

28 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SCREEN Menu icon. When Digital zoom + is selected, the ON-SCREEN M[...]

29 VIDEO INPUT SELECTING INPUT SOURCE MENU OPERA TION DIRECT OPERA TION Choose Video by pressing the INPUT button on the Top Control or on the Remote Control. If the projector cannot reproduce proper video source, select correct input source through MENU OPERATION (see below). Press the MENU button and the ON-SCREEN MENU will appear. Press the POIN[...]

30 VIDEO INPUT AV SYSTEM MENU (VIDEO OR S-VIDEO) AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to move the red frame pointer to the AV SYSTEM Menu icon. Press the POINT DOWN button to move the red arrow pointer to the system that you want to selec[...]

31 VIDEO INPUT PICTURE IMA GE ADJUSTMENTS IMA GE LEVEL SELECT (MENU) Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button to move the red frame pointer to the IMAGE SELECT Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to the level that you want to set and then press the SELECT button[...]

32 VIDEO INPUT Press the POINT LEFT/RIGHT buttons to adjust value. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the IMAGE ADJUST Menu icon. 1 2 Press the POINT DOWN button to move the red frame pointer to the item that you want to adjust and then press the SELECT but[...]

33 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT button(s) to move the red frame pointer to the SCREEN Menu icon. Press the POINT DOWN button and move the red frame [...]

34 SETTING SETTING MENU Ceiling When this function is “ On, ” the picture is top / bottom and left / right reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is “ On, ” the picture is left / right reversed. This function is used to project the image to a rear projection screen[...]

35 SETTING This function turns the Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.) The Power Management function operates to turn the Projection Lamp off when the input signal i[...]

36 APPENDIX LAMP REPLA CEMENT LAMP REPLA CE When the life of the Projection Lamp of this projector draws to an end, the LAMP REPLACE indicator lights yellow. If this indicator lights yellow, replace the projection lamp with a new one promptly. LAMP ASSEMBLY HANDLE LAMP COVER ORDER REPLA CEMENT LAMP Replacement Lamp can be ordered through your deale[...]

37 APPENDIX LAMP REPLA CE COUNTER Be sure to reset the Lamp Replace Counter after the Lamp Assembly is replaced. When the Lamp Replace Counter is reset, the LAMP REPLACE Indicator stops lighting. NOTE : Do not reset the Lamp Replace Counter before the Projection Lamp is replaced. Turn the projector on, press the MENU button and the ON- SCREEN MENU [...]

38 APPENDIX OPERA TING WIRELESS MOUSE INST ALLA TION The Wireless Remote Control is not only able to operate this projector but is also usable as a Wireless Mouse for most Personal Computers. The POINT button and two CLICK buttons are used for wireless mouse operation. This Wireless Mouse function is available only when PC mouse pointer is displaye[...]

39 APPENDIX CLEANING PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. When the projector is not in use, replace the Lens Cover. 1 3 Lightly wipe a cleaning cloth over the Projection Lens. [...]

40 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the items below once again. ● Make sure you have connected the projector to peripheral equipment as described properly in the section "CONNECTING PROJECTOR" on pages 11 ~ 13. ● Verify that all computer, video and power cord are properly co[...]

41 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact the sales dealer where you purchased the projector or the service center. Give the model number and explain about the problem. We will advise you how to obta[...]

42 APPENDIX INDICA T ORS AND PROJECT OR CONDITION Check the Indicators for projector condition. • • • on • • • dim • • • off • • • flashing ✽ When the life of the projection lamp draws to an end, the LAMP REPLACE indicator lights yellow. When this indicator lights yellow, replace the projection lamp with a new one promptly[...]

43 APPENDIX COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 140 MHz of Dot Clock. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37[...]

44 APPENDIX TECHNICAL SPECIFICA TIONS 0.9" TFT Active Matrix type, 3 panels Multi-media Projector 9.7 lbs (4.4 kg) 13.11" x 3.52" x 9.96" (333mm x 89.5mm x 253mm) (not including Adjustable Feet) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43, PAL-M and PAL-N H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz[...]

45 APPENDIX CONFIGURA TIONS OF TERMINALS MONITOR OUT TERMINAL (ANALOG) Terminal : HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V Power Horiz. sync. Ground (Vert.sync.) DDC Data Sense 0 Vert. sync. DDC Clock 9 13 10 12 11 14 15 [...]

46 Terminal : Mini DIN 8-PIN 1 2 3 4 5 8 7 6 Pin Configuration CONTROL PORT CONNECTOR ----- CLK DATA GND ----- ----- GND ----- R X D ----- ----- GND RTS / CTS T X D GND GND ----- ADB ----- GND ----- ----- ----- GND PS/2 Serial ADB 1 2 3 4 5 6 7 8 Vcc - Data + Data Ground 1 2 3 4 USB CONNECTOR (Series B) Pin Configuration 2 34 1 APPENDIX OPTIONAL P [...]

47[...]

Printed in Japan Part No. 610 304 4750 (1AA6P1P3765-- MF3A) SANY O Electric Co., Ltd[...]