Sanyo PLC-XTC50AL инструкция обслуживания

*Projection lens is optional. Multimedia Pr oject or MODEL PLC-XTC50AL Owner ’ s Manual[...]

2 ◆ Functionally Ric h This projector has man y useful functions such as lens shif ting , ceiling and rear projection, perpendicular omnidirectional projection, variety of lens options, etc. ◆ A uto Lamp Selection S ystem The projector is equipped with 2 projection lamps and automatically switc hes the activ e lamp between 2 lamps.(p.64) ◆ Mu[...]

3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Feat ures and Design ................ 2 T able of Contents .................. 3 T o the Owner ..................... 4 Saf ety Instr uctions ................. 5 Air Circulation 6 Installing the Projector in[...]

4 CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SER VICING T O QU ALIFIED SER VICE PERSONNEL. THIS S YMBOL INDICA TES THA T DANGER OUS V OL T A GE CONSTI TU TING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT . THIS S YMBOL INDICA TES THA T[...]

5 All the saf et y and operating instructions should be read before the product is operated. Read all of the instr uctions given here and retain them for later use. Unplug this projector from A C po wer supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ollow all warnings and instr uctions marked on the [...]

6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating , these openings must not be bloc ked or co vered. CA UTION Hot air is exhausted from the e xhaust v ent. When using or installing the projector , the follo wing precautions should be taken. – Do not put any fl[...]

7 Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, down ward, or inclined position in perpendicular direction to the horizontal plane. Installing the Projector in Proper Directions ✔ Note:  •T [...]

8 Use the hand grip when moving the projector . Replace the lens cap and retract the adjustable f eet to prev ent damage to the lens and cabinet when carr ying . When the projector is not in use for an e xtended period, put it into a suitable case to protect the projector . CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bum[...]

9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug. Should the fuse need to be replaced, an A ST A approv ed BS 1 362 fuse must be used of the same rating , marked thus A S A . If the fuse cov er is detac hable, nev er use the[...]

!1 Infrar ed Remote Receiv er (Bac k) !2 Lamp Cover !3 Filter Cov er !4 Exhaust V ent !5 Security Chain Hook !6 Air Intake V ent !7 Hand Gr ip 10 Bottom Back q Lens Release Butt on w Infrar ed Remote Receiver (T op&Fr ont) e T er minals and Connectors r T op Controls and Indicators t Lens Cover y Speak er u Projection Lens(Opt[...]

11 Side T erminal q w e r t i u y A UDIO 2 J ACK Connect the audio output (stereo) signal from a computer or video equipment connected to i to this jac k (p.22). t A UDIO 1 J ACK Connect the audio output (stereo) signal from a computer or video equipment connected to q or w to this jac k (p.22). u A UDIO 3 J ACKS (L(MONO)/R) Connect the au[...]

12 !1 R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). Side T erminal P art Names and F unctions !0 USB CONNECT OR (Ser ies B) Use this connector when controlling a computer with the remote control of the projector . Connect the USB terminal of your compu[...]

13 q w e t u i o q W ARNING TEMP . indicat or – Lights red light when the projector detects an abnormal condition or the filter cartridge is not installed. – Blinks red when the internal temperature of the projector ex ceeds the operating range (pp.67 , 7 6). r ON/ST AND-B Y button T urn the projector on or off (pp.24–25). t INPUT b[...]

14 q ST AND-B Y butt on T urn the projector of f (p.25). t ON button T urn the projector on (p.24). y INPUT 1 – 3 but tons Select an input source (INPU T 1 – INPU T 3) (pp.34– 35). u A UT O PC button Automatically adjusts the computer image to its optimum set ting (pp.30, 38). i FREEZE button F reeze the pict ure on the screen (p.30). o[...]

15 Remote Control !9 !5 !3 !4 !8 !6 !7 @0 !3 MENU button Open or close the On-Screen Menu (p.26). !6 ZOOM ed butt ons Zoom in and out the images (p.30). !5 D.ZOOM but ton Select the Digital zoom +/- mode and resize the image (pp.30,47). @0 FOCUS butt on Adjust the focus (pp.28,30). !8 MUTE butt on Mute the sound (p.29). !4 P -TIMER b[...]

16 T o ensure saf e operation, please obser ve the f ollowing precautions : l Use two (2) AAA or LR03 type alkaline bat teries. l Alwa y s replace bat teries in sets. l Do not use a new bat ter y with a used bat ter y . l A void contact with water or liquid. l Do not expose the remote control to moist ure or heat. l Do not drop th[...]

17 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interf erence from other remote controls when sev eral projectors or video equipment next to eac h other are operated at the same time. Change the remote control code for the projector first before c hanging[...]

18 Installation Projection angle can be adjusted up to 3.5 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector , rot ate the both f eet cloc kwise. T o low er the projector or to retract the adjustable f eet, rotate the both f eet countercloc kwise. T o correct k ey stone [...]

19 When replacing the lens or using an optional lens, install the lens by follo wing the instructions below . Ask the sales dealer for detailed information of the optional lens specifications. Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector . Remo ve the lens mount cov er . 1 2 At tac hing the len[...]

20 Connecting to a Computer (Digital and Analog RGB) Cables used for connection )( * =Cables are not supplied with this projector .) • V G A Cable (Mini D-sub 1 5 pin) (One cable is supplied)* • D VI-Digit al Cable * • Serial Control Cable * • BNC Cable * • USB Cable * D VI-Digital cable USB cable USB port USB Unplug the pow er cords of b[...]

21 Connecting to V ideo Equipment (Video, S-video, Component and RGB Scart) Cables used for connection • Video Cable (RCA x 1) • V G A-Scart Cable • S-VIDEO Cable • BNC Cable • D VI-Digit al Cable (Cables are not supplied with the projector .) VIDEO S-VIDEO S-video cable Composite Video Output S-video Output VIDEO Unplug the pow er cords [...]

22 Connecting for Audio Signal Cables used for connection • A udio Cable (Mini Plug [stereo] x 2) • A udio Cable (RCA x 2) (Cables are not supplied with the projector .) External A udio Equipment Audio cable (stereo) Audio Input Audio Output A UDIO O U T (stereo) Audio cable (RCA) A UDIO IN Unplug the pow er cords of both the projector and exte[...]

23 NO TE ON THE POWER CORD A C pow er cord must meet the requirements of the countr y where you use the projector . Confirm the A C plug t ype with the c hart below and proper A C pow er cord must be used. If the supplied A C pow er cord does not matc h your A C outlet, contact your sales dealer . T o power cord connector on your projector . Pr oje[...]

24 Connect the projector’ s A C pow er cord into an A C outlet. The PO WER indicator lights red. Press the ON/S T AND-B Y but ton on the top control or the ON but ton on the remote control. The PO WER indicator t urns green and the cooling fans start to operate. The preparation displa y appears on the screen and the count down starts. 2 3 1 16 Th[...]

25 Basic Oper ation Press the ON/S T AND-B Y but ton on the top control or the ST AND-B Y but ton on the remote control, and “P ow er of f?” appears on the screen. Press the ON/S T AND-B Y but ton or the ST AND-B Y but ton on the remote control again to turn of f the projector . The PO WER indicator st arts to blink red af ter 5 seconds. Af ter[...]

26 T op Contr ol Menu bar P oint er (red fr ame ) Menu icon Item data Press the P oint 7 8 but tons to adjust the value. SELECT butt on P oint er (red fr ame ) Press the P oint ed buttons to mov e the pointer . Item How to Operate the On-Screen Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu Quit Exit this menu. The projector can be[...]

27 Menu Bar Syst em Select a computer or video system mode (pp.36, 37). Image Adjust Adjust the pict ure image (pp.42–44). – Contrast – Brightness – <Color> – <Tint> – Color temp. – White balance (R/G/B) – Sharpness – Gamma – <Noise reduction> – <Progressiv e> – Reset – Store – Quit Set ting Menu [...]

28 The f ollowing lens operation can be made with the Lens but ton on the top control. Press the L ens but ton to enter eac h lens operation mode. The selected adjustment displa y appears on the screen. Zoom ➜ F ocus ➜ Lens Shif t ➜ • • • • • Operating with Projector Control Display “Lens shif t” on the screen. Use the P o[...]

29 1 2 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Sound Menu icon. Press the V OLUME+/– but tons on the top control or on the remote control to adjust the volume. T he volume dialog box appears on the screen for a f ew seconds. Press the MU TE but ton on the remote contro[...]

30 Remote Contr ol Operating with Remote Control Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pict ure on the screen. T o cancel the [...]

31 Press the P -TIMER but ton on the remote control. The P -Timer display “0 0:0 0” appears on the screen and the countdo wn starts (0 0:0 0–59:59). T o stop the countdown, press the P -TIMER but ton. T o cancel the P -Timer function, press the P-TIMER but ton again. P -TIMER but t on P -Timer displa y ✔ Note:  • Seethepreviou[...]

32 Spotlight Pointer Function P ointer ✔ Note:  • Y oucanc hoosethesizeofSpotlight(Large/Middle/ Small)andthepat ternofP ointer(Arrow/Finger/Dot) intheSet tingMenu.See “Pointer”onpage54. This remote control emits a laser beam from the laser light windo w . Press the LA [...]

33 Mov e the pointer on the screen with this but ton. PRESENT A TION POINTER butt on R-CLICK butt on L -CLICK butt on Act as right (clic k) mouse but ton while the projector and a computer are connected with a USB cable. Act as lef t (clic k) mouse but ton while the projector and a computer are connected with a USB cable. Wireless Mouse Operation T[...]

34 Remote Contr ol INPUT butt ons T op Contr ol Input Press the INPU T 1, INPU T 2, or INPU T 3 but tons on the remote control. The input source appears on the screen as you press eac h but ton. Select the connected input source. Remote Contr ol Operation INPUT butt on Press the INPU T but ton on the top control. It switc hes to INPU T 1, INPU T 2,[...]

35 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Input Menu icon. 1 Use the P oint ed but tons to mo ve the red ar ro w pointer to the desired input and then press the SELECT but ton. The signal f ormat menu appears. 2 Use the P oint ed but tons to select the desired signal fo[...]

36 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V Sy stem Menu icon. 1 V ideo System Selection A V Syst em Menu (V ideo or S-video) A V Syst em Menu (Component) Use the P oint ed but tons to move the red arro w pointer to the desired system and then press the SELECT but to[...]

37 The Auto PC A djustment function operates to adjust the projector . PC Syst em Menu The PC S ystem Menu icon Selected system is displayed. Sy stems in this dialog box can be selected. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC S ystem Menu icon. Use the P oint ed but [...]

38 A uto PC A djustment function is provided to automatically adjust Fine sync, T ot al dots, Horiz ontal and V ertical positions to conform to y our computer . Mov e the red frame pointer to Auto PC A dj. and press the SELECT button. “Please wait... ” appears while the Auto PC adjustment is in process. PC Adjust Menu PC A djust Menu icon T o s[...]

39 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the PC Adjust Menu icon. 1 2 Use the P oint ed but tons to mo ve the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x. Use the P oint 7 8 but tons to adjust the set ting v[...]

40 Use the P oint 7 8 but tons to adjust the horizontal area display ed b y this projector . Display ar ea H Use the P oint 7 8 but tons to adjust the vertical area display ed b y this projector . Display ar ea V Reset Stor e Exit the PC A djust Menu. Quit T o store the adjusted data, select Store and then press the SELECT but ton. Mov e the red ar[...]

41 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Image Menu icon. 1 2 Use the P oint ed but tons to mo ve the red frame pointer to the desired image lev el and then press the SELECT but ton. Mov e the red frame pointer to the desired image lev el and press the SELECT but ton. [...]

42 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mo ve the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog bo x. Use the P oint 7 8 but tons to adjust the set ti[...]

43 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 1 5). Shar pness ✔ Notes:  • Progressivecannotbeselectedwhen4[...]

44 T o store the adjusted data, select Store and press the SELECT but ton. Use the P oint ed but tons to select one from Image 1 to 4 and press the SELECT but ton. A confirmation box appears and then select [Y es]. Stored data can be called up by selecting an “Image (1–4)” in the Image Le vel Selection on page 41 . T o reset the adjusted data[...]

45 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to mo ve the red frame pointer to the desired function and then press the SELECT but ton. 2 Screen Adjustment Mov e the red frame pointer to the desired function and press the SELEC[...]

46 Wide Pro vide the image to fit the screen size. Nor mal T rue Pro vide the image in its original size. When the original image size is larger than the screen siz e (1 024 x 7 68), the projector enters to the panning mode automatically . Use the P oint ed7 8 but tons to pan the image. When adjusted, the arro ws will t urn red. When reac hed to th[...]

47 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +”appears. P ress the SELECT but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. The P anning function can work only when the image is larger than the screen size. Y ou can also enter the Digital zoom + mode b y pressing the D .ZOOM but ton on th[...]

48 Screen Size Adjustment (V ideo, Component Signals) Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to mo ve the red frame pointer to the desired function and then press the SELECT but ton. 2 Pro vide the image at the 4:3 normal v[...]

49 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a v ailable in English, German, F renc h, It alian, Spanish, P ortuguese, Dutc h, Sw edish, Russian, Chinese, K orean, and Japanese. Use the P oint ed b[...]

50 Captur e This function enables y ou to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT but ton. A confirmation box appears and select [Y es] to capture the projected image. Af ter capturing the projected image, go to the L ogo select function and set it to “[...]

51 Enter a Log o PIN code Af ter a correct Logo PIN code is entered, the follo wing dialog box appears. Change the Log o PIN code Logo PIN code can be c hanged to your desired four -digit number . Press the P oint d but ton to select “Logo PIN code c hange ” and then press the SELECT but ton. The New L ogo PIN code input dialog box appears. Set[...]

52 Set ting Set the red frame pointer to the item and press the SELECT but ton. Use the P oint ed but tons to set the Lamp mode. Select from (Lamp1, Lamp2 or Lamp 1/2). Select [Y es] to activate it. This P rojector is equipped with 2 Projection Lamps. This function allows y ou to c hoose how to use the lamp as f ollo ws. Lamp1............ Alw ay s [...]

53 Lamp contr ol This function allo ws y ou to c hange brightness of the screen. Auto 1 ......... The brightness according to the input signal (between Normal and Eco mode). Auto 2 ......... The brightness according to the input signal (between High and Eco mode). High ............ Brighter than the Normal mode. Normal ....... Normal brightness Eco[...]

54 Set ting P ointer Y ou can emphasiz e a part of the projected image with this function. Use the P oint ed but tons to c hoose either Spotlight or P ointer and press the SELECT but ton. Then use the P oint 7 8 but tons to select a size of the Spotlight (Large, Middle, or Small) or a pat tern of the P ointer (Arrow , Finger , or Dot). (See page 32[...]

55 Set ting Display This function decides whether to displa y On-Screen Displays. On ............................ Sho w all the On-Screen display s. Use this function when y ou want to project images af ter the lamp becomes bright enough. The f actor y default set ting is in this option. Countdown Of f ........ Show the input image instead of the c[...]

56 Set ting Press the SELECT but ton at P ower management and this dialog box appears. Use the P oint 7 8 but tons to c hoose one of the three options. Press the P oint d button to select the timer , and then use the P oint 7 8 but tons to set timer . P ower manag ement Select one of the follo wing options: Ready ................. When the lamp has[...]

57 Set ting Shutt er Shut ter function is av ailable to bloc k out light to the screen, so that the screen can be used for the other presenters. Prohibits the shut ter operation from the remote control and the projector's top control. Remote control ... Selecting "On" prohibits the shut ter operation from the remote control. Projecto[...]

58 Set ting Change the PIN code loc k setting Use the P oint 7 8 but tons to switc h bet ween the options. Use the P oint 7 8 but ton to select Off , On1, or On2 and then mov e the pointer to “Quit” with the P oint d but ton. Press the SELECT but ton to close the dialog box. Change the PIN code loc k setting Enter a PIN code PIN code lock This [...]

59 The PIN code can be c hanged to your desired four -digit number . Press the P oint d but tons to select “PIN code c hange ” and press the SELECT but ton. The New PIN code input dialog box appears. Set a ne w PIN code. Change the PIN code Chang e the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN THE NEW PIN CODE IN COLUM[...]

60 F actory def ault This function ret urns all set ting values e xcept for the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , and filter counter to the factory default set tings. Exit the Set ting Menu. Quit Select Factory default and this box appears. Select [Y es], and the next bo x appears. Select [Y es] to activate it. F actory[...]

61 Maint enance and Car e Filter Instructions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef fectiv eness and ma y result in internal heat buildup and adversely af f ect the life of the projector . This projector has an [...]

62 T urn of f the projector , press the Main On/Of f S witc h to Of f and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Slide and open the Filter cov er . (See the right figure.) 3 Put the ne w one bac k into the position until it clic ks and close the filter cov er . Make su[...]

63 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to mov e the red frame pointer to Filter counter and then press the SELECT but ton. A dialog box appears [...]

64 Auto Lamp Selection System This P rojector is equipped with 2 Projection Lamps. The Lamp Management F unction detects the st atus of lamps and shows the stat us on screen or on the LAMP 1/2 REPLA CE indicators. This function also automatically controls the Lamp Mode when any of lamps reac hes the recommended tot al hours of use or is out for the[...]

65 When the total lighting time of a Projection Lamp reac hes the recommended tot al hours of use, the Lamp replacement icon appears on the screen and LAMP 1 / 2 REPLA CE indicator lights yello w . Replace the lamp with a new one promptly . The timing when the LAMP 1 / 2 REPLA CE indicator should light is depending on the lamp mode. F ollow these s[...]

66 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. l Lamp lif e may dif fer from lamp to lamp and according to the environment of use. There is no guarantee of the same life for eac h lamp. Some lamps may fail or terminate their lif[...]

67 The WARNING indicators sho w the state of the function whic h protects the projector . Chec k the st ate of the W ARNING indicators and the PO WER indicator to take proper maintenance. W arning Indicators The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector reac hes a certain leve[...]

68 Unplug the A C pow er cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to clean the lens. A void using an e xcessiv e amount of cleaner . Abrasiv e cleaners, solvents, or other harsh c [...]

69 T roubleshooting Bef ore calling your dealer or ser vice center for assistance, c hec k the items below once again. – Make sure y ou hav e properly connected the projector to peripheral equipment as described on pages 20–22. – Make sure all equipment is connected to A C outlet and the pow er is t urned on. – When the projector does not p[...]

70 – Projecting from the e xcessiv e slant angle to the screen may cause ke y stone distortion and partial imperf ect focus. Pictur e is not br ight enough. – Chec k if "Contrast" or "Brightness" are adjusted properly See page 42. – Chec k if "Image level" is selected properly See page 41 . – Chec k the LAMP 1/[...]

71 Appendix This symbol on the nameplate means the product is Listed by Under writers Laboratories Inc. It is designed and manufact ured to meet rigid U.L. saf ety st andards against risk of fire, casualty and electrical hazards. The CE Mark is a Directiv e conformity mark of the European Community (EC). W ARNING : High voltag es are used t o oper [...]

72 Menu T ree Dynamic Real Cinema* Image 1 Image 2 Image 3 Image Input Go to Syst em (3) Go to Syst em (3) Video Go to Syst em (1) S-video Standard Quit Input 1 Go to Syst em (3) Video Go to Syst em (1) Input 2 RGB Go to Syst em (2) Component Image 4 RGB (PC analog) RGB (Scart) RGB (PC digital) RGB (A V HDCP) Quit Quit S Y STEM (3) S Y STEM (1) - -[...]

73 Language Setting 1 2 languages provided Blue/User/Blac k A uto 1/ Auto 2/High /Normal/Eco 1/Eco 2 Bac kground Lamp control Quit Capture Logo PIN code c hange Logo PIN code loc k Quit Quit Logo select Logo Of f/Default/User Y es/No On/Of f ✔ Note:  • TheMenudisplayvariesdependingontheinput signal. Of f/Ready/Shut[...]

74 Indicators and Projector Condition Chec k the indicators for the projector condition. The pr ojector is oper ating normally . • • • on • • • of f • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • blinking slow (approx. 2 seconds ON, 2 seconds OFF) • • • blinking fast (approx. 0.5 seconds ON[...]

75 The pr ojector is det ecting abnormal condition. Indicat ors Pr ojector Condition PO WER green / r ed W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . yello w The temperat ure inside the projector is elevated close to the abnormally high lev el. The temperat ure inside the projector is abnormally high. The projector cann[...]

76 The pr ojector is det ecting abnormal condition. Indicat ors Pr ojector Condition PO WER green / r ed W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . yello w If the Filter counter reac hed a time set in the timer set ting , a Filter replacement icon (Fig.2) appears on the screen and the WARNING FIL TER indicator on the [...]

77 Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 1 40 MHz of Dot Cloc k. Appendix ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Freq. (Hz) V GA 1 640x480 31 .470 59.880 V GA 2 720x400 31 .470 70.090 V GA 3 640x400 31 .470 70.090 V GA[...]

78 When an input signal is digital from the DVI terminal, ref er to the c hart below . PC Adjust Menu cannot be selected when Input 1 [R GB (PC digital)] is selected in the Input Menu. ✔ Notes:  • WhentheinputsignalisD-WXGA+1imagesmaynotbedisplayedproperlydependingon computers  • Specif[...]

79 T echnical Specifications Mechanical Inf ormation Projector T ype Multi-media Projector Dimensions (W x H x D) 21 .66” x 6.89” x. 1 7 .7 6” (451 .0 mm x 1 75.0 mm x 550.1 mm) Net Weight 32.4 lbs (1 4.7 kg) Feet Adjustment 0˚ to 3.5˚ P anel Resolution LCD Panel S ystem 1 .0” TFT Activ e Matrix type, 3 panels Panel Resolution 1,024 x 7 6[...]

80 Model No. Long Zoom Lens : LNS-T1 1 Short Fix ed Lens : LNS-W1 1 Standard Lens : LNS-S1 1 Long Zoom Lens : LNS-T1 0 Short Zoom Lens : LNS-W1 0 PJ-Net Or ganiz er Plus II : PO A-PN03A PJ-Net Or ganiz er Plus IIC : PO A-PN03C V GA -Cable(1 0 m) : KA-MC-DB1 0 Remote Contr ol Cable : PO A-CA-R C30 The parts listed belo w are optionally available. Wh[...]

81 Accessor ies Owner’ s Manual (CD-ROM) Quic k R ef erence Guide A C Po wer Cord Remote Control and B at teries V GA Cable USB Cable Lens Mount Co ver PIN Code Label Lens Antithef t Screw * * Contact the dealer where you purc hased the projector or the ser vice center about the Lens Antithef t Screw . This projector is compliant with PJLink Stan[...]

82 T er minal : D-sub 9 pin CONTROL POR T CONNECT OR Vcc - Data + Data Ground 1 2 3 4 2 3 4 1 INPUT 1/ANAL OG OUT T er minal: Analog RGB (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Configurations of T erminals USB CONNECT OR (Series B) D VI-D TERMINAL (DIGIT AL) 1 9 17 2 10 18 3 11 19 4 12 20 5 13 21 6 14 22 7 15 23 8 16 24 T .M.D .S. D[...]

83 W rite down the PIN code number in the column below and k eep it with this manual securely . If you f orgot or lost the number and unable to operate the projector , cont act the ser vice st ation. PIN Code Number Memo Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four -digit number be changed, the factory set num[...]

84 Dimensions 3.94 (100.0) 3.94 (100.0) 10.85 (275.5) 3.15 (80.0) 5.55 (141.0) 5.55 (141.0) 6.89 (175.0) 3.70 (94.0) (PANEL CENTER) 3.44 (87.3) 17.76 (451.0) 15.59 (396.0) 21.66 (550.1) 3.5 ° MAX Screw Holes f or Ceiling Mount Screw: M6 Depth: 0.393 (10.0) Unit: inc h (mm) Appendix[...]

SANY O Electric Co ., Ltd. KH7AM[...]