Samsung SU6760 инструкция обслуживания

V acuum Cleaner user manual SU67 SERIES ✻ Before operating this unit, please r ead the instructions carefully . ✻ For indoor use only . English imagine the possibilities Thank you for purchasing a Samsung pr oduct. T o receive a mor e complete service, please register your pr oduct at www .samsung.com/register[...]

2_ Safety Information IMPOR T ANT SAFEGUARDS Thank you for purchasing a Samsung vacuum cleaner . When using an electrical appliance, basic precautions should always be followed, including the following : PLEASE READ ALL WARNINGS AND INSTRUCTIONS BEFORE USING THIS V ACUUM CLEANER. WARNING : T o r educe the risk of fire, electric shock, or injury . [...]

Safety Information _3 Safety Information CAUTION/WARNING SYMBOLS USED • Before operating the appliance, please r ead this manual thoroughly and r etain it for your refer ence. • Because these following operating instructions cover various models, the characteristics of your vacuum cleaner may differ slightly fr om those described in this manual[...]

4_ contents contents ASSEMBLING THE CLEANER 05 05 Product V iew 06 Attach Handle to V acuum 06 Attach V acuum Hose and T ools OPERA TING THE CLEANER 07 07 Power Cord 07 Power Switch 08 Handle Positions 08 Height Adjustment 08 Petz Plus (Dual Brush System) 09 Cleaning T ools 09 Carrying Handle (Dust Bin Handle) MAINTENANCE 10 10 Empty Dust Bin 11 Cl[...]

01 ASSEMBLING THE CLEANER assembling the cleaner _5 assembling the cleaner • Do not plug in your vacuum cleaner until you are familiar with all instructions and operating procedur es. • Plastic lm can be dangerous. T o avoid danger of suf focation, keep away from babies and children. PRODUCT VIEW Handle ✽ Option Petz T urbo Brush Carrying [...]

6_ assembling the cleaner A TT ACH HANDLE TO V ACUUM A TT ACH V ACUUM HOSE AND TOOLS 1. Stand the vacuum upright and slide the base of the handle firmly into the grooves at the top of the vacuum body . 2. Check to be sure the handle is tted to the vacuum body . If there is a gap, continue to push rmly until the handle is flush. 3. Insert th[...]

02 OPERA TING THE CLEANER operating the cleaner _7 operating the cleaner POWER CORD POWER SWITCH 1. The power switch is located on the top of the vacuum body . Push the rocker switch “ON” to vacuum, and “OFF” when cleaning is complete. 1. PULLING OUT The power cord is long enough to be drawn out for convenience. 2. REWINDING Upon nishing[...]

8_ operating the cleaner HEIGHT ADJUSTMENT Petz Plus (Dual Brush System) 1. Place handle in upright position. 2. T ur n height adjustment knob to desired setting. Bare Floor - For no -carpeted, indoor surfaces. Lowest Setting - For short pile carpets Medium Setting - For short and medium pile carpets Highest Setting - For plush pile carpet HANDLE P[...]

02 OPERA TING THE CLEANER operating the cleaner _9 CLEANING TOOLS CARR YING HANDLE (DUST BIN HANDLE) Attachment tools can be used to clean furniture. drapes, stairs, or in corners. Place the vacuum on the oor with handle in the upright position while using attachment tools. Special handle for comfortable carrying from r oom to room or up and dow[...]

10_ maintenance maintenance For maximum cleaning performance, check and clean or replace all lters as suggested. T o reduce the risk of electr onic shock, turn Power Switch Off and disconnect polarized plug from electrical outlet befor e performing maintenance or troubleshooting checks. EMPTY DUST BIN 1) T o remove the dust bin fr om the cleaner[...]

03 MAINTENANCE maintenance _11 The Pre-Motor Filter may be hand washed in cold water with mild detergent. Rinse well and air dry throughly befor e re-installing. Inspect the exhaust lter regularly for dust accumulation, and clean if necessary . The Micro foam lter will separate fr om the exhaust lter case, but the Hepa lter will not sep[...]

12_ maintenance maintenance CHECK BRUSH DRUM AND DRIVE BEL T Y ou should check your vacuum cleaner’ s Brush Drum and Drive Belt regulaly for wear or damage. Y ou should also clean the brush ends of strings, hair , and carpet fibers. These can wrap around the brush and hamper its ability to ef fectively clean your carpet. Also remove and debris t[...]

03 MAINTENANCE maintenance _13 PICKER DRUM MAINTENANCE 1. Unplug cleaner from electrical outlet. 2. Place handle in low position and turn vacuum cleaner over so bottom side is up. 3. Remove the six screws as shown with a scr ewdriver . 4. Grasp Picker Drum at both ends and lift. 5. Clean strings, hair and other debris from Picker Drum, paying parti[...]

14_ maintenance MINI TURBO BRUSH (*select models only) T o Replace Brushr oll T o Replace Belt 1. Unplug cleaner from electrical outlet. 2. Slide the switch to the unlock position and remove bottom plate. 3. Inspect condition of brushroll. Replace brushr oll if brushes are worn down. T o remove brushroll, pull up and out of end slots in nozzle hous[...]

03 MAINTENANCE maintenance _15 1. Unplug the vacuum from electrical outlet. 2. If a clog is present or debris is visible, unscr ew the two screws on the back of the Petz T urbo Brush to remove the faceplate and clear any obstructions. 3. T o clean debris from the brushr oll, remove the brushr oll from the drive belt and clean debris. 4. Reposition [...]

Code No. DJ68-00503A REV(0.1) troubleshooting This V acuum cleaner is approved the following. Electromagnetic Compatibility Dir ective : 2004/108/EEC Low V oltage Directive : 2006/95/EC Check this list of possible problems and solutions befor e bringing your vacuum to a service center . PROBLEM POSSIBLE SOLUTION V acuum cleaner won’t run • Powe[...]