Samsung SRP275APG инструкция обслуживания

USER’S MANUAL SRP-275 IMPACT PRINTER All specific ations are subjecte d to change without notice www.samsungmin iprinters.co m[...]

[...]

SRP- 275 All ri ghts r eserv ed. No part of t hi s publi catio n ma y repr oduc ed, sto red i n a ret rieva l, or t ransm itte d in an y fo rm or by any means , elect ronic , mech anic al, ph otoco pying , rec ording , or o the rwise , with out t he prio r wr itte n pe rmis sion o f SAMS UNG ELE CTRO -MECH ANI CS. No pa tent l iabil ity is assumed [...]

Saf ety precautio ns ▌ In using th e pres ent appliance, please k eep th e following safety r egulations in or der to pr ev ent any haza r d or mat er ia l dam age . WA RN IN G Viol ating foll owing instructi ons ca n caus e serious i njur y or death . Do not bend t he cabl e by for ce or l eave it under a ny heavy obj ect. • A da maged cable c[...]

WA RN IN G Viol ating foll owing instructi ons ca n caus e serious i njur y or death . Do not use t he pri nter w hen it is out of order. This can caus e a fire or an electro cution. • Switch o ff and unplug the pr inter before cal ling your dealer. Do no t let water o r o ther fore ign o bjec ts in the printer. • If this happe ned, switc h off[...]

T able of contents Chapter 1 Setting up the pri nter 1.1 U npacki ng ················································································································· ··· 1-1 1.2 Choosi ng a place for the pri nter ··[...]

5.5 Reliab ility ····················································································· ································ 5-2 5.6 Envir onment c ondi tions ·······························?[...]

Introduction ▌ The SRP- 275 is a high- q uality imp act printer . ▌ This one-station printe r has the foll owi ng features. • Compact d esign and l ight-weight. • High-speed p rinting u sing lo gic-seeking ( 5.1LPS). • Easy to use : E asy pa per loading . • High rel iability and l ong l ife due to the use o f stepping m otors f or head [...]

[...]

[...]

CHAPT ER 1 Setting up th e printer 1-1 ▌ 1.1 Unp acking Y our pri nter box s hould inc lude the items shown i n the i llustrat ion belo w. If a ny items a r e damaged o r missing, p lease c ontact your dea ler . ▌ 1.2 Choos ing a plac e for the printer • Avoid locati ons th at are subj ect to di rect su nlig ht or exces sive heat. • Avoid u[...]

1-2 ▌ 1.3 Connect ing the cab les ▌ 1.3.1 Connecting the AC adaptor CAUTION Before connecti ng the printe r to the power supply, make sure that the voltage and powe r specifications match the printer’s requirements. Using an incorrect power supply can cause serious damage to th e printer. ▌ 1.3.2 Connecting the in terface cable an d drawer [...]

CHAPT ER 1 Setting up th e printer 1-3 ▌ 1.4 Inst alling the ribbon cassette NOTES Malf unctio ns an d ot her pr oblems may aris e if ot her th an s peci fied r ibbon casset tes are us ed in the print er . The Warranty m ay be void i f oth er t han spec ified ribb on c asse tt es are use d. Co nta ct your dealer or plac e of pu rchase for more i [...]

1-4 ▌ 1.5 Inst alling the p aper roll CAUTION Do not touch the au to cutter bla de when yo u open rea r cover. 1) To pr event data loss, make sure tha t the prin ter is not rece ivi ng d ata . 2) Open the rear cove r by pushin g the op en button . 3) Remo ve th e used paper rol l core i f the re is one. 4) Inser t th e pa per ro ll as show n. 5) [...]

CHAPT ER 1 Setting up th e printer 1-5 ▌ 1.6 Changing the p aper width Sc rew(3x 6)(2p iec es) Frame pap er control 57. 5mm 69.5mm 76mm( defaul t) 1) O pen the r ear cove r . 2) Re m ove the f ra me pape r cont rol by loosing t he two scr ews(3× 6). 3) Reatta ch the fram e paper co ntrol in you want. (Ins ert an d tigh ten two screw s(3×6) to r[...]

1-6 ▌ 1.7 Ins t alling the wall mount (Op tion) Bracket hange r Screw(3x5) ( 4piec es) Bracket mount Scre w(4 x10) (8piec es) 1) T urn t he Set over a nd at tach t he B racket hang er t o the F rame bas e then t ight en f our scre ws. 2) Attach t he Brack et mo unt to the wall firml y with the eigh t screw s. Be su re tha t t he Brac ket atta che[...]

CHAPT ER 1 Setting up th e printer 1-7 ▌ 1.8 Using the operation p anel Mos t of the func tions of th is prin ter ar e g overn ed by software , bu t you can moni tor th e p rinte r s status b y looking at t he lights on the c ontrol panel and for s ome proc edures you will us e the butt ons. • Control panel - POW ER LE D (Gr een C olor) Thi s i[...]

1-8 ▌ 1.9 Self test The sel f test le t you k now if your print er is ope rati ng prop erl y . It che cks the prin ting qu alit y , ROM versi on, DIP Switch setting s, m emor y sw itch se ttin gs an d sta tistic dat a. The test is indep endent o f any other eq uipment or softw are, so it is a go od idea to run it when you first set up th e prin t[...]

CHAPT ER 2 T roubleshoo ting 2-1 This chapt er gives s olutions to some printer pr oblems you ma y have. ▌ 2.1 E RROR LED blinki ng pattern The prin ter st ops all pr int er oper atio ns for t he sele cted pape r se ction , goes off li ne, and the ERR OR LED blinks wh en an error is detect ed. • Err ors t hat auto mati cally r e cover Error Des[...]

2-2 • Er rors t hat are i mpo ssi ble t o re cover Error Des cri pti on ERRO R LED bl inking p atte rn Recov ery R/ W erro r in memo ry or gate array Afte r R/ W che cking, th e print er does not work corre ctly . Writing to, reading out, or erasi ng the NV m emor y for image scanni ng resu lts does not work corr ect ly . Reco vers automa tica ll[...]

CHAPT ER 2 T roubleshoo ting 2-3 ▌ 2.3 The prin ter stop s printing • If the ER ROR LED is on ( but not b linki ng), t he prin ter is off line. Check to see t hat the cover s are cl osed and c heck the paper state . See "Ins talli ng paper rol l"( 1.5) in C hapt er 1 for i nstr uctio ns on i nstalli ng or replac ing th e p aper roll. [...]

2-4 ▌ 2.5 Printing i s poor Check the state of ribbon cassett e. If the r ibbon casset te life e nds, rep lace the ribb on cass ette a s descr i bed in Chap ter 1. NOTES If the pr inter is sti ll poo r , con tac t your dealer or a quali fie d servic e per son. ▌ 2.6 Y ou want to chec k a sof tware program • Hexadeci mal dump This featur e all[...]

CHAPT ER 3 Setting the s witches 3-1 ▌ 3.1 Setti ng t he DI P Swi tch Al though the fac t ory settin gs a re bes t for almost all use rs, i f yo u have spe cial require ments , you ca n cha nge the DIP S witch . Your pr inte r has two sets of DI P Swi tches. The fun cti ons of the switc hes ar e shown i n the foll owing t abl e. ▌ 3.1.1 DIP Swi[...]

3-2 ▌ 3.1.2 DIP Switch setting f or Citizen(iDP 3550) mode • DI P Sw itch 1 Swi tc h Function ON OFF Default 1-1 1-2 Emula tion Se lectio n (*1) Refe r to the fo llowing ta ble OFF 1-3 Aut o cutter Enab le Dis abl e OFF 1-4 CB M comm and CBM2 m ode (iDP 353 0 system) CBM1 m ode (iDP 3540 sy stem) OFF 1-5 1-6 1-7 Inte rnati ona l chara cters (*2[...]

CHAPT ER 3 Setting the s witches 3-3 ▌ 3.1. 3 DIP Sw itc h setti ng fo r Star (SP500) mo de • DI P Sw itch 1 Swi tc h Function ON OFF Default 1-1 1-2 Emula tion Se lectio n (*1) Refer to the follow ing t able OFF 1-3 Aut o cutter Ena ble Disabl e OFF 1-4 Bla ck/Re d Pri nting Enabl e Disabl e OFF 1-5 1-6 1-7 1-8 Rese rved OFF • DI P Sw itch 2[...]

3-4 ▌ 3.1.4 Changing the DIP Switch sett ing If you need to chan ge sett ings , foll ow the ste ps below t o make your change s. CAUTION Turn off the printer befo r e removing the DIP Switch cover to preven t an electric short, which can damage the printer. 1) Make sure the printer is tu rned off . 2) Remove th e screw fro m the DIP Sw itch co ve[...]

CHAPT ER 3 Setting the s witches 3-5 ▌ 3.2 Setting the Memo ry Switches ▌ 3.2.1 Me mory S wit ch s etting fo r Eps on(E SC/PO S) mode This print er has “Mem or y Switch” se t which is softwar e switc hes. Mem or y Switch set has “MSW 2”, “MSW 8”, “Custom ize valu e”, “Ser ial commu nicat ion conditi on”. “Mem or y Switch s[...]

3-6 • Memor y Swit ch 8 Swi tc h Function On Off 1 2 3 4 Reserv ed - F ixed to Off 5 Selec tio n of the cover ope n status Cov er open Paper end 6 R eserve d - Fixed t o Off 7 Rece ive buff er full releas e Rema ini ng 522 b ytes R emaini ng 640 b ytes 8 Pri nter (Cov er open du ring oper atio n) E rrors th at can poss ibly recove r Erro rs th at[...]

CHAPT ER 3 Setting the s witches 3-7 • Me mory Swi tc h Se tup Mod e The foll owin g items ar e spe cifi ed in the Mem or y Switch setup m ode: Basi c Ser ial comm unica tion cond ition (Ser ial co mmunica tion) - Transmis sion spee d - Parit y - Hand shak ing - Da ta le ngth Receive buffer full release conditio n (MSW 8-7) Pape r roll wi dth (Cu[...]

3-8 • Proc edur e of Memor y Swi tc h sett ing ① Reset ting Basic Ser i al Inter face ? B a ud r a te Current set tin g: 9600 b p s 19 20 0b p s 4 80 0 bps 2 40 0 bps Ha n d s h a ke Current s e tt i ng: DSR/ DTR XON /XOF F Pari ty Current set tin g: No n Ev en Odd Data b it Current s e tt i ng: 8 b its 7 b it s NO NO NO NO NO YES YES YES YES N[...]

CHAPT ER 3 Setting the s witches 3-9 ▌ 3.2.2 Me mory Sw it ch se tting for S ta r mode • Settings Memo ry Swi tches are fr om MSW 0 to MSW 8. They are st ored i n non-v olat ile memor y (fl ash mem or y). T o change the s ettin gs, send t he follo wing comm ands from the h ost. [Name ] Set Memor y Switch [Cod e] ASCI I ESC GS # m N n1 n2 n3 n4 [...]

3-10 • De fault S etting s The d efault sett ings for Memo ry Sw itch 0 to Me mory Switch 8 a re show n below . Setti ngs var y for sing le byt e chara cte r count ries (sta ndard s peci ficat ions (S BCS) ) and f or doubl e-b yte charact er co untri es (Chi nese charact er spe cifi catio ns (DBC S)). - Standard Spe cificat ion s (SBCS) Memo r y [...]

CHAPT ER 3 Setting the s witches 3-11 • Function - Memory Switch 0 Bit Functi on 0 1 F~C Rese rved B~A Red an d Blac k (inve rt ed black and whi te) C omma nds (* 3) Re fer to the fol l ow ing ta ble 9~5 R eserve d 4 Cou ntry Specific atio ns (* 1) SBC S (Sin gle By te countri es) DBCS (Double By te countries) 3~2 <FF> Comma nd (*2) Refe r [...]

3-12 - Memory Switch 1 Bit Functi on 0 1 F Rese rved E~5 4 Zero st yle Norm al Slas h zer o 3~0 Int ernati onal Cha racte rs ( *1 ) Refe r to the followin g table NOTES (*1) Internati onal Characters Defau lt Value Setti ngs MSW1-3 MSW1-2 MS W1-1 MSW1-0 Internation al Characters 0 0 0 0 U.S .A 0 0 0 1 Fran ce 0 0 1 0 Germany 0 0 1 1 U. K. 0 1 0 0 D[...]

CHAPT ER 3 Setting the s witches 3-13 - Memory Switch 3 Bit Functi on 0 1 F~D C~8 Characte r T ab l e (*2) Refe r to th e foll owing table 7~2 1~0 <CR > Com m and Fu nctio ns (*1) Ref er to t he f ollowi ng tab le NOTES (*1) <CR> Comma nd Functions MSW3-1 MSW3- 0 <CR> Functio ns 0 0 Igno red 0 1 Igno red 1 0 Pr ints and perf orms [...]

3-14 - Memory Switch 4 Bit Functi on 0 1 F~9 8 Aut om atic S tatus F uncti on Dis abled Ena bled 7~4 3 ESC RS a n comma nd funct ion On ly Setti ng Auto -sta tus sent on ly once 2~1 0 Data re ception erro r (seri al) Pr ints “?” Ignore d - Memory Switch 5 Bit Functi on 0 1 F~0 R eserved - Memory Switch 6 Bit Functi on 0 1 F~A 9 BUSY C ondition [...]

CHAPT ER 4 Contr o l comma nds li st 4-1 ▌ 4.1 Com mand not ati on XXXX [Name ] T he nam e of the c omma nd. [Fo rmat ] The code sequence . [Range ] Gi ves the a ll owabl e ranges for th e argum ents. [Des cription ] Descr ibes th e command’ s function. [Not es] Prov ides i mport ant info rmati on on s etti ng and usi ng the print er com man d,[...]

4-2 ▌ 4.3 Exception processing • Undefine d codes Thi s ter m refers t o the co des rang ing fro m 00H to 1 FH in the ch arac ter code ta ble. I f a code in this r ange that is not d efi ned a s a com mand i s inp ut, t hat c ode (one b yte) is re ad i n and d iscar ded, and subs equen t data is pr ocess ed as norm a l data. Exampl e : 30H, 31 [...]

CHAPT ER 4 Contr o l comma nds li st 4-3 ▌ 4.4 Commands f or SRP-27 5 series ▌ 4.4.1 Commands list for EPS ON mode ( TM-U220) No. Co mmand Desc riptio n Hex 1 HT Horizontal tab 09 2 L F Print a nd line fee d 0A 3 CR Pr int and carr iage ret urn 0D 4 DLE EO T Real-t ime stat us transm ission 10 04 5 DLE ENQ Real-tim e request to printer 10 05 6 [...]

4-4 ▌ 4.4.2 Command description for EPSON mod e (TM -U220) HT [Name] Horizont al tab [Format] ASCII HT H e x 0 9 D e c i m a l 9 [Range] No ne [Defau lt] None [Desc ription] Mo ves the pri nting pos itio n to the ne xt hori zonta l tab. LF [Name] Print and line feed [Format] ASCII LF H e x 0 A D e c i m a l 1 0 [Range] No ne [Defau lt] None [Desc[...]

CHAPT ER 4 Contr o l comma nds li st 4-5 DLE EOT [Name] Real-t ime status transmission [F ormat] ASCII D LE EOT n Hex 10 04 n Decimal 16 4 n [Range] 1 ≤ n ≤ 4 [Descri ption ] T ransmi ts 1 byt e of status dat a specif ied in real time, u sing n as fo llows: n Functio n 1 T ran smit prin ter st atu s 2 T ransmit offline s tatus 3 T ransmit error[...]

4-6 DLE ENQ [Name] Real-time reques t to printer [F ormat] ASCII D LE ENQ n Hex 10 05 n Decimal 16 5 n [Range] n = 2 [Defau lt] None [Description] Recovers from a n error after clearing the receive and pr in t buffers. DLE DC4 ( fn = 1) [Name] Gen erate pulse at real-time [Format] ASCII DLE DC4 n m t Hex 10 14 n m t Decimal 16 20 n m t [Range] n = [...]

CHAPT ER 4 Contr o l comma nds li st 4-7 ESC % [Name] Select/cancel user-defined character set [Format] ASCII ESC % n Hex 1B 25 n Decimal 27 37 n [Range] 0 ≤ n ≤ 255 [Defau lt] n = 0 [Descri ption ] Sel ects or can cels t he use r-define d charact er set. - When the LSB of n is 0, the user-defined character set is c a nceled. - When the LSB of [...]

4-8 ESC * [Name] Select bit-im age mode [Format] ASCII ESC * m n L n H d1 ... dk Hex 1B 2A m n L n H d1 ... dk Decimal 27 42 m n L n H d1 ... dk [Range] m = 0 , 1 0 ≤ n L ≤ 25 5 0 ≤ n H ≤ 3 0 ≤ d ≤ 255 k = n L + n H x 255 [Defau lt] None [Descripti on] Selects a bit-im age mode usin g m for the numbe r of dots speci fied by ( n L + n H [...]

CHAPT ER 4 Contr o l comma nds li st 4-9 ESC 2 [Name] Select default line spa cing [Format] ASCII ESC 2 Hex 1B 32 Decimal 27 50 [Range] No ne [Defau lt] None [De scrip tion] Sets the line sp acing to the “de fault line spa cing. ” ESC 3 [Name] Set line spacing [Format] ASCII ESC 3 n Hex 1B 33 n Decimal 27 51 n [Range] 0 ≤ n ≤ 255 [Default] [...]

4-10 ESC @ [Nam e] I n iti aliz e prin te r [Format] ASCII ESC @ Hex 1B 40 Decimal 27 64 [Range] No ne [Defau lt] None [Description] The data in the p rint buffer is c leared, and the p rinter mode(s) i s reset to the mod e that was i n effect when the po wer was turned on. - Any macro definit ions are n ot clea red. - Conte nts of us er NV mem ory[...]

CHAPT ER 4 Contr o l comma nds li st 4-11 ESC J [Name] Pri nt and fe ed paper [Format] ASCII ESC J n Hex 1B 4A n Decimal 27 74 n [Range] 0 ≤ n ≤ 255 [Defau lt] None [Descri ption ] Print s the data in the print buff er and feed s the paper n x (ver tical or horizo ntal moti on un it). ESC K [Name] Print and reverse feed [Format] ASCII ESC K n H[...]

4-12 ESC U [Name] T urn unidirectional printing mode on/off [Format] ASCII ESC U n Hex 1B 55 n Decimal 27 85 n [Range] 0 ≤ n ≤ 255 [Defau lt] n = 0 [Descr iption] T urns unidire ctional pr inting mode on or o ff . - When the LSB of n is 0, unidi rectional pri nting mode is t urned off . - When the LSB of n is 1, unidi rectional pri nting mode i[...]

CHAPT ER 4 Contr o l comma nds li st 4-13 ESC c 4 [Name] Select paper sen sor( s) to sto p printin g [Format] ASCII ESC c 4 n Hex 1B 63 34 n Decimal 27 99 52 n [Range] 0 ≤ n ≤ 255 [Defau lt] n = 0 [Descri ption ] Sele cts whet her to st op print ing or not when the pa per runs out using n as follo ws: Bit Off/ On He x Decimal Fu nctio n Off 00 [...]

4-14 ESC g [Name] Start macro record [Format] ASCII ESC g 0 <k > [ <n H > <n L > ] k [d1…d m] k Hex 1B 67 00 <k> [ <n H > <n L > ] k [d1…dm ] k Decimal 27 103 0 <k > [ <n H > <n L > ] k [d1… dm] k [Range] k ≤ 10 0 ≤ n L ≤ 255 0 ≤ n H ≤ 255 [(256 × n H ) + n L ] 1 + … ..+ [(256[...]

CHAPT ER 4 Contr o l comma nds li st 4-15 ESC p [Name] Generate pulse [Format] ASCII ESC p m t1 t2 Hex 1B 70 m t1 t2 Decimal 27 112 m t1 t2 [Range] m = 0, 1, 48, 49 1 ≤ t1 ≤ 255 1 ≤ t2 ≤ 255 [Defau lt] None [De scrip tion] Outputs the p ulse spe cifie d by t1 and t2 to the specifi ed con necto r pin m as follow s: m Connec tor Pi n 0 Drawer[...]

4-16 ESC u [Name] T ran smit peripheral device status [Format] ASCII ESC u n Hex 1B 75 n Decimal 27 117 n [Range] n = 0, 48 [Descri ption ] T ransmit s the periphe ral device st atus of 1 byt e. [Notes] • Th e peripheral devi ce statu s to be transmitt ed is as fol lows: Bit Binary Hex De c im al Status 0 Drawer kick-out conn ecto r pin 3 is LOW [...]

CHAPT ER 4 Contr o l comma nds li st 4-17 FS p [Na me] Prin t NV b it i mag e [Format] ASCII FS p n m Hex 1C 70 n m Decimal 28 112 n m [Range] 1 ≤ n ≤ 255 m = 0, 1, 48, 49 [Description] Prints a NV bit image n usin g the m ode specified by m . m Mo de Sca ling fo r horiz ontal Sca lin g f o r ver tical 0, 48 Nor mal x 1 x 1 1, 49 Double-width x[...]

4-18 GS ( C [Name] E dit NV user memory [Format] ASCII GS ( C p L p H m fn b [c1, c2] [d1...dk] Hex 1D 28 43 p L p H m f n b [ c 1 , c 2 ] [ d 1 . . . d k ] Decimal 29 40 67 p L p H m f n b [ c 1 , c 2 ] [ d 1 . . . d k ] [De scrip tion] Del etes, store s, and tra nsmits data in th e NV us er memo ry a rea b as ed on the functio ns defined in the t[...]

CHAPT ER 4 Contr o l comma nds li st 4-19 GS ( C p L p H m fn b c1 c2 <F unction 2 > [Format] ASCII GS ( C p L p H m fn b c1 c 2 Hex 1D 28 43 05 00 00 f n 00 c1 c2 Decimal 29 40 67 5 0 0 f n 0 c1 c2 [Range] ( p L + p H x 256) = 5 ( p L = 5, p H = 0) m = 0 fn = 2, 50 b = 0 32 ≤ c1 ≤ 126 32 ≤ c2 ≤ 126 [Descri ption ] T ransmit s the dat[...]

4-20 GS ( C p L p H m fn b d1 d2 d3 <Functio n 6> [Format] ASCII GS ( C p L p H m fn b d1 d2 d3 Hex 1D 28 43 06 00 00 fn 00 43 4C 52 Decimal 29 40 67 6 0 0 f n 0 6 7 7 6 8 2 [Range] ( p L + p H x 256) = 6 ( p L = 6, p H = 0) m = 0 fn = 6, 54 b = 0 d1 = 67 d2 = 76 d3 = 82 [Descri ption ] The printe r delete s all recor ds stor ed in the NV u s[...]

CHAPT ER 4 Contr o l comma nds li st 4-21 GS ( E p L p H fn d1 d 2 <Functi on 1> [Format] ASCII GS ( E p L p H fn d1 d2 Hex 1D 28 45 03 00 01 49 4E Decimal 29 40 69 3 0 1 73 78 [Range] ( p L + p H x 256) = 3 ( p L = 3, p H = 0) fn = 1 d1 = 73 d2 = 78 [Descri ption ] Thi s comman d changes th e printe r into the user sett ing mode. GS ( E p L [...]

4-22 GS ( E p L p H fn a <F unc tion 4 > [Format] ASCII GS ( E p L p H f n a Hex 1D 28 45 02 00 04 a Decimal 29 40 69 2 0 4 a [Range] ( p L + p H x 256) = 2 ( p L = 2, p H = 0) fn = 4 a = 2, 8 [Descri ption ] The printe r transm its th e host the value f or th e Mem ory Swit ch spe cified by pa rameter a . GS ( E p L p H fn [a1 n1 L n1 H ]...[...]

CHAPT ER 4 Contr o l comma nds li st 4-23 GS ( E p L p H fn a d1. ..dk <F unctio n 11 > [Format] ASCII GS ( E p L p H fn a d1...dk Hex 1D 28 45 p L p H 0B a d1 ...dk Decimal 29 40 69 p L p H 11 a d1...dk [Range] 3 ≤ ( p L + p H x 256) ≤ 8 (3 ≤ p L ≤ 8, 0 ≤ p H ≤ 25 5) fn = 11 1 ≤ a ≤ 4 48 ≤ d ≤ 57 [ a = 1] 48 ≤ d ≤ 50 [...]

4-24 GS I [Name] T ransmit printer I D [Format] ASCII GS I n Hex 1D 49 n Decimal 29 73 n [Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51, 65 ≤ n ≤ 68, n = 33 [Defau lt] None [Description] T ransmits 1 byte of pr inter ID w hich is spec ified by n a s fol low s: n Pr i n te r I D Spec ificati on 1, 49 Printer model ID P rinter model 2, 50 T ype ID Prin t[...]

CHAPT ER 4 Contr o l comma nds li st 4-25 GS a [Name] E nable/disa ble Automat ic Status Back (ASB) [Format] ASCII GS a n Hex 1D 61 n Decimal 29 97 n [Range] 0 ≤ n ≤ 255 [Defau lt] Wh en DI P Switch or M emory Swi tch (BUSY co ndit ion) i s Off: n = 0 When DIP Switch or Me mory Swi tch (BUSY co ndit ion ) is On : n = 2 [Descri ption ] E nables [...]

4-26 [Note s] • Basic ASB sta tus is 4 -byte con figu ration [fir st byte - four th byte ]. • The statu s to be transmitted are as follows: • First byte (printer in formation) Bit On/Off Hex De ci ma l F unction 0 Off 00 0 Not used. Fixed to Off. 1 Off 00 0 Not used. Fixed to Off. Off 00 0 Drawer kic k- out connector pin 3 is LOW . 2 On 04 4 [...]

CHAPT ER 4 Contr o l comma nds li st 4-27 GS r [Name] T ransmit status [Format] ASCII G S r n Hex 1D 72 n Decimal 29 114 n [Range] n = 1, 2, 49, 50 [Descri ption ] T ransmi ts 1 byt e of statu s data usin g n as foll ows : n Functi on 1, 49 T ransm its pape r sensor statu s 2, 50 T ransm its drawer k ick-out conn ecto r statu s [Notes] • Ea ch st[...]

4-28 ▌ 4.4.3 Commands list for STAR mode ( SP500) n Command Desc riptio n Hex 1 ESC GS t S pecif y code page 1B 1D 74 2 ESC R Specify int ernat ional chara cter se t 1B 52 3 ESC / Specify/canc el slas h zero 1B 2F 4 ESC M Specify 7× 9 font (h alf dots) 1B 4D 5 ES C P Specif y 9× 9 fo nt 1B 50 6 ESC : Specify 5×9 fo nt (3 P-1) 1B 3A 7 ESC SP Sp[...]

CHAPT ER 4 Contr o l comma nds li st 4-29 n Command Descri pti on Hex 51 ESC L Double density b it i mage 1B 4C 52 ESC d Pape r cut i nstr uctio n 1B 64 53 ESC BE L Set pul se wi dth for exte rnal devic e drive 1B 07 54 BEL Exter nal de vice 1 dr ive inst ruct ion 07 55 FS Externa l devic e 1 driv e inst ructi on (re al tim e) 1C 56 SUB Ext ernal d[...]

4-30 ▌ 4.4.4 Commands list for CITIZEN mode (iDP3 550/3551) n Command Desc r ipt ion Hexa decim al 1 FF n n -line paper fe ed (C BM1 m od e) 0C n 2 FF Form fee d (CBM 2 mode ) 0C 3 SO ( Note) Spe cify i ng th e doub le width cha racter (CBM1 mode) 0E 4 SI (N ote) C anc elin g the dou ble wi dth char acte r 0F 5 LF Pr int an d paper feed 0A 6 CR P[...]

CHAPT ER 5 R eference inf or mati on 5-1 ▌ 5.1 Printing specificatio n Item Descr ipt ion Re mark Pri nting m e thod Ser ial imp act meth od Head wire 9 pin seri al t ype Dot pitc h 0.352mm (1 /72” ) Dot wire diamet er 0.3mm (0.01 ”) Pri nting direc tion B idirec tion al (l ogic see king) w ith fric tion feed Cha racters per line Max. 42 (cha[...]

5-2 ▌ 5.4 Electrical characteristics Item Desc r ipt ion Rema r k Supp ly v olta ge 24V DC ± 10% Operat ing Me an : Appr oxim at ely 0. 5A Pea k : Approx imately 1.5A Curr ent cons um ption (at 24V , exce pt fo r dra wer kic k-ou t driv ing) S tandb y Mean : Appr oxim ate ly 0.3A NOTES Maximu m 1A fo r drawe r kick -out d riving. ▌ 5.5 Re li a[...]

CHAPT ER 5 R eference inf or mati on 5-3 ▌ 5.7 Dimensions & weight • Dimensions • Weight Ap prox. W t . : 2. 5 kg Shipping Wt. : 4.0 kg ▌ 5.8 Option al features The opt ional feat ures ei ther repl ace a stan dard featur e or enh ance th e ope rati on of t he print er . All opt ional feat ures are installe d at the facto ry and m ust be[...]

[...]

APPENDIX A C o d e t a b l e s A-1 The follo wing pages show the char acter code ta bles. To fine the chara cter cor respon ding to a hexa deci mal nu mber, co unt ac ross the top o f th e ta ble fo r th e l eft digit an d cou nt down t he lef t colum n of the ta ble rig ht digit . For e xampl e, 4A =J. ▌ A .1 Page 0 (PC 437 : USA , Standard Euro[...]

APPENDIX A Code ta bles A-2 ▌ A .2 Page 1 (Katakan a)[...]

A-3 ▌ A .3 Page 2 (PC850 : Multilingual)[...]

APPENDIX A Code ta bles A-4 ▌ A .4 Page 3 (PC860 : Po rtugues e)[...]

A-5 ▌ A .5 Page 4 (PC863 : C anadian- French)[...]

APPENDIX A Code ta bles A-6 ▌ A .6 Page 5 (PC865 : N ordic)[...]

A-7 ▌ A .7 Page 16 (WPC1252 : Latin1)[...]

APPENDIX A Code ta bles A-8 ▌ A .8 Page 17 (PC8 66 : Russian)[...]

A-9 ▌ A .9 Page 18 (PC8 52 : Latin2)[...]

APPENDIX A Code ta bles A-10 ▌ A .10 Page 19 (PC858 : Euro)[...]

A- 11 ▌ A .1 1 Page 21 (PC862 : Israe l)[...]

APPENDIX A Code ta bles A-12 ▌ A .12 Page 22 (PC 864 : Ar abic)[...]

A-13 ▌ A .13 Page 23 (Th ai characte r code 42)[...]

APPENDIX A Code ta bles A-14 ▌ A .14 Page 24 (W PC1253 : Gree k)[...]

A-15 ▌ A .15 Page 25 (W PC1254 : T urkish)[...]

APPENDIX A Code ta bles A-16 ▌ A .16 Page 26 (W PC1257 : B altic)[...]

A-17 ▌ A .17 Page 27 (Farsi)[...]

APPENDIX A Code ta bles A-18 ▌ A .18 Page 28 (W PC1251 : Ru ssian)[...]

A-19 ▌ A .19 Page 29 (PC737 : Greek)[...]

APPENDIX A Code ta bles A-20 ▌ A .20 Page 30 (PC 775 : Baltic)[...]

A-21 ▌ A .21 Page 31 (Th ai charact er code 16)[...]

APPENDIX A Code ta bles A-22 ▌ A .22 Page 32 (OldCo de : Israel)[...]

A-23 ▌ A .23 Page 33 (W PC1255 : Isra el)[...]

APPENDIX A Code ta bles A-24 ▌ A .24 Page 34 (Th ai charact er code 1 1)[...]

A-25 ▌ A .25 Page 35 (Th ai charact er code 18)[...]

APPENDIX A Code ta bles A-26 ▌ A .26 In tern ational char acter code t able[...]

APPENDIX B Connectors B-1 ▌ B.1 RS-232C S erial I/F RS-232 Interfa ce connec tor Dr a wer kic k -o u t Connecto r ▌ B.1.1 RS-232C Serial I/F cable connection (F.G ) 1 (TXD) 2 (RXD) 3 (RTS) 4 (CTS) 5 (DSR) 6 (S.G) 7 (DTR) 20 1 (F.G ) 2 (RX D) 3 (TXD) 4 (DTR) 5 (S.G ) 6 (DSR) 7 (RTS) 8 (CTS) PRI NT ER SID E (25Pin) HOS T SIDE (9Pin ) ▌ B.1.2 RS[...]

APPENDIX B Connectors B-2 ▌ B.2 I EEE1284 P arallel I/F PARALLEL Interfa ce connec tor Dr a wer kic k -o u t Connecto r ▌ B.2.1 IEEE 12 84 P ara llel I/F sign al sp ecif icatio ns (Co mpatib ilit y / Ni bble / Byte mode) Pin no. Sourc e Compati bilit y mode Nibble mode B y te mode 1 Ho st nS trobe HostCl k Hos tCl k 2 Host / Prin ter Data 0 (LS[...]

B-3 ▌ B.3 USB I /F USB Interfa ce connec tor Dr a wer kic k -o u t Connecto r ▌ B.3.1 USB I/F signal descriptions Pin No. Signal na me Assign ment (Color) Func tion She ll Shiel d Drain wi re F rame gr ound 1 VBUS R ed NC 2 D- W hite Diff erent ial da ta line 3 D+ Green Dif feren tial data line 4 GND B lack Sign al grou nd ▌ B.4 Drawe r kick-[...]

KN02-00009E Rev. 1.1[...]