Samsung SNO-5080R инструкция обслуживания

NETWORK CAMERA User Manual SNO-5080R[...]

Copyright ©2011 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall[...]

English _3 ● OVERVIEW IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. Do not install near any heat sources[...]

overview 4_ overview WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be plac[...]

English _5 ● OVERVIEW Class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected. And please call a repair man in your location. When used outside of the U.S., it may be used HAR code[...]

overview 6_ overview Please read the following recommend safety precautions carefully. Do not place this apparatus on an uneven surface. Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. Do not place this apparatus near conductive material. Do not attempt to service this apparatus yoursel[...]

English _7 ● OVERVIEW CONTENTS OVERVIEW 3 3 Important Safety Instructions 9 Product Features 9 Recomended PC Specifications 10 What’s Included 11 At a Glance INSTALLATION & CONNECTION 13 13 To adjust the zoom factor or focus 14 Connecting with other Device NETWORK CONNECTION AND SETUP 16 16 Connecting the Camera Directly to Local Area Netwo[...]

overview 8_ overview SETUP SCREEN 34 34 Setup 34 Video Setup 42 Network Setup 48 Event Setup 55 System Setup APPENDIX 60 60 Specification 64 Product Overview 66 Troubleshooting 68 Open Source Announcement 70 GPL/LGPL Software License WEB VIEWER 28 28 Connecting to the Camera 29 Login 30 Installing Silverlight Runtime 32 Using the Live Screen[...]

English _9 ● OVERVIEW PRODUCT FEATURES HD Video Quality Multi-Streaming This network camera can display videos in different resolutions and qualities simultaneously using different CODECs. M However, MPEG-4 video can not be played on a web page. Use CMS software if you want to play the video on a web page.  Web Browser-based Monitoring Using t[...]

overview 10_ overview WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description User Manual, Installer S/W DVD, CMS S/W DVD 2 Quick Guide 1 Template 1 Product installation guide Tapping Screw 3 Used for installation on the wall or ceiling L Wrench 1 Used to adjus[...]

English _11 ● OVERVIEW AT A GLANCE Front Side Item Description  Sunshield It protects the camera from the direct sunlight. b Sunshield Hold It fixes the sunshield with the camera. c Video Output Port Connected to the monitor so that you can check the video from the camera.  Reset Button Resets the camera settings to the default. Press and h[...]

overview 12_ overview Rear Side Item Description  Power Port Used to plug the power cable. b Network Port Used to connect a PoE or LAN cable. c I/O Port ARM-OUT WHITE : Used to connect the alarm output signal. ARM-IN BLUE : Used to connect the alarm input signal. A-COM GRAY : Common port where the alarm output signal is connected. GND YELLOW : U[...]

English _13 ● INSTALLATION & CONNECTION TO ADJUST THE ZOOM FACTOR OR FOCUS Loosen the front cover as shown. Loosen the zoom/focus lever slightly. Position the zoom/focus lever to WIDE (NEAR) or TELE (FAR) as appropriate. Then, tighten the zoom/focus lever to fix the adjusted position. Turn the front cover to tighten it. To ensure seamless wat[...]

installation & connection 14_ installation & connection CONNECTING WITH OTHER DEVICE Connecting to the monitor Use the test monitor cable to connect the video output port of the camera with the video input port of the monitor. In the initial installation of the camera, you can connect the camera to the monitor for checking the connection st[...]

English _15 ● INSTALLATION & CONNECTION Ethernet Connection Connect the Ethernet cable to the local network or to the Internet. Power Supply Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. Be careful not to reverse the polarity when you connect the power cable. You can also u[...]

16_ network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN Launch an Internet browser on the local PC. Enter the IP address of the camera in the address bar of the browser. A remote PC in an[...]

English _17 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM Use the cross LAN cable to connect the network cable directly to your PC. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. Use the Internet browser to[...]

18_ network connection and setup network connection and setup CONNECTING THE CAMERA DIRECTLY TO A PPPoE MODEM Use the cross LAN cable to connect the network cable directly to your PC. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet. Use the Internet browser [...]

English _19 ● NETWORK CONNECTION AND SETUP CONNECTING THE CAMERA TO A BROADBAND ROUTER WITH THE PPPoE/CABLE MODEM This is for a small network environment such as homes, SOHO and ordinary shops. Configuring the network settings of the local PC connected to a Broadband Router Configuring the network settings of the local PC connected to a Broadband[...]

20_ network connection and setup network connection and setup BUTTONS USED IN IP INSTALLER Item Description  Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Mode Displays either < Static > or < Dynamic > for the current ne[...]

English _21 ● NETWORK CONNECTION AND SETUP Item Description  URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed.  IPv4 Scans for cameras with the IPv4 setting.  IPv6 Scans for cameras with the IPv6 setting.  Search [...]

22_ network connection and setup network connection and setup In the < Address > pane, provide the necessary information. MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually. You can configure the static IP settings only if the DHCP checkbox is unch[...]

English _23 ● NETWORK CONNECTION AND SETUP Click [ OK ]. Manual network setup will be completed. When the manual setup including IP is completed, the camera will restart. If the Broadband Router has more than one camera connected Configure the IP related settings and the Port related settings distinctly with each other. Category Camera #1 Camera [...]

24_ network connection and setup network connection and setup Enter the password. This is the login password for the “ admin ” user who accesses the camera. The default password is “ 4321 ”. Click [ OK ]. Auto network setup will be completed. DYNAMIC IP SETUP Dynamic IP Environment Setup Example of the Dynamic IP environment If a Broadband [...]

English _25 ● NETWORK CONNECTION AND SETUP PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. Manual Port Range Forwarding From the Setup menu of the Broadband Router, select < A[...]

26_ network connection and setup network connection and setup Setting up Port Range Forward for several network cameras When several network cameras are connected to one Broadband Router device, you should forward the TCP 943 port of the router to the TCP 943 port of a connected camera. If you don't set properly the TCP 943 port of the router,[...]

English _27 ● NETWORK CONNECTION AND SETUP CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC Run the IP Installer. It will scan for connected cameras and display them as a list. Double-click a camera to access. The Internet browser starts and connects to the camera. Access to the camera can also be gained by typing the camera's IP address in t[...]

28_ web viewer web viewer CONNECTING TO THE CAMERA Normally, you would Launch the Internet browser. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. • IP address (IPv6) : 2001:230:abcd: ffff:0000:0000:ffff:1111  http://[2001:230:abcd:ffff:[...]

English _29 ● WEB VIEWER To check the DDNS address If the camera is connected directly to the DHCP cable modem, DSL modem, or PPPoE modem, the IP address of your network will be changed each time you try to connect to the ISP (Internet Service Provider) server. If this is the case, you will not be informed of the IP address changed by DDNS. Once [...]

30_ web viewer web viewer This network camera uses Microsoft Silverlight for displaying the video. INSTALLING SILVERLIGHT RUNTIME If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. Click < C[...]

English _31 ● WEB VIEWER When done, click < Close >. Close and restart the web browser, and try to access the Web Viewer. When Silverlight Runtime is properly installed, you will see the Live screen. For normal installation, set the Block Popup setting as follows: ex) Internet Explorer l Tools l Block Popup l Always allow popups from the cu[...]

32_ web viewer web viewer USING THE LIVE SCREEN Item Description  Monitoring Move to the monitoring screen. b Setup Move to the Setup screen. c Viewer Screen Displays the Live video on the screen.  Alarm Output Activate the Alarm Out port.  Hide the alarm indicator Hides the alarm indicator near the border of the viewer screen.  Digital[...]

English _33 ● WEB VIEWER Item Description  Capture Saves the snapshot as an image file in the .bmp format.  Video Format You can select a profile type in < Video profile > under the < Video > setup menu. If the “Invalid codec” message is displayed, select a profile type from the profile list again. M If the temperature drops[...]

setup screen 34_ setup screen SETUP You can configure the video, network, event and system settings of the camera via the network. In the Live screen, click [ Setup ( ) ]. The Setup screen appears. VIDEO SETUP Video profile From the Setup menu, select the < Video ( ) > tab. Click < Video profile >. Select a < Video profile > numbe[...]

English _35 ● SETUP SCREEN To add a video profile You can add as many codecs as necessary so that a variety of profiles can be applied according to the recording condition. Select a profile number. Provide the name and select a codec. Specify the conditions under which the codec will be applied. Specify the details of the selected codec including[...]

setup screen 36_ setup screen Video setup From the Setup menu, select the < Video ( ) > tab. Click < Video setup >. Select a < Video source > mode. Flip mode : Turn upside down the image that is captured by the camera. Mirror mode : Flip horizontal the image that is captured by the camera. Set the < Privacy area configuration &[...]

English _37 ● SETUP SCREEN Camera setup You can change the camera settings according to the environment where the camera is located. From the Setup menu, select the < Video ( ) > tab. Click < Camera setup >. Configure the settings as necessary of : SSDR, White balance, Backlight, Exposure, Special, OSD, IR Mode When done, click [ Appl[...]

setup screen 38_ setup screen Manual : You can adjust the red and blue gains of the camera video manually. AWC : Corrects the colors of the camera video to be optimized to the current lighting condition and screen mode. You may need readjustment if the lighting condition is changed. Outdoor : Automatically corrects the video colors of the camera to[...]

English _39 ● SETUP SCREEN At night operation, this function will be activated only if the incoming highlight exceeds a certain area in a low contrast environment. At night, HLC will not function if the scene is either too bright or too dark. The backlight function is not available while in IR mode. Exposure Setup You can adjust the exposure leve[...]

setup screen 40_ setup screen Special Setup Select < Special >. Select each item and set it properly. Day & night : You can switch the mode to adjust the black and white level as well as the colors. Color : Always displays the video in colors. B/W : Always displays the video in black and white. Auto : Displays in color mode during normal [...]

English _41 ● SETUP SCREEN OSD Setup Select < OSD >. Select each item and set it properly. Camera title : Use alphanumeric characters in the list and enter a desired title in the bottom input line. You can enter up to 15 characters for the title. Camera title position x, y : Specify the coordinates where the camera title is displayed. IR Mo[...]

setup screen 42_ setup screen NETWORK SETUP Interface From the Setup menu, select the < Network ( ) > tab. Click < Interface >. Set the < Interface > and < IPv6 setup > as necessary. IP type : Select an IP connection type. Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2. DHCP : Specify the DNS1 and DNS2[...]

English _43 ● SETUP SCREEN Port From the Setup menu, select the < Network ( ) > tab. Click < Port >. Type in each item in the Port menu as necessary. Neither the port range between 0 and 1023 nor port 3702 is available. HTTP port : HTTP port used to access the camera via the web browser. The default is 80(TCP). VNP port : Set a port u[...]

setup screen 44_ setup screen DDNS DDNS is an abbreviation of Dynamic Domain Name Service that converts the IP address of a camera into a general Host Name so that the user can easily remember it. From the Setup menu, select the < Network ( ) > tab. Click < DDNS >. Select < DDNS >. Type in the DDNS items according to the selected [...]

English _45 ● SETUP SCREEN From the top menu bar, select < DDNS SERVICE > - < MY DDNS >. Click [ PRODUCT REGISTRATION ]. Enter the product domain. You must perform the duplicate check for the domain that you entered. Select a < CLASSIFICATION > and specify the < MODEL NUMBER >. Specify the product location with a descripti[...]

setup screen 46_ setup screen Configuring public DDNS in Camera Settings Open the DDNS settings page and select < Public DDNS > for < DDNS >. Enter the corresponding site’s host name, user name and password. Click [ Apply ( ) ] button. If the connection properly establishes, < (Success) > appears. When done, click [ Apply ( ) ].[...]

English _47 ● SETUP SCREEN SSL You can select a secure connection system or install the public certificate for this purpose. From the Setup menu, select the < Network ( ) > tab. Click < SSL >. Select a secure connection system. To access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “http[...]

setup screen 48_ setup screen EVENT SETUP FTP / E-mail You can configure the FTP/E-mail server settings so that you can transfer the images stored in the camera to your PC if an event occurs. From the Setup menu, select the < Event ( ) > tab. Click < FTP / E-mail >. Select < FTP configuration > or < E-mail configuration > an[...]

English _49 ● SETUP SCREEN Sender : Enter the address of the email sender. If the sender address is incorrect, the email from the sender may be classified as SPAM by the email server and thus may not be sent. Subject : Enter a subject for your email. Body : Provide the text for the massage. Attach the alarm images to the email that you are prepar[...]

setup screen 50_ setup screen Video analysis From the Setup menu, select the < Event ( ) > tab. Click < Video analysis >. To set the Motion Detection Select a motion detection mode. Specify the use of motion detection. Select a sensitivity level of the motion detection. Place the cursor at a point in the video and drag it to whatever yo[...]

English _51 ● SETUP SCREEN To set the Intelligent Video Analysis Select an Intelligent Video Analysis mode. Set whether to use the Intelligent Video Analysis function. Specify the event rules. You can set a total of 3 rules including the virtual line and the specified area. Set whether you want to use the overlay or not. If you set it to < Ena[...]

setup screen 52_ setup screen Two or more objects overlap or one object divides in multiple portions. Too fast object (for a proper detection, one object should be found overlapping between contiguous frames). Reflection / blur / shadow due to a strong light such as direct sunlight, illumination, or headlamp. In severe snow, rain, wind or in dawn /[...]

English _53 ● SETUP SCREEN Select a desired < Defined Area Based Rules >. You can specify up to 3 defined area event rules. Entering : An event where a moving object passes through the defined area and enters inside will be detected. Exiting : An event where a moving object passes through the defined area and exits outside will be detected.[...]

setup screen 54_ setup screen Time schedule You can configure so that an event will occur at a scheduled time regardless of the actual occurrence of the event. From the Setup menu, select the < Event ( ) > tab. Click < Time schedule >. To set the timer event Set < Timer event setup > to < Enable >. Specify the < Activatio[...]

English _55 ● SETUP SCREEN SYSTEM SETUP Product information From the Setup menu, select the < System ( ) > tab. Click < Product information >. Check the camera information, or provide details according to your network environment. Device name : Provide a device name that will be displayed on the Live screen. Location : Specify the loc[...]

setup screen 56_ setup screen System time setup : Specify the time and date that will be applied to your system. Manual : Specify the time manually. Synchronize with NTP server : Sync with the time of the specified server address. Synchronize with PC viewer : Synchronize the time with the connected PC. When done, click [ Apply ( ) ]. If you select [...]

English _57 ● SETUP SCREEN Upgrade / Reboot From the Setup menu, select the < System ( ) > tab. Click < Upgrade / Reboot >. Select a desired item and set it appropriately. Upgrade : Performs upgrading the system. Factory default : Resets the system to the factory default. Except network parameter : Reset the other settings except for [...]

setup screen 58_ setup screen To save the current settings and restore the backup settings Click [ Backup ]. The Save As dialog should appear. Specify the backup path with a proper file name, and click [ Save ]. The backup file will be saved to the specified path in the format of “ .bin ”. To restore the backup settings, click [ Restore ]. Sele[...]

English _59 ● SETUP SCREEN Log You can check the system log or event log. From the Setup menu, select the < System ( ) > tab. Click < Log >. Select a log type. Syslog : You can check the system logs where any system changes are recorded including the time information. Evtlog : You can check the event logs including the time informatio[...]

appendix 60_ appendix appendix SPECIFICATION Items Description Video Imaging Device 1/3" 1.3M PS CMOS Total Pixels 1,384(H) x 1,076(V) Effective Pixels 1,329(H) x 1,049(V) Scanning System Progressive Min. Illumination Color : 0.3 Lux (F1.2, 50IRE), 0.005 Lux (Sens up 60X) B/W : 0 Lux (F1.2, 50IRE, IR LED ON) S / N Ratio 50dB Video Out DIP conn[...]

English _61 ● APPENDIX Items Description Operational IR LED 31 ea Viewable Length 30m Camera Title Off / On (Displayed up to 15 characters) Day & Night Auto (ICR) / Color / B/W Backlight Compensation Off / BLC / HLC Wide Dynamic Range - Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Digital Noise Reduction SSNRIII (2D+3D N[...]

appendix 62_ appendix Items Description Network Ethernet RJ-45 (10/100BASE-T) Video Compression Format H.264, MPEG-4, MJPEG Resolution 1280x1024, 1280x720P(HD), 1024x768, 800x600, 640x480, 320x240 Max. Framerate 22fps (1280x1024), 30fps (720P HD) Video Quality Adjustment H.264/MPEG-4 : Compression Level, Target Bitrate Level Control MJPEG : Quality[...]

English _63 ● APPENDIX Items Description Network Memory Slot - ONVIF Conformance Yes Webpage Language English, French, German, Spanish, Italian, Chinese, Korean, Russian, Japanese, Swedish, Denish, Portuguese, Czech, Polish, Turkish, Rumanian, Serbian, Dutch, Croatian, Hungarian, Greek Web Viewer Supported OS : Windows XP / VISTA / 7, MAC OS Supp[...]

appendix 64_ appendix PRODUCT OVERVIEW 246.8 216 262.8 Ø86 Ø77[...]

English _65 ● APPENDIX 316.8 332.8 86 86.1[...]

appendix 66_ appendix TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. Check to make sure that the camera’s Network settings are appropriate. Check to make sure that all network cables have been connected properly. If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses without any p[...]

English _67 ● APPENDIX PROBLEM SOLUTION No JPEG file is transferred via e-mail on occurrence of intelligent video analysis event of camera even when the <IV analysis function> is set to <Enable>. Verify the settings in the following sequence: A. Check <Data & Time> settings. B. The <IV analysis function> should be set [...]

OPEN SOURCE ANNOUNCEMENT Some software components of this product incorporate source code covered under the BSD license as follows. Component Name License License URL lighttpd 1.4.25 librtp 1.20 BSD 2.0 BSD 1.0 http://www.opensource.org/licenses/bsd-license.html lighttpd is a secure, fast, compliant, and very fl exible web-server that has been opt[...]

Copyright (c) 1998-2001 University College London All rights reserved. Redistribution and use in source and binary forms, with or without modifi cation, is permitted provided that the following conditions are met : 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Red[...]

GPL/LGPL SOFTWARE LICENSE The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Correspondin[...]

original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's [...]

based on the Program is not required to print an announcement.) These requirements apply to the modifi ed work as a whole. If identifi able sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you[...]

However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative w[...]

a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the[...]

WARRANTY ; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program ; if not, write to the Free Software Foundation, Inc.,51 Franklin Street, Fifth Floor, Boston, MA 02110-13[...]

or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others. For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you rece[...]

An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work un[...]

3. Protecting Users' Legal Rights From Anti-Circumvention Law. No covered work shall be deemed part of an effective technological measure under any applicable law fulfi lling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures. When yo[...]

model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access [...]

or installed by the recipient, or for the User Product in which it has been modifi ed or installed. Access to a network may be denied when the modifi cation itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network. Corresponding Source conveyed, and Installation [...]

or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explic[...]

Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a “patent license” is any express agreement or co[...]

work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such. 14. Revised Versions of this License. The Free Software Fou[...]

USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the fi rst released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take [...]

Public License therefore permits such linking only if the entire combination fi ts its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the “Lesser” General Public License because it does Less to protect the user’s freedom than the ordinary General [...]

is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library’s complete source code as you receive it, in a[...]

it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under [...]

1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine readable “ work that uses the Library”, as object code and/or source code, so that the user can modify the Library and then relink to produce a modifi ed executable containing the modifi ed Library. (It is understood that the user who changes [...]

it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and condi[...]

later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation. 14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to a[...]

WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston[...]

Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@ cryptsoft. com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft. com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are[...]

Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. This equipment has[...]

SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefi eld Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-[...]