Samsung SND-3080F инструкция обслуживания

NETWORK CAMERA User Manual SND-3080(P)[...]

Copyright ©2010 Samsung Techwin Co., Ltd. All rights reserved. Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd. Other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Samsung Techwin Co., Ltd shall[...]

English _3 ● OVERVIEW CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit. This symbol [...]

overview 4_ overview Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fi re or electric shock. If any unusual smells or smoke come from the unit, stop using the product. In such case, immediately disconnect the power source and contact the service center. Continued use in such a condition may cause fi re or electric[...]

English _5 ● OVERVIEW CAUTION Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference. Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high humidity. Doing so may cause fi re or electric shock. If yo[...]

overview 6_ overview FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : 1) This device may not cause harmful interference, and 2) This device must accept any interference received including interference that may cause undesired operation. CAUTION This equipment has been tested an[...]

English _7 ● OVERVIEW IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources[...]

overview 8_ overview OVERVIEW 3 7 Important Safety Instructions 10 Product Features 10 Recommended PC Specifi cations 11 What’s Included 12 At a Glance CONTENTS INSTALLATION & CONNECTION 16 16 Removing the Covers 17 Inserting/Removing an SD Memory Card 18 Memory Card Information (Not Included) 19 Connecting with Other Device 21 Installation [...]

English _9 ● OVERVIEW WEB VIEWER 45 45 Connecting to the Camera 46 Login 47 Installing Activex 48 Using the Live Screen 49 Backup 51 Using the SD Search Viewer Screen SETUP SCREEN 52 52 Accessing the Setup Screen 53 Default Setup 58 System Setup 61 Overlay Setup 62 Event Setup 69 Network Setup APPENDIX 70 70 Profi le 71 Terminology 72 Specifi c[...]

overview 10_ overview PRODUCT FEATURES Support various communication protocols Supports TCP/IP, UDP, RTP/RTSP, SMTP for email, and FTP protocols as well as various internet protocols such as ARP, HTTP, HTTPS and DHCP. Web Browser-based Monitoring Using the Internet web browser to display the image in a local network environment. Automatic Local IP [...]

English _11 ● OVERVIEW WHAT’S INCLUDED Please check if your camera and accessories are all included in the product package. Camera User Manual/ IP INSTALLER DVD Quick Guide Test Monitor Cable Screw Dust-proof Plate The Test Monitor Cable is connected to a portable displayer and used for testing the camera. If you intend to use it for an actual [...]

overview 12_ overview AT A GLANCE Appearance Item Description  Dome Cover Case cover used to protect the lens and the main unit. b Main Unit Consists of: lens, switch board, PCB and screws. c Power Port Used to plug in the power cable.  Video Output Port Used to connect the Video In connector of the monitor, from which the video signal of the[...]

English _13 ● OVERVIEW Inside Item Description  Alarm In / Out terminals Alarm in/out terminals can be confi gured as follows: - ALARM IN : Terminal for Alarm Input. - ALARM OUT : Terminal for Alarm Output. - GND : Grounding terminal. b SD Memory Card Compartment Compartment for the SD memory card. c Reset Button Resets the camera settings. P[...]

overview 14_ overview Components 4 5 6 Lens 1 2 3 9 7 8[...]

English _15 ● OVERVIEW Item Description  Inner Cover Cover used to protect the main unit. b Wing-Side Hook Tap on either end to remove the inner cover. c Monitor Out The Test Monitor Cable is connected to a portable displayer and used for testing the camera.  Zoom Lever Used to adjust or fix the zoom factor of the lens.  Focus Lever Turn[...]

16_ installation & connection installation & connection REMOVING THE COVERS If you want to connect the Alarm I/O connectors, you must remove the dome cover and lens cover beforehand. Turn the dome cover counter-clockwise. Remove the dome cover by lifting it up. Tap on either end of the lens cover to remove it. 1. 2. 3.[...]

English _17 ● INSTALLATION & CONNECTION INSERTING/REMOVING AN SD MEMORY CARD Inserting an SD Memory Card Push the SD memory card in the direction of the arrow shown in the diagram. Do not insert the SD memory card while it’s upside down by force. Otherwise, it may damage the SD memory card. Removing an SD Memory Card Gently press down on th[...]

installation & connection 18_ installation & connection MEMORY CARD INFORMATION (NOT INCLUDED) What is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’s suitable for you[...]

English _19 ● INSTALLATION & CONNECTION CONNECTING WITH OTHER DEVICE Power Supply Connect the power adaptor to the power input port. Be careful not to reverse the polarity when you connect the power cable. You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera. Connecting to the monitor Connect the [ V_OUT[...]

installation & connection 20_ installation & connection Connecting to the I/O port box Connect the Alarm I/O cable to the corresponding port of the inner port box. ALARM IN 1, 2 : Used to connect the alarm input signal. GND : Used for earth-grounding. ALARM OUT 1, 2 : Used to connect the alarm output signal. Alarm I/O Wiring Diagram y y y 1[...]

English _21 ● INSTALLATION & CONNECTION INSTALLATION Precautions before installation Ensure you read the following instructions before installing the camera: Select an installation site (ceiling or wall) that can endure at least 5 times of the camera weight. Stuck-in or peeled-off cables can cause damage to the product or a fire. For safety p[...]

installation & connection 22_ installation & connection Use the provided screws (x3) to fi x the bracket to a desired position (ceiling or wall). Ensure that the < CAMERA FRONT > label on the bracket faces the direction for camera monitoring. Arrange the cables through the bracket to the ceiling or wall. If you drill a hole in the ce[...]

English _23 ● INSTALLATION & CONNECTION Adjusting the monitoring direction for the camera You can adjust the camera direction only when the camera is fixed on the ceiling. Then, turning the camera to the left or right is referred to as "Panning", while tilting the angle is "Tilting". For panning, the panning limit is 220˚[...]

24_ camera setup You can configure the camera settings using the Web Viewer. For accessing the Web Viewer, refer to " Network Connection and Setup ". (page 34 ) HOW TO USE THE KEYBOARD CONTROLLER Follow the steps below if you run the Web Viewer for setting the menus. Launch the Web Viewer. From the [ Camera OSD ] menu in the left pane, cl[...]

English _25 ● CAMERA SETUP MAIN MENU You can configure the camera settings to your preference. PROFILE You can select a mode that is appropriate to the camera installation environment. CAMERA SET Confi gure the camera functions and settings. PRIVACY ZONE You can confi gure the privacy settings. OTHER SET You can confi gure more settings includ[...]

26_ camera setup camera setup CAMERA SETUP You can configure the general settings of the camera module. Use the four direction ( ▲▼◄ ► ) buttons to select a desired item. CAMERA ID Provide the ID and position for a camera that displays on the screen. For selecting and saving each menu item, refer to " How to use the keyboard controller[...]

English _27 ● CAMERA SETUP MOTION You can specify a level of AGC for controlling the camera motion. Select F.FAST if you want to monitor a very fast moving object in a low contrast scene, and S.SLOW if monitoring a very slow moving, inanimate object in the same condition. As long as DAY/NIGHT is set to AUTO, the < MOTION > menu is not avail[...]

28_ camera setup camera setup DAY/NIGHT You can specify a recording mode according to the scene. For selecting and saving each menu item, refer to " How to use the keyboard controller ". (page 24) Select < CAMERA SET > - < DAY/NIGHT >. Select a screen transition mode according to the illumination, and set options as appropriat[...]

English _29 ● CAMERA SETUP WHITE BAL If you need to adjust the screen brightness, use the WHITE BALANCE function. For selecting and saving each menu item, refer to " How to use the keyboard controller ". (page 24) Select < CAMERA SET > - < WHITE BAL >. Select a mode where you set the balance. DAY : You can set the RED, and B[...]

30_ camera setup camera setup AGC COLOR SUP This will adjust the color scheme according to the AGC value. REVERSE This will reverse the signal left to right, top to bottom, or a combination of the preceding. POSI/NEGA This will display the video brightness signal either normally or reversely. PIP You can view a main image with a sub image on the sa[...]

English _31 ● CAMERA SETUP PRIVACY ZONE You can set up to 12 privacy zones that will be hided for privacy of the subject when recording. For selecting and saving each menu item, refer to " How to use the keyboard controller ". (page 24) ZONE SETUP Select < MAIN MENU > - < PRIVACY ZONE >. Use the four direction ( ▲▼◄ ?[...]

32_ camera setup camera setup OTHERS You can reset the camera, or select the OSD font color to your preference. For selecting and saving each menu item, refer to " How to use the keyboard controller ". (page 24) LANGUAGE You can slect a preferred language for the screen display. Select your language by using the left and right keys. FACTO[...]

English _33 ● CAMERA SETUP SYSTEM INFO You can check the system information. For selecting and saving each menu item, refer to " How to use the keyboard controller ". (page 24) Select < MAIN MENU > - < SYSTEM INFO >. The current system information is displayed. The camera type may different, depend on the video signal. 1. 2.[...]

34_ network connection and setup network connection and setup You can set up the network settings according to your network configurations. Before installing or while using this program, visit the Samsung website www.samsungsecurity.com and download and upgrade with the latest S/W version available. CONNECTING THE CAMERA TO AN IP ROUTER WITH THE XD[...]

English _35 ● NETWORK CONNECTION AND SETUP ex3) If the address (LAN IP) of the IP router is 192.168.xxx.1 IP address: 192.168.xxx.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.xxx.1 For the address of the IP router, refer to the product’s documentation. Checking if the IP router is connected to the xDSL/Cable modem properly Select <[...]

36_ network connection and setup network connection and setup Follow the instructions below if you select < Use the following IP address >: ex1) If the address (LAN IP) of the IP router is 192.168.1.1 IP address: 192.168.1.100 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.1.1 ex2) If the address (LAN IP) of the IP router is 192.168.0.1 [...]

English _37 ● NETWORK CONNECTION AND SETUP When the IP Router is connected, the login window appears and prompts you to enter the password. For the login IP and the password, refer to the IP router’s documentation. When done, you will see the setup window of the IP router. In the setup menu, select “ Automatic Confi guration-DHCP ” for Int[...]

38_ network connection and setup network connection and setup BUTTONS USED IN IP INSTALLER Item Description  Device Name Model name of the connected camera. Click the column to sort the list by model name. However, search will be stopped if clicked during the search. b Mode Displays either < Static > or < Dynamic > for the current ne[...]

English _39 ● NETWORK CONNECTION AND SETUP Item Description  URL DDNS URL address enabling access from the external Internet. However, this will be replaced with the < IP Address > of the camera if DDNS registration has failed.  IPv4 Scans for cameras with the IPv4 setting.  IPv6 Scans for cameras with the IPv6 setting.  Search [...]

40_ network connection and setup network connection and setup If using an IP router : IP Address : Enter an address falling in the IP range provided by the IP router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 Subnet Mask : The < Subnet Mask > of the IP router will be the < Subnet Mask > of the camera. Gateway : The < Lo[...]

English _41 ● NETWORK CONNECTION AND SETUP Click [ OK ]. Manual network setup will be completed. When the manual setup including < IP > is completed, the camera will restart. If the IP router has more than one camera connected Configure the IP related settings and the Port related settings distinctly with each other. Category Camera #1 Came[...]

42_ network connection and setup network connection and setup Enter the password. This is the login password for the " admin " user who accesses the camera. The default password is " 4321 ". Click [ OK ]. Auto network setup will be completed. The camera will automatically complete the network setting and restart. DYNAMIC IP SETU[...]

English _43 ● NETWORK CONNECTION AND SETUP PORT RANGE FORWARD (PORT MAPPING) SETUP If you have installed an IP router with a camera connected, you must set the port range forwarding on the IP router so that a remote PC can access the camera in it. Manual Port Range Forwarding From the Setup menu of the IP router, select < Applications & Ga[...]

44_ network connection and setup network connection and setup CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC Launch < IP Installer >. It will scan for connected cameras and display a list of them. Double-click a camera to access. The Internet browser starts and connects to the camera. You can also access the camera in such way you type the I[...]

English _45 ● WEB VIEWER CONNECTING TO THE CAMERA Normally, you would Launch the Internet browser. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.200  http://192.168.1.200 - the Login dialog should appear. • IP address (IPv6) : 2001:230:abcd: ffff:0000:0000:ffff:1111  http://[2001:230:abcd:ffff[...]

web viewer 46_ web viewer To check the DDNS address The DDNS address consists of: <one of the lower-case letters: c, m, p> + <the last 6 digits of the MAC (Ethernet) address> + <websamsung.net> The small letter will be <c> if the first 6 digits of the MAC (Ethernet) address is <00:00:f0>, or <m> if they are <0[...]

English _47 ● WEB VIEWER INSTALLING ACTIVEX If connecting to a camera for the first time, you will see the installation message. Then, install the required ActiveX to access the camera and control the video from it in real time. For Windows XP Service Pack 2 users Click the installation message that pops up when you fi rst access the camera. Cli[...]

web viewer 48_ web viewer USING THE LIVE SCREEN Item Description  SD search Moves to the screen for searching event images from the SD card. b Setup Move to the Setup screen. c About You can check the firmware version, serial number and manufacturer information.  Reset Alarm Resets the Alarm icon. (the Alarm and Motion icons disappear.)  C[...]

English _49 ● WEB VIEWER Item Description  Camera OSD Used to retrieve and customize the Camera Setup menu. For selecting and saving each menu item, refer to “ How to use the keyboard controller ”. (page 24)  Viewer Screen Displays the Live video on the screen. BACKUP You can capture, print out, and save the snapshot in the specified pa[...]

web viewer 50_ web viewer To record a video Click [ ] on the scene to record. You will see the Save AVI dialog; provide the necessary information. Save path : You can change the default saving path. File name : You can change the default fi le name. HDD minimum free size : If the free space on the HDD is less than the recorded space, recording wil[...]

English _51 ● WEB VIEWER USING THE SD SEARCH VIEWER SCREEN Click < SD search > tab in the Live screen. The SD Search Screen appears. Name Function and description  Thumbnail Size The thumbnail images are displayed based on the selected size. b Date You can select the desired date to search for events generated. c Schedule You can select [...]

52_ setup screen ACCESSING THE SETUP SCREEN You can configure the default setting, system, overlay, event and network related settings, and change them as necessary. In the Live screen, click the < Setup > tab. The Setup screen appears. 1. 2. setup screen[...]

English _53 ● SETUP SCREEN DEFAULT SETUP To configure the video settings You can set the video resolution and quality, and select the codec required. Select < Basic > - < Video >. The Video setup screen appears. Brightness : Adjust the screen brightness from 1 to 100. Contrast : Adjust the contrast from 1 to 100. Resolution : Set the [...]

setup screen 54_ setup screen Profi le : Select Baseline or Main for the H.264 profi ling method. Entropy coding* : Reduces the compression loss due to encoding. Motion estimation : Estimates the movement of pixels by determining the motion vector. If you set the profi le to Baseline, the entropy coding is available only for CAVLC*; if you set i[...]

English _55 ● SETUP SCREEN IPv6 confi guration : Obtains the IPv6 address to access the IPv6 network. VNP confi guration : Set a port used to transfer video signals with the Samsung protocols. Device port (TCP) : Used to control the video signal transfer, defaulted to 60001(TCP) . TCP streaming port : Video signal transfer port using TCP protoc[...]

setup screen 56_ setup screen To set the user account Click < Basic > - < User >. The User setup window appears. Login authentication : You can set to authenticate the login by the user. If you select < Enable >, the user should have gone through the login authentication; if selecting < Disable >, every user can access the s[...]

English _57 ● SETUP SCREEN To edit a registered user account From the User setup window, select a user ID to change. From the User setup window, click [ Modify ]. The Modify user window appears. Change the < User ID >, < Password >, < Confi rm password >, and < Level > as you wish. Click [ Apply ]. The selected user ID wi[...]

setup screen 58_ setup screen SYSTEM SETUP To set the date/time You can obtain the current system time from the NTP server or your PC for your time setting. Select < System > - < Date & Time >. The Date & Time setup window appears. If you select Manual, input the date and time manually. Your settings will be saved. Current syste[...]

English _59 ● SETUP SCREEN To check the log information Select < System > - < Log >. The Log information list appears. System log list : Shows the log information about the system changes along with time and IP address. User login : Shows the current login user to the camera. Video confi guration change : Show video setting changes. [...]

setup screen 60_ setup screen If the network is disconnected, the power supply fails, or the PC abnormally operates during the update, the system does not work at all. To reset the system Restart or reset the system if it does not work properly or causes a problem. Select < System > - < Reset >. The Reset window appears. Restart : Resta[...]

English _61 ● SETUP SCREEN Install a public certifi cate : To install the certifi cate to camera, you need to type a certifi cate name (it can be arbitrarily assigned by user), certifi cate fi le issued from the authority and a key fi le. When done, click [ Install ]. If the certifi cate is installed successfully, the user-defi ned certi?[...]

setup screen 62_ setup screen EVENT SETUP To set the event transfer function You can set the FTP/email server (SMTP) to transfer the alarm images present in the camera, in case an alarm event occurs. Select < Event > - < Transfer setup >. The Image transfer setup window appears. For more information on commercial SMTP services, contact [...]

English _63 ● SETUP SCREEN Upload path : You can specify the path of the FTP directory to which you will transfer an alarm image. You can specify the path by just typing < /directory name > or < directory name > in this fi eld. If nothing is specifi ed, the path will be defaulted to the root directory of the FTP server. Port : The F[...]

setup screen 64_ setup screen To test the email transfer Click [ Test ]. This will test if the image is transferred to the specified SMTP server properly. When the test on the SMTP server connection and transfer is done, a message of < ( Verified ) > will be displayed. You will see an error message if the test fails. If this is the case, chec[...]

English _65 ● SETUP SCREEN To set an alarm image You can configure to send message via FTP/E-mail (SMTP) or to save recording into the SD memory card. Select a transfer method when an event occurs or the schedule transfer function is activated. Select < Event > - < Alarm image >. The Alarm Image setup window appears. Transfer mode : Y[...]

setup screen 66_ setup screen To set the alarm input Select < Event > - < Alarm input 1 > or < Alarm input 2 >. The Alarm Input setup window appears. When done, click [ Apply ]. Your settings will be saved. Input device setup : Select an input type according to the characteristics of the alarm sensor on the rear of the camera. Off[...]

English _67 ● SETUP SCREEN To set the motion detection function Select < Event > - < Motion >. The Motion Detection setup window appears. When done, click [ Apply ]. Your settings will be saved. M.D. function : If selecting < Enable >, the motion detection function will be activated; if selecting < Disable >, it will not o[...]

setup screen 68_ setup screen To set a motion area You can set a specific area to detect a motion in. From the Motion Detection setup window, click [ Setup ] in the < Motion area >. The Motion Area window appears. You can set a specifi c area to detect a motion in. Click over square boxes corresponding to the target motion area. The selected[...]

English _69 ● SETUP SCREEN NETWORK SETUP To set the video transfer mode You can control the transfer rate according to the video transfer mode and network speed. Select < Network > - < Streaming type >. The Video Transfer setup window appears. When done, click [ Apply ]. Your settings will be saved. VNP streaming : You can set the Sam[...]

70_ appendix PROFILE CAMERA SETUP MENU STANDARD ITS BACKLIGHT DAY/NIGHT GAMING BANK Parent Menu Sub-menus IRIS ALC ALC ALC ALC ALC ALC ALC ------ LENS DC DC DC DC DC DC LEVEL 000000 BACKLIGHT OFF OFF WDR OFF OFF WDR MOTION (F.FAST) --- (F.FAST) --- NORM (F.FAST) --- SLOW (F.FAST) --- DNR MID MID MID MID MID MID SHUTTER OFF AUTO 1/250 OFF OFF OFF OF[...]

English _71 ● APPENDIX TERMINOLOGY GOP : The default is 15, and if set to 15, one I-Frame will be output per 15 frames as one I-Frame and 14 P-Frames constitute the GOP. The lower the GOP size is, the better the quality is; however, the bit rate as well as the data size will increase, causing a lower of the fps. GOP(Group of Pictures) is a set of[...]

appendix 72_ appendix SPECIFICATIONS Item Description NTSC PAL Camera Type Color/BW Color Image Device 1/3" Super-HAD PS CCD Pixels Total 811 x 508 795 x 596 Effective 768 x 494 752 x 582 Scanning System Progressive Horizontal Frequency 15.734 Hz 15.625 Hz Vertical Frequency 59.94 Hz 50 Hz Min. Scene Illumination Color Sens off : 0.12 Lux(15 I[...]

English _73 ● APPENDIX Item Description NTSC PAL Resolution Horizontal 600 TV Lines Vertical 350 TV Lines Video Output Video Output VBS 1.0Vp-p S/N Ratio S/N Ratio about 52 dB Lens Lens Drive Type AI (DC) Mount Type Board Type Network Board OS Embedded Linux Hardware Flash memory 32M byte RAM 256M byte DSP TI Davinci Ethernet RJ-45 (10/100BASE-T)[...]

appendix 74_ appendix Item Description NTSC PAL Protocol IP IPv4 / IPv6 Network Protocol IPv4 TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, HTTPS, SSL, DHCP PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, VSIP IPv6 TCP/IP, HTTP, HTTPS, SSL, DHCP Streaming Unicast (TCP, UDP), Multicast (UDP) Security HTTPS Login Authentica[...]

English _75 ● APPENDIX Item Description NTSC PAL SDK HTTP API CGI Command Provides functionality to control cameras and set/retrieve internal parameter values. Get JPEG image or MJPEG stream Alarm In/Out control RTP/RTSP API RTP Header, RTSP Command Document ActiveX SDK ActiveX API for viewing data streams from IP camera. Power AC24V±10%(60Hz±0[...]

appendix 76_ appendix FRAME RATE (NTSC) Test Condition: MJPEG - Resolution(CIF), Quality(1), Frame rate(1) H.264 - Bitrate control(CBR), Compression(40), Encode Priority(Frame rate), GOP size(15), Deblock(ON), Profi le(Baseline), Entropy coding(CAVLC), Motion estimation(HPel) MPEG4 - Bitrate control(CBR), Compression(40), Encode Priority(Frame rat[...]

English _77 ● APPENDIX H.264 (4CIF) Frame Rate Quality 30 FPS 15 FPS 8 FPS 3 FPS 1 FPS LEVEL10 2298 Kbps 19 FPS 1229 Kbps 10 FPS 737 Kbps 6 FPS 369 Kbps 3 FPS 147 Kbps 1 FPS LEVEL9 1751 Kbps 19 FPS 1198 Kbps 13 FPS 645 Kbps 7 FPS 369 Kbps 4 FPS 111 Kbps 1 FPS LEVEL8 1536 Kbps 20 FPS 1075 Kbps 14 FPS 538 Kbps 7 FPS 307 Kbps 4 FPS 92 Kbps 1 FPS LEV[...]

appendix 78_ appendix MPEG4 (VGA) Frame Rate Quality 30 FPS 15 FPS 8 FPS 3 FPS 1 FPS LEVEL10 4055 Kbps 22 FPS 2580 Kbps 14 FPS 1290 Kbps 7 FPS 737 Kbps 4 FPS 221 Kbps 1 FPS LEVEL9 3533 Kbps 23 FPS 2304 Kbps 15 FPS 1075 Kbps 7 FPS 614 Kbps 4 FPS 184 Kbps 1 FPS LEVEL8 2949 Kbps 24 FPS 1843 Kbps 15 FPS 860 Kbps 7 FPS 492 Kbps 4 FPS 147 Kbps 1 FPS LEVE[...]

English _79 ● APPENDIX H.264 (VGA) Frame Rate Quality 30 FPS 15 FPS 8 FPS 3 FPS 1 FPS LEVEL10 2089 Kbps 17 FPS 1229 Kbps 10 FPS 737 Kbps 6 FPS 369 Kbps 3 FPS 147 Kbps 1 FPS LEVEL9 1659 Kbps 18 FPS 1014 Kbps 11 FPS 553 Kbps 6 FPS 276 Kbps 3 FPS 111 Kbps 1 FPS LEVEL8 1459 Kbps 19 FPS 845 Kbps 11 FPS 538 Kbps 7 FPS 307 Kbps 4 FPS 92 Kbps 1 FPS LEVEL[...]

appendix 80_ appendix MPEG4 (CIF) Frame Rate Quality 30 FPS 15 FPS 8 FPS 3 FPS 1 FPS LEVEL10 1382 Kbps 30 FPS 691 Kbps 15 FPS 369 Kbps 8 FPS 184 Kbps 4 FPS 55 Kbps 1 FPS LEVEL9 1152 Kbps 30 FPS 576 Kbps 15 FPS 307 Kbps 8 FPS 154 Kbps 4 FPS 46 Kbps 1 FPS LEVEL8 922 Kbps 30 FPS 461 Kbps 15 FPS 246 Kbps 8 FPS 123 Kbps 4 FPS 37 Kbps 1 FPS LEVEL7 691 Kb[...]

English _81 ● APPENDIX H.264 (CIF) Frame Rate Quality 30 FPS 15 FPS 8 FPS 3 FPS 1 FPS LEVEL10 922 Kbps 30 FPS 461 Kbps 15 FPS 215 Kbps 7 FPS 123 Kbps 4 FPS 37 Kbps 1 FPS LEVEL9 691 Kbps 30 FPS 346 Kbps 15 FPS 184 Kbps 8 FPS 92 Kbps 4 FPS 28 Kbps 1 FPS LEVEL8 576 Kbps 30 FPS 288 Kbps 15 FPS 134 Kbps 7 FPS 77 Kbps 4 FPS 23 Kbps 1 FPS LEVEL7 461 Kbp[...]

appendix 82_ appendix FRAME RATE (PAL) Test Condition: MJPEG - Resolution(CIF), Quality(1), Frame rate(1) H.264 - Bitrate control(CBR), Compression(40), Encode Priority(Frame rate), GOP size(15), Deblock(ON), Profi le(Baseline), Entropy coding(CAVLC), Motion estimation(HPel) MPEG4 - Bitrate control(CBR), Compression(40), Encode Priority(Frame rate[...]

English _83 ● APPENDIX H.264 (4CIF) Frame Rate Quality 25 FPS 13 FPS 6 FPS 3 FPS 1 FPS LEVEL10 2359 Kbps 16 FPS 1180 Kbps 8 FPS 737 Kbps 5 FPS 442 Kbps 3 FPS 147 Kbps 1 FPS LEVEL9 1991 Kbps 18 FPS 1106 Kbps 10 FPS 664 Kbps 6 FPS 332 Kbps 3 FPS 111 Kbps 1 FPS LEVEL8 1751 Kbps 19 FPS 1014 Kbps 11 FPS 553 Kbps 6 FPS 276 Kbps 3 FPS 92 Kbps 1 FPS LEVE[...]

appendix 84_ appendix MPEG4 (VGA) Frame Rate Quality 25 FPS 13 FPS 6 FPS 3 FPS 1 FPS LEVEL10 4424 Kbps 20 FPS 2654 Kbps 12 FPS 1327 Kbps 6 FPS 664 Kbps 3 FPS 221 Kbps 1 FPS LEVEL9 3871 Kbps 21 FPS 2212 Kbps 12 FPS 1106 Kbps 6 FPS 553 Kbps 3 FPS 184 Kbps 1 FPS LEVEL8 3097 Kbps 21 FPS 1769 Kbps 12 FPS 885 Kbps 6 FPS 442 Kbps 3 FPS 147 Kbps 1 FPS LEVE[...]

English _85 ● APPENDIX H.264 (VGA) Frame Rate Quality 25 FPS 13 FPS 6 FPS 3 FPS 1 FPS LEVEL10 2507 Kbps 17 FPS 1327 Kbps 9 FPS 737 Kbps 5 FPS 442 Kbps 3 FPS 147 Kbps 1 FPS LEVEL9 1991 Kbps 18 FPS 1217 Kbps 11 FPS 664 Kbps 6 FPS 332 Kbps 3 FPS 111 Kbps 1 FPS LEVEL8 1659 Kbps 18 FPS 1106 Kbps 12 FPS 553 Kbps 6 FPS 276 Kbps 3 FPS 92 Kbps 1 FPS LEVEL[...]

appendix 86_ appendix MPEG4 (CIF) Frame Rate Quality 25 FPS 13 FPS 6 FPS 3 FPS 1 FPS LEVEL10 1382 Kbps 25 FPS 664 Kbps 12 FPS 332 Kbps 6 FPS 166 Kbps 3 FPS 55 Kbps 1 FPS LEVEL9 1152 Kbps 25 FPS 553 Kbps 12 FPS 276 Kbps 6 FPS 138 Kbps 3 FPS 46 Kbps 1 FPS LEVEL8 922 Kbps 25 FPS 442 Kbps 12 FPS 221 Kbps 6 FPS 111 Kbps 3 FPS 37 Kbps 1 FPS LEVEL7 691 Kb[...]

English _87 ● APPENDIX H.264 (CIF) Frame Rate Quality 25 FPS 13 FPS 6 FPS 3 FPS 1 FPS LEVEL10 922 Kbps 25 FPS 442 Kbps 12 FPS 221 Kbps 6 FPS 111 Kbps 3 FPS 37 Kbps 1 FPS LEVEL9 691 Kbps 25 FPS 332 Kbps 12 FPS 166 Kbps 6 FPS 83 Kbps 3 FPS 28 Kbps 1 FPS LEVEL8 576 Kbps 25 FPS 276 Kbps 12 FPS 138 Kbps 6 FPS 69 Kbps 3 FPS 23 Kbps 1 FPS LEVEL7 461 Kbp[...]

appendix 88_ appendix TROUBLESHOOTING PROBLEM SOLUTION I can’t access the camera from a web browser. Check to make sure that the camera’s Network settings are appropriate. Check to make sure that all network cables have been connected properly. If connected using DHCP, verify that the camera is able to acquire dynamic IP addresses without any p[...]

English _89 ● APPENDIX PROBLEM SOLUTION I enabled Motion Detection Feature under Motion Detection, but .jpg files are not getting sent over FTP/ SMTP even after motion detection occurs at the FT camera. Verify the settings in the following sequence: A. NTP must be properly configured. B. Motion Detection Feature must be enabled. C. Alarm Video Tr[...]

GPL/LGPL SOFTWARE LICENSE The software included in this product contains copyrighted software that is licensed under the GPL/LGPL. You may obtain the complete Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Correspondin[...]

The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law : that is to say, a work containing the Program or a portion of it, either verbatim or with modifi cations and/or translated into another language. (Hereinafter, transla[...]

associated interface defi nition fi les, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form)with the major components (compiler, kernel, and so on)of the operating syste[...]

for permission. For software which is copyrighted by the Free Software Foundation,write to the Free Software Foundation ; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY [...]

consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright © 2007 Free Software Foundation, Inc. <http://fsf.org/> Everyone is permitted to copy and distribu[...]

copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modifi cation), making available to the public, and in some countries other activities as well. To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere int[...]

means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures. 4. Conveying Verbatim Copies. You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appr[...]

Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. A “User Product” is either (1) a “consumer product”, which means any tan[...]

All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further [...]

sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version. In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringemen[...]

Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version. 15. Disclaimer of Warranty. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN[...]

if the library is modifi ed by someone else and passed on, the recipients should know that what they have is not the original version, so that the original author’s reputation will not be affected by problems that might be introduced by others. Finally, software patents pose a constant threat to the existence of any free program. We wish to make[...]

any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferr[...]

When a “work that uses the Library” uses material from a header fi le that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially signifi cant if the work can be linked without the Library, or if the work is itself a library. The thres[...]

8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from yo[...]

PARTIES PROVIDE THE LIBRARY “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL[...]

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS” AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLA[...]

Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. Correct Disposal o[...]

SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 www.samsungcctvusa.co[...]