Samsung SCC-931TP инструкция обслуживания

ANTI-V ANDAL DOME CAMERA SCC-931T(P) User ’ s Manual Bedienungsanleitung Guide de l’utilisateur Guía del Usuario Manuale d’uso E D F Es I 00355A(01) SCC-931T(P)-eng 2006.1.10 1:49 PM Page 1[...]

2 3 E E Impor tant Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer ’ s instructions. 8. Do not install near any [...]

E 5 E 4 T able of Contents Chapter 1 Over view This chapter briefly introduces the Camera and describes its key features, part names and functions. Chapter 1 Overview 5 Introduction 6 Part Names and Functions 7 Chapter 2 Installing the Camera 9 Checking the Contents of the Package 10 Precautions for Installation and Use 12 Preparing Cables 14 Insta[...]

E 7 E 6 Introduction Par t Names and Functions The Anti-V andal Dome Camera is a dome-typed surveillance device that offers the best features of surveillance for banks, retail stores, commercial buildings, industrial settings, and etc. It is designed to withstand intentional or accidental impact or vandalism, and is waterproof, dustproof, and shock[...]

8 9 Par t Names and Functions E E ❶ Camera Operation Switches (Setup Switches) The functions of the camera operation switches change depending on whether the Camera is currently in the usual operation mode (i.e., the setup menu is not showing on the screen) or the setup menu mode. ➻ In the usual operation mode - [UP/DOWN] Directional keys: The [...]

10 11 Before Installation E E Checking the Contents of the Package Be sure to check that the following items are included in the package. Anti-V andal Dome Camera User’s Guide ALARM & RS485 Cable User’s Guide ✔ PLASTIC ANCHOR 2 ea. ❙ ❙ for ceiling installation ✔ ASSY SCREW T APPING 2 ea. ❙ ❙ for ceiling installation (TH M4 X L30[...]

12 13 Before Installation E E Precautions for Installation and Use Installation Examples ✔ Please check whether the installation site can sufficiently support the weight of the Camera before installation. ✔ Make sure that the cable is not caught on anything or its insulation sheath is not removed. (Neglecting to do so may cause fire or damage t[...]

14 15 Preparing Cables E E Installing the Camera The following cables are required to install and use the Camera. Power Adapter Cable Video Cable The power adapter that plugs into the Camera’s power input receptacle has the rated volt- age of DC 12V 600mA or AC 24V 300mA. The cable that connects the video output terminal of the Camera to the moni[...]

16 17 Installing the Camera E E 6. Adjust the LENS direction. 1) Turn the STOPPER RING counter-clockwise as shown in the illustration to move the LENS body and COVER LENS. 2) Move the LENS body to adjust the vertical direction and turn the LENS body together with the COVER LENS to adjust the horizontal direction. (There is a stopping mechanism on t[...]

18 19 Installing the Camera E E 6. Remove the DOME COVER to adjust the LENS direction. 1) Use the supplied L WRENCH to unfasten the 4 BOL TS for CASE fixing by turning them counter- clockwise as shown in the illustration. 2) Disassemble the ASSY -DOME in the direction shown in the illustration. 7. Adjust the LENS direction and assemble the DOME COV[...]

20 21 Installing the Camera E E 7) Route the cables through the PIPE assembly hole on the side of the PIPE, align the INDEX KEY arrow mark ( ) of the CAMERA body to the groove on the CAMERA, mount the CAMERA body and turn it clockwise all the way tight, and then fasten the two SCREWS. 8) Use a “minus” screwdriver or a coin to turn the CAP BOL T[...]

E 23 E 22 Connecting Cables and Checking Operations 1. First connect one end of the BNC cable to the VIDEO OUT . 2. Next, connect the other end of the BNC cable to the video input terminal of the monitor . 3. Then, plug in the power adapter . Use a “minus” screwdriver to connect one part of the power adapter consisting of two lines to the power[...]

E 25 E 24 Structure of the Setup Menu ON... ALC... MANU... MANU... LINE... ON... CAMERA ID ON.../OFF CAMERA ID SETUP CAMERA ID POSITION SETUP AREA SETUP BLC SETUP LEVEL SETUP LEVEL SETUP 3200K/5600K/USER RED, BLUE SETUP PHASE SETUP AREA SETUP SENSITIVITY SETUP RS485, PRESET D-ZOOM, PIP , MIRROR, POSI/NEGA ZOOM SPEED DET AIL SETUP LANGUAGE IRIS ALC.[...]

26 27 CAMERA MENU Or ganization E E ➼ ALC (Auto Light Control) If you set the IRIS to ALC and press the [ENTER] key , a submenu screen where you can set the video output level and BLC will be displayed. In the LEVEL item, you can use the [LEFT/RIGHT] keys to set the video output level. If you set the BLC menu to ON, the BLC function will be appli[...]

28 29 CAMERA MENU Or ganization E E AUTO FOCUS In the AUTO FOCUS menu, you can specify the Focus method. Y ou can set the Focus to ONEAF , AF , or MF . ➼ AF (Auto Focus) Automatically FOCUSes by continuously monitoring the screen with the AUTO FOCUS MODE. In the AF MODE, a FOCUS key press will not be processed because Focusing is done automatical[...]

30 31 CAMERA MENU Or ganization E E AGC/MOTION ➼ AGC (Auto Gain Control) Y ou can specify whether to control the AGC GAIN when the obtained video is below a certain level of brightness because it was recorded under insufficient lighting. From the SET UP MENU, use the UP/DOWN keys while in the high-speed SHUTTER (1/100 ~ 1/10K) mode or OFF mode to[...]

32 33 CAMERA MENU Or ganization E E ➼ AT W Set the WHITE BAL menu to A TW . ➼ AW C Set the WHITE BAL menu to A WC and press the [ENTER] key with a piece of white paper placed in front of the lens. In the A WC mode, Auto White Balance Control works only when the [ENTER] key is pressed. ➼ MANU (Manual White Balance) If you select the MANU... it[...]

34 35 CAMERA MENU Or ganization E E ➼ CTRL TYPE This function is not used on the Anti-V andal Dome Camera. ➼ RS485 Select the Baud Rate (4800, 9600, 19200, or 38400 bps) and Camera Address (0~255) for RS485 communication. When using a multiple number of cameras, each must use a different address. (If the same address is used, communica- tion ma[...]

36 37 CAMERA MENU Or ganization E E Y ou can store up to 10 Zoom and Focus positions with the PRESET . The PRESET function can be used when you connect the SSC-1000(Controller[Sold Separately]) and RS485. When you select the ON... item and press the [ENTER] key , you can use the [LEFT , RIGHT , UP , DOWN] keys to set the PIP position. When you sele[...]

38 39 CAMERA MENU Or ganization E E Y ou can move the cursor to the SENSITIVITY position and use the [LEFT/RIGHT] keys to set the sensitivity for MOTION detection (LOW , MEDIUM, HIGH). After setting the position in the same way you did with BLC AREA, press the [ENTER] key to return to the previous MOTION DET MENU. Using the [LEFT , RIGHT , TOP , BO[...]

E 41 E 40 Product Specifications ITEM DESCRIPTION Product T ype Anti-V andal Dome Camera Power Source V oltage AC 24V ± 10% (NTSC:60Hz ± 0.1Hz, P AL:50Hz ± 0.1Hz), DC12V +10% ~ -5% Power Consumption Approx. 6W Broadcast System NTSC(P AL) Standard Color System Imaging Device 1/4 inch IT S-HAD CCD Effective Pixel NTSC : 768(H) X 494(V) P AL : 752([...]

42 Product Specifications E ITEM DESCRIPTION Back Light Compensation Off/On (Area Setting) Sense Up Off/Auto 2x~128x/Fix 2x~128x Digital Zoom Off/On(x10), PIP Motion Detection Off/On (Area/Sensitivity Setting) Video Control POSI/NEGA, MIRROR, Detail Setting Signal Output Composite Video Out : 1.0 Vp-p 75 ohms/BNC Lens Focal length : 3.6 ~ 43.2 mm A[...]