Samsung NC190 инструкция обслуживания

SyncMaster NC190,NC24 0 L C D MONITOR quick start guide[...]

1 Installing the Product 1-1 Package Contents • Unpack the product and check if all of the following conte nts have been included. • Store the packaging box in case you need to move the Product at a later stage. Monitor 1-2 Installing the Stand Before assemb ling the product, pla ce the product down on a flat and stable surface so that the scre[...]

Place a soft cloth over the table to prot ect the product and place the product onto the cloth so that the front of the product is facing downward s. Do not remove the stopper pin before installing the base. Hold the main body of the product with your hand as shown by the fig ure. Insert the stand base into the stand co nnection part in the directi[...]

Installing the Product 1-3 Disassembly is in the reverse order of assembly. 1-3 Installing a Wall Mount Before install ation, disasse mble the product acc ording to the foll owing steps. After the installati on of the base, stand the monitor up as shown in the figure. Now you can remove the stopper pin to adjust the stand. - Caution Avoid lifting t[...]

1-3 Installing the Product This product provides a wall mount of 100 mm x 100 mm(2 00 mm x 100 mm) that complie s with the VESA specifications. 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel an d place the product face do wn. 3. Separate the stand. 4. A[...]

Installing the Product 1-4 •If you use a screw that is longer than the standard s pecifications, the in side of the p roduct may be damage d. •For wall mounts that are not compatible with the standard VESA specific ations, the length of the screw may differ dep ending on the corresponding specifications. •Do not use screws that are incompatib[...]

1-5 Installing the Product 1-5 Connecting Power Connect one end of the power cord to the POWER port of the pro duct and connect the other end of the power cord to a 220V or 110V wall outlet. (The input voltage is switched automati cally.)[...]

Installing the Product 1-6 1-6 Connecting to a nother Monitor Please select the right connection method for yo ur monitor. • When using the [RGB OUT] port • Connect between the [RGB OUT] port on the product and the D-Sub po rt on your m onitor using a D-Sub cable. • When using the [DVI OUT] port • Connect between the [DVI OUT] port on the p[...]

1-7 Installing the Product 1-7 Connecting with a PC Connect the [RGB IN] p ort of the product to the [D-Sub] port of your PC with a D-Sub cable. Use the [RGB IN] port to directly connect the monitor to a PC.[...]

Installing the Product 1-8 1-8 Connecting a Stereo Cable Connect the [AUDIO IN] port on the rear side of the monitor to the sound card of the PC.[...]

1-9 Installing the Product 1-9 Connecting USB The USB port of the monitor sup ports High-Speed Certified USB 1.1. Connect USB devices such as a mouse, keyboard and external storage devices (DSC (Digital Still C amera), MP3, external storage, etc.). You can use a USB device such as a mouse, keyboard, Memory St ick, or external hard disk drive by co [...]

Installing the Product 1-10 1-10 Connecting Headphones Connect your headphone s to the Headphone co nnection terminal. You may connect your headphones to the monitor.[...]

1-11 Installing the Product 1-11 Connecting MIC Connect the microphone cable to the MIC port on the monitor. You may connect your microphone to the monitor.[...]

Installing the Product 1-12 1-12 Kensington Lock A Kensington Lock is an anti-the ft device that enables users to lock the product so that they can safely use it in public locat ions. Since the shape and usag e of the locking device may d iffer depending on the model and the man ufacturer, for more information, refer to the User Manual supplie d wi[...]

1-13 Installing the Product Icon Description MENU/ Press this button to view the On Screen Display (OSD). This button is also used to exit the OS D or to return to a higher-leve l OSD menu * OSD Adjustment Lock This function locks the OSD in order to maintain the current setting s or to prevent the settings from being changed by another person On: [...]

Troubleshooting 2-1 2 Troubleshooting 2-1 Monitor Self-Diagnosis • You can check if the pro duct is working pr operly using the Self-Diagnosis function. • If a blank screen is displa yed and the Power LED blin ks even if the product a nd the PC are properl y connected, perform the self-diagnosis function according to th e procedures below. 1. T[...]

2-2 Troubleshooting The display area suddenly move s to an edge or to the center. Did you change the graphics card or the driver? Pleas e press the [AUTO] button to run the auto adjustment function. Did you change the resolution and frequen cy appropriate to the product? Set the resolution and the frequency to the ap propriate values in the graphic[...]

Troubleshooting 2-3 2-3 FAQ FAQ! Please try the following! How can I change the frequency of the video signal? You have to change the frequency of th e graphics card. (For more information , refer t o the User Manual of the com- puter or the graphics card.) How can I change the resolution? Windows XP : Change the resolution by sele cting Control Pa[...]

2-3 Troubleshooting[...]