Samsung LE32C инструкция обслуживания

LFD DISPLA Y User Manual The color and the appearance may diff er depending on the product, and the specifications are subject to change without prior notice to improv e the per formance. LE32C LE46C LE55C BN46-00330A-03[...]

2 T able of con tents Before U sing the Pr oduc t Cop yright 5 Safety Precautions 6 Symbols 6 Cleaning 6 Storage 7 Electricity and S afety 7 Installation 8 Operation 10 Pr eparations Checking the Conten ts 13 Removing the P ack aging (for LE32C and LE46C models only) 13 Removing the P ack aging (for LE55C models only) 14 Checking the Components 15 [...]

3 T able of con tents P ic ture Mode 60 Custom 61 Color T one 62 Color C ontrol 62 Color T emp . 63 Image Lock 63 A uto Adjustment 64 Signal Balance 64 Signal Balance 64 Signal Contr ol 64 S ize 65 HDMI Black L evel 65 PIP Picture 66 Dynamic Contrast 66 Lamp Contr ol 67 Brightness Sensor 67 Picture Reset 68 P ic ture Mode 69 Custom 70 Color T one 7[...]

4 T able of con tents Eraser 89 Pix el 89 Side G ray 90 Resolution Select 90 P ower On Adjustment 91 OSD Rotation 91 Advanc ed Settings 92 T emperature 92 A uto P ower 92 Button Lock 93 User A uto Color 93 Standby Contr ol 94 Lamp Schedule 94 OSD Display 95 Software Upgrade 96 Setup Reset 97 Reset All 97 Using MDC Multi Contr ol 98 MDC Program Inst[...]

5 Befor e U sing the P roduc t Chapter 01 C opyright The contents of this manual are subject to change without notice to impr ove quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual . Use or reproduction of this manual in parts or entirety without the authorization of Samsung Elec tronics is prohibit ed. Micr[...]

6 Safety Pr ecautions Caution RISK OF ELEC TRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELEC TRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SER VICEABLE P ARTS INSIDE. REFER ALL SER VICING T O QUALIFIED PERSONNEL. This symbol indicates that high voltage is pr esent inside. It is dangerous to make any k ind of contact with an[...]

7 Stor age High- glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby . ― Contact Customer Service Center if the inside of the product needs cleaning (ser vice fee will be charged). Electricit y and Safety ― The following images ar e for ref erence only . Real-life situations may differ fr om wha[...]

8 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result. ! Keep the power socket where the power cord is connected unobst[...]

9 Do not install the product on an unstable or vibrating sur face (insecure shelf , sloped sur face, etc .) • The product may fall and become damaged and/or cause an injury. • Using the product in an area with excess vibration ma y damage the product or cause a fire. ! Do not install the product in a vehicle or a place exposed to dust, moisture[...]

10 Operation W arning There is a high voltage inside the pr oduct. Never disassemble, repair or modify the product yourself . • A fire or electric shock may result. • Contact Samsung Customer Service Center for repairs. ! Before mo ving the product, turn off the power switch and disconnect the power cable and all other connected cables. • Dam[...]

11 ! Do not use or keep combustible spray or an inflammable substance near the product. • An explosion or fire may r esult. Ensure the vents ar e not blocked by tablecloths or cur tains. • An increased internal temperature ma y cause a fire. 1 00 Do not inser t metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (pap[...]

12 ! Rest your eyes for mor e than 5 minutes for every 1 hour of product use. • Eye fatigue will be relieved . Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. ! Store small accessories out of the reach of childr en. ! Exercise caution when adjusting the pr oduct angle or stand heig[...]

13 P repar ations Chapter 02 Checking the Cont ents Removing the P ackaging (for LE32C and LE46C models only) ― The following images ar e for ref erence only . Real-life situations may differ fr om what is shown in the images. 1 Remove the black locking device at the bottom of the box. 2 Remove the styrofoam fr om the product. 3 Check the product[...]

14 Removing the P ackaging (for LE55C models only) ― The following images ar e for ref erence only . Real-life situations may differ fr om what is shown in the images. 1 Remove the black locking device at the bottom of the box. 3 2 1 2 Using the groov es in the box, lift and remove the top of the box. 3 Check the components and remove the styrof [...]

15 - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may diff er from the image shown. - A stand is not provided with the product. T o install a stand, y ou can purchase one separately . Componen ts ― Components may differ in diff erent locations. Quick[...]

16 Items sold separately - The following items can be pur chased at your nearest retailer . W all-mount K it Stand RS232C-Stereo cable ( P. 100 ) DVI cable ( P. 43 ) HDMI-DVI cable ( P. 43 ) HDMI cable ( P. 44 ) Video cable ( P. 47 ) Stereo cable ( P. 23 ) Component cable ( P. 48 ) RCA stereo cable ( P. 50 ) RCA cable ( P. 47 ) A V/Component Adapte[...]

17 P ar ts C ontrol P anel ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to impr ove quality. Buttons Description Brightness Sensor (Optional) Automatically detects the surrounding brightness it accordingly . ― This function is activated only on the models equipped with an auto[...]

18 Rear V iew ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality . RGB IN RJ45 MDC LE32C LE46C, LE55C AV / COMPONENT IN AV / COMPONENT IN RGB/DVI/ HDMI/A V/ COMPONENT AUDIO RS232C IN OUT IN OUT HDMI IN 1 DVI IN HDMI IN 2 CONTROL IN IR OUT RGB IN RJ45 MDC RGB/DVI HDM[...]

19 Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places . ― The locking device shape and lock ing method depend on the manufacturer . Refer to the user guide provided with y our anti-theft lock ing device for details. T o lock an anti-theft locking device: 1 F ix the cable of your anti-theft lock ing[...]

20 - Remote control button functions may differ for diff erent products. Remote C ontrol ― Using other display devices in the same space as the remote contr ol of this product can cause the other display devices to be inadvertently controlled. MENU OFF VOL CH CONTENT (HOME) MagicInfo Lite/S BLANK .QZ 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 DEL-/-- SYMBOL[...]

21 TOOLS INFO MagicInfo 3D LOCK PC A DVI B HDMI C DP D EXIT RETURN Display information on the screen. Move to the upper , lower , left or right menu, or adjust an option's setting. Activates a highlighted menu item. Exit the current menu. Manually select a connec ted input source fr om PC , DVI , or HDMI. . It sets safe lock function. Return t[...]

22 Adjusting the OSD with the Remote C ontrol Buttons Description 1 Open the OSD menu. 2 Select from Input , Picture , Sound , Setup or Multi Contr ol in the displayed OSD menu screen. 3 Change settings as desired. 4 F inish setting. 5 Close the onscreen display (OSD) menu . Remote Con trol Reception Range 7m ~ 10m 30˚ 30˚ Use the remote contr ol[...]

23 C onnec tion Using an IR Ster eo Cable (sold separat ely) T urn off the device before connecting the External Sensor K it. After it is connected, turn on the device. Con trolling more than one display pr oduct using your r emote contr ol • Connect the IR OUT por t on the product to the C ONTROL IN por t on the other display product using the d[...]

24 Befor e Installing the Product (Installation Guide) 15 ˚ ― T o pr event injur y , this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. - Ensure that an authorized installation company installs the wall mount. - Other wise, it may fall and cause personal injur y . - Make sure to install t[...]

25 A B C E F igure 1.3 Side view D D F igure 1.2 Side view Installation on an Indented W all ― Contact Samsung Customer Service Center for further details. Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ― When installing the product on an indented wall, allow at least the space speci[...]

26 Installing the W all Mount Installing the W all Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. F or detailed information on installing the wall mount, see the instructions provided with the wall mount. We r ecommend you contact a technician for assistance when installing the wall mount bracket. Samsun[...]

27 W all M ount Kit Specications ( VESA) ― Install your wall mount on a solid wall perpendicular to the floor . Before attaching the wall mount t o sur faces other than plaster board, please contact your nearest dealer for additional inf ormation. If you install the product on a slanted wall, it may fall and result in sev ere personal injur y [...]

28 Remote C ontr ol (RS232C ) Cable C onnection RS232C Cable Interface RS232C (9 pins) Pin T xD (No.2), RxD (No .3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow c ontrol None Maximum length 15 m (only shielded type) • Pin assig nment 1 2 3 4 5 6 7 8 9 Pin Signal 1 Detect data carrier 2 Received data 3 T ransmitted[...]

29 • RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 1 5 9 6 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- F emale Rx Tx Gnd 2 3 5 --------> <-------- ---------- 3 2 5 Tx Rx Gnd STEREO PL UG (3.5ø) LAN Cable • Pin assig nment 12345678 Pin No Standard C olour Signal 1 White and orange T X+ 2 Orange T X- 3 White and green RX+ 4 Blue NC 5 White a[...]

30 • Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 RJ45 MDC HUB P1 P1 P2 P2 Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ T X- 2 <--------> 2 T X- RX+ 3 <--------> 3 RX+ R X- 6 <--------> 6 RX- Cross LAN cable (PC to PC) RJ45 P1 P2 Signal P1 P2 Signal TX+ 1 <--------> 3 RX+ T X- 2 <--------> 6 R X- RX+ 3 <[...]

31 C onnec tion • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 RJ45 RJ45 • Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT[...]

32 C ontrol C odes V iewing control sta te (Get c ontrol command) Header Command ID Data length Checksum 0xAA Command type 0 Con trolling (Set control c ommand) Header Command ID Data length Data Checksum 0xAA Command type 1 Value Command N o. Command type Command V alue range 1 Po wer control 0x11 0~1 2 Volume contr ol 0x12 0~100 3 Input source co[...]

33 P ower c ontrol • F unction A product can be powered on and off using a PC. • Viewing power state ( Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command ID Data length Data Checksum 0xAA 0x11 1 "Power" "Po wer": Pow er code to be set on [...]

34 Input source c ontrol • F unction The input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command ID Data length Data Checksum 0xAA 0x14 1 "I nput Source" "Input Sour[...]

35 Screen mode contr ol • F unction The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the V ideo W all function is enabled. ― This control can only be used on models that include a T V . • Viewing screen status (Get Screen Mode Status) Header Command ID Data length Checksum 0xAA 0x18 0 • Setting t[...]

36 PIP On/Off control • F unction The PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if V ideo W all is set to On . ― This function is not available in MagicInfo . • Viewing PIP on/off state (Get the PIP ON / OFF Status) Header Command ID Dat[...]

37 V ideo W all Mode Con trol • F unction Video W all mode can be activated on a product using a PC. This control is only available on a pr oduct whose V ideo W all is enabled. • Viewing video wall mode (Get Video Wall Mode) Header Command ID Data length Checksum 0xAA 0x5C 0 • Setting the video wall (Set V ideo W all Mode) Header Command ID D[...]

38 V ideo W all On • F unction T urn V ideo W all on or off on the product from your comput er . • Get Video W all On/O ff Status Header Command ID Data length Checksum 0xAA 0x84 0 • Set Video W all On/O ff Header Command ID Data length Data Checksum 0xAA 0x84 1 V .Wall_On • V .W all_On: V ideo W all code to be assigned to the pr oduct 1: V[...]

39 10x10 V ideo W all M odel 123456789 10 11 12 13 14 15 O 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 3 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x[...]

40 10x10 V ideo W all Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ... 99 0x63 100 0x64 • Ack Header Command ID Data length A ck/Nak r-CMD V al1 V al2 Checksum 0xAA 0xFF 4 'A' 0x89 Wall_Div W all_SNo • Nak Header Command ID Data length Ack/Nak r-CMD V al1 Checksum 0xAA 0xFF 3 'N' 0x89 ERR "ERR": A code show[...]

41 C onnec ting and Using a Sour ce De vice Chapter 03 Befor e Connecting Check the following bef ore you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders, speakers, set t op boxes and DVD/Blu-ray Disc players. Pr e - connec tion Checkpoints ― Before connecting a source device , read t[...]

42 C onnec ting to a PC • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. ― Connecting par ts may differ in diff erent products. C onnec t[...]

43 C onnec tion using a DVI cable (Digital type) DVI IN RGB / DVI / HDMI / A V / C OMPONENT / A UDIO IN C onnec tion Using an HDMI-DVI C able ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. HDMI IN 1, HDMI IN 2 RGB / DVI / HDMI / A V / C OMPONENT / A UDIO [...]

44 C onnec tion Using an HDMI Cable HDMI IN 1, HDMI IN 2[...]

45 Changing the Resolution ― Adjust the resolution and r efresh rate in Control P anel on your PC to obtain optimum picture quality . ― The picture quality of TFT -L CDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windo ws XP Go to Contr ol Panel Display Settings , and change the resolution. Changing the Re[...]

46 Changing the Resolution on Windo ws 7 Go to Contr ol Panel Display Screen Resolution , and change the resolution. Changing the Resolution on Windows 8 Go to Settings Control P anel Display Screen Resolution , and change the resolution.[...]

47 C onnec ting to a V ideo Device • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • Y ou can connect a video device to the product using a cable. ― Connecting par ts may differ in diff erent products. ― Pr ess the SOURCE button on the remote c[...]

48 C onnec tion Using the componen t Cable A V / COMPONENT IN RGB / DVI / HDMI / A V / COMPONENT / AUDIO IN C onnec tion Using an HDMI-DVI C able ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. T o r esolve this, additionally connect an audio cable to the audio ports on the product and video de v[...]

49 C onnec tion Using an HDMI Cable Using an HDMI cable or HDMI-DVI C able (up to 1080p) • F or better picture and audio quality, connect to a digital device using an HDMI cable. • An HDMI cable supports digital video and audio signals, and does not require an audio cable . - T o connect the product to a digital device that does not support HDM[...]

50 C onnec ting to an A udio Sy stem ― Connecting par ts may differ in diff erent products. RGB / DVI / HDMI / A V / C OMPONENT / A UDIO OUT[...]

51 C onnec ting the network bo x (Sold separat ely) ― F or details on how to connect to a network box, refer to the user's manual pr ovided with the network box upon purchase. MagicInfo T o use MagicInfo , a network box (sold separat ely) must be connected to the product. ― T o change the MagicInfo settings , run "MagicinfoSetupWizard[...]

52 MagicInfo Setup Wizard - v .1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: Subnet mask: Default gateway: 192 . 168 . 0 . 102 255 . 255 . 255 . 0 192 . 168 . 0 . 1 Obtain DNS server address automatically Use the following DNS server address: Preferred DNS server: Alternate DNS server: 10 .[...]

53 MagicInfo Setup Wizard - v .1.12 Select Screen T ype - step 4 Landscape Portrait < Back(B) Next(N) > Finish Cancel 6 Select a display mode. MagicInfo Setup Wizard - v .1.12 Setup Information 1. Application : MagicInfo Pro [LAN,WAN based version 2. Internet Protocol [TCP/IP] IP : 192.168.0.102 3. Language : English 4. Screen T ype : Landsc[...]

54 I nput Chapter 04 S ou rce L ist MENU m : T Input Source List ENTER Source List Source List Move Enter Return PC ： ---- DVI ： ---- AV ： ---- Component ： ---- HDMI1 ： ---- HDMI2 ： ---- MagicInfo ： ---- TV ： ---- - The displayed image may diff er depending on the model. Use to select PC , HDMI or other external input sources connec[...]

55 T urns the PIP Screen Off / On . • Off / On ― PIP turns off when the L CD Display is switched to an external source. ― If you select , , in Size , P osition and T ransparency will not be activated. ― The PIP function is not available when Video W all is On . ― When external A V devices such as VCRs or DVDs are connected to the L CD Dis[...]

56 S ize PIP PIP Move Enter Return PIP ： On Source ： HDMI 1 Size ： ---- Position ： ---- T ransparency ：투명하게 - The displayed image may diff er depending on the model. Changes the Size of the PIP window . ― Picture > Size will be changed to 16:9 when PIP is On . P osition PIP PIP Move Enter Return PIP ： On Source ： HDMI 1 S[...]

57 Adjusts the T ransparency of PIP windows. • High • Medium • Low • Opaque T ranspar enc y PIP PIP Move Enter Return PIP ： On Source ： HDMI 1 Size ： ---- Position ： ---- T ransparency ：투명하게 Opaque Medium Low High - The displayed image may diff er depending on the model. E dit N ame Edit Name Edit Name Move Enter Return PC[...]

58 S ou rce A uto S witch S ettings S ou rce A uto S wit ch Source AutoSwitch Settings Source AutoSwitch Settings Move Enter Return Source AutoSwitch Primary Source Recovery Primary Source Secondary Source : 　　　　 PC : 　　　 DVI : On : On On Off - The displayed image may diff er depending on the model. - S ource A uto S witch S ettings i[...]

59 P rimar y S o urce Source AutoSwitch Settings Source AutoSwitch Settings Source AutoSwitch Primary Source Recovery Primary Source Secondary Source Move : DVI : : On : On Enter Return - The displayed image may diff er depending on the model. Specify Primary Source for the automatic input sour ce. S econdary S o urce Source AutoSwitch Settings Sou[...]

60 P ic ture PC / DVI / MagicInfo Mode Chapter 05 M ode MENU m : T Picture Mode ENTER Move Enter Return Mode ： 사용자 조정 Custom Color T one ： ---- Color Control Color T emp. Image Lock Auto Adjustment Picture Picture Custom Information Advertisement ▶ More - The displayed image may diff er depending on the model. The L CD Display has f[...]

61 C ustom Move Enter Return Contrast Brightness Sharpness Gamma : 90 90 50 Custom Custom Natural Mode1 Mode2 Mode3 - The displayed image may diff er depending on the model. By using the on-screen menus, the contrast and brightness can be changed to your personal pr eference. ― By adjusting the picture using the Custom function, Mode will change [...]

62 C olor T one Move Enter Return Mode : Custom Custom Color T one : 16:9 Color Control Color T emp. : 16:9 Image Lock : 동작 Auto Adjustment : 일반 Picture Picture Off Normal Cool W arm Custom ▶ More - The displayed image may diff er depending on the model. The Color tones can be changed. ― Not available when Dynamic Contrast is set t o On[...]

63 C olor T emp . Color T emp. 10000K - The displayed image may diff er depending on the model. Color T emp . is a measure of the ' warmth' of the image Colors. ― This function is enabled when Mode is set to Custom , and Dynamic Contr ast and Color T one are Off . I mage L ock Move Enter Return Coarse Fine Position 2200 55 ▶ Image Loc[...]

64 A uto A djustment Auto Adjustment Please wait. i - The displayed image may diff er depending on the model. - Available in PC mode only . The values of Fine , C oarse , Position ar e adjusted automatically . By changing the resolution in the control panel , the auto function is per formed. S ig nal B alanc e Move Enter Return Signal Balance : 사[...]

65 S ize Move Enter Return Signal Balance Size : HDMI Black Level : 일반 PIP Picture Dynamic Contrast : Off Lamp Control : 100 Brightness Sensor Picture Reset Picture Picture ▶ More 16:9 4:3 Original Ratio - The displayed image may diff er depending on the model. The Size can be switched . • 16:9 / 4:3 / Original Ratio HDMI B lack L e ve l Mo[...]

66 PIP P ic ture Move Enter Return Contrast Brightness Sharpness Color T int G 50 R 100 45 76 60 50 PIP Picture PIP Picture - The displayed image may diff er depending on the model. Adjusts the PIP Screen Settings. ― Available Modes: PIP On • Contr ast Adjusts the Contrast of the PIP window on the scr een. • Brightness Adjusts the Brightness [...]

67 L amp C ontr ol Lamp Control 100 - The displayed image may diff er depending on the model. Adjusts the inverter lamp in order to r educe energy consumption. ― Not available when Dynamic Contrast is set t o On . B righ tness S ensor Move Enter Return Brightness Sensor Brightness Sensor On Off - The displayed image may diff er depending on the m[...]

68 P ic ture R eset Reset picture settings? i Ye s No - The displayed image may diff er depending on the model. Reset the screen settings.[...]

69 P ic ture AV / HDMI / TV / Component Mode Chapter 06 M ode MENU m : T Picture Mode ENTER Move Enter Return Mode : 16:9 Custom Color T one : 16:9 Color T emp. Size : 16:9 Digital NR : On HDMI Black Level : Normal Picture Picture Dynamic Custom Standard Movie ▶ More - The displayed image may diff er depending on the model. The L CD Display has f[...]

70 C ustom Move Enter Return Contrast Brightness Sharpness Color T int G 50 R 50 50 50 50 50 Custom Custom - The displayed image may diff er depending on the model. By using the on-screen menus, the contrast and brightness can be changed to your personal pr eference. ― Not available when Dynamic Contrast is set t o On . Con trast Adjusts the Cont[...]

71 C olor T one Move Enter Return Mode : Custom Custom Color T one : 16:9 Color T emp. Size : 16:9 Digital NR : 동작 HDMI Black Level : 일반 Picture Picture Off Cool1 Cool2 Normal W arm1 W arm2 ▶ More - The displayed image may diff er depending on the model. The Color tones can be changed. The individual Color components are also user adjusta[...]

72 S ize Move Enter Return 16:9 Zoom1 Zoom2 4:3 Screen Fit Custom ▶ ▶ ▶ ▶ Size Size - The displayed image may diff er depending on the model. The Size can be switched . • 16:9 Sets the picture to 16:9 wide mode. • Zoom1 Magnifies the size of the picture on the screen. • Zoom2 Magnifies the size of the picture more than Z oom1 . • 4:[...]

73 HDMI B lack L e ve l Move Enter Return Mode : Custom Custom Color T one : Normal Color T emp. Size : 16:9 Digital NR : On HDMI Black Level : Picture Picture Normal Low ▶ More - The displayed image may diff er depending on the model. When a DVD or set-top box is connected to your pr oduct via HDMI or D VI port, it may cause a degradation in the[...]

74 PIP P ic ture Move Enter Return Contrast Brightness Sharpness 50 50 50 PIP Picture PIP Picture - The displayed image may diff er depending on the model. Adjusts the PIP Screen Settings. • Contr ast Adjusts the Contrast of the PIP window on the scr een. • Brightness Adjusts the Brightness of the PIP window on the screen. • Sharpness Adjusts[...]

75 L amp C ontr ol Lamp Control 100 - The displayed image may diff er depending on the model. Adjusts the inverter lamp in order to r educe energy consumption. ― Not available when Dynamic Contrast is set t o On . B righ tness S ensor Move Enter Return Brightness Sensor Brightness Sensor On Off - The displayed image may diff er depending on the m[...]

76 P ic ture R eset Reset picture settings? i Ye s No - The displayed image may diff er depending on the model. Reset the screen settings.[...]

77 S ound Chapter 07 M ode MENU m : T Sound Mode ENTER Move Enter Return Mode : 사용자 조정 Custom Auto V olume : 표준 SRS TS XT : Sound Select : 주화면 Speaker Select : Internal Sound Reset Sound Sound Standard Speech Custom Music Movie - The displayed image may diff er depending on the model. The L CD Display has a built-in high fidelit[...]

78 C ustom Move Enter Return Bass T reble Balance L 50 50 50 R 50 Custom Custom - The displayed image may diff er depending on the model. The sound settings can be adjusted to suit your personal pr eferences. ― Y ou can hear the sound even when sound value is set to 0. ― If you adjust sound using Custom function, Mode will turn to Custom mode .[...]

79 SRS TS XT Sound Sound Move Enter Return Mode ： Custom Auto V olume ： SRS TS XT ： Sound Select Speaker Select ： Sound Reset Custom On Off Off Internal - The displayed image may diff er depending on the model. SRS TS XT is a patented SRS technology that solves the pr oblem of playing 5.1 multichannel content over two speakers. T ruSurround[...]

80 S peak er S elect Move Enter Return Mode : Custom Custom Auto V olume : Off SRS TS XT : Sound Select : Main Speaker Select : 내부 Sound Reset Sound Sound Internal External On - The displayed image may diff er depending on the model. When you use the product with it connecting to a Home Theater , turn the internal speakers off so you can listen[...]

81 S etup Chapter 08 L anguage MENU m : T Setup Language ENTER Move Enter Return Language : 한국어 T ime Menu T ransparency : 투명하게 Safety Lock Energy Saving : 해제 Video W all Safety Screen Setup Setup ▶ More English Deutsch Español Français Italiano Svenska Русский Português - The displayed image may diff er depending on t[...]

82 T ime Move Enter Return Clock Set 　 Sleep T imer Timer1 Timer2 Timer3 Holiday Management T ime T ime : Off 　　　　　　▶ : Off 　　　　　　▶ : Off 　　　　　　▶ 　　 　　　　 　▶ 10:04 am 　　　 ▶ : Off 　　　　　　▶ - The displayed image may diff er depending on the model. Selects from one of 4 ti[...]

83 M enu T r ansparency Move Enter Return Language : English Time Menu Transparency : 투명하게 Safety Lock Energy Saving : 해제 Video W all Safety Screen Setup Setup ▶ More Opaque High Medium Low - The displayed image may diff er depending on the model. Change the transparency of the background of the OSD . • High / Medium / Low / O paque[...]

84 E ner gy S a ving Move Enter Return Language : English Time Menu Transparency : High Safety Lock Energy Saving : 해제 Video W all Safety Screen Setup Setup ▶ More Off On - The displayed image may diff er depending on the model. This featur e adjusts the power consumption of the unit in order to save ener gy. • Off / On A Video W all is a s[...]

85 F ormat Move Enter Return Video W all 　　　　　 　 Format Horizontal 　　　　　　　　 V ertical 　　　　　　　　 Screen Position Video W all Video W all 　 : On 　 : Full 　 ▶ 　 : 1 　 : 1 　 　　▶ 　　▶ 　　▶ 　　▶ - The displayed image may diff er depending on the model. The F ormat can be select[...]

86 V er tical Move Enter Return Video W all 　　　　　 　 Format Horizontal 　　　　　　　　 V ertical 　　　　　　　　 Screen Position Video W all Video W all 　 : On 　　 　　 ▶ ▶ ▶ ▶ 　 : Full 　 　 　 : 1 　 　 　 : 1 　 　　 　　 　　　　　　▶ - The displayed image may diff er depending on[...]

87 S af ety S creen P ixel S hift Move Enter Return Pixel Shift 　　　　　 　 Horizontal V ertical 　　　　　　　　 Time 　　　　　　　　 Pixel Shift Pixel Shift 　 : On 　　 　 ▶ ▶ ▶ ▶ 　 : 4 　 　 　 　 : 4 　 　 　 　 : 4 min 　　 - The displayed image may diff er depending on the model. Pix el Shift [...]

88 T imer Move Enter Return T imer 　　　　　 　 Mode Period 　　　　　　　　 Time 　　　　　　　　 T imer T imer 　 : On 　　 　　 　 : Bar 　 　 : 4 Hour 　 　 : 4 sec ▶ ▶ ▶ ▶ - The displayed image may diff er depending on the model. Timer Y ou can set the timer for Scr een Burn Protection. If you start the[...]

89 E raser - The displayed image may diff er depending on the model. This function prevents after-images on the screen b y moving a rectangular pattern. P ixel - The displayed image may diff er depending on the model. This function prevents after-images by moving man y pixels on the screen.[...]

90 S ide G ray Move Enter Return Pixel Shift Timer Bar Eraser Pixel Side Gray : Light Dark Off Safety Screen Safety Screen - The displayed image may diff er depending on the model. Select the brightness of the grey for the screen background . • Off / Light / Dark R esolution S elec t Move Enter Return Setup Setup Resolution Select : 가로 Power [...]

91 P o wer On A djustment Adjust Return Power On Adjustment : 0 Power On Adjustment Power On Adjustment - The displayed image may diff er depending on the model. Adjusts the P ower On time for the scr een. ― Set the Pow er On time to be longer to avoid overvoltage. OSD R otation Move Enter Return Setup Setup Resolution Select : Off Power On Adjus[...]

92 A dvanc ed S ettings Move Enter Return T emperature Auto Power : Off Button Lock : Off User Auto Color Standby Control : Auto Lamp Schedule OSD Display Software Upgrade Advanced Settings Advanced Settings ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ - The displayed image may diff er depending on the model. T emperature Configures the setting f or the T emper[...]

93 B utton L ock Move Enter Return T emperature Auto Power : Off Button Lock : User Auto Color Standby Control : Auto Lamp Schedule OSD Display Software Upgrade Advanced Settings Advanced Settings Off On - The displayed image may diff er depending on the model. Locks or unlocks the monitor contr ol buttons on the product. • Off / On U ser A uto C[...]

94 S tandb y C ontrol Move Enter Return T emperature Auto Power : Off Button Lock : Off User Auto Color Standby Control : 자동설정 Lamp Schedule OSD Display Software Upgrade Advanced Settings Advanced Settings Off On Auto - The displayed image may diff er depending on the model. Sets the standby mode, which will be activated when no input signa[...]

95 OSD D ispla y Move Enter Return Source OSD 　　　　　 　 Not Optimum Mode OSD No Signal OSD 　　　　　　　　 MDC OSD 　　　　　　　　 OSD Display OSD Display 　 : On 　　 　 　▶ 　 : On 　　 　 　▶ 　 : On 　　 　　▶ 　 : On 　　 　　▶ - The displayed image may diff er depending on the model. Dis[...]

96 S oft ware U pgrade - When there are two or more BMP images , they are displayed on the screen using a slideshow . - It is recommended that the playback interval bet ween two BMP images in the slideshow should be one second. The image extraction probability will decrease with other playback intervals. - A BMP image might not be extracted if it i[...]

97 S etup R eset Reset settings in setup? i Ye s No - The displayed image may diff er depending on the model. Reset all the values for a setting. R eset A ll All Settings return to default settings. i Ye s No - The displayed image may diff er depending on the model. Reset all the settings for the display .[...]

98 U sing MDC Chapter 09 MDC (Multiple Display Control) is an application that allows you t o easily control multiple display devices simultaneously using a PC. M ulti C ontr ol MENU m : T Multi Control ENTER Multi Control Multi Control Move Enter Return ID Setup : 00 ID Input : -- MDC Connection : RJ45 MDC Network Setting - The displayed image may[...]

99 MDC Pr ogr am Installation/Uninstallation Installation 1 Inser t the installation CD into the CD-ROM dr ive. 2 Click the MDC Unified installation program. 3 Select a language for installation. Next, click " OK ". 4 When the " W elcome to the InstallShield Wizar d for MDC_Unified " screen appears, click " Next ". 5 I[...]

100 Wha t is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. C onnec ting to MDC Using MDC via RS-232C (serial data communica tions standards) An RS-232C serial cable must be connected to the serial por ts on the PC and monitor . RS232C IN / OUT Mo[...]

101 Using MDC via Ethernet Enter the IP for the primary display device and connect the de vice to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 MDC por t on the product and the LAN por ts on the HUB. RJ45 MDC HUB Monitor 2 Mo[...]

102 Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT por t on the product. RS232C OUT RJ45 MDC Monitor 2 Monitor 1 RS232C IN RS232C IN RS232C OUT Computer[...]

103 C onnec tion Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MA C, and Connection Type), connection status, Set ID Range , and detected devices. Each connection can contain a[...]

104 U ser L ogin Launching the program displays the user log in window. The initial login ID ( Username : admin ) and passw ord ( password : admin ) ar e set to admin . ― After logging in for the first time , make sure to change the password to ensur e securit y . ― T o change the passw ord, go to Home > User Settings . After you are logged [...]

105 A uto S et ID Auto Set ID f eature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 t o 99, and then finally to Set ID 0. ― ID for the last 100th LFD is set to 0.[...]

106 Cloning Using the Cloning featur e, you can copy the setting of one LFD and apply it to multiple selected LFDs. Y ou can select specific tab categories or all tab categories for cloning, using the cop y setting option window. ― T o delete the settings y ou have configured, click the P aste Settings button.[...]

107 C ommand Retr y This featur e is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply fr om an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value is 1.[...]

108 Getting Star ted with MDC 1 T o start the program, click Start Programs Samsung MDC Unified . The login window appears after the MDC prog ram is launched. Enter the user ID and password . • The default user ID and password ar e admin . • Make sure to change the password after the first login. 2 Click Add to add a display device. SET ID Rang[...]

109 Main Screen Lay out 4 3 2 1 6 5 1 Menu Bar Change the status of a display device or the properties of the program. 2 Device Cat egor y View a list of connected display devices or device groups . 3 Schedule Category View a list of schedules for display devices . 4 Set List Select the display device you want to adjust. 5 Modify the Set List Add, [...]

110 V olume 1 2 3 ― The volume can be changed or the sound can be muted only f or displays that are turned on. V olume • Adjust the volume of a selected display . • The volume can be adjusted using the slider bar in the range of 0 to 100. Mute • Enable or disable Mute for a selected display . Mute will automatically be disabled if V olume i[...]

111 User L ogin User Settings • Add, delete or edit log in information. Logout • Log out fr om the current user account as follows. • Click Logout . The message " Do you w ant to log admin out? " is displayed • Click Ye s . The user login window appears. • If you do not want to log in, click Close . The program is closed . ― I[...]

112 Color - Color and T int (G/R) are not available if the input sour ce is PC . - C olor , T int ( G/ R) , C olor T one and C olor T emp . are not a vailable if both PC S ource and V ideo S ource are selected. Color • Adjust the colors for the selected display device . Tint ( G/R) • Adjust the tint for the selected display device . Color T one[...]

113 MPEG Noise Filt er Reduces MPEG noise to provide impr oved picture quality. • Off / Low / M edium / High / Auto Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bott om areas of the video image to provide a mor e immersive viewing experience. • Off : Turns off the Ci[...]

114 Adv anced fea tures 3D Con trol 3D M ode Select the 3D input format. 3D L/ R C hange Swap the left and right pictures. 3D 2D Displays the image for the left eye only . 3D A uto V iew If you set 3D Auto V iew to Message Notice , a pop up message window appears when the product receives a 3D signal . 3D O ptimiza tion The overall adjustment of 3D[...]

115 Advanc ed Settings D ynamic C ontrast Adjust the screen contrast. G amma C ontrol Adjust the primary color intensit y . RGB O nly M ode Displays the Red , Green and Blue color for making fine adjustments to the hue and saturation. F lesh T one Emphasize pink “Flesh T one. ” M otion L ighting Reduces power consumption by reducing scr een bri[...]

116 Sound Adjustment - The Bass or T reble item will be disabled if the item is not supported by the selected set. Y ou can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. B ass • Adjust the bass for the selected display . T reble • Adjust the treble f or the selected display. B alance (L/ R) ?[...]

117 F ormat • Select the format to display the split screen. Full Natural H • Select the number of horizontal display devices. • A maximum of 15 displays can be arranged in a row . ― A maximum of 6 can be assigned to V if 15 is assigned t o H . V • Select the number of ver tical display devices. • A maximum of 15 displays can be arrange[...]

118 General User A uto Color • Automatically adjust the screen colors . ― Available only in PC mode. Auto P ower • Set the product to automatically power on. Standby C ontrol • Set the standby mode to activate if an input source is not detected. F an & T empera ture Configure the settings r equired to detect the fan speed and internal t[...]

119 Security Safety Lock • Lock the on-scr een menus. ― T o unlock the menus , set Safety Lock to Off . Button Lock • Lock the buttons on the displa y device. ― T o unlock the buttons , set Button Lock to Off . OSD Display Source OSD • Select whether to display a message when the So urce is changed. Not Optimum Mode OSD • Select whether[...]

120 Time C lock S et Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer O n T imer • Repeat : Specify the period for which you want to r epeat the selected Timer . Once , EveryDay , Mon~F ri , Mon~Sat , Sat~Sun , Manual • Ho[...]

121 Holiday Management Holiday Management allows you t o prevent devices that are set to be power ed on by the Timer from turning on at a specified date. ― The Holiday Management function can be enabled or disabled in the Timer settings menu . • Add : Y ou can specify holidays. Click the Add button in the Holiday Management window . • Delete [...]

122 S creen S aver ― Period (Hour) and T ime (Sec) can be configured when Repeat is selected. ― Start Time and End Time can be configur ed when I nter val is selected. This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Timer : Y ou can set the timer for Screen Saver [...]

123 S afety S creen The Saf ety Screen func tion can be used to prevent scr een burn-in when a stationar y image displays on the screen of a display device for an extended period of time. L amp C ontrol Lamp Con trol is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a s[...]

124 Tick er Input tex t while a video or image is displayed and display the t ex t on the screen. Ticker Enable or disable Ticker . • Off / On Message Enter a message to display on the scr een. Timer Set the Start Time and End Time to display a message ( Message ). Position Select an orientation to display a message ( Message ) from Horizontal an[...]

125 T ool Settings Security • Panel C ontrol : T urn on or off the screen of a display device. • Remote Contr ol : Enable or disable the remote control. Reset • Reset Picture : Reset the screen settings. • Reset Sound : Reset the sound settings. • Reset System : Reset the syst em settings. • Reset All : Reset the screen, sound and syste[...]

126 Edit C olumn O ptions Configure the settings f or the items that will be displayed on the list of displays. • Language : Select a language to use in the MDC program. After selecting a language, restart the MDC program to use the selected language. • Command Retry Count : Specify the number of retry attempts when a command fails. • Error S[...]

127 M onitor W indow A window appears showing details f or data transfer between the computer and display devices. • Filt er View the program inf ormation. I nformation[...]

128 Other F unc tions Resizing a Window Place the mouse pointer on a corner of the program windo w. An arro w will appear . Move the arrow to customiz e the size of the program window .[...]

129 Group Management Creating Gr oups Create gr oups and manage the list of sets on a group basis. ― Duplicate group names cannot be used . 1 Right-click and selec t Group Edit in the display device list section on the left side of the program window . - The Add on the same lev el button is enabled only if at least one group is created . 2 In the[...]

130 • Add on the sub lev el : Create a sub- group under the selected gr oup. 3 Enter the group name . Deleting Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Delet e . 3 Click Ye s . The group will be deleted .[...]

131 Renaming Groups Rename 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Rename . 3 If a cursor appears in the old group name, enter a new gr oup name. Schedule Management Creating Schedules Create and r egister a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of t[...]

132 2 Click the Add button. The Add Schedule window will appear . 3 Click Add below the Device Group item, and select the group you want to add a schedule t o. 4 Select Date&Time / Action and click OK . The schedule will be added and a list of schedules will appear in the set list window . - Device Group : Select a group . - Date&T ime Inst[...]

133 T roubleshooting Guide - This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted fr om nearby electronic devices. Issue Solution The display y ou want to contr ol does not appear on the system inf ormation char t. 1 Check the connection of the RS232C cable (check that the[...]

134 How display pr oper ties are shown when multiple displa ys are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displa yed. 3 When two displays are selected (e.g . in sequence of ID 1 and ID 3): The settings for ID 1 are display ed before the settings f or [...]

135 T roubleshooting Guide Chapter 10 Requirements Bef ore C ontacting S amsung C ustomer Ser vice C enter Before calling Samsung Cust omer Ser vice Center , test your product as f ollows. If the problem persists, contact Samsung Customer Service Center . T esting the Pr oduc t Check if your product is operating normally by using the product test f[...]

136 Check the follo wings. Installation issue (PC mode) The screen keeps swit ching on and o. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are f ound on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the scr een [...]

137 Screen issue The screen appears unstable and shaky . Check that the resolution and frequency of the PC and graphics card ar e set within a range compatible with the product. Then, change the screen settings if requir ed by referring to the Additional Information on the product menu and the Standard Signal Mode T able . There ar e shadows or gho[...]

138 Remote contr ol issue The remote c ontrol does not work. Make sure that the batteries are correctly in place (+/-). Check if the batteries are flat. Check for power failur e. Make sure that the power cord is connected. Check for any special lighting or neon sig ns switched on in the vicinity. Source devic e issue A beeping sound is heard when m[...]

139 Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to C ontrol P anel Appearance and Themes Display Settings Advanc ed Monitor and adjust the frequency in Monitor Settings . • Windows ME/2000: Go to C ontrol Panel Display Settings Advanced Monitor and adjust the frequency in M[...]

140 Question Answer How do I set pow ersaving mode? • Windows XP: Set pow er-saving mode in Contr ol Panel Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power -saving mode in Control P anel Display S creen Saver Settings or BIOS SE TUP on the PC. • Windows Vista: Set power -saving mode in [...]

141 Specications Chapter 11 1 Size 2 Display area H V 3 Dimensions ( W x H x D) W D H General Model Name LE32C LE46C LE55C Panel Siz e 32 Class (32 inches / 80.5 cm) 46 Class (45.9 inches / 116 cm) 55 Class (54.6 inches / 138 cm) Display area 698.4 mm (H) x 392.85 mm ( V ) 27.5 inches (H) x 15.5 inches ( V ) 1018.08 mm (H) x 572.67 mm ( V ) 40.1[...]

142 Model Name LE32C LE46C LE55C Resolution Optimum resolution 1920 x 1080 @ 60 Hz Maximum resolution 1920 x 1080 @ 60 Hz Po wer Supply This product uses 100 to 240V . Refer to the label at the back of the product as the standard v oltage can var y in different countries. Signal connectors Input PC, DVI, A V , Component, HDMI1, HDMI2, Audio In, RJ4[...]

143 [Recommendation] - EU Only • Hereby , Samsung Electronics, declar es that this Monitor is in compliance with the essential requirements and other relevant provisions of Dir ective 1999/5/EC. • The official Declaration of Conformity may be found at http://www .samsung.com, go to Support > Search Product Support and enter the model name. ?[...]

144 P o werSav er The power-sa ving function of this product reduces power consumption by switching off the screen and changing the color of the po wer LED if the product is not used for a specified period of time. The pow er is not turned off in power-saving mode. T o switch the screen back on, press any key on the keyboard or move the mouse. P ow[...]

145 LE55C P owerSav er Normal Operation P ower sa ving mode Pow er o (P ower Button o ) Rating T ypical W ithout PIM With PIM Po wer Indicator On (Green) Blinking On (Orange) Po wer Consumption 140 W 200 W 123 W Lower than 0.5 W Low er than 0.5 W ― The displayed pow er consumption level can var y in different operating conditions or when se[...]

146 Pr eset T iming M odes ― This product can be set to only one resolution f or each screen size to obtain the optimum picture quality due to the nature of the panel . Using a resolution other than the specified resolution ma y degrade the picture quality. T o av oid this, it is recommended that you select the optimum resolution specified f or y[...]

147 Resolution Horizontal F requency (kHz) V ertical Frequency (Hz) Pix el Clock (MHz) Sync P olarity (H/V ) VESA, 1024 x 768 60,023 75,029 78,750 +/+ VESA, 1152 x 864 67,500 75,000 108,000 +/+ MAC, 1152 x 870 68,681 75,062 100,000 -/- VESA, 1280 x 720 45,000 60,000 74,250 +/+ VESA, 1280 x 800 49,702 59,810 83,500 -/+ VESA, 1280 x 1024 63,981 60,02[...]

148 Appendix Chapter 12 C ontac t SAMSUNG WORLD WIDE ― If you have any questions or comments relating t o Samsung products, please contact the SAMSUNG customer care center . NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung .com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung .com/ca (English) http://www.samsung .com/ca_fr (Fr en[...]

149 LA TIN AMERICA COST A RICA 0-800-507-7267 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) DOMINICA 1-800-751-2676 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) ECU ADOR 1-800-10-7267 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) EL SAL V[...]

150 EUROPE A USTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung .com BEL GIUM 02-201-24-18 http://www.samsung .com/be (Dutch) http://www.samsung .com/be_fr (Fr ench) BOSNIA 05 133 1999 http://www.samsung .com BUL GARIA 07001 33 11, normal tariff http://www.samsung .com CROA TIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CYPRUS [...]

151 EUROPE IT ALIA 800-SAMSUNG (726-7864) http://www.samsung .com LA T VIA 8000-7267 http://www.samsung .com LITHU ANIA 8-800-77777 http://www.samsung .com L UXEMBURG 261 03 710 http://www.samsung .com MONTENEGRO 020 405 888 http://www.samsung .com NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) http://www.samsung .com NORW A Y 815 56480 htt[...]

152 CIS ARMENIA 0-800-05-555 http://www.samsung .com AZERBAIJAN 088-55-55-555 http://www.samsung .com BELARUS 810-800-500-55-500 http://www.samsung .com GEORGIA 0-800-555-555 http://www.samsung .com KAZAKHST AN 8-10-800-500-55-500 (GSM: 7799) http://www.samsung .com KYRGYZST AN 00-800-500-55-500 http://www.samsung .com MOLDOV A 0-800-614-40 http://[...]

153 ASIA P A CIFIC INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 http://www.samsung .com INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung .com JAP AN 0120-327-527 http://www.samsung .com MALA YSIA 1800-88-9999 http://www.samsung .com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung .com PHILIPPINES 1-800-10-SAMSUNG (72[...]

154 MIDDLE EAST BAHRAIN 8000-4726 http://www.samsung .com/ae (English) http://www.samsung .com/ae_ar (Arabic) EGYPT 08000-726786 http://www.samsung .com IRAN 021-8255 http://www.samsung .com JORDAN 800-22273 065777444 http://www.samsung .com KUW AIT 183-2255 http://ww w .samsung.com/ae (English) http://www.samsung .com/ae_ar (Arabic) MOROCC O 080 1[...]

155 AFRICA GHANA 0800-10077 0302-200077 http://www.samsung .com KENY A 0800 545 545 http://www.samsung .com NAMIBIA 8197267864 http://www.samsung .com NIGERIA 0800-726-7864 http://www.samsung .com SENEGAL 800-00-0077 http://www.samsung .com SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung .com T ANZANIA 0685 88 99 00 http://www.samsung .com [...]

156 Responsibility for the P ay Ser vice ( C ost to C ustomers) ― When the ser vice is requested , in spite of in warranty, we may char ge you for a visit from a service technician in the following cases . Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. • If a ser vice technician gives instruction[...]

157 C orrect D isposal C orrect D isposal of This Pr oduc t ( W aste Elec trical & Elec tronic Equipmen t) (Applicable in countries with separate collection systems) This marking on the product, accessor ies or literature indicates that the pr oduct and its electronic accessories (e.g. char ger , headset, USB cable) should not be disposed of wi[...]

158 Optimum Picture Quality and Afterimage Burn-in Pr even tion Optimum Picture Quality • T o enjoy the optimum picture quality , go to Contr ol Panel on your PC and adjust the r esolution and refresh rate as f ollows. The picture quality of TFT -L CDs may degrade if the optimum resolution is not selected. - Resolution: 1920 x 1080 @ 60 Hz - Vert[...]

159 Pr even tion of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally . Normal operation refers t o a continuously changing video pattern. If the L CD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage differ ence may occur be[...]

160 • Avoid combinations of a t ex t color and background color of contrasting brightness. ― Avoid using g rey as it may contribute to afterimage burn-in. ― Avoid using colors of contrasting brightness (black and white; g rey). FLIGHT TIME OZ348 20:30 : : FLIGHT TIME OZ348 20:30 : : • Regular T ext color Change - Use bright colors of simila[...]

161 License Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of D olby Laboratories. Ⓡ Manufactured under a license from U .S. Patent No ’ s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DT S, the [...]

162 T erminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above ref ers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progr essive), depending on the scanning method. - Scanning Scanning refers to a pr ocess of sending pixels that fo[...]