Samsung G19P Plus инструкция обслуживания

SyncMaster G19PPlus Install drivers Install programs SyncMaster G19P Plus[...]

Model Notational Failure to follow di rections noted by this symbol could resul t in bodily harm or damage to the equipment. Prohibited Important to read and understa nd at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your co[...]

Do not use a damaged or loose plug. z This may cause electric shock or fire. Do not pull the plug out by the wire nor touch th e plug with wet hands. z This may cause electric shock or fire. Use only a pr operly grou nded plug a nd receptac le. z An improper ground may cause electric shock or equipmen t damage. (Class l Equi pment only.) Insert the[...]

Installation Be sure to contact an auth orized Servi ce Center , when installing you r monitor in a location with heavy dust, high or low temperatures, high humidity, and e xposed to chemical substances and wh ere it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause seri ous damage to your monitor . Place you[...]

Keep any heat ing devices away from the power c able. z A melted coating may cause electric shock or fire. Do not install the product in pl aces with poor ve ntilation, for ins tance, a bookshelf, closet, e tc. z Any increase in internal temperature may cause fire. Put down the moni tor carefully. z Failing to do so may damage th e monitor. Do not [...]

a slightly moistened, soft fabric. Do not spray water or detergent directly onto the monitor. z This may cause d amage, electric shock or fire. Use the recomm ended detergen t with a smooth cl oth. If the conne ctor between the plug and the pin is dust y or dirty, clean it properly using a dry cloth. z A dirty connector may cause electric shock or [...]

do not install inside a vehicle. z This may cause a malfunction, electric shock or fire. z In particul ar, avoid op erating the monitor near w ater or outd oors where i t could be expo sed to snow or ra in. If the monitor is dropped or th e casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center . z The moni[...]

Do not insert metal objects such as c hopsticks, wire and gimlet or inflammabl e objects such as p aper and match into the ve nt, headph one port or AV ports or etc . z This may cause electric shock or fi re. If an alien substances or water enters the product, turn the product off, unplug the pow er connector from the wall outlet and contact a the [...]

product un plugged. z Otherwise, this may cause heat emi ssion from the accumulated dirt or degraded in sulation, cau sing electr ic shock or fire. Do not plac e your child ren's fav orite toys or a ny other objects of interest on the product. z Children may try to climb on the pr oduct to retrieve an ob ject. The product could fall , causing [...]

Model Please make su re the followi ng items are in cluded with y our monitor. If any items are missing, co ntact your dealer . Contact a local deale r to bu y o p tional item s. Unpacking Without stand Monito r With Stand Monitor & Sim p le Stand Manual SyncMaster G19PPlus[...]

Quick Setup Gu ide Warranty Car d (Not available in al l locations) User's Guide, Monitor Driver, Natural Color software Cable D-Sub Cable Power Cord Sold se p aratel y DVI Cable Front[...]

MENU / [ ]button Opens the OSD menu. Also use to ex it the OSD menu or return to the previous menu. MagicBright™ [] MagicBright™ is a new feature providing optimum viewing environment dependi ng on the contents of the image you are watching. Curren tly seven different mode s are available: C ustom, Text, Internet, Game, Sport, Mo vie and Dynami[...]

(The configu ration at the b ack of the mo nitor may vary from product to produc t.) POWER IN Connect the power cord for your moni tor to the power port on the back of the monitor. DVI IN Connect the DVI Cable t o the DVI IN port on the ba ck of your monit or. RGB IN Connect the signal cabl e to the 15-pi n, D-sub port on the back of yo ur monitor [...]

Model Connecting the Monitor 1. Connect the power cord for your monitor to the POWER IN on the back of the monitor. Plug the power cord fo r the monitor into a nearby outlet. 2. Use a connection appropriate for your computer. 2-1. Using the D-sub (Analog) connecto r on the video card. Connect the signal cable to the 15-pi n, D-sub port on the back [...]

Using the Stand Monitor Assembl y Monitor an d Bo tt om Foldin g the Base The monitor may be reclin ed -3 to 25 degrees. Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.[...]

A. Monitor B. Mounting interfac e pa d (Sol d sep arately) 1. Turn off your monitor and unplu g its po wer cord. 2. Lay the LCD monitor face-dow n on a flat surf ace with a cush ion beneath it to protect the screen. 3. Remove screws and then remove the stand from the LC D monitor. 4. Align the mounting in te rface pad with the holes i n the rear co[...]

1. Insert the CD into the CD-ROM d rive. 2. Click " Windows ". 3. Choose you r monitor mode l in the mode l list, then click the "OK" button . 4. If you can see following messa ge window, then click the "Continue Anyway" button . Then click the "OK" button. (Microsoft ® Window s ® XP/2000 Ope rating Syst em[...]

1. Insert your Manual CD into your CD-ROM drive. 2. Click (Start) and " Control Panel ". Then, double -click on " Appea rance and Personalization ". 3. Click " Personalization " and then " Display Settings ". 4. Click " Advanced Setti ngs… ". 5. Click " Properties " in the " Monitor[...]

7. Check the " Browse my co mp uter for driver software " checkbox and click " Let me pick from a list of de vice driver s on my compu ter ". 8. Click " Have Disk… " and select the folder (for exampl e, D:Drive) where the driver setup file is located, and click " OK ". 9. Select the model that matches your[...]

Microsoft ® Window s ® XP Operating System 1. Insert the CD into the CD-ROM driver. 2. Click " Start " click " Control Panel " and then click the " Appearance and Themes " Icon. 3. Click " Display " icon and choose the " Settings " tab then click " Advanced . " 4. Click the " Proper[...]

5. Click " Update Drive r. " and select " Install from a list or. " then click " Next " button. 6. Select " Don't search ,I will " then click " Next " and then click " Have disk ". 7. Click the " Browse " button then choose A: (D:Driver) and choose your monitor model in the[...]

This monitor d river is unde r certified MS logo ,and this in stallation doe sn't damage your system.The certified driver will be po sted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the " Close " button then click " OK " button contin ually. 10. Monito r driver installatio n is comple ted. Microsoft ® Win[...]

If you can see the " Digital Signatu re Not Found " window then click the " Yes "button. And click the " Finis h " button then the " Close " button. Microsoft ® Window s ® M illennium Operating System 1. Click " Start ," " Setting " and then " Control Pane l ." 2. Double click [...]

One of the recent problems in usi ng a computer is that the color of the images printed out by a printer or oth er images sca nned by a scann er or a digi tal camera are not the same as th ose shown on the monitor. The Natural Color S/W is the very solution for this problem. It is a color administration system developed by Samsung Electronics in as[...]

Model 1. [MENU/ ] Use this button to open the on -screen menu and exit from the men u scree n or clo se screen adjustment menu. 2. [ ] This button allows y ou to ad just items in the menu. 3. [ ] Press this button to activate a highlighted menu item . 4. [ AUTO ] Press to self-ad just to the in coming PC sign al. The val ues of fine,c oarse and pos[...]

Menu Descripti on AUTO When the ' AUTO ' butto n is pressed, the Au to Adjustment screen appe ars as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coa r se an d position are adjusted automati cally. (Available in ana log mode only) To make th[...]

When p ressin g the MENU button after lockin g the OSD Menu Descripti on Locked This is the function that locks the OSD in order to ke ep the current states of settings or prevent other s from adjusting the current set tings. Lock : Hold down the menu button for more than five seconds to activate the OSD adjustment l ock function. Unlock : Hold dow[...]

MagicBright™ Menu Descripti on MagicBright™ Push the MagicBright bu tto n to circle thro ug h ava il a bl e pre con fi gured modes. - seven different modes (Custom/Text/I nternet/Game/Spo rt/Movie/Dynamic C ontrast) Brightness Menu Descripti on Brightness When OSD is not on the screen, push the butto n to ad jus t brightness.[...]

SOURCE Menu Descripti on SOURCE Selects the video signal whil e the OSD is off. Picture Brightness Contrast Color MagicColor Color Tone Co l or Co nt rol Gamma Image Coarse Fine Sharpness H-Position V-Positi on OSD Language H-Position V-P o sition Transparency Display Time Setup Auto Source Image Reset Color Reset Information Picture : Not availa b[...]

Menu Description Play /Stop Brightness You can use the on-screen me nu s to change the brightness according to perso na l preference. Direct Acce ss Feature : When OSD is not on the s creen, push the [ ] button to adjust brightn ess. [MENU → → → , → MENU] Contrast You can use the on-screen menu s to change the contrast according to personal[...]

Menu Description Play /Stop MagicColor [MENU → , → → → , → MENU] MagicColor is a new techno logy that Samsung has exclusively develope d to improve digital ima ge and to display natural color more clearly without disturbi ng ima ge quality. 1) Off - Returns to the original mode. 2) Demo - The screen before ap ply ing MagicColor appears on[...]

Menu Description Play /Stop Coarse Removes noise such as ve rtical stripes. Coarse adjustment may move the screen image area . You may relocate it to the center usin g the horizontal control menu. (Available in ana log mode only) [MENU → , → → → , → MENU] Fine Removes noise such as horizo ntal stripes. If the noise persists even after fin[...]

Menu Description Play /Stop Languag e You can choose one of 9 languages. Note :The language chose n affects only the langua ge o f the OSD. It has no effect on any software running on the computer. [MENU → , → → → , → MENU] H-Position You can change the horizo ntal position where the OSD menu appears on your monit or. [MENU → , → → [...]

Menu Description Play /Stop Auto Source Select Auto Source for the monitor to automatically select the signal source. [MENU → , → → → , → MENU] Image Reset Image parameters are replaced with the factory d efau lt values. [MENU → , → → , → → , → MENU] Color Reset Color parameters are repl ace d with the factory default values. [...]

Menu Descripti on Informatio n Shows a video source, display mode on the OSD screen. [MENU → , → MENU][...]

Model Check List Before calling for assistance, check the informa tion in th is section to see if you can remedy any proble ms yourself. If yo u do need assistance , please call the phone number on the Information section or contact your de al er . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord[...]

can handle properly. If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode","Recommend ed Mode 1280 x 1024 60 Hz" message is displayed. If th e display exceeds 85 Hz, the display will work properly but the "Not Optimum Mode","Recommend ed Mode 1280 x 1024 60 Hz" message appears for one minute a nd the n d[...]

changed after changing the video card. Settings . Has the video card been set properly? Set the video card by referri ng to the video card manual . There is a message that reads "Unrecog nized monitor, Plug & Play (VESA DDC) monitor found". Have you install ed the monitor driver? Install the monitor driver according to the Drive r Ins[...]

Self-Test Fea ture Check 1. Turn off bo th your computer and the moni tor. 2. Unplug t he video cable f rom the back of the comput er. 3. Turn on the monitor. If the monitor is functioning prop erly, you will see a box in the illustration below. This box appears during normal opera tion if the video cable becomes disconn ected or damag ed. 4. Turn [...]

Model General General Model Name SyncMaster G19PPlus LCD Panel Size 19" Diagonal (48 cm) Display area 376.32 mm (H) x 301.056 mm (V) Pixel Pitch 0.294 mm (H) x 0.294 mm (V) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.2 M(6-bits+FRC) Resolution Optimum resolution 1280x1024@60H z Maximum resolution 1280x1024@75Hz [...]

Dimensions (WxHxD)/ Weight (With Stand) 419.9 X 426. 6 X 210.0 m m / 16.5 x 16.8 x 8.3 inch / 5.6 kg / 12. 3 lbs VESA Mounting Interface 75 x 75 mm Environmen tal consider ations Operating Operating Temperature : 50 °F~ 104 °F ( 10 °C ~ 40 °C) Humidity : 10 % ~ 80%, no n-condensing Storage Storage Temperature : -4 °F~ 113 °F ( -20 °C ~ 45 °[...]

Preset Timing Modes If the signal transferred from the comp uter is t he same as the following Preset Timing Modes, the screen will be adjusted automa tically. However, if the signal diffe rs, the screen may go blank while the power LED is on. Re fer to the video card manual and adjust the screen as follows. Display Mode Horizontal Frequenc y (kHz)[...]

Model Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung pro ducts, please contact the SAMSUNG customer care cent er. North Amer ica U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca MEXICO 01-800-SAMSUNG (7267864 ) http://www.samsung.com/mx Latin America A[...]

BELGIUM 02 201 2418 http://www.samsung.com/be CZECH REPUBLIC 844 000 844 http://www.samsung.com/cz DENMARK 70 70 19 70 http://www.samsung.com/dk FINLAND 030-6227 515 http://www.samsung.com/fi FRANCE 3260 SAMSUNG(726 7864) (€ 0,15/min) http://www.samsung.com/fr GERMANY 01805-SAMSUNG(726 -7864) (€ 0,14/Min) http://www.samsung.de HUNGARY 06-80-SAM[...]

JAPAN 0120-327-527 http://www.samsung.com/jp MALAYSIA 1800-88-9999 http://www.samsung.com/my PHILIPPINES 1800-10- SAMSUNG (7267864) http://www.samsung.com/ph SINGAPORE 1800-SAMSUNG (7267864) http://www.samsung.com/sg THAILAND 1800-29-3232, 02 -689-3232 http://www.samsung.com/th TAIWAN 0800-329-999 http://www.samsung.com/tw VIETNAM 1 800 588 889 htt[...]

For Better Display 1. Adjust computer resolution and screen injection rate (refresh rate) oncomputer as de scribed below to enjoy the best qual ity of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD . { Resolution: 1280 x 1024 { Vertical frequency (refresh rate): 60 Hz 2. TF[...]

PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retentio n wh en switching from one image to anothe r especially after displaying a statio nary image for a long time. This guide is to demonstrate correct usag e of LC D products in order to protect them from Image retention. Warrant y Warranty does not cover an y dama[...]

Ex) The best way to prote ct your monitor from Image retention i s to s et your PC or S y stem to o p erate a Screen Sa ver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is operated un de r normal conditions. Normal conditions are defined as con tinuously changing video patterns. When the LCD panel is opera[...]

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate col lection syst ems) This marking shown on t he product or its literature, indicates that it sho uld not be dispose d with other hous ehold wastes a t the end of it s working li f[...]