Samsung CTI613GI инструкция обслуживания

imagine the possibilities Thank you for purchasing this Samsung pr oduct. T o receive mor e complete service, please register your product at www .samsung.com/global/register Induction Hob user manual CTI613GI series CTI613GI series_EN-00205A_XSA.in1 1 2009-02-25  10:10:28[...]

2 _ using this manual using this manual Please take the time to read this owner’ s manual, paying particular attention to the safety information contained in the following section, before using your appliance. Keep this manual for future reference. If transferring ownership of the appliance, please remember to pass the manual on to the new owner [...]

safety instructions _ 3 SAFETY INSTRUCTIONS safety instructions The safety aspects of this appliance comply with all accepted technical and safety standards. However , as manufacturers we also believe it is our r esponsibility to familiarize you with the following safety instructions. ELECTRICAL SAFETY • Be sure the appliance is pr operly install[...]

4 _ safety instructions SAFETY DURING USE • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • After use, switch off the hob element by its contr ol and do not rely on the pan detector . • The appliance is not intended for use by persons (including children) with r educed [...]

disposal instructions _ 5 DISPOSAL INSTRUCTIONS disposal instructions DISPOSING OF THE P ACKAGING MA TERIAL All materials used to package the appliance are fully r ecyclable. Sheet and hard foam parts are appr opriately marked. Please dispose of packaging materials and old appliances with due regar d to safety and the environment. PROPER DISPOSAL O[...]

6 _ Contents contents INST ALLING THE HOB 7 7 Regulations and compliance 7 Safety instructions for the installer 8 Connecting to the mains power suppl y 9 Installing into the counterto p P ARTS AND FEA TURES 11 11 Cooking zones 11 Control panel 12 Components 12 Induction heating 13 The key features of your appliance 14 Safety shutoff 14 Residual he[...]

installing the hob _ 7 INST ALLING THE HOB installing the hob Important : Be sure the new appliance is installed and gr ounded only by qualified personnel. Please observe this instruction. The warranty will not cover any damage that may occur as a result of impr oper installation. T echnical data is provided at the end of this manual. REGULA TIONS[...]

8 _ installing the hob CONNECTING TO THE MAINS POWER SUPPL Y Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob. Shut off power to cir cuit before connecting wir es to circuit. The[...]

installing the hob _ 9 INST ALLING THE HOB INST ALLING INTO THE COUNTERTOP Make a note of the serial number on the appliance rating plate prior to installation. This number will be requir ed in the case of requests for service and is no longer accessible after installation, as it is on the original rating plate on the underside of the appliance. Pa[...]

10 _ installing the hob = = 90° x 4 ø 2 100 100 490 ±1 CTI613GI series_EN-00205A_XSA.in10 10 2009-02-25  10:10:30[...]

parts and features _ 11 P ARTS AND FEA TURES parts and features COOKING ZONES 1. Induction cooking zone 2200W with Power Boost 3200W 2. Induction cooking zone 1400W with Power Boost 2000W 3. Induction front Bridge zone 1800W with Power Boost 2600W 4. Induction rear Bridge zone 1800W with Power Boost 2600W 5. Induction complete Bridge zone 3600W wit[...]

12 _ parts and features COMPONENTS Induction Hob Installation Brackets Screws INDUCTION HEA TING • The Principle of Induction Heating : When you place your cookware on a cooking zone and you turn it on, the electronic circuits in your induction hob pr oduce “induced currents” in the bottom of the cookwar e which instantly raise cookware’ s [...]

parts and features _ 13 P ARTS AND FEA TURES THE KEY FEA TURES OF YOUR APPLIANCE • Ceramic glass cooking surface : The appliance has a ceramic glass cooking surface and four rapid - response cooking zones. • T ouch control sensors : Y our appliance is operated using touch control sensors. • Easy cleaning : The advantage of the ceramic glass c[...]

14 _ parts and features SAFETY SHUTOFF If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time, that particular cooking zone will automatically switch itself off. Any residual warmth will be indicated with (for “hot”) in the digital displays corresponding to the particular cooking zon[...]

before you begin _ 15 BEFORE YOU BEGIN TEMPERA TURE DETECTION If for any reason the temperatur es on any of the cooking zones were to exceed the safety levels, should this happen then the cooking zone will automatically reduce to a lower power level. When you have finished using the hob, the cooling fan will continue to run until the hob’ s elec[...]

16 _ hob use hob use COOKW ARE FOR INDUCTION COOKING ZONES The induction hob can only be turned on when a cookware with a magnetic base is placed on one of the cooking zones. Y ou can use the following suitable cookware. Cookware material Cookware material Suitable Steel, Enamelled steel Y es Cast iron Y es Stainless steel If appropriately labelled[...]

hob use _ 17 HOB USE USING SUIT ABLE COOKWARE Better pans produce better r esults. • Y ou can recognise good pans by their bases. The base should be as thick and flat as possible. • When buying new pans, pay particular attention to the diameter of the base. Manufacturers often give only the diameter of the upper rim. • Do not use pans which [...]

18 _ hob use SWITCHING THE APPLIANCE ON 1. T ouch the Lock control sensor for approximately 3 seconds. 2. The appliance is switched on using the On/Off control sensor . T ouch the On/Off contr ol sensor for 1 second. The digital displays will show . After the On/Off contr ol sensor has been actuated to switch on your appliance, a heat setting must [...]

hob use _ 19 HOB USE After switching off a single cooking zone or the entir e cooking surface, the presence of r esidual heat will be indicated in the digital displays of the corresponding cooking zones in the form of an (for “hot”). SWITCHING A COOKING ZONE OFF T o switch off a cooking zone, r eturn the setting to by using the control panel’[...]

20 _ hob use TIMER There are two ways to use the timer: Using the timer as a safety shutoff: If a specific time is set for a cooking zone, the cooking zone will shut itself off once this period of time has elapsed. This function can be used for multiple cooking zones simultaneously. Using the timer to count down: The countdown timer cannot be used[...]

hob use _ 21 HOB USE Countdown timer For the countdown timer to be used, the appliance must be switched on but all the cooking zones must be switched off. 1. T ouch the Timer control sensor . will appear in the timer display. 2. Set the desired period of time using the Timer setting selectors ( or ). The countdown timer function is now activated an[...]

22 _ hob use POWER MANAGEMENT The cooking zones have a maximum power available to them. If this power range is exceeded by switching on the power boost function , Power Management automatically reduced the heat setting of pair ed another cooking zone. • Left side : No.1 and No.2 is paired cooking zone • Right side : No.3 and No.4 is paired cook[...]

cleaning and care _ 23 CLEANING AND CARE cleaning and care HOB Important : Cleaning agents must not come into contact with a heated ceramic glass surface: All cleaning agents must be removed with adequate amounts of clean water after cleaning because they can have a caustic effect when the surface becomes hot. Do not use any aggressive cleaners suc[...]

24 _ cleaning and care Problem Dirt 1. Remove burnt-on sugar , melted plastic, aluminium foil or other materials with a glass scraper immediately and while still hot. Important : There is a risk of burning yourself when the glass scraper is used on a hot cooking zone: 2. Clean the hob as normal when it has cooled down. If the cooking zone on which [...]

warranty and service _ 25 WARRANTY AND SER VICE warranty and ser vice F AQS AND TROUBLESHOOTING A fault may result fr om a minor error that you can corr ect yourself with the help of the following instructions. Do not attempt any further repairs if the following instructions do not help in each specific case. W arning : Repairs to the appliance ar[...]

26 _ warranty and service What should I do if the display is illuminated? Check for the following: • The control panel is partially cover ed by a damp cloth or liquid. T o reset, press the “On / Of f” control sensor . What should I do if the display is illuminated? Check for the following: • The hob is overheated because of abnormal operati[...]

technical data _ 27 TECHNICAL DA T A technical data TECHNICAL DA T A Appliance dimensions Width 575 mm Depth 505 mm Height 62 mm Worktop cut - out dimensions Width 560 mm Depth 490 mm Corner radius 3 mm Connection voltage 220 - 240 V ~ 50/60 Hz Maximum connected load power 7.2 kW Weight Net 12.0 kg Gross 14.5 kg COOKING RINGS Position Diameter Powe[...]

Code No.: DG68-00205A CTI613GI series_EN-00205A_XSA.in28 28 2009-02-25  10:10:36[...]