ProForm PCTL69100 инструкция обслуживания

USER'S MANUAL ® CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. PCTL69100 Serial No. Find the serial number in the location shown below. Write the serial num- ber in the space above for reference. www .proform.com Visit our website[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . .[...]

1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described. 3. Place the treadmill on a level surface, with at least 2 m (8 ft.) of clearance behind it and 0.5 m (2 ft.) on each side. Do not place the treadmill on any surface tha[...]

22. When using iFIT.com CDs and videos, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared for speed and/or in- cline changes. In some instances, the speed and/or incline may change before the per- sonal trainer describes the change. [...]

Thank you for selecting the revolutionary PROFORM ® 725FP treadmill. The 725FP treadmill combines ad- vanced technology with innovative design to help you get the most from your exercise program in the conve- nience of your home. And when you’re not exercising, the unique 725FP can be folded up, requiring less than half the floor space of other [...]

1. With the help of a second person, carefully raise the Uprights (82) until the treadmill is in the position shown. 82 1 ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and y[...]

6. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 21). To protect the floor or carpet from damage, place a mat under the treadmill. 101 101 82 103 103 82 97 78 78 85 85 97 4. Slide the upper end of a Handrail (85) an[...]

8 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear. HOW[...]

CONSOLE DIAGRAM Clip Key Displays Displays Manual/Program Indicators Speed Buttons LED Track Note: If there is a thin sheet of clear plastic on the face of the console, remove it. FEATURES OF THE CONSOLE The treadmill console offers an impressive array of features to help you get the most from your exercise. When the manual mode of the console is s[...]

HOW TO TURN ON THE POWER Plug in the power cord (see page 8). Locate the on/off switch on the front of the treadmill near the power cord. Make sure that the on/off switch is in the on position. Stand on the foot rails of the treadmill. Find the clip attached to the key and slide the clip onto the waistband of your clothes. Next, insert the key into[...]

TIME/INCLINE display —When the manual mode or an iFIT.com program is se- lected, this display will show the elapsed time and the incline level of the treadmill. Every seven seconds, the display will change from one number to the other, as shown by the arrows in the dis- play. When a personal trainer program is se- le ct ed , th e display will sho[...]

HOW TO USE PERSONAL TRAINER PROGRAMS Insert the key into the console. See HOW TO TURN ON THE POWER on 10. Select one of the personal trainer programs. When the key is in- serted, the manual mode will be selected. To select one of the personal trainer pro- grams, press the PRO- GRAM button repeat- edly until one of the four personal trainer program [...]

HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFIT.com CDs , the treadmill must be con- nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages 13 and 14 for connecting instructions. To use iFIT.com videocassettes , the treadmill must be con- nected to your VCR. See page 15 fo[...]

14 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the adaptor. Plug the adaptor into the LINE OUT [...]

HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 14. A. Plug one end of the audio cable into the ja[...]

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the SPEED or INCLINE buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program. To stop the walking belt at any time, press the STOP [...]

HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for details. To use programs from our Web site, the treadmill must be connected to your home computer. See HOW T[...]

INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the information mode[...]

HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the treadmill. 1. Hold the tr[...]

TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-936-4266, Monday through Friday, 8h00 until 18h30 Eastern Time (excluding holidays). PROBLEM: The power does [...]

PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the allen wrench, tu[...]

CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with the[...]

P ART LIST—Model No. PCTL69100 R0603A 1 1 Motor Belt 2 1 Pulley/Flywheel/Fan 3 4 Motor Nut 4* 1 Motor/Pulley/ Flywheel/ Fan 5 2 Incline Motor Bolt 6 2 Incline Motor Spacer 7 1 Incline Motor 8 1 Stop Bracket 9 1 Small Nut 10 2 Star Washer 11 1 Optic Switch 12 1 Frame 13 1 Small Bolt 14 1 Incline Optic Disk 15 8 Incline Motor Nut 16 4 Belt Guide Sc[...]

Part No. 196376 R0603A PRINTED IN CANADA © 2003 ICON OF/DU CANADA, INC. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 1-888-936-4266, Monday through Friday, 8h00 until 8h30 Eastern Time (excluding holidays). When ordering parts, please be prepared to give the following information: • Th[...]

EXPLODED DRA WING—Model No. PCTL69100 R0603A 25 101 48 101 17 52 106 101 16 49 24 69 70 45 46 120 41 27 28 29 101 30 100 26 15 8 5 7 6 13 19 101 5 15 35 36 32 33 15 31 38 39 15 76 18 22 21 3 1 3 4* 2 39 40 40 33 43 42 32 45 44 46 44 45 46 41 71 55 44 44 76 47 45 46 47 47 62 53 54 59 60 62 61 64 58 60 59 47 63 57 67 58 76 76 51 10 11 10 14 9 66 65[...]

90 79 79 108 108 107 107 109 121* 97 101 103 100 16 97 101 96 97 101 83 84 84 83 82 94 101 91 99 62 104 86 15 95 72 101 105 101 87 89 89 89 89 88 85 86 95 15 101 34 50 20 34 93 78 108 56 23 80 73 102 102 97 101 103 104 78 108 20 11 6 11 6 77 89 11 0 111 11 4 11 3 11 2 120 11 7 101 101 101 EXPLODED DRA WING—Model No. PCTL69100 R0603A[...]