Phantom Tech VI0508 инструкция обслуживания

Installation Manual for For Right and Left Hinged Doors Durable. Reliable. Attractive. For door openings up to 36” (914 mm) wide and 80 9/16” (2,047 mm) high Quick and Easy to Size and Install[...]

Congratulations and thank you for purchasing V iewpoint! The V iewpoint Screen is designed and manufactured by Seiki Screen Systems, the world’ s largest manufacturer of retractable screens. Phantom Screens, North America’ s leading brand of retractable solutions, is proud to bring you these innovative products. Thanks to rigorous design and pr[...]

Getting to Know the V iewpoint Screen ................ Parts and T ools ...................................................... Measuring the Door Opening ............................... Cutting the Horizontal and V ertical Parts .................................................. Installing the Bottom Rail and Preparing the Screen Housing Assembly .[...]

Getting to Know the V iewpoint Screen Before beginning, become familiar with the V iewpoint Screen and the door on which it will be installed. The V iewpoint Screen accommodates both in-swing and out-swing doors. In-swing doors open to the inside of the home and require the V iewpoint Screen to be installed on the outside of the home. Out-swing doo[...]

Parts and T ools Before beginning, make sure that all these parts are included with the V iewpoint Screen package. Required T ools V iewpoint Screens can be sized and installed using common household tools. Make sure all necessary tools are available before beginning. NOTE : A chop saw can be used in place of a hacksaw provided that a bi-metal blad[...]

Measuring the Door Opening H W The V iewpoint Screen requires a minimum Mounting Surface of 1 3/4" (45 mm). This mounting surface must be at and ush, and at a right angle (90º) to the door . For the Width - Measure the width of the opening between the right and left surfaces of the door frame, record this dimension in the box below labe[...]

- Cutting the Horizontal and V ertical Parts Cutting the Horizontal Parts Calculate the correct cut off Lengths. Cut from each part the cut off length provided by the calculation performed above. Maximum Opening W idth Subtract inside door frame width “W” Enter Cut off Length Below 36” (914 mm) = After cutting any part of the V iewpoint Scree[...]

Installing the Bottom Rail and Preparing the Screen Housing Assembly Remove the backing from the double sided tape on the bottom of the Bottom Rail. Attach the Bottom Rail onto the door sill, placing the front edge of the Bottom Rail even with the face or front edge of the door frame on both sides of the opening. Installing the Bottom Rail Preparin[...]

Installing the Mounting Bracket 1. Remove the backing of the adhesive strip on the back of the Mounting Bracket. 2. Insert the bottom of the Mounting Bracket into the track of the Bottom Rail on the hinge side of the door . 3. Push the Mounting Bracket upwards, ensuring that the top of the Corner Cover is tight against the upper portion of the door[...]

Installing the T op Rail and Catch Frame Installing the T op Rail 1. Remove the backing of the adhesive tape on the top of the T op Rail. 2. Insert the Rollers at the top of the Sliding Bar into the T op Rail, then push the T op Rail into the Corner Cover on the top of the Mounting Bracket. 3. Position the T op Rail along the top of the door frame [...]

Adjusting the Latch and T ension W ires T op R ail Catch F rame Latch Door Frame Push up the top of the Catch F rame all the way into the T op R ail Adjusting the Latch Pull the Sliding Bar over to the Catch Frame and ensure that the Latch can be engaged. If the Latch cannot be engaged, adjust it by following the procedure shown in the diagram. Loo[...]

Attaching the Fixing Strip and Installing the Clips Attach the Fixing Strip Insert one edge of the Fixing Strip into the Mounting Bracket on an angle, beginning at the top, and working toward the bottom. Again from the top, press the other edge of the Fixing Strip into the Mounting Bracket, working it into position all the way to the bottom so that[...]

The V iewpoint Screen is designed and engineered to be maintenance free. The following are some helpful hints to ensure the smooth operation of the V iewpoint Screen for years to come. • All moving components used in the V iewpoint Screen are manufactured from a mixture of nylon and other materials. This combination of compounds is strong, impact[...]

Help Hotline The V iewpoint Screen was designed for easy sizing and installation. This Installation Manual provides a step by step guide through the entire process. If there are any questions during the installation of the V iewpoint Screen, please call toll free: 1-877-446-7180 14[...]

V iewpoint Screen Limited Lifetime/Non-transferable Manufacturer ’ s W arranty The V iewpoint Screen is warranted by Seiki Screen Systems to be free of manufacturer ’ s defects in materials or workmanship, for as long as the original purchaser owns and or resides at that residence and that the product remains at its original point of installati[...]

Designed & Manufactured by Seiki Screen Systems ™ Marketed and Distributed by Phantom Screens ® Seiki Screen Systems Call 1-877-446-7180 Or email: info@seikiscreensystems.com www .seikiscreensystems.com Phantom Mfg. (Int’l) Ltd. Call 1-888-PHANTOM Or email: phantom@phantomscreens.com www .phantomscreens.com © 2008 Phantom Mfg. (Int’l) L[...]