Patton electronic 2312M инструкция обслуживания

USER MANUAL MODEL 2300M SERIES OpticLink Ethernet Media Con verters (2300M, 2310M, 2311M, & 2312M) SALES OFFICE (301) 975-1000 TECHNICAL SUPPOR T (301) 975-1007 P ar t# 07M2300M Doc# 077321U Rev . A Revised 4/14/03 An ISO-9001 Cer tified Company[...]

2 CONTENTS 1.0 Warranty Information ................................................................. 3 1.1 Radio and TV Interference ............................................................ 3 1.2 CE Notice ...................................................................................... 3 1.3 Service ......................................[...]

3 1.0 W ARRANTY INFORMATION P atton Electr onics warrants all Model 2300M Series components to be free from def ects, and will—at our option—repair or replace the product should it f ail within one year from the first date of shipment. This warranty is limited to def ects in w orkmanship or mater ials, and does not cov er customer damage, ab u[...]

4 and the Low V oltage Directive (L VD) of the Union European (EU). A Cer- tificate of Compliance is av ailable by contacting T echnical Suppor t. 1.3 SERVICE All warranty and nonw arranty repairs must be retur ned freight prepaid and insured to P atton Electronics. All retur ns must hav e a Retur n Materi- als A uthorization number on the outside[...]

5 2.0 GENERAL INFORMATION Thank you f or your purchase of this P atton Electronics product. It has been thoroughly inspected and tested and is warranted f or one year f or par ts and labor . If you ha v e any questions about this product, please call P atton Electronics T echnical Support at (301) 975-1007. 2.1 FEATURES • Cost eff ectiv e plug an[...]

6 2.2 DESCRIPTION There are f our base models in the P atton Model 2300M Ser ies of stan- dards compliant Ethernet Media Converters (see T able 1) that conv er t and e xtend the reach of copper Ethernet over multi-mode fiber . • The Model 2300M conv er ts 100Base-TX to 100Base-FX and extends up to 1.24 miles (2.0 km). Note The Model 2300M can be[...]

7 side of the Model 2311M, there must be another 100Base or an auto-sensing 10/100 network device on the other . The Model 2311M is the ideal product f or customers who currently hav e 10Base-T networks and/or equipment and are planning to upgrade to 100Base-TX in the future. The Model 2311 provides a mig ration path from 10Base-T/10Base-FL to 100B[...]

8 3.0 INSTALLATION The f ollowing sections describe installing and configuring the Model 2300M Series of Ether net Media Conv er ters 3.1 INSTALLING A MEDIA CONVERTER Do the f ollowing to install the Model 2300M Series of Ethernet Media Conv er ters: 1. The MDI/MDI-X s witch enables y ou to connect the 2300M models to diff erent types of network d[...]

9 2. The media con verter comes equipped with a shielded RJ-45 Jack f or Ethernet connections (see Figure 1 on page 8). Connect the Ethernet RJ-45 jack to the appropriate 802.3 compliant network equipment via a standard network patch cable (not pro- vided). The pinout diagrams in Figure 2 reflect the pinouts of the Ethernet RJ-45 jack when switche[...]

10 3. Connect the dual fiber ST or SC connectors on the media conv erter (see Figure 3) directly to the 802.3 compliant multi-mode fiber cable equipped with male ST or SC connectors or via 802.3 compliant multi-mode fiber patch cord (not provided) and corresponding ST or SC fiber wall jac ks. Note V er ify that the cable connecting the TX and R[...]

11 3.2 END-TO-END CONNECTION Figure 4 shows an end-to-end connection between a personal computer/ terminal and Ether net hub using two P atton Model 2300M Series Ether- net Media Conv er ters and a multi-mode fiber connection. Figure 4. End-to-end multi-mode fiber connection[...]

12 4.0 OPERATION Once you ha ve installed the Model 2300M Series unit and hav e con- nected the External Po wer Supply Adapter to the appropr iate pow er source, the unit will po wer up automatically and is ready to operate . 4.1 LED INDICATORS Once powered up , LED indicators located on the side of the Model 2300M Series unit will illuminate to in[...]

13 The LED indicators reflect the f ollowing operating status: T able 2: LED indicator descriptions Number Name Description 1 P W R Illuminates green to shown that po wer is applied to unit. 2 FO100 Illuminates green to show that a 100 Mbps signal is present on the fiber optic side of the unit. (Not used on Model 2310M.) 3 FO A CT Blinks yello w [...]

14 APPENDIX A SPECIFICATIONS A.1 INTERFACES/CONNECTORS • T wisted-P air/Copper Ethernet: Shielded RJ-45 Jac k • Fiber Optic Ethernet: Dual ST or SC Connectors A.2 INTERFACE SPEED • 2300M: 100 Mbps • 2310M: 10 Mbps • 2311M: Auto-Negotiating 10 or 100 Mbps • 2312M: Auto-Negotiating 10 or 100 Mbps A.3 T RANSMISSION MODE Full or Half-Duple [...]

15 A.7 FIBER OPTIC LINK BUDGET T ransmit power • 2300M: -16.8 dBm (typical) • 2310M: -12 dBm (typical) • 2311M: -12 dBm (typical) • 2312M: -16.8 dBm (typical) Receiver Sensitivity • 2300M: -33.5 dBm (typical) • 2310M: -28 dBm (typical) • 2311M: -28 dBm (typical) • 2312M: -33.5 dBm (typical) Delay Time • 2300M: 5µs per km (typical[...]

16 A.10 COMPLIANCE • Saf ety & EMC: P atton Internal Safety & EMC T esting, FCC Part 15 Class A • T elecom—CE Mark per EMC directive 89/336/EEC and Low V oltage Directive 73/23/EEC A.11 POWER • External 120 V AC , 60 Hz AC P ower Supply (5 VDC output) • External 220 V AC , 50 Hz AC P ower Supply (5 VDC output) • External UI AC P[...]