Paradyne 6310 MVLt инструкция обслуживания

1 Hotwire r 6310 MVL t Modem Customer Premises Installation Instructions Document Number 6310-A2-GN10-40 February 2000 Contents Hotwire 6310 MVL Modem Overview 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Before Y ou Begin 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Instal[...]

2 Hotwire MVL System Copper pairs run from the central office (CO) to the customer premises (CP) to create the local loop. The local loop terminates on the customer premises at the demarcation point. 98-15930a-02 MVL Modem Customer Premises (CP) MVL/PO TS Ethernet Crossover Cable Ethernet Cable or Central Office (CO) Local Loop Hub MVL – Multiple[...]

3 NOTES: In this document: — A telephone is used to represent any equipment that plugs into a phone jack and uses the POTS line, such as a phone, modem, or fax machine. — End-user system is used to represent any PC with an Ethernet connection and MVL-based service. — Service provider is used to represent any Internet Service Provider (ISP) or[...]

4 Product-Related Documents T o install a phone filter , refer to the appropriate document: Document Number Document Title 6035-A2-GN1 1 Hotwire 6035 MVL Phone Filter Installation Instructions 6040-A2-GN1 1 Hotwire 6040 MVL Wall Jack Phone Filter Installation Instructions Contact your sales or service representative to order additional product docu[...]

5 3. Connect a telephone (optional); go to Step 4 if you are not connecting a telephone to the MVL modem. The 6035 phone filter has a cable attached. Plug the other end of this cable into the MVL modem jack labeled PHONE. Using the existing telephone interface cable that was unplugged in Step 1, plug into the POTS filter jack labeled PHONE. 99-1623[...]

6 H Use an Ethernet crossover cable and connect the other end to a PC with an Ethernet Network Interface Card (NIC) installed. PHONE POWER ETHERNET LINE MVL Modem 98-15907 Ethernet Line PC with Ethernet Network Interface Card Ethernet Cable For MVL modem cable pin assignments, refer to Cables & Connectors on page 10. 5. Insert the supplied powe[...]

7 The MVL modem hardware installation is now complete. When the power cord is installed, the MVL modem goes through a power-on self-test. Power -On When power is applied, the MVL modem performs self-diagnostics and the PWR LED is on. The self-diagnostics includes a power-on self-test and all of the LEDs turn on for one second. TST LINE ETHERNET ALM[...]

8 Status LEDs All of the LEDs turn on and off during the power-on self-test. After a successful self-test, the LEDs should appear as indicated in BOLD in the Condition column below . LED State Status PWR ON MVL modem has power . ALM OFF ON No active alarms. An alarm condition exists. TST OFF ON No active tests. The TST LED is on during the power-on[...]

9 LED Symptom Action LINE LED is off. V erify that the MVL LINE cable is securely installed on both ends. If the problem continues, contact the Service Provider . V erify that the line has dial tone. If there is no dial tone, contact the Service Provider . LINE LED is on and there is no data transmission. The MVL link has been established but there[...]

98-15304a 6-Pin RJ11 Plugs Pin #1 Pin #6 10 T o enable the sharing of resources and review security considerations, see Microsoft ’ s Web site at www .microsoft.com . In this example of HomeLink, the PC in the family room could use the office printer . 98-15952a-01 RJ11 W all Jack MVL Modem Office PHONE POWER ETHERNET LINE Hub FA X Ethernet Cable[...]

98-16055a 8-Pin Plug Ethernet Cable Pin #1 Pin #8 11 H The Ethernet interface connector uses an 8-pin, non-keyed modular plug. — T o connect the MVL modem to an Ethernet hub, use the straight-through connection. 8-Pin Straight-Through Connection Pin # Function 1 10BaseT TX D+ 2 10BaseT TX D – 3 10BaseT RX D+ 4 & 5 Not used 6 10BaseT RX D ?[...]

12 Optional MVL Modem W all Placement The Hotwire 6310 MVL Modem is designed for tabletop placement. The MVL modem can also be mounted on a wall. T o mount the modem, you will need: - Three slotted-head #6 self-threading screws with molly bolts - Drill and 3/16 ” drill bit for the molly bolts - Screwdriver A template with the dimensions for the t[...]

13 MVL Modem Hardware T emplate F ront (LEDs) 98-16171 5.43" 7.55" T o Bottom Hole[...]

14 Hotwire 6310 MVL Modem T echnical Specifications Item Specification * Height x Width x Depth 1.43 ″ x 6.00 ″ x 8.75 ″ (3.64 cm x 15.24 cm x 22.23 cm) Weight 1 lb. 1 oz. (0.48 kg) Power Class 2 T ransformer normal service input voltage range Input: 100 V ac (+ 10%), 50 Hz; 120 V ac (+ 10%), 60 Hz; or 230 V ac (+ 10%), 50/60 Hz Output: 15 Vd[...]

15 ! Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. Slots and openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered. 3. Do[...]

16 CE Marking When the product is marked with the CE mark on the equipment label, this demonstrates full compliance with the following European Directives: H Directive 73/23/EEC – Council Directive of 19 February 1973 on the harmonization of the laws of the member states relating to electrical equipment designed for use within states relating to [...]

17 Declaration of Conformity This Declaration of Conformity is made by Paradyne Corporation pursuant to Parts 2 and 15 of the Federal Communications Commission ’ s Rules. This compliance information statement pertains to the following products: T rade Name: Hotwire Model Number: 6310-A2-200 This device complies with Part 15 of the FCC Rules. Oper[...]

18 United States – Notice to Users of the T elephone Network 1. This equipment complies with Part 68 of the FCC rules. On the equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. The label is located on the bottom of your modem. 2. The Hotwire 6310 MVL Mod[...]

19 Notice to Users of the Canadian T elephone Network The Industry Canada label identifies certified equipment. This certification means that the equipment meets telecommunications network protective, operational and safety requirements as prescribed in the appropriate T erminal Equipment T echnical Requirements document(s). The Department does not[...]

20 W arranty , Sales, Service, and T raining Information Contact your local sales representative, service representative, or distributor directly for any help needed. For additional information concerning warranty , sales, service, repair , installation, documentation, training, distributor locations, or Paradyne worldwide office locations, use one[...]