Panasonic TH-50BT300W инструкция обслуживания

Model No. TH-42BT300W TH-50BT300W Operating Instructions High De fi nition Plasma Display Please read these instructions before operating your set and retain them for future reference. English TQB4TC0134[...]

2 Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new Plasma Display . T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence. Retain your pur chase r eceipt also, and not[...]

3 T rademark Credits • VGA is a trademark of International Business Machines Corporation. • Macintosh is a registered trademark of Apple Inc., USA. • SVGA, XGA, SXGA and UXGA are registered trademarks of the Video Electronics Standard Association. Even if no special notation has been made of company or product trademarks, these trademarks hav[...]

4 Safety Precautions W ARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury . (All of the following accessories are manufactured by Panasonic Corporation.) Always be sure to ask a quali fi ed te[...]

5 Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause fi re or damage to the Plasma Display . Do not stick any foreign objects into the Plasma Display . • Do not insert any[...]

6 Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display . • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwis[...]

7 Safety Precautions W ARNING Small Parts 3D Eyewear contains small parts (battery and specialised band, etc.) and must be kept out of reach of small children to avoid accidental ingestion. Disassembly Do not disassemble or modify the 3D Eyewear . Lithium Battery Batteries must not be exposed to excessive heat such as sunshine, fi re or the like. [...]

8 Safety Precautions Viewing 3D Content Content for 3D viewing includes commercially available Blu-ray discs, 3D broadcasts, etc. When preparing your own 3D content, ensure that it is properly produced. Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have any other existing medical conditions. Please[...]

9 Open Hook Close Accessories Supply Accessories Power supply cord Clamper × 1 TMME289 Ferrite core × 2 J0KG00000014 Batteries for the Remote Control T ransmitter (R6 Size × 2) Remote Control T ransmitter N2QA YB000689 Operating Instruction book Check that you have the accessories and items shown Remote Control Batteries Requires two R6 batterie[...]

10 1 2 1 2 Connections Speaker terminal (R) Speaker terminal (L) When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker ’ s Installation Manual for details on speaker installation. AC cord connection (see page 15) Speakers (Optional accessories) Using the clamper Secure any excess cables with clamp[...]

, Y , P B , P R OUT P R P B Y AUDIO OUT R L VIDEO OUT AUDIO OUT R L 11 Connections VIDEO and COMPONENT / RGB IN connection V ideo equipment connection SLOT : T erminal board (optional accessories) insert slot (see page 4) Note: The right side slot is for factory use only . The terminal board with 1-slot width does not function when installed in the[...]

HDMI A V OUT 12 HDMI connection DVI-D IN connection [Pin assignments and signal names] 19 3 1 4 2 18 Note: Additional equipment and HDMI cable shown are not supplied with this set. Pin No. Signal name Pin No. Signal name 1 T .M.D.S Data2+ 11 T .M.D.S Clock Shield 2 T .M.D.S Data2 Shield 12 T .M.D.S Clock- 3 T .M.D.S Data2- 13 CEC 4 T .M.D.S Data1+ [...]

1 6 7 8 3 9 4 5 10 15 14 13 12 1 1 2 13 Connections Notes: • With regard to the typical PC input signals that are described in the applicable input signals list (see page 72), adjustment values such as for the standard picture positions and sizes have already been stored in this unit. Y ou can add up to eight PC input signal types that are not in[...]

6 7 8 9 1 3 4 52 14 SERIAL T erminals connection Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display . • The computer shown is for example purposes only . • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface speci fi cation, so that the[...]

INPUT MENU ENTER/ + / VOL - / 15 Power On / Off Connecting the AC cord plug to the Plasma Display . Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Plasma Display on. Power Indicator: Green T urn the power to the Plasma Display off by pressing t[...]

Day/T ime Setup 99:99 Set Ti me T ime MON 99:99 MON Day Day/T ime Setup 99:99 PRESENT TIME OF DA Y T ime MON 99:99 Set 99:99 Ti me 99:99 PRESENT TIME OF DA Y MON Day English (UK) Deutsch Français Italiano ENGLISH (US) Русский OSD Language Español 16 Power On / Off When fi rst switching on the unit Following screen will be displayed when t[...]

17 Power On / Off When 3D images will be viewed by unspeci fi ed number of people or used for commercial applications, someone in authority should convey the following precautions. These precautions should be followed in the home as well. 3D Viewing/ 3D Content/ V iewing distance/ 3D Eyewear recommendations - T o enjoy 3D images safely and comfort[...]

18 Selecting the input signal Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display . Video input terminal in A V IN (VIDEO). Component or RGB input terminal in COMPONENT/RGB IN.* HDMI input terminal in A V IN (HDMI). DVI input terminal in DVI-D IN. PC input terminal in PC IN. * “COMP[...]

19 INPUT MENU ENTER/ + / VOL - / Basic Controls Main Unit MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 25) Normal Viewing Picture Sound Pos./Size Setup INPUT button (INPUT signal selection) (see page 18) V olume Adjustment V olume Up “+” Down “–” When the menu screen is displayed: “+?[...]

20 Basic Controls Remote Control T ransmitter DVI button Press to select DVI-D input. (see page 18) PC button Press to select PC input. (see page 18) ASPECT button Press to adjust the aspect. (see page 21) SLOT buttons Press to select SLOT T erminal Board. (see page 18) COMPO. button Press to select Component or RGB input. (see page 18) MENU button[...]

INPUT MENU ENTER/ + / VOL - / 4:3 Zoom1 16:9 Zoom2 Zoom3 14:9 Just 21 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. For HD signal input [1 125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF , 1250 (1080) / 50i, 750 (720) / 60p ?[...]

s 1 s 2 s 3 s 4 INPUT MENU ENTER/ + / VOL - / 1 Exit 2 2 Exit or 22 Digital Zoom 1 3 2 4 This displays an enlargement of the designated part of the displayed image. T o use this function, go to “Function Button Settings” in the Setup menu and set this function to the FUNCTION button (see page 56). Display the operation guide. Press [...]

23 V iewing 3D images Y ou can enjoy viewing 3D images with contents or programmes compatible with 3D effect by using the 3D eyewear (optional). Note: Y ou need the 3D IR TRANSMITTER (optional) and the 3D eyewear (optional) to view the 3D images on this display . For further information, see the instruction manuals of the 3D IR TRANSMITTER and the [...]

24 T roubleshooting for 3D Eyewear Symptoms Checks Cannot see 3D images • Has the 3D Eyewear been switched On? • Ensure that “3D Function” in “3D Settings” is set to “On”. (see page 44) • Some 3D image signals may not be automatically recognized as 3D images. Set “3D Picture Format” in “3D Settings” to match the picture fo[...]

25 On-Screen Menu Displays Remote Control Unit 1 Display the menu screen. Press MENU Press several times. Each time the MENU button is pressed, the menu screen will switch. Normal Viewing Picture Sound Pos. /Size Setup 2 Select the menu. Setup Pos./Size Sound Options Picture Monitor Memory save Memory load Memory edit Picture Mode Contrast Normalis[...]

26 Adjusting Pos. /Size 1 Display the menu screen. 2 Select “Pos. /Size”. Setup Pos. /Size Sound Picture 2 access 1 select 3 Select the item and set. 2 adjust 1 select 1:1 Pixel Mode H-Pos 0 0 0 H-Size Auto Setup Normalise V -Pos 0 V -Size 0 Dot Clock 0 0 Clock Phase Clamp Position Off HV Delay Of f 4 Exit the menu. or Notes: • Adjustment det[...]

27 Adjusting Pos. /Size ● Auto Setup When inputting a PC signal as an example, “H-Pos/V -Pos”, “H-Size/V -Size”, “Dot Clock” and “Clock Phase” are automatically corrected. This setting is enabled under the following conditions: • This setting is not activated during Digital Zoom. • When inputting an analog signal (Component/PC[...]

28 Adjusting Pos. /Size ● 1:1 Pixel Mode Adjusts the display size when 1 125i, 1 125p or 1250i signal is input. Notes: • Select On when you would like to replay 1920 × 1080 input signal. • Applicable input signal; 1 125 (1080) / 50i · 60i · 24sF · 24p · 25p · 30p · 50p · 60p, 1250 (1080) / 50i • Select Off when fl ickering is shown[...]

29 Picture Adjustments 1 Display the menu screen. 2 Select “Picture”. Sound Picture Setup Pos./Size 2 access 1 select 3 Select the item and set. 2 adjust 1 select Cinema Advanced settings Picture Mode 20 0 5 Normal Contrast Normalise Brightness 0 Colour 0 Hue Sharpness White balance 4 Exit the menu. or Note: Menu that cannot be adjusted is gray[...]

30 Picture Adjustments ● Picture Mode Y ou can switch to the optimal picture mode for the video source and viewing environment. Monitor Normal Cinema Dynamic Normal: For viewing in standard (evening lighting) environments. This menu selects the normal levels of Brightness and Contrast. Dynamic: For viewing in brighter environments. This menu sele[...]

31 Enables fi ne picture adjustment at a professional level. Notes: The adjustment values are memorized separately for each input terminal. • The adjustment range values should be used as an adjustment reference. • Select the item and set. Advanced settings Carry out “W/B” adjustment as follows. 1. Adjust the white balance of the bright se[...]

32 Picture Adjustments ● Cinema reality When “on”, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second. If the picture is not stable, turn the setting to “off”. Off On Note: When “On”, this setting only affects the following signal input: NTSC / [...]

33 Picture Adjustments 0 2.2 Input level Advanced settings Normalise Gamma 0 0 Off W/B High R W/B High G 0 W/B High B 0 W/B Low R 0 W/B Low G 0 W/B Low B Cinema reality Off Studio Gain 0 Black extension Off Noise reduction Colour gamut 2 access 1 select Colour gamut Colour gamut EBU Select the item and set. Colour space adjustment (Colour gamut) Ch[...]

34 Picture Adjustments ● Reset Resets the adjustment value of colour space. Note: This setting is re fl ected only for the selected input terminal and the “Picture Mode”. 1 Select “Reset”. R Ratio G Ratio B Ratio RG B Colour gamut Edit Reset Colour gamut Custom 65535 2900 0 21 10 65535 0 0 1760 65535 2 access 1 select 2 Select “Ok”. [...]

35 Picture Pro fi les Up to 16 combinations of picture adjustment values (in the Picture menu and Advanced settings) can be stored in the display memory as pro fi les and applied as needed, for a convenient way to enjoy your preferred picture settings. Note: If setting items (Picture menu and Advanced settings) are set differently between Memory [...]

36 Picture Pro fi les Saving pro fi les Follow these steps to save picture adjustment values as pro fi les. Note: When the settings are locked in “Extended life settings”, pro fi les cannot be saved. 1 Specify the picture quality in the Picture menu and Advanced settings. (see page 29-34) 2 In the Picture menu, select “Memory save”. Mem[...]

37 <Loading pro fi les from the Picture menu> 1 In the Picture menu, select “Memory load”. Memory save Memory load Memory edit 2 access 1 select 2 Select the pro fi le to load. MEMORY12 12 . [ ] 1. [ ] MEMORY1 MEMORY2 2. [ ] 2 set 1 select <Loading pro fi les from on the remote control> 1 Press to list the pro fi les. 2 Select t[...]

38 Picture Pro fi les Editing pro fi les Delete or rename pro fi les as follows. <Deleting pro fi les> 1 In the Picture menu, select “Memory edit”. Memory save Memory load Memory edit 2 access 1 select 2 Select “Memory delete”. Memory name change Memory delete 2 set 1 select 3 Select the pro fi le to delete. T o delete all pro ?[...]

39 Sound Adjustment 1 Display the menu screen. 2 Select “Sound”. Setup Pos. /Size Sound Picture 2 access 1 select 3 Select the item and set. 2 adjust 1 select Sound Mode Normal 1 Normalise V olume 0 Bass 0 Mid 0 Treble 0 Balance Surround Off 4 Exit the menu. or Item Details Sound Mode Normal: Emits the original sound. Dynamic: Accentuates sharp[...]

40 1 Display the menu screen. 2 Select “Setup”. Setup Pos. /Size Sound Picture 2 access 1 select 3 Select the item and set. Network Setup External scaler mode Power save Standby save PC Power management Off DVI-D Power management Off On Off Off No signal power off Disable No activity power off Disable Component/RGB － in select RGB OSD design [...]

41 External scaler mode Off On This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as resizing and picture quality adjustment. The setting is valid with the following input signals. 1 125 (1080) / 24p•25p•30p•50p•60p Off: Use the built-in scaler . On: Use an external scaler . [...]

42 Setup menu Power save PC Power management No signal power off No activity power off Off On When this function is turned On, luminous level of the Plasma Display is suppressed, so power consumption is reduced. Disable Enable Equipment power supply is turned Off when there is no signal. When this is set to “Enable”, the power supply of the uni[...]

43 Setup menu OSD design OSD position OSD Language Choose the display position. Each time you press or , the on-screen menu display position changes. Display example Choose the background color (transparency). T ype1 T ype2 T ype3 Select your preferred language. Selectable languages Italiano Français Deutsch English(UK) Español ENGLISH(US) ......[...]

44 3D Settings T o view the 3D images, please adjust and setup the 3D settings. Note: Set these settings for each input terminals. • 3D Function On Off On: T o view the 3D images, please set it to “On”. Y ou can see 3D images for 3D image signal and 2D images for 2D image signal. Off: Y ou can see 2D images instead of 3D images. When set to ?[...]

45 Setup menu Mid FRAME CREA TION Auto Sync 1024 ×768 33.7 kHz 60.0 Hz 1 125(1080)/60i XGA Mode H-Freq. V- Fr e q . Signal Format Signal [ RGB ] Mid FRAME CREA TION Auto 33.7 kHz 60.0 Hz 1 125(1080)/60i XGA Mode H-Freq. V- Fr e q . Signal Format Signal [ Component ] Mid FRAME CREA TION Auto Colour system Signal [ AV ] Signal [ Digital ] 33.7 kHz 6[...]

46 Setup menu • Sync This function operates only during input from PC IN terminal. Setting RGB sync signal Con fi rm that the input is set to RGB input (this setting is valid only for RGB input signal). Auto: The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync. on G: Uses a synchroniz[...]

47 Setup menu W aveform Monitor The input signal from video equipment is displayed as waveforms so that the signal level can be checked. Notes: • This function is enabled when “Studio mode” in Options menu is set to “On”. • This function is disabled during 3D images. • Applicable input signal; HDMI, DVI, SDI Off W aveform Monitor On T[...]

48 Setup menu Marker settings V arious markers for editing image are displayed. Notes: • This function is available when “Studio mode” in Options menu is set to “On” • This function is disabled during 3D images. • An aspect of “4:3” or “16:9” is valid for this function. Only an aspect of “16:9” is valid at the input of HD [...]

49 Setup menu • 4 : 3 Select 4:3 marker display and the safe area marker type. Off 95% 93% 90% 88% 80% User • Selecting User allows the marker area set in 1% increments in “Marker Size (%)” to be re fl ected in the con fi guration of safe area marker . 90% Area marker • Centre The centre marker is displayed. Off On • Cross Hatch The m[...]

50 Setup menu Network Setup Marker settings Waveform Monitor Network Setup Screensaver Input label Extended life settings Function Button Settings On/Off T imer Setup Day/Time Setup Signal 3D Settings RGB/MONO settings The RGB/MONO settings function is also enabled/disabled with the FUNCTION button on the remote control (see page 63). RGB Mode Sele[...]

51 Screensaver Setup menu Do not display a still picture, especially in 4:3 mode, for any length of time. If the display must remain on, a Screensaver should be used. Network Setup External scaler mode Power save Off Off Component/RGB － in select RGB Marker settings Waveform Monitor RGB/MONO settings Input label Extended life settings Function Bu[...]

52 Setup menu 3 Setup of Screensaver Time After selecting T ime Designation, Interval or Standby after SCR Saver , the relevant T ime Setup will become available for selection and the Operating T ime may be set. (Time cannot be set when “Mode” is “On” or “Of f”.) Screensaver Start 6:15 Start Ti me 12:30 Finish Time Time 15:00 Function N[...]

53 Network Setup External scaler mode Power save Off Off Component/RGB － in select RGB Marker settings Waveform Monitor Network Setup RGB/MONO settings Screensaver Input label Extended life settings Function Button Settings On/Off T imer Setup Day/Time Setup Signal 3D Settings Express settings Custom settings Reset Extended life settings 30 Off U[...]

54 Setup menu Peak limit On: Suppresses image contrast (peak brightness). Note: When a still picture is viewed for an extended time, the screen may become slightly darker . (see page 70) Express settings Set the “Image Retention Reduction” menu to the recommended settings. All menus will be locked. Picture Mode: Cinema Contrast: Recommended set[...]

55 Setup menu Custom settings Set the individual “Image Retention Reduction” menu. 1 Select “Custom settings”. Custom settings Reset Extended life settings Express settings 2 access 1 select 2 T o set each menu to the recommended setting: Select “Recommended settings”. 30 Off Unlock High Dynamic Mid Contrast Picture Mode Extended life s[...]

56 Setup menu The input label changes as follows each time the ◄ or ► button is pressed. (Skip) : The INPUT button press will skip its input. This function can change the label of the Input signal to be displayed. (see page 18) Customizing the Input labels Note: The setting items are the same as the input terminal list of “Selecting the input[...]

57 Setup menu MON 15:00 Ti me Day Day/T ime Setup T ime MON 15:00 Set Day/T ime Setup / On/Off Timer Setup Network Setup Component/RGB － in select RGB Network Setup Screensaver Extended life settings Function Button Settings On/Off T imer Setup Day/Time Setup Input label 2 access 1 select Press to select Day or T ime. Press to set up Day or T ime[...]

58 Setup menu Make the various settings to use the network function. Save Save the current network Setup. Each value set for DHCP , IP address, Subnet mask, and Gateway will be saved. If “NG” is displayed, check the same IP address is not used within the same network. DHCP (DHCP client function) T o obtain an IP address automatically using a DH[...]

59 Options Adjustments Item Adjustments Audio input select Set up the sound when an image input is selected. (see page 62) Onscreen display On: Displays all the following on screen. • Power on display • Input signal switch display • No signal display • Remainig time of of f-timer after was pressed. Off: Hides all the items above from view .[...]

60 Item Adjustments ID select Sets panel ID number when panel is used in “Remote ID” or “Serial ID”. Set value range: 0 - 100 (Standard value: 0) Remote ID The setting of this menu is valid only when using ID remote control. Off: Disables ID remote control functions. Y ou can use normal remote control operations. On: Enable ID remote contro[...]

61 Item Adjustments Auto Setup Sets the operational mode of the automatic position adjustment in the Pos./Size menu. Manual: Automatic position adjustment starts when is pressed on the remote control or automatic position adjustment is executed from the Pos./Size menu. Auto: Other than remote control or menu operation, automatic position adjustment[...]

62 Options Adjustments Set up the sound when an image input is selected. Image input Audio input [SLOT INPUT]*1 SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIO [VIDEO] SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIO [COMPONENT]*2 SLOT INPUT / VIDEO / COMPONENT / DVI/PC / NO AUDIO [HDMI] SLOT INPUT / VIDEO / COMPONENT / HDMI / DVI/PC / NO AUDI[...]

63 Display of the FUNCTION button guide Pressing the FUNCTION button can display the FUNCTION button guide to refer for the function of each button. Assigning functions to the FUNCTION button on the remote control enables a user to switch between show/hide and modes with just a single touch of a button. The function settings are con fi gured by us[...]

64 Using FUNCTION button W aveform Monitor The waveform monitor displays (see page 47). T o exit this mode, press the FUNCTION button. Marker settings The marker displays (see page 48). Each time the FUNCTION button is pressed, the screen is switched in the following order; Preset 1 → Preset 2 → Of f. HV Delay The video blanking period displays[...]

65 Using Network Function This unit has a network function to control the network connected display with your computer . Note: T o use the network function, set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 58) When “LAN” is set, the slot power is turned on, and power indicator is lit[...]

66 Using Network Function PJLink™ Protocol The network function of the unit conforms with PJLink™ class 1 and you can operate the following actions from your computer using PJLink™ protocol. • Display setup • Display status query Supported commands Commands to control the unit with PJLink™ protocol are shown in the table below . PJLink?[...]

67 Unit Setup Set each “Network Setup” setting and make sure to set the “Control I/F Select” to “LAN”. (see page 58) Computer Setup Disable the proxy server settings and enable JavaScript. Y ou can use a Web browser to control the unit and set up a network and password. Access to the T OP screen of the Web browser control using a W eb b[...]

68 Using W eb Browser Control TOP screen structure of the Web browser control After logging in, the T OP screen of the Web browser control is displayed. Menu Menu items are displayed. When a button is clicked, setup screen of each item is displayed. Item Details BASIC CONTROL BASIC CONTROL screen is displayed. (see below) OPTION CONTROL OPTION CONT[...]

69 Notes: • T o use a DHCP server , make sure the DHCP server is started. • During a DHCP server is used, IP ADDRESS, SUBNET MASK, and GA TEWA Y values cannot be entered. • When the set values are changed properly , “NETWORK SETTING CHANGED.” message and the changed set items are displayed. Item Details DHCP Set to ON when a DHCP server i[...]

70 T roubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below . Symptoms Checks Picture Sound Interference Noisy Sound Electrical Appliances Cars / Motorcycles Fluorescent light Normal Picture No Sound V olume (Check whether the mute function has been activated on the remote control.) Check if s[...]

71 List of Aspect Modes Aspect mode Picture Enlarged screen Description All Aspect: On Factory setting All Aspect: Off 16:9 16:9 The display of the pictures fi lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally , and displayed. This mode is suited to displaying anamorphic pictures with a 16:9 aspe[...]

72 Applicable Input Signals Signal name Horizontal frequency (kHz) V ertical frequency (Hz) COMPONENT / RGB IN / PC IN (Dot clock (MHz)) DVI-D IN (Dot clock (MHz)) HDMI 1 525 (480) / 60i 15.73 59.94 * (13.5) * (27.0) * 2 525 (480) / 60p 31.47 59.94 * (27.0) ∗ 5 * (27.0) * 3 625 (575) / 50i 15.63 50.00 * (13.5) 4 625 (576) / 50i 15.63 50.00 * (27.[...]

73 ID Remote Control Function Applicable Input Signals Video input (VIDEO) Signal name Horizontal V ertical frequency(kHz) frequency(Hz) 1 NTSC 15.73 59.94 2 P AL 15.63 50.00 3 P AL60 15.73 59.94 4 SECAM 15.63 50.00 5 Modi fi ed NTSC 15.73 59.94 Y ou can set the remote control ID when you want to use this remote control on one of several different[...]

74 Note: Press to return to Setup menu when con fi rmation screen is displayed. [from the unit] 1 Press the MENU button till the Setup menu is displayed. 2 Press the or button to select “OSD Language”. 3 Press the ENTER button for more than 5 seconds. 4 Press the or button to select “YES”. 5 Press the ENTER button. 6 Press the or button to[...]

75 Speci fi cations TH-42BT300W TH-50BT300W Power Source 220 - 240 V AC, 50/60 Hz Power Consumption Power on 305 W 390 W Stand-by condition Save off 0.8 W , Save on 0.5 W Save off 0.8 W , Save on 0.5 W Power off condition 0.3 W 0.3 W Plasma Display panel Drive method : AC type 42-inch, 16:9 aspect ratio Drive method : AC type 50-inch, 16:9 aspect [...]

<Software Information for This Product> This product has software installed partially licensed under the Free BSD LICENSE. Free BSD LICENSE regulations under the above specifications are as follows: (These regulations are set by the third party; therefore the original (English) regulations are stated.) Copyright © 1980, 1986, 1993 The Regent[...]