Panasonic KX-TG2581ALS, KX-TG2581NZS инструкция обслуживания

Charge the battery for about 6 hours before initial use. Preparation Cordless Telephone Answering System Useful Information Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. 2.4GHz Digital Cordless Answering System Operating Instructions Model No. KX-TG2581ALS KX-TG2581NZS[...]

Before Initial Use 2 Thank you for purchasing your new Panasonic cordless telephone. For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Attach or keep original receipt to assist with any repair under warranty. Accessories (included) AC Adaptor (p. 12) Wall Mounting Adaptor (p. 66) one [...]

For Best Performance 3 Battery Charge A rechargeable Nickel Cadmium (Ni-Cd) battery powers the handset. Charge the battery for about 6 hours before initial use (p. 13). • As preventative maintenance, clean the handset and the base unit charge contacts with a soft, dry cloth once a month. Clean more often if the unit is subject to grease, dust or [...]

Preparation Location of Controls ..................................................................... 6 Displays ......................................................................................... 8 Settings .......................................................................................... 12 Connections .............................[...]

Special Features ........................................................................... 50 Automatic Security Code Setting ................................................. 50 Call Waiting and Caller ID Compatible (For Australia only) ........ 50 How to Use the PAUSE Button (For PBX Line/Long Distance Calls) ...................................[...]

Location of Controls 6 Handset REDIAL REDIAL PAUSE PAUSE 0 STOP ANS O F F OFF AN S S ON R E C A L L RECALL P L PL AY B A BA CK 7 8 9 F U N C T IO N FUNCTION / E X IT EXIT INTERCOM/CLEAR 1 2 3 4 5 6 AL L L MS G S K IP KIP NE W W MSG RE P E PE AT CH CH LOU D LOUD SE SE A RC RC H BACK FW D E D IT EDIT ON OFF TALK DIRECT Navigator Key ( , , BACK , FWD/[...]

7 Preparation Base unit G R E E T IN G GREETING R E P E A T REPEAT S K IP SKIP E R A S E ERASE V O L U M E VOLUME IN U S E IN USE C H A R G E CHARGE MIC MIC S P R E A D S P E C T R U M STO P A N S W E R ANSWER O N ON S L O W T A L K SLOW TALK N E W M EW M ESSA G E / E/ (REPEAT) Button (p. 55) (SKIP) Button (p. 55) (NEWÒMESSAGE/SLOW!TALK) Button (p[...]

Displays 8 Both the handset and the base unit show you instructions and information on their displays. These display prompts are shown below. The Caller List is empty or there are no stored items in the directory. The battery needs to be charged. Place the handset on the base unit to charge the battery (p. 14). The display shows the number of new c[...]

9 Preparation The handset has lost communication with the base unit. Place the handset on the base unit and try again. This is an information from the Caller List. The display shows: — the caller’s phone number, — the time and date of the last call (ex. Jan. 10, 11:20 AM), and — the number of times called (ex. 3 times). This is a name from [...]

10 Ö , Ñ , BACK Ü or FWD/EDIT á was pressed while the handset was on the base unit. Lift the handset and press the button again. While the base unit was not in the standby mode, Ö or Ñ was pressed to search the Caller List/directory list, FWD/EDIT á was pressed to select an option or (INTERCOM/CLEAR) was pressed. When trying to store an item[...]

11 Preparation Base unit display The clock needs adjusting (p. 24). Your greeting message was not recorded correctly. Record it again (p. 21). The unit is in the answering system programming mode. The speaker volume level is set to “5”. You can select 9 levels (0–8) while using the answering system (p. 53) or the intercom (p. 49). 12 messages[...]

Settings 12 Connections • USE ONLY WITH Panasonic AC ADAPTOR PQLV10AL. • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) • To connect a standard telephone on the same line, see page 69. • If your unit is connected to a PBX which does not support Caller ID services, you cannot access[...]

13 Preparation Needs to be recharged. Battery Charge Place the handset on the base unit and charge for about 6 hours before initial use. • The IN USE/CHARGE indicator lights and a beep sounds. Battery strength You can check the battery strength on the handset display while the handset is on the base unit, while it is in use (making/answering a ca[...]

Settings 14 Up to 3.5 hours Up to 11 days Operation Operating time While in use (TALK) Up to 4.5 hours While not in use (Standby) near the base unit* away from the base unit *Within about 3 meters • The battery operating time may be shortened depending on usage conditions, such as viewing the Caller ID Caller List or directory list, and ambient t[...]

15 Preparation H When the optional headset is connected to the handset, make sure to use the headset to talk with the caller. If you want to have a normal cordless phone conversation, disconnect the headset. Using the Belt Clip You can hang the handset on your belt or pocket using the belt clip. Headset Jack To attach the belt clip To remove the be[...]

Settings 16 Selecting the Line Mode If the line is connected to a low voltage system such as a PBX, set to “B”. Otherwise the Call Waiting Caller ID Feature may not be used (p. 50). Your phone comes from the factory set to “A”. Use the handset near the base unit. Make sure the unit is in the standby mode initially. 1 Press (FUNCTION/EXIT/CH[...]

Programmable Functions 17 Preparation H Save DIRECT# ............. Recall time ............... Set line mode .......... Talk switching ........ TAD program ................ You can program the following functions by using the handset near the base unit . The display shows the programming instructions. See the corresponding pages for function detail[...]

18 Setting the Auto Talk Feature The Auto Talk feature allows you to answer a call by lifting the handset off the base unit without pressing (TALK) . If you want to use this feature, turn the feature ON by programming. Your phone comes from the factory set to OFF. Make sure the unit is in the standby mode initially. 1 Press (FUNCTION/EXIT/CH) . 2 P[...]

19 Preparation Selecting the Ringer Volume You can program the ringer volume to HIGH, LOW or OFF. If set to OFF, the unit will not ring. Your phone comes from the factory set to HIGH. Make sure the unit is in the standby mode initially. 1 Press (FUNCTION/EXIT/CH) . 2 Press Ö or Ñ repeatedly until the arrow points to “ Ringer volume ”. 3 Press[...]

20 Selecting the LCD Contrast You can program the handset LCD contrast (5 levels). To make the handset display clearer, set to high level. Your phone comes from the factory set to level 3. Make sure the unit is in the standby mode initially. 1 Press (FUNCTION/EXIT/CH) . 2 Press Ö or Ñ repeatedly until the arrow points to “ LCD contrast ”. 3 P[...]

Preparing the Answering System 21 Preparation To increase the volume, press VOLUME . To decrease, press VOLUME . Greeting message sample “Hello, this is (your name and/or number). Sorry I cannot take your call. Please leave a message after the beep. Thank you.” Greeting Message You can record a personal greeting message of up to 2 minutes . If [...]

22 To erase the recorded greeting message Press (GREETING) briefly press (ERASE) while the message is being played. • The unit will answer a call with a pre-recorded greeting. Pre-recorded greeting message If you do not record a greeting message (p. 21), one of two messages will be played when a call is received, depending on the caller’s re[...]

23 Preparation Programming Summary for the Answering System You can program the following functions using the handset near the base unit. See the page numbers below for details. Make sure the unit is in the standby mode initially. • You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH) . • If you do not press any buttons for[...]

24 1 Press (FUNCTION/EXIT/CH) . 2 Press Ö or Ñ repeatedly until the arrow points to “ Program ”. 3 Press FWD/EDIT á ( Yes key). 4 Press Ö or Ñ repeatedly until the arrow points to “ TAD program ”. 5 Press FWD/EDIT á ( Yes key). • “P” is displayed on the base unit. 6 Press (0) . • “ Set time ” is announced. If previously ad[...]

25 Preparation • In step 7, you cannot enter numbers greater than 12. Do not use military. (To set 13:00 hours, enter “0100”, and select “PM” by pressing (*) .) If a power failure occurs, the time may be shifted. When “ ” flashes on the base unit display, reprogram the current day/time. For Caller ID service users (p. 31) • The Cal[...]

26 Selecting the Caller’s Recording Time You can select “1 minute”, “3 minutes” or “Greeting only” for the caller’s recording time. Your phone comes from the factory set to “3 minutes”. 1 Press (FUNCTION/EXIT/CH) . 2 Press Ö or Ñ repeatedly until the arrow points to “ Program ”. 3 Press FWD/EDIT á ( Yes key). 4 Press Ö o[...]

27 Preparation Selecting the Number of Rings You can select the number of times the unit rings before the answering system answers a call, from “3” to “7” or “AUTO” (for Toll Saver*). Your phone comes from the factory set to “4”. 1 Press (FUNCTION/EXIT/CH) . 2 Press Ö or Ñ repeatedly until the arrow points to “ Program ”. 3 Pr[...]

Making Calls 28 1 Press (TALK) . 2 Dial a phone number. • The dialled number is displayed. • After a few seconds, the display will show the length of the call and the battery strength. 3 To hang up, press (TALK) or place the handset on the base unit. • If the handset has lost communication with the base unit, 3 beeps sound and “ No link to [...]

29 Cordless Telephone To dial after confirming the entered number 1 Dial a phone number. • If you misdial, press (INTERCOM/CLEAR) and dial again. 2 Press (TALK) . • After a few seconds, the display will show the length of the call and the battery strength. 3 To hang up, press (TALK) or place the handset on the base unit. To redial after confi[...]

30 Answering Calls When a call is received, the unit rings, “ Incoming call ” is displayed on the handset and the IN USE/CHARGE indicator on the base unit fl ashes quickly. If you subscribe to a Caller ID service, the calling party information will be displayed after the fi rst ring (p. 31). In order to view the Caller ID information, please [...]

31 Cordless Telephone Caller ID Service This unit is compatible with a Caller ID service offered by your telephone company. If you subscribe to a Caller ID service, the calling party ’ s information will be shown on the handset display after the fi rst ring. The unit can record information of up to 50 different callers in the Caller List. The Ca[...]

32 • If “ No items stored ” is displayed, the Caller List is empty. • Caller information cannot be displayed in the following cases: • — If the caller dialled from an area which does not provide a Caller ID service, the display will show “ Out of area ” . • — If the caller has requested not to display his/her information, the di[...]

33 Cordless Telephone Using the Caller List 1 Lift the handset off the base unit and press Ö or Ñ to enter the Caller List. • The display will show, for example, the following. • You can go to the directory list by pressing FWD/EDIT á (p. 45). 2 To search from the most recent call, press Ö . To search from the oldest call, press Ñ . • To[...]

34 Lift the handset off the base unit and press Ö or Ñ . Display meaning: √ : You have checked this caller information, answered the call, called back the caller or played back the message. ✕ 2- ✕ 9 : The number of times the same caller called (up to 9). After checking, “ ✕ 2 ” – “ ✕ 9 ” will be replaced with “ √ ” . Ex.[...]

35 Cordless Telephone 1 Lift the handset off the base unit and press Ö or Ñ to enter the Caller List. 2 Press Ö or Ñ repeatedly to fi nd the desired caller. 3 Press (TALK) . • The displayed phone number is dialled automatically. 0355566677 11:20A JAN12 ✕ 3 Talk 0355566677 Calling Back from the Caller List • In some cases, you may have to[...]

1 Lift the handset off the base unit and press Ö or Ñ to enter the Caller List. 2 Press (Å) or (Ä) repeatedly to fi nd the desired caller. 3 Each time you press FWD/EDIT (É) ( Edit key) to edit, the number is rearranged into one of 2 different patterns. a (The fi rst 2 digits are deleted.) b Free editing • You can add digits to the front o[...]

37 Cordless Telephone Storing Caller List Information in the Directory You can store names and phone numbers that are in the Caller List into the directory. Make sure the unit is in the standby mode initially. 1 Lift the handset off the base unit and press Ö or Ñ to enter the Caller List. 2 Press Ö or Ñ repeatedly to fi nd the caller you want [...]

Erasing Caller List Information After checking the Caller List, you can erase some or all of the entries. Make sure the unit is in the standby mode initially. To erase a specific caller from the Caller List 1 Lift the handset off the base unit and press Ö or Ñ to enter the Caller List. 2 Press Ö or Ñ repeatedly to fi nd the caller you want to[...]

39 Cordless Telephone To erase all entries in the Caller List Before erasing all entries, make sure that “ 0 new call ” is displayed. 1 Lift the handset off the base unit and press Ö or Ñ to enter the Caller List. 2 Press (INTERCOM/CLEAR) . 3 Press Ö or Ñ to select “ All clear ” . 4 Press FWD/EDIT á ( Yes key) or (INTERCOM/CLEAR) . •[...]

4 While the arrow points to “ Save DIRECT# ” , press FWD/EDIT á ( Yes key). 5 Enter a phone number, up to 22 digits. • Each time you press (INTERCOM/CLEAR) , a digit is erased. To erase all digits, press and hold (INTERCOM/CLEAR) . • To move the cursor, press BACK Ü or FWD/EDIT á . 6 Press Ö ( Next key). • If you want to edit the ente[...]

41 Cordless Telephone Using the Directory You can store up to 50 names and phone numbers in the directory using the handset. All directory items are sorted by the first word in alphabetical order. Using the directory, you can make a call by selecting a name on the handset display. When you receive a caller ID call from a caller stored in the direc[...]

1 Press (FUNCTION/EXIT/CH) . 2 While the arrow points to “ Save directory ”, press FWD/EDIT á ( Yes key). • The display shows the number of stored items in the directory. 42 3 Enter a name, up to 15 characters using the dialling buttons (p. 43). • To move the cursor, press BACK Ü or FWD/EDIT á . • If a name is not required, press Ö ( [...]

# & ’ ( ) ,–. /1 A B C a bc2 D E F d ef3 G H I g hi4 J K L jkl 5 M N O m no6 PQ R S p q r s 7 T U V t uv8 W X Y Z w xyz 9 0 Space To move the cursor to the left To move the cursor to the right (1) (2) (3) (4) (5) (6) (7) (8) (9) (0) BACK Ü FWD/EDIT á 123456789 1 0 1 1 Number of times key is pressed Selecting Characters to Enter Names The [...]

44 For example, to enter “Tom Jones”: 1 Press (FUNCTION/EXIT/CH) . 2 While the arrow points to “ Save directory ”, press FWD/EDIT á ( Yes key). 3 Press (8) . 4 Press (6) six times, then press FWD/EDIT á to move the cursor to the right. 5 Press (6) four times. 6 Press FWD/EDIT á twice to enter a blank. 7 Press (5) . 8 Press (6) six times,[...]

45 Cordless Telephone Finding Items in the Directory You can search the directory using the handset. Make sure the unit is in the standby mode initially. 1 Press BACK Ü or FWD/EDIT á to enter the directory list. 2 Press Ö or Ñ . • The first item is displayed. 3 Press Ö or Ñ repeatedly until the desired item is displayed. . • All director[...]

46 1 Press BACK Ü or FWD/EDIT á to enter the directory list. 2 Press Ö or Ñ . • The first item is displayed. 3 Press Ö or Ñ repeatedly to find the directory item that you want to dial. • To search for the item by initial, see page 45. • To exit the directory, press (FUNCTION/EXIT/CH) . 4 Press (TALK) . • The number is dialled automa[...]

47 Cordless Telephone Editing an Item in the Directory Make sure the unit is in the standby mode initially. 1 Press BACK Ü or FWD/EDIT á to enter the directory list. 2 Press Ö or Ñ . • The first item is displayed. 3 Press Ö or Ñ repeatedly to find the directory item you want to change, and press FWD/EDIT á . • To search for the item by[...]

48 Erasing an Item from the Directory Make sure the unit is in the standby mode initially. 1 Press BACK Ü or FWD/EDIT á to enter the directory list. 2 Press Ö or Ñ . • The first item is displayed. 3 Press Ö or Ñ repeatedly to find the directory item you want to erase. • To search for the item by initial, see page 45. 4 Press (INTERCOM/C[...]

49 Cordless Telephone During an intercom call: • Intercom calls can only be ended with the handset. • If the handset user has difficulty hearing the base unit user, decrease the base unit speaker volume by pressing VOLUME . • If an incoming call is received, the intercom call stops and the unit starts to ring. To answer, press (TALK) . Interc[...]

50 Special Features Automatic Security Code Setting Each time you place the handset on the base unit, the unit automatically selects one of more than a million security codes. These codes help prevent the unauthorized use of your telephone line by another cordless telephone user. Call Waiting and Caller ID Compatible (For Australia only) If you sub[...]

How to Use the PAUSE Button (For PBX Line/Long Distance Calls) We recommend you press (REDIAL/PAUSE) if a pause is required for dialling with a PBX or to make a long distance call. Ex. Line access number (9) (PBX) (9) (REDIAL/PAUSE) • Pressing (REDIAL/PAUSE) once creates a 3.5 second pause. This prevents misdialling when you redial or dial a [...]

52 Special Features • You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH) . • Users in Australia can access Telstra’s “EASY CALL” service by having the recall time set at 100 msec (this is the factory default setting), and then follow Telstra’s “EASY CALL” instructions to operate this service. • If the unit i[...]

Setting the Unit to Answer Calls Press (ANSWER!ON) to turn on the answering system. • The indicator lights and “ Answer set ” is heard. • The unit will announce the remaining recording time if it is less than 5 minutes. • If you hear “ Memory full ”, “ ” is displayed on the base unit and the ANSWER ON indicator flashes rapidly, e[...]

54 Listening to Messages You can see the total number of recorded messages on the base unit display. If the ANSWER ON indicator flashes, new messages have been recorded. Listening to only new messages Press (NEW!MESSAGE/SLOW!TALK) briefly. • The unit announces the number of new messages and plays them back. Listening to all recorded messages Pr[...]

55 Answering System For Caller ID service users (p. 31) During playback, when the handset is on the base unit, the handset display will show the name and/or number of the caller whose message is being played. To call back the displayed number: During playback, lift the handset and press (TALK) within 10 seconds. • The unit stops playback and auto[...]

56 From the Handset If someone else is in the room and you want to listen to the recorded messages privately, you can use the handset. 1 Handset: Press (RECALL/PLAYBACK) . • The number of new messages is heard on the handset. 2 Base unit: To listen to new messages, press (NEW!MESSAGE/SLOW!TALK) briefly. To listen to all messages, press and hold [...]

57 Answering System Erasing Messages The unit will announce the remaining recording time after playback, if it is less than 5 minutes. New messages cannot be recorded when: —“ Memory full ” is heard. —“ ” is displayed on the base unit. —the ANSWER ON indicator flashes rapidly. Erase some, or all, of the messages. We recommend you era[...]

58 Remote Operation from a Touch Tone Phone You can operate the answering system from any touch tone phone. A synthesized voice menu will guide you on how to operate the unit (p. 60). • To skip the voice menu and operate the unit directly, see page 62. Summary of remote operation Call your unit from a touch tone phone. Enter your remote code (p. [...]

59 Answering System Setting the Remote Code The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00–99) . The factory preset remote code is “ 11 ”. If you do not program your own remote code, you can use “11”. Make sure the unit is in the standby mode initially. 1[...]

60 Remote Operation from a Touch Tone Phone Voice Menu The shaded boxes are voice prompts. Press 1 to play back all messages. Press 2 for other functions. Press 1 to play back new messages. Press 2 for other functions. Press 1 to record your message. Press 2 for other functions. Press 1 to erase all messages. Press 2 for other functions. Press 1 to[...]

61 Answering System All Message Playback All recorded messages are played back. At the end of the last message, “ End of final message ” is heard. The unit will announce the remaining recording time if it is less than 5 minutes. New Message Playback Only new messages are played back. At the end of the last message, “ End of final message ?[...]

62 [ Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu. To end the remote operation, hang up anytime. Direct commands NEW MESSAGE PLAYBACK ALL MESSAGE PLAYBACK REPEAT (During playback) SKIP (During playback) CHANGI[...]

63 Answering System ERASING A SPECIFIC MESSAGE (During playback) ERASING ALL MESSAGES ANSWERING SYSTEM OFF (0) • The current message is erased. • A short beep will sound and the next message will be played. • All recorded messages are erased. • A long beep sounds and “ No messages ” is heard. • The unit hangs up and will not answer ca[...]

64 Remote Operation with the Handset Voice menu If no commands are entered after you press (RECALL/PLAYBACK) , the unit will start the following voice menu. “ Press 4 to play back new messages. Press 5 to play back all messages. ” • You can enter direct commands even if the voice menu has started. You can operate your answering system with th[...]

65 Answering System Direct commands NEW MESSAGE PLAYBACK ALL MESSAGE PLAYBACK REPEAT (During playback) SKIP (During playback) CHANGING PLAYBACK SPEED (During playback) STOP ERASING A SPECIFIC MESSAGE (During playback) ERASING ALL MESSAGES ANSWERING SYSTEM OFF ANSWERING SYSTEM ON (4) (5) (1) (2) (9) (*) (4) (*) (5) • Only new messages are played b[...]

66 Wall Mounting This unit can be mounted on a wall. 2 Connect the AC adaptor. 3 Tuck the telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow. • The word “UP” should face upward. 1 Push the hook and turn it around. Turn the hook until a click is heard. To Power Outlet[...]

For A ustralia T o T elephone Plug connected to Sock et OR For New Zealand T o Single-Line T elephone Jac k 67 Useful Information 5 To charge the handset battery: Fix the charge contacts ( # ) and insert the hook to the handset hole ( $ ). • The IN USE/CHARGE indicator lights. 2 1 Hook Hole OR 8.3 cm Wall Template Screws Hooks 8.3 cm 4 Install sc[...]

Battery Replacement If “ Recharge ” is displayed and/or “ ” flashes after a few telephone calls even if the battery was fully charged, replace the battery with a new Panasonic N4HKGMB00001 (P-P510) battery. 1 Press the notch on the battery cover firmly and slide it as indicated by the arrow. 2 Remove the old battery and wait for a few min[...]

69 Adding Another Phone This unit will not function during a power failure. To connect a standard telephone on the same line, use a telephone double adaptor (for Australia) or a T-adaptor (for New Zealand). To Socket (Optional) Telephone Double Adaptor Standard Telephone Telephone Line Cord Standard Telephone Telephone Line Cord T-Adaptor (Optional[...]

70 Troubleshooting Problem “ No link to base Place on cradle and try again. ” is displayed and an alarm tone sounds. Static, sound cuts in/out, fades. Interference from other electrical units. The handset does not ring. The handset display is blank. The handset display is still blank after pressing Ö , Ñ , BACK Ü or FWD/EDIT á . You cannot [...]

71 Useful Information Problem The unit does not display the caller’s name and/or phone number. The handset display goes to the standby mode while viewing the Caller List. When a second call is received during a conversation, the unit does not display the new caller’s name and/or phone number. (LOCATOR/INTERCOM) does not function. You cannot red[...]

72 Troubleshooting Problem The answering system is on, but incoming messages are not recorded. You cannot listen to the recorded messages. “ ” is displayed and the ANSWER ON indicator flashes rapidly, and no new messages are recorded. You cannot operate the answering system at the base unit. You cannot operate the answering system from a touch[...]

73 Useful Information Problem You cannot operate the answering system with the handset. While recording a greeting message, the unit starts to ring and stops recording. During playback, the unit starts to ring and stops playback. The handset does not display the name and/or number of the caller whose message is being played. Cause & Remedy • [...]

74 Problem You cannot program items, such as the LCD contrast. Previously programmed information is erased. “ Recharge ” is displayed on the handset, “ ” flashes or the unit beeps intermittently. You charged the battery fully, but “ Recharge ” is still displayed and/or “ ” continues to flash. The IN USE/CHARGE indicator light does[...]

75 Useful Information Safety Instructions Take special care to follow the safety suggestions listed below. Safety 1) The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the unit. 2) When left unused for a long period of time, the base unit should be unplugged from the household AC [...]

76 WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO LIQUID OR ANY TYPE OF MOISTURE. When a failure occurs which results in the internal parts becoming accessible, disconnect AC adaptor immediately and return this unit to the place of purchase or service centre. If there is any trouble, disconnect the unit from the telephone l[...]

77 Useful Information For New Zealand Users Only The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides n[...]

78 Important Information (For Australia only) SOCKET SCREW “A” PLUG Fig. 1 TELEPHONE CORD Connect to the PLUG as shown in Fig. 1. ( ) SCREW “ B ” Fig. 2 SCREW “ B ” Fig. 3 SOCKET SCREW “ A ” Fig. 4 Instructions to customer Installation Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted [...]

79 Useful Information If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed. You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern pl[...]

PQQX13461ZA-BM S0802-1082 Kyushu Matsushita Electric Co., Ltd. 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan[...]