Panasonic AJ-SDC905p инструкция обслуживания

Operating Instructions Camera/VTR Before operating this product, please read the instructions carefully and save this manual for future use. Printed in Japan VQT0N11 F0904W0 -F @ P Model No. AJ- P Model No. AJ- P[...]

2 indicates safety information. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the [...]

3 Contents Chapter 1 General .................................... 5 1-1 Features of the camera unit ...................... 5 1-2 Features of the VTR unit ........................... 6 1-3 System configuration ................................ 7 Chapter 2 P arts and their functions ....... 8 2-1 Power supply and accessory mounting section ...........[...]

4 Contents 5-4 Audio input signal preparations ............. 66 5-4-1 When using the front microphone ............... 66 5-4-2 When using an external microphone ........... 66 5-4-3 When using a wireless receiver ................... 67 5-4-4 When using an audio component ................ 67 5-5 Mounting the unit on a tripod ................. 68 5-6[...]

Chapter 1 General 1 5 ≥ 3 CCDs with a 2/3-inch on-chip lens Aspect ratios of 16:9 and 4:3 are supported. ≥ Storage type high-sensitivity function The unit comes with a storage type gain increase function. This is a function that makes it possible to achieve a higher sensitivity of up to 20 dB above the regular gain increase. <Note> Due to[...]

Chapter 1 General 6 ≥ DVCPRO and DVCPRO50 formats supported The VTR unit compresses the images using a component digital recording system that uses the latest compression technology, and for the sound it employs non-compression PCM recording with an excellent signal-to-noise ratio, frequency band, waveform characteristics and reproduction charact[...]

26-pin camera adapter: AJ-CA905G 26-pin cable: AJ-C26050G (50 m), AJ-C26100G (100 m) Remote control unit: AJ-RC905 V-mount type battery plate NP-1 type battery holder BP-90 type battery holder PRO14, TRIM14, HYTRON50/100/120, DIONIC90/160 ENDURA50/80, BP-L60/90 NP-L50 BP-H120, HP-90L Battery Chapter 1 General 1 7 Microphone kit: AJ-MC700 UniSlot ®[...]

Chapter 2 P arts and their functions 8 1 POWER switch This switch turns the power ON and OFF. 2 Battery mount This is for attaching the Anton Bauer battery pack. 3 DC IN (external power input) socket (XLR, 4-pin) When operating this unit using an AC power source, this socket is connected to the model AJ-B75 AC adapter (optional accessory). 4 BREAKE[...]

Chapter 2 P arts and their functions 2 9 2-2 A udio function section (input system) 1 2 5 6 9 @ ? ? 8 = < > 7 3 ; : 4 1 MIC IN (microphone input) jack (XLR, 3-pin) Connect the microphone (optional accessory) here. The power for the microphone is supplied from this jack. 2 AUDIO LEVEL CH1/CH2 (audio channel 1 & 2 recording level adjustment[...]

Chapter 2 P arts and their functions 10 2-2 A udio function section (output system) 2 Either STEREO or MIX can be selected as the setting for the MONITOR SELECT item by opening the <MIC/AUDIO2> screen from the VTR MENU page by performing a menu operation. CH1/3 Audio channel 1 Audio channel 3 MONITOR SELECT CH1/2 O CH3/4 selector switch CH1/2[...]

Chapter 2 P arts and their functions 2 11 1 9 8 4 @ 7 6 5 < > 2 = B A C I ? ; : 3 ª 6 5 1 / ; EJECT / REW FF / STOP PLA Y / PA USE D G H E F 2-3 Shooting and recording/ pla yback function section Shooting and recording (camera unit) 1 FILTER (filter switching) controls These are used to select the filter in accordance with the subject ’ s [...]

Chapter 2 P arts and their functions 12 AUTO KNEE function When shooting with the level set to people or scenes against a high- brightness background, the background will be whitened out, and the buildings and scene in the background will be blurred. If the AUTO KNEE function is activated at times like this, the background will be reproduced clearl[...]

Chapter 2 P arts and their functions 2 13 = OUTPUT SEL (output signal selection) switch This is used to select the signals output from the VIDEO OUT connector and MON OUT connector. VTR : In the recording or other EE mode, the camera images are output from the connectors; in the playback or other VV mode, it is the VTR ’ s playback signals which [...]

Chapter 2 P arts and their functions 14 4 3 2 1 2-4 Menu operation section 1 MENU button This is used to switch the menu ON and OFF. 2 JOG dial button This is used to select the menu items and perform settings when the MENU button 1 is at the ON position. 3 Setup card insertion slot This is where the SD card (optional accessory) or Multimedia card [...]

Chapter 2 P arts and their functions 2 15 3 2 1 9 6 4 5 7 8 2-5 Time code related section 1 GENLOCK IN connector (BNC) The reference signal is input to this connector when genlock is to be established with the camera unit or when the time code is to be externally locked. 2 TC IN connector (BNC) Supply the time code which will serve as the reference[...]

Chapter 2 P arts and their functions 16 5 1 2 4 3 6 2-6 W arning/status display section 2-7 Displa y window and its displa ys Remaining tape and remaining battery charge and audio channel level displays Displays relating to the VTR unit ’ s operations and modes CTL RF S E RVO HUMID SLA CK h T APE EB Y minM s frm 13 24 0 D VTCG TIME D A TE P-iREC [...]

Chapter 2 P arts and their functions 2 17 CTL RF S E RVO HUMID SLA CK h T APE EB Y minM s frm 13 24 0 D VTCG TIME D A TE P-iREC SLA VE HOLD W GPS BA T T EF O VER OV ER 10 OO 40 -dB 30 20 NDF Mode displays W: Lights when the 16:9 aspect ratio mode is established. GPS: Lights when signals cannot be received during GPS operation. GPS : Lights when sig[...]

Chapter 2 P arts and their functions 18 2-8 Viewfinder section ON OFF 2 8 7 ; = < 1 : 9 36 45 > ? @ 1 Viewfinder (optional accessory) While recording or playback is underway, pictures can be viewed through the viewfinder in black and white. The warning displays concerning the unit ’ s operation statuses and settings, messages, zebra pattern[...]

Chapter 3 Recor ding and pla ybac k 3 19 3-1 Cassette tapes Loading a cassette tape 1 Set the POWER switch to ON. <Note> When condensation has formed inside the unit, the HUMID display lights. Wait until this display is cleared before proceeding with the intended operation. Ejecting the cassette tape While the power is still on, press the EJE[...]

Chapter 3 Recor ding and pla ybac k 20 3-2 Basic pr ocedures This section describes the basic steps for shooting and recording. Before actually departing to shoot scenes, carry out inspections to ensure that the system is functioning properly. * For details on how to perform these inspections, refer to “ 6-1 Inspections prior to shooting. ” Fro[...]

Chapter 3 Recor ding and pla ybac k 3 21 Procedure f or shooting From adjusting the white balance and black balance to stopping the recording 1 Select the filter to match the lighting conditions. 2 -1 If the white balance has been stored in the memory ahead of time: Set the WHITE BAL switch to “ A ” or “ B. ” 2 -2 If the white balance and/o[...]

Chapter 3 Recor ding and pla ybac k 22 3-3 Scene-to-scene continuity Maintaining continuity from one scene to the next at an accuracy of +1 frame or less can be assured simply by pressing the VTR START button or VTR button on the lens while the unit is in the rec-pause mode. If the unit is in a mode other than rec-pause, the point at which the scen[...]

Chapter 3 Recor ding and pla ybac k 3 23 3-6 INTER V AL REC function The AJ-SDC905 enables recording in intervals with a minimum recording time in increments of one frame to be conducted. The AJ-SDC615 enables recording in intervals with a recording time of 2 seconds or more to be conducted. In order for this function to be used, it is necessary by[...]

Chapter 3 Recor ding and pla ybac k 24 When recording is to be suspended at any time Press the STOP button. Recording is now suspended. O With the AJ-SDC905 , the tape may continue to run since the unit will record the images stored in the memory until the moment when the button is pressed. When the recording is to be continued Press the unit ’ s[...]

Chapter 3 Recor ding and pla ybac k 3 25 3-7 RET AKE function The RETAKE function ensures continuity with the previous cut on the tape when shooting is resumed. It is set by opening the <REC FUNCTION> screen from the SYSTEM SETTING page and selecting ON as the setting for the RETAKE MODE item by performing menu operations. The RETAKE MODE ite[...]

Chapter 4 Adjustments and settings f or recor ding 26 In order to achieve images with a consistently high picture quality with this unit, it is necessary to adjust the black balance and white balance as the individual conditions demand. To achieve a higher picture quality, it is recommended that the adjustments be performed in the following sequenc[...]

4 Chapter 4 Adjustments and settings f or recor ding 27 When there is no time to adjust the white balance Set the WHITE BAL switch to PRST. The white balance for the filter is achieved in accordance with the setting position of the FILTER control (outer). When the white balance cannot be adjusted automatically When the white balance adjustment was [...]

Chapter 4 Adjustments and settings f or recor ding 28 <Notes> ≥ Check that the lens connector has been connected and that the lens aperture is set to CLOSE. ≥ While the black balance is being adjusted, the aperture is automatically set to the light-shielding status. ≥ While the black balance is being adjusted, the gain selector circuit [...]

4 Chapter 4 Adjustments and settings f or recor ding 29 4-2 Setting the electr onic shutter This section describes the unit ’ s electronic shutter, its settings and operations. 4-2-1 Shutter modes The table below lists the shutter modes in which the unit ’ s electronic shutter can be used as well as the shutter speeds which can be selected. Mod[...]

Chapter 4 Adjustments and settings f or recor ding 30 4-3 Selecting the recor ding signals and recor ding system With this unit, both the signals to be recorded and the recording format can be selected. 4-3-1 Selecting the recording signals Open the <SYSTEM MODE> screen from the SYSTEM SETTING page and select the signals to be recorded using [...]

4 Chapter 4 Adjustments and settings f or recor ding 31 4-4 Selecting the audio input signals and adjusting their recor ding levels When the AUDIO SELECT CH1/CH2 switch is set to AUTO, the recording levels on audio tracks CH1 and CH2 are adjusted automatically. On the other hand, when it is set to MAN, the levels can be adjusted manually. 4-4-1 Sel[...]

Chapter 4 Adjustments and settings f or recor ding 32 Tape continuity with the user bits Selecting REGEN for the UB MODE item on the <TC/UB> screen by performing menu operations will call up the user bits recorded on the tape, making it possible to continue recording from that value. However, it is not possible to record the contents that wer[...]

4 Chapter 4 Adjustments and settings f or recor ding 33 4-5-2 Setting the internal c lock ’ s date and time 1 Set the DISPLAY switch to UB. 2 Press the HOLD button to cause DATE to be displayed in the display window. 4 Set the date (year/month/day) using the SHIFT button, UP (+) button and DOWN ( – ) button. 5 Press the HOLD button to cause TIM[...]

GENLOCK IN TC IN TC OUT MON OUT GENLOCK IN TC IN TC OUT MON OUT TC OUT MON OUT Chapter 4 Adjustments and settings f or recor ding 34 Operating procedure for external locking Follow the steps below for external locking. 1 Set the POWER switch to ON. 2 Set the TCG switch to F-RUN. 4 Supply the reference time code and reference video signal, which are[...]

4 Chapter 4 Adjustments and settings f or recor ding 35 Concerning the user bit setting during external lock When the unit ’ s time code is externally locked, only the time data is locked to the time data of the time code supplied from the external source. This means that the user bits can be set separately for each component. When the <TC/UB&[...]

Chapter 4 Adjustments and settings f or recor ding 36 4-6-2 Basic menu operations Menu items are selected and entered using the MENU button and JOG dial button. The menus have a hierarchical configuration consisting of the main menu, sub menus and setting item menus. The data which has been set is written and saved in a non- volatile memory. The op[...]

4 Chapter 4 Adjustments and settings f or recor ding 37 2 Turn the JOG dial button to move the arrow (cursor) to the item which is to be set, and the sub menu screen appears when the JOG dial button is pressed. 3 Turn the JOG dial button to move the arrow (cursor) to the item which is to be set, and the setting item menu screen appears when the JOG[...]

Chapter 4 Adjustments and settings f or recor ding 38 4-7-2 Vie wfinder screen status display configuration All the items that can be displayed are laid out inside the viewfinder as shown in the figure below. 4-7-3 Selecting the vie wfinder screen display items To select which items are to be displayed on the viewfinder screen, perform menu operati[...]

4 Chapter 4 Adjustments and settings f or recor ding 39 This indicates the master gain setting. Example: LOW = 0 When S.GAIN and DS.GAIN functions have been allocated to the user switches, the corresponding gain values are displayed. The user switch displays do not appear unless the S.GAIN and DS.GAIN functions have been allocated. Display item Wha[...]

Chapter 4 Adjustments and settings f or recor ding 40 Display item What is displayed Status when display appears This appears when the position of the WHITE BAL switch has been changed. “ A, ” “ B ” or “ PRE ” appears at #. VAR ¢ . ¢ K is displayed when channel A, Y is set to VAR. ATW MODE is displayed when ATW is assigned to channel [...]

4 Chapter 4 Adjustments and settings f or recor ding 41 Display item What is displayed Status when display appears 7 Cumulative gain display 6 : /12 : /20 : This indicates the value of the cumulative gain (DS.GAIN) when this gain function is working. 8 Gain value ¢¢ dB This indicates the current gain value. 6 WHITE BAL switch position A B P T Thi[...]

Chapter 4 Adjustments and settings f or recor ding 42 Display item What is displayed Status when display appears E Total length of cassette tape ¢¢¢ min This indicates the total length of the cassette tape. (This appears during a mode check.) F Super iris ON/ super black ON S B SB This appears when S.IRIS has been set to ON. This appears when S.[...]

4 Chapter 4 Adjustments and settings f or recor ding 43 ≤ – – – ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ – – – ≤ ≤ ≤ – ≤ ≤ ≤ – ≤ – ≤ ≤ – – – – ≤ – – ≤ – – ≤ ≤ – – ≤ – – ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ ≤ – ≤ ≤ ≤ ≤ ≤ ≤ ≤ ?[...]

Chapter 4 Adjustments and settings f or recor ding 44 # < VF MARKER > MKR:A TABLE :A CENTER MARK :1 SAFETY ZONE :2 SAFETY AREA :90% FRAME SIG :4:3 FRAME MARK :OFF FLAME LVL :15 # < CAMERA ID > ID1 : ABCDEFGHIJ ID2 : ABCDEFGHIJ ID3 : ABCDEFGHIJ 4-7-6 Setting the camera ID The camera ID is set on the CAMERA ID screen. Up to ten alphanumer[...]

4 Chapter 4 Adjustments and settings f or recor ding 45 4-7-7 Mode chec k screen displa ys (MODE CHECK button function) The screens enabling the unit ’ s settings and modes to be checked can be displayed in the viewfinder. Each time the unit ’ s MODE CHECK button is pressed, one of the four screen displays is selected in the following sequence:[...]

Chapter 4 Adjustments and settings f or recor ding 46 4-8 Menu-driven function setup The functions can be set up using the unit ’ s menus. 4-8-1 Setting the USER SW GAIN s witching In addition to the standard gain settings of L, M and H, the S.GAIN (super gain) mode function that provides an analog gain increase of 30 dB or more and the DS.GAIN ([...]

4 Chapter 4 Adjustments and settings f or recor ding 47 4-8-3 Selecting the F .A UDIO LEVEL contr ol function This function enables the recording level to be adjusted using the F.AUDIO LEVEL control. To select this function, perform menu operations to open the <MIC/AUDIO> screen from the VTR MENU page, and set whether to enable or disable the[...]

Chapter 4 Adjustments and settings f or recor ding 48 AUDIO CH1: The function for switching the channel 1 input signal is allocated. Each press advances the setting through the sequence FRONT > W.L. > REAR. Note that it is also possible to change the setting by operating the AUDIO IN switch. Whichever control is operated last takes precedence[...]

4 Chapter 4 Adjustments and settings f or recor ding 49 4-9-2 Setup card operations To format the setup card, save the setting data on the card or read the saved data from the card, first perform a menu operation to open the <CARD READ/WRITE> screen from the FILE page. Formatting the setup card # < CARD READ/WRITE > R.SELECT :1 READ W.S[...]

Chapter 4 Adjustments and settings f or recor ding 50 4 Turn the JOG dial button to move the arrow (cursor) to the “ TITLE : ” item. 5 When the JOG dial button is pressed, the arrow (cursor) moves to the title input area, and the input mode is established. 7 Press the JOG dial button to enter the character. 8 Turn the JOG dial button to move th[...]

4 Chapter 4 Adjustments and settings f or recor ding 51 READ? YES # NO Loading the data saved on the card 1 Perform the menu operations, and display the “ CARD READ/WRITE ” screen. If the data is given a title when it is saved, the title will also be displayed. 3 Turn the JOG dial button to select any number from 1 to 8, and press the JOG dial [...]

Chapter 4 Adjustments and settings f or recor ding 52 4-9-3 How to use the user data The setting data can be written in the user area of the unit ’ s internal memory and data written in the memory can be read from this area. Use of this data speeds up the process of reproducing suitable setup statuses. To write the data, first perform a menu oper[...]

4 Chapter 4 Adjustments and settings f or recor ding 53 < SCENE > READ USER DATA # SCENE SEL :1 READ WRITE RESET TITLE1 : ******** TITLE2 : ******** TITLE3 : ******** TITLE4 : ******** 3 When the JOG dial button is pressed, the scene file number starts flashing. Turn the JOG dial button to select the scene file whose data is to be loaded. 6 W[...]

Chapter 4 Adjustments and settings f or recor ding 54 RESET? YES # NO < SCENE > READ USER DATA # SCENE SEL :1 READ WRITE RESET TITLE1 : ******** TITLE2 : ******** TITLE3 : ******** TITLE4 : ******** 3 When the JOG dial button is pressed, the scene file number starts flashing. Turn the JOG dial button to select the scene file whose data is to [...]

4 Chapter 4 Adjustments and settings f or recor ding 55 8 When the JOG dial button is pressed, the arrow (cursor) returns to the TITLE1, 2, 3 or 4 item. 9 Turn the JOG dial button to move the arrow (cursor) to the WRITE item. WRITE? YES # NO TITLE: 10 When the JOG dial button is pressed, the following message appears. 12 Press the MENU button to ex[...]

Chapter 4 Adjustments and settings f or recor ding 56 4-9-5 Ho w to return the menus settings to the user standard settings The setting statuses of the unit ’ s menus can be returned to the user standard settings registered in 4-9-3. There are two ways to do this: one method is to read (load) the USER DATA as described in “ 4-9-3 How to use the[...]

Chapter 5 Preparation 5 57 5-1 Supplying the po wer A battery pack or an AC power source can be used as this unit ’ s power supply. To use the battery pack, there is the following choice of makes of batteries: ≥ Panasonic ≥ Anton-Bauer ≥ IDX ≥ PACO ≥ Sony <Notes> ≥ Batteries of other makes can also be supported by changing the s[...]

Chapter 5 Preparation 58 Using the BP-90 type battery pack 1 Remove the battery holder. Battery holder 2 Attach the battery case to the unit. 1 Connect the unit ’ s cable with the cable of the BP-90 type battery case. 2 Use a screwdriver to attach the BP-90 type battery case to the unit. The holes for tightening the screws can be seen when the co[...]

Chapter 5 Preparation 5 59 Using the NP-1 type battery pack Using the V-mount type battery pack Attach the V-mount adapter plate. Insert it in the direction shown by the arrows, and slide it into place. 1 Remove the battery holder. 2 Attach the NP-1 type battery case to the unit. 1 Tighten the mounting screws. 2 Tighten the power contact screws. 3 [...]

Chapter 5 Preparation 60 5-1-2 Using an A C po wer supply When the AJ-B75 AC adapter made by Panasonic is used 1 Connect the DC OUT connector on the AJ-B75 AC adapter to the DC IN socket on the unit. 2 Set the power of the AC adapter to ON. 3 Set the unit ’ s power switch to ON. When using an external power supply other than the AJ- B75 AC adapte[...]

Chapter 5 Preparation 5 61 5 Proceed with the flange back adjustment for the lens. <Notes> ≥ For details on how to handle the lens, refer to the operating instructions of the lens. ≥ While the lens is removed, attach the mount cap to protect the unit. 5-3 Attaching the lens and perf orming the flange back and white shading adjustments Att[...]

Chapter 5 Preparation 62 1 Attach the lens to the camera. At this stage, do not forget to connect the lens cable. 2 Set the lens aperture to manual and open the aperture. 3 Set the lighting in such a way that the appropriate video output level is achieved at a distance of about 3 meters away from the chart used for the flange back adjustment. If th[...]

Chapter 5 Preparation 5 63 < WHITE SHADING > CORRECT :ON # DETECTION(V.SAW) 8 1 Set the WHITE BAL selector switch to “ A ” or “ B, ” and use the AUTO W/B BAL switch to adjust the white balance automatically (AWB). 2 Use the AUTO W/B BAL switch to adjust the black balance automatically (ABB). 3 Again, use the AUTO W/B BAL switch to adj[...]

Chapter 5 Preparation 64 < LENS FILE > # FILE NO. :1 READ WRITE TITLE : ************ 1: 5: 2: 6: 3: 7: 4: 8: Selecting the file No. 1 Perform a menu operation to open the <LENS FILE> screen from the FILE page, and turn the JOG dial button to move the arrow (cursor) to the FILE NO. item. 2 When the JOG dial button is pressed, the file nu[...]

Chapter 5 Preparation 5 65 4 Turn the JOG dial button to move the arrow (cursor) to YES, and press the JOG dial button. When reading is complete, “ READ OK ” is displayed, indicating that the lens file data has been read from memory. 5 Press the MENU button to exit the menu operations. Reading the lens file data 1 Refer to steps 1 to 3 in “ S[...]

Chapter 5 Preparation 66 5-4 A udio input signal preparations Prepare to connect the audio components which will supply the audio signals to the unit. 5-4-1 When using the fr ont microphone The microphone of the AJ-MC700P mic kit (optional accessory) can be attached to the viewfinder. 5-4-2 When using an e xternal microphone First attach the AJ-MH7[...]

Chapter 5 Preparation 5 67 5-4-3 When using a wireless receiver When using an externally connected wireless receiver Attach the wireless receiver when a wireless system is to be used. 5-4-4 When using an audio component 1 Attach the wireless receiver to the camera attachment. 1 Connect the AUDIO IN connectors on the camera with the audio component [...]

Chapter 5 Preparation 68 Slide lever 1 Mount the tripod attachment on the tripod. <Note> Take account of the center of gravity of the unit and that of the tripod attachment when selecting the attachment hole. Check that the diameter of the hole selected matches the diameter of the tripod head screw. 2 Mount the unit on the tripod attachment. [...]

Chapter 5 Preparation 5 69 5-8 Attaching the rain co ver Example showing use of the SHAN-RC700 rain cover <Notes> ≥ Before connecting or disconnecting the dedicated cable, be absolutely sure to set the POWER switches on the unit and the AJ-EC3P to OFF. ≥ If the ECU DATA SAVE item on the <SW MODE> screen is set to OFF, the camera rel[...]

Chapter 6 Maintenance and inspections 70 6-1 Inspections prior to shooting Before setting off for a shooting session, perform the following inspections to verify that the system is functioning correctly. It is recommended that a color video monitor be used to check the images. 6-1-1 Preparation for inspections 6-1-2 Inspecting the camera unit 1 Ins[...]

6 Chapter 6 Maintenance and inspections 71 6-1-3 Inspecting the VTR unit Perform all the steps outlined in section “ 1. Tape travel inspection ” through section “ 4. Earphone and speaker inspection ” one after the other. 1. Tape travel inspection 1 Set the VTR SAVE/STBY switch to SAVE, and check that the VTR SAVE lamp inside the viewfinder [...]

Chapter 6 Maintenance and inspections 72 5. Inspection using external microphones 1 Connect external microphones to the AUDIO IN CH1 and CH2 jacks. 2 Set the AUDIO IN CH1 and CH2 switches to REAR. 3 Set the LINE/MIC/+48V selector switch on the back panel to MIC or +48V in accordance with the external mic ’ s power supply type. MIC : Internal powe[...]

6 Chapter 6 Maintenance and inspections 73 6-2 Maintenance 6-2-1 Condensation The water vapor in the air may form as tiny droplets on the head drum when the unit is moved from a cold location to a warm location or used in a very humid place. This phenomenon is known as condensation, and running the tape under these conditions is liable to cause the[...]

Chapter 6 Maintenance and inspections 74 6-2-6 Connectors and signals A UDIO IN 1 GND 2 A UDIO IN(H) 3 A UDIO IN(C) Matsushita part number K1AB103A0007 Maker part number HA16PRM-3SG (Hirose Denki) PUSH 1 3 2 FRONT MIC IN 1 GND 2 A UDIO IN(H) 3 A UDIO IN(C) Matsushita part number K1AB103B0013 Maker part number NC3FBH2 (NEUTRIK) PUSH 1 3 2 DC IN 1 GN[...]

6 Chapter 6 Maintenance and inspections 75 6-3 W arning system 6-3-1 W arning description tables When an error or a problem is detected immediately after the power is turned on or while an operation is underway, the WARNING lamp and lamps inside the viewfinder serve to alert the user. <Note> Items are displayed in the following sequence of pr[...]

Chapter 6 Maintenance and inspections 76 6. SER V O 5. HUMID 9. WIRELESS RF 7. RF WARNING lamp Lights for 90 minutes following the release of the condensation detection after the condensation formation was detected. Indications on LCD screen “ HUMID ” display lights if condensation is detected. “ HUMID ” display flashes for an additional 10[...]

6 Chapter 6 Maintenance and inspections 77 6-3-2 Error codes One of the following error codes appears in the display window when an error has occurred in the unit for some reason. 10. B A TTER Y NEAR END 11. T APE NEAR END WARNING lamp Flashes once a second (during recording). Indications on LCD screen The bar display that shows the remaining tape [...]

Chapter 6 Maintenance and inspections 78 6-3-3 Emergency eject If the cassette cannot be ejected by pressing the EJECT button, use a screwdriver or similar tool to press and turn the emergency eject screw. This enables the cassette to be removed. 1 Set the power to OFF. 4 Remove the cassette. 5 Return the rubber cap to its original position. 2 Remo[...]

7 Chapter 7 Menu description tab les 79 USER MENU USER MENU SELECT SYSTEM SETTING PAINT OPERATION SYSTEM MODE OPTION MODE REC FUNCTION OUTPUT SEL GENLOCK ROP LOW SETTING MID SETTING CAMERA ID SHUTTER SPEED SHUTTER SELECT USER SW SW MODE WHITE BALANCE MODE IRIS FLARE USER SW GAIN MATRIX COLOR CORRECTION SYSTEM(USER) PAINT(USER) VF(USER) OPERATION(US[...]

Chapter 7 Menu description tab les 80 REC TALLY RED GREEN CHAR For selecting the method used to inform the user that the unit is recording when a system using an extender or other device is configured and BOTH is selected as the 26- PIN CONTROL menu item setting while the system is used in the remote control mode. RED: The red tally lamp lights. GR[...]

7 Chapter 7 Menu description tab les 81 Item/ Data storage Variable range Remarks P.OFF GPS DATA HOLD CLEAR For selecting whether or not to hold the UMID GPS position information while the power is off and record the information as the data still held as the previous value until another measurement can be taken after the power is next turned on. HO[...]

Chapter 7 Menu description tab les 82 SDC615 00h00m02s00f : 00h04m59s29f : 23h59m59s29f The shortest time is two seconds. CU F INTERVAL REC MODE ON ONE SHOT OFF For setting the INTERVAL REC function. ON (MEMORY): Interval recording is possible in single- frame units using memory. ONE SHOT: Recording is performed only once for the time set in the RE[...]

7 Chapter 7 Menu description tab les 83 Item/ Data storage Variable range Remarks 7-2-4 OUTPUT SEL SC PHASE FINE – 75 : +00 : +75 For finely adjusting the SD phase during genlock. <Note> When making GENLOCK adjustments to the unit, adjust H PHASE first, followed by SC PHASE. Item/ Data storage Variable range Remarks GENLOCK INT EXT 26P EXT [...]

Chapter 7 Menu description tab les 84 7-3-2 MA TRIX R GAIN – 200 : +000 : +200 For setting the R channel gain. Item/ Data storage Variable range Remarks MASTER PED – 200 : +000 : +200 For setting the master pedestal level. MASTER DTL – 31 : +00 : +31 For setting the H detail/V detail level. MASTER GAMMA 0.35 : 0.45 : 0.75 For setting the mast[...]

7 Chapter 7 Menu description tab les 85 Mg (SAT/PHASE) – 63 : +00 : +63 For performing the magenta color correction (saturation and hue). R (SAT/PHASE) – 63 : +00 : +63 For performing the red color correction (saturation and hue). R-Mg (SAT/PHASE) – 63 : +00 : +63 For performing the color correction (saturation and hue) between red and magent[...]

Chapter 7 Menu description tab les 86 7-3-5 MID SETTING $ MATRIX TABLE OFF A B For selecting the color correction table. $ COLOR CORRECT ON OFF For selecting ON or OFF for the color correction. Item/ Data storage Variable range Remarks $ MASTER GAIN – 3dB : 9dB : 30dB For setting the master gain to – 3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27 or 30 [...]

7 Chapter 7 Menu description tab les 87 7-3-7 ADDITIONAL DTL Item/ Data storage Variable range Remarks KNEE APE LVL OFF 1 2 : 5 For performing the KNEE APE LEVEL setting. CHROMA DTL OFF 1 : 5 For performing the CHROMA DTL setting. The chroma edge is detected and placed on the Y signal to bolster H.DTL. The higher the number, the greater the correct[...]

Chapter 7 Menu description tab les 88 7-3-9 KNEE/LEVEL Item/ Data storage Variable range Remarks MASTER PED – 200 : +000 : +200 For performing the MASTER PEDESTAL setting. $ MANUAL KNEE ON OFF For setting the mode which is to be established when the AUTO KNEE switch is at OFF. The KNEE POINT/SLOPE setting value is active when ON is selected. KNEE[...]

7 Chapter 7 Menu description tab les 89 Item/ Data storage Variable range Remarks DETAIL ON OFF For selecting ON or OFF for DTL (H, V). 2D LPF ON OFF For selecting ON or OFF for the 2- dimensional LPF that reduces cross color. HIGH COLOR ON OFF For selecting ON or OFF for the mode in which the dynamic range of the colors is expanded. TEST SAW ON OF[...]

Chapter 7 Menu description tab les 90 7-4-2 VF MARKER Item/ Data storage Variable range Remarks TABLE A B For selecting the VF MARKER setting table. This item is used to set the current values of table A or B which have been selected using the menu items listed below. CENTER MARK OFF 1 2 3 4 For selecting the center marker. OFF: The center marker i[...]

7 Chapter 7 Menu description tab les 91 D.ZOOM ON OFF For selecting whether or not the display is to come on during digital zoom operations. 7-4-5 VF INDICA T OR2 Item/ Data storage Variable range Remarks TAPE ON OFF For selecting ON or OFF for the remaining tape amount display. BATTERY ON OFF For selecting ON or OFF for the battery voltage display[...]

Chapter 7 Menu description tab les 92 7-5-2 SHUTTER SPEED Item/ Data storage Variable range Remarks SYNCHRO SCAN ON OFF For selecting SYNCHRO SCAN as the shutter speed to be used. SUPER V ON OFF For selecting SUPER V as the shutter speed to be used. POSITION1 ON OFF For selecting POSITION1 as the shutter speed to be used. POSITION2 ON OFF For selec[...]

7 Chapter 7 Menu description tab les 93 7-5-4 USER SW Item/ Data storage Variable range Remarks USER MAIN SW INH S.GAIN DS.GAIN S.IRIS I.OVR S.BLK B.STR AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW ATW D.ZOOM For allocating the USER MAIN switch function. USER1 SW INH S.GAIN DS.GAIN S.IRIS I.OVR S.BLK B.STR AUDIO CH1 AUDIO CH2 REC SW Y GET RET SW ATW D.Z[...]

Chapter 7 Menu description tab les 94 7-5-6 WHITE B ALANCE MODE AWB B MEM ATW VAR For selecting the allocation of the WHITE BAL switch position and Bch. MEM: The switch position and Bch are allocated as memory values when AWB is executed. ATW: The position and Bch are allocated as ATW start switch functions. VAR: The color temperature of B can be s[...]

7 Chapter 7 Menu description tab les 95 7-5-8 IRIS 7-6 FILE 7-6-1 CARD READ/WRITE TITLE1 - 8: For setting a title consisting of not more than 8 characters. Item/ Data storage Variable range Remarks R.SELECT 1 : 8 For selecting the number of the file whose data is to be read. READ For reading the data on the setup card. WRITE For writing the camera [...]

Chapter 7 Menu description tab les 96 7-6-3 LENS FILE Item/ Data storage Variable range Remarks FILE NO. 1 : 8 For selecting the number of the lens file. READ For reading the data from the lens file. WRITE For writing the data in the lens file. TITLE 1-8 ************ For setting a title consisting of not more than 12 characters. 7-6-4 SCENE Item/ D[...]

7 Chapter 7 Menu description tab les 97 7-8 VTR MENU 7-8-1 VTR FUNCTION ECU REC CHK SW R.REVIEW RETAKE For setting the unit ’ s operation to be performed using the REC check button on the ECU. R.REVIEW: The rec-review operation is performed. RETAKE: The retake operation is performed, after which playback is initiated automatically. Item/ Data sto[...]

Chapter 7 Menu description tab les 98 BATTERY SELECT PRO14 TRIM14 HYTRON50 HYTRON100 HYTRON120 DIONIC90 DIONIC160 HP-90L BP-H120 NP-L50 ENDURA50 ENDURA80 BP-L60/90 NiCd14 NiCd13 NiCd12 TYPE A TYPE B For selecting the type of battery to be used. The remaining charge is detected in accordance with the battery which has been selected. The variable ran[...]

7 Chapter 7 Menu description tab les 99 HYTRON120 2 / AUTO MANUAL For enabling or disabling the selection made for the BATTERY SELECT item. 2 : The selection is enabled. /: The selection is disabled. For selecting how the voltage at which the battery charge is considered nearly depleted is to be set. AUTO: The voltage is set automatically. MANUAL: [...]

Chapter 7 Menu description tab les 100 Item/ Data storage Variable range Remarks Item/ Data storage Variable range Remarks 7-8-4 B A TTER Y SETTING2 ENDURA80 2 / AUTO MANUAL For enabling or disabling the selection made for the BATTERY SELECT item. 2 : The selection is enabled. /: The selection is disabled. For selecting how the voltage at which the[...]

7 Chapter 7 Menu description tab les 101 7-8-5 MIC/A UDIO1 TEST TONE NORMAL ALWAYS OFF CHSEL For selecting the test signal. NORMAL: The test tone signal is output to all the channels when the CAM/BAR switch has been set to BAR and the CH1 AUDIO IN switch has been set to FRONT. ALWAYS: The test tone signal is always output to all the channels when t[...]

Chapter 7 Menu description tab les 102 The underlining in the variable range column indicates the setting in the preset mode. 7-8-7 TC/UB Item/ Data storage Variable range Remarks UB MODE USER TIME DATE EXT TCG FRM RATE REGEN For selecting the UB mode. USER: Selects the UB value set in the LCD section. TIME: Selects the local time (hour, minute, se[...]

7 Chapter 7 Menu description tab les 103 7-8-8 UMID SET/INFO DEVICE NODE For displaying the ID number of the product. Item/ Data storage Variable range Remarks COUNTRY NO-INFO For inputting the name of the user ’ s country. “ NO-INFO ” is displayed until this is input. ORGANIZATION NO-INFO For inputting the name of the user ’ s organization[...]

Chapter 7 Menu description tab les 104 7-9 OPTION MENU 7-9-1 OPTION Item/ Data storage Variable range Remarks ENG SECURITY ON OFF For selecting whether or not to place a restriction on the opening and closing of the MENU screen. ON: The MENU screen can no longer be opened. To release this restriction, consult your nearest service center. OFF: No re[...]

Chapter 8 Specifications 8 105 Power supply: DC 12 V (11.0 - 17.0 V) Power consumption: 24 W 25 W SDC905 SDC615 indicates safety information. [GENERAL] Ambient operating temperature: 32°F to 104°F (0°C to +40°C) Storage temperature: –4°F to 140°F (–20°C to +60°C) Ambient operating humidity: Within 10% to 85% (relative humidity) Continuo[...]

Chapter 8 Specifications 106 T ape T ransport System Tape speed: DVCPRO: 33.820 mm/sec DVCPRO 50 : 67.640 mm/sec Recording time: DVCPRO: 66 minutes (when AJ-P66MP is used) DVCPRO 50 : 33 minutes (when AJ-5P33MP is used) Fast forwarding time: Approx. 1 min. 30 sec. (when AJ-P66MP is used) Approx. 1 min. 30 sec. (when AJ-5P33MP is used) Rewinding tim[...]

Memo[...]

PANASONIC BROADCAST & TELEVISION SYSTEMS COMPANY UNIT COMPANY OF MATSUSHITA ELECTRIC CORPORATION OF AMERICA Executive Office: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7000 EASTERN ZONE: One Panasonic Way 4E-7, Secaucus, NJ 07094 (201) 348-7621 Southeast Region: 1225 Northbrook Parkway, Ste 1-160, Suwanee, GA 30024 (770) 338-6835 Cen[...]