Optiview TRKPTZ-18NX инструкция обслуживания

Auto Zooming T racking Dome Cameras User Manual[...]

Auto Zoo ming T ra cking D ome Camera User Manual 1 Contents Section1 Instru ction ..................................................................... 3 1.1 Productio n Introducing ................................................... 3 1.2 Character ....................................................................... 3 1.3 Function Description [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 2 3.6.4 Passw ord Setting ............................................... 41 3.6.5 W indows Blanking ............................................. 43 3.6.6 Set W indows ...................................................... 44 3.6.7 Edit W indows Locat ion ...................................... 45 3[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 3 Section1 Instruction 1.1 Production Introducing The dome cameras feature high position resolution, high speed, low price and select able com munication protocol s; Widely used in surveillanc e system. 1.2 Character  Built-in English OSD Menu, by which you can change dome paramete r, set or call[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 4  The features p asswor d protection to prevent unauthorized changes to the dome set ting.  A set window ca n be reversed so that it is the on ly visible tilt area of the scene. ll other part s of t he tilt area of the scen e will be blanked.  Revolutionary motion trac king technology make[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 5 is a large a mount of zoom . (4) Auto Flip When the dome camera tilts downw ard and goes just beyond the vertica l, the dome camera rot ates 180 degrees automatica lly . Afterw ards, the dome camera start s moving upward even you still hold joystick in the down position. Once you let go of the joy[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 6  Focus can b e manually controlled via keyboard or matrix, ple ase refer to con trol keyboard or matrix operation manual for detailed oper ation.  When on manual focus st atus, operations such as adjusting pos itions or pres et setting will r esume the camera to auto focus stat us. The camer[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 7 Camera can automatically adjust white ba lance acc ording to the alteration of backgrou nd lightness to give a true color im age. (9) Backlight Compensati on (BLC) If a bright backlight prese nts, the subjects in the pict ure may appear dar k or as a silhou ette. Backlig ht compensat ion enhances [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 8 Make the do me random s can 360º rang e in the current position. (15) Frame Scan This feature freezes the scene on t he monitor w hen going to a preset. This al lows for smooth tr ansition from one preset scen e to another. (16) Zones Setting A zone is a pan area, defined by a left and right limi[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 9 A set wind ow can be reve rsed so that it is the o nly visible tilt area of the scene. All othe r parts of the tilt area of th e scene w ill be blanked. NOTE: Be t he same with onl y the model of TRKPT Z-18NX, TRKPTZ -26 NX, TRKPTZ -18NX, TRKPT Z-26NX. (20) Auto tr acking Revolutionary motion trac[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 10 Model TRKPTZ- 1801 TRKPTZ- 1802 TRKPTZ- 1803 TRKP TZ - 22 00PT TRKPTZ- 22 X TRKPTZ- 23 X Signal For mat P AL/NTSC Image Sensor ¼ inch color CCD Horizont al Resolut ion 480 TVL Vide o Out 1.0±0.2V P-P P/T S peed Pan:0.05º ～ 240 º/sec;T ilt:0.03º ～ 1 60º/sec S/N Ratio ≥ 50DB Sensitivity[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 11 Optical Zoom 18X 22X 23X Digital Zoom 12X 8X Panning Range Pan: 360º Continuous;T ilt:-5º ～ 92 º Preset Number 256 Auto Cruise Auto switc h from 1 to 30 p reset positio n sequentially Patterns 4 Zone 8 Alarm input 4 Alarm output 2 W indow s blanking 8 Interface RS - 485 Baud Rate 1200bps , 2[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 12 Section 2 Normal Operat ion These operating instructions cover the basic o peration of the dome and it s features. W h en the dome is used with other manufactur ers ‟ control sy stem , pleas e refer to t he system controller ‟ s instructions. In the ev ent of specia l requirement s outside th[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 13 dome will c alls these p arameters saved in me moriy and adjust Pan/T ilt/Zoom of the camera to that position. Extended Presets Note : For others dynamics controllers with on ly 64 or 40 presets. On the menu of PRESET S NUMBER, set it as 64 or 40. Then y ou can use preset s listed in „ Presets [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 14 manual. Please refer to the insta llation packet supplied with the back box for i nsta llation instr uctions. After i nst alled properly , power up the camera. It wi ll start a configurati on sequence. After the configuration is done, the monitor wi ll display as be low . PTOL ： PELCO- D COMM ?[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 15 3.1 Main Menu Set 95# pr eset to access m ain me nu. Figure 3.1 MAI N MEN U Access other OSD menus : (1) Move the joystick up or down to position t he cursor beside others OSD menu s. (2) Press ir is Open to con firm selecti on. 3.2 Select Language The language for the on-screen menus is selectab[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 16 (3) Move the joystic k up or down to view select ions. Press iris Open to confirm selection. All on-screen menus are changed into the se lected language . 3.3 System Information Move joystick to select <system in formation>, press Open to confirm the sy stem information menu shown as Fig 3.[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 17 (2) Press ir is Open. 3.4 Display Setup 3.4.1 Display Setup Move j oystick to select <DISPLA Y SETUP>, press Open to enter the dis play setup menu sh own as Fig3.3. Figure 3.3 DISPLA Y SETUP Display setup enables you to progra m how labels are displayed o n the monitor . The f ollowing labe[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 18 ratio labe l is display ed when zoom is activated. Azimuth/elev ation and direction labels are displayed when pan/ti lt is activated. The dome label is display ed when the dome label is activ ated. The follow ing settings are available fo e each label: OFF: Th e label is not displayed when act iv[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 19 3.5 Dome Settings 1 3.5.1 Dome Settings 1 Move joystick t o select <DOME SET TING 1>, press Open to enter the do me setting1 menu shown as F ig3.5. Figure 3.5 D ome settings 1 3.5.2 Camera Settings Mov e joystick to sel ect <CA ME RA>, press Open to enter the camera menu shown as Fig3[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 20 Figure 3.6 CAM ERA ZOOM LIMI T : Zoom limit enables you to define a limitation on zooming times . BACKLIGH T COM PENSA TION (BLC): If a bright backlight prese nts, the subjects in the pict ure may appear dar k or as a silhou ette. Backlig ht compensat ion enhances o bjects in the center of t he p[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 21 Figure 3.7A PROGRAM AE COR TROL Figure 3.7 B PROGRAM AE COR TROL Note: Figure 1.7A shows program AE mode, it is only f or models names TRKPTZ18XX and TRKPTZ2 6XX. Fi gure 1.7B shows progra m AE mode, it is only for models na med TRKPTZ22XX and TRKPTZ2 3XXPNT . ( Ⅰ ) Figure 3.7A PROGR AM AE MODE[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 22 LOW LIG HT LIMIT Low light limit is the maximum duration, it is in fractions of a second, that electronic shutter will remain open in low light conditions. The default set ting is 1/50. Settings include:1/2, 1/3, 1/6, 1 /12, 1/25, 1/50, 1/7 5, 1/100, 1/120, 1/15 0, 1/215, 1/30 0, 1/425, 1/600, 1/[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 23 AU+DSS+I R1, AU+DSS+ IR2, AU+DSS+IR3, SHUTTER PR, IRIS PRIO, and A GC P RIORI. IR CUT FIL TER Settings in clude: IN and OUT . LOW LIG HT LIMIT Settings in clude: 1/1.5, 1/ 3, 1/6, 1/12, 1/25, 1/50. SHUTTE R Settings include: 1/30000, 1/10000, 1/4000, 1/2000, 1/1000, 1/500, 1/250, 1/150, 1/100 , 1[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 24 Figure 3.8A OTHER ME NU Figure 3.8 B OTHER ME NU Note: Figure 3.8A shows Other Menu only f or models na med TRKPTZ18XX and TRKPT Z26XX. Figure 3.8B shows Other Menu only for t he models n amed TRKPTZ22XX an d TRKPTZ23XX . A UTO IRIS : Auto iris is the lens funct ion that automatic ally opens and [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 25 closes the ir is in response to changing l ight conditio ns. Program the auto i ris to operate automatically or at a user -define d level. OFF: Auto iris is disab led, and for manually control only . AUT O: Th e i ris is adju sted auto matically to produce a consta nt video output as det ermined [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 26 change the v alue, the co lor changes on your monitor . 3.5.3 Motion Setting Move joystick t o select <MOTION >, pre ss Op en to enter t he motion me nu shown as F ig3.9. FIGURE 3.9 MO TION MENU A UTO FILP : When the dome camera tilts downwar d and goes just beyond the vertica l, the dome c[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 27 PROPO RTIONA L P AN: Proportion al pan auto matically reduces or incre ases the p an and tilt speed s in proporti on to the z ooming times. At telephoto zoom settings, the pa n and tilt spee ds will be slower for a giv en amount of joy stick de flection then at w ide zoom sett ings. This keeps th[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 28 P ANTTERN 3: Dome runs p attern3. P ANTTERN4: D ome runs p attern4. SCAN SPEED : Scan speed is that the dome will pan when in a FRAME SCAN mode. Scan speed is adjustable from 1 to 32 v ia the programming menu. SET SCA N STOPS : Set Scan S tops are progr ammable stops that lim it the pan range of [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 29 (3) Follow t he directions d isplayed o n the monitor . SET AZIMUTH Z ERO : Azimuth is the pan angle from 0 ° to 359 ° .Az imuth zero is the pan position you specify to be the 0 ° point. Azimuth zero is normally set to magnetic north. Once set, azimuth and compa ss readings ar e based on the s[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 30 This setting defines a specific activity (scan, preset, pattern) to be perfor m ed after the do me is powered up. Following s ettings are av ailable: NONE (de fault): No act ion. AUT O SCAN: D ome start s auto scan operat i on. RANDOM S CAN: Dom e start s random scan op eration. FRAME S CAN: Dome[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 31 (1) Select pre set number : a. Move joystick to position the cursor besid e PRESET NUMMBE R, press iris Op en. b. Move the joystick up or down to view selections. Press iris Open t o confirm sel ection. (2) Edit pres et label. a. Move j oystick to position the cursor beside EDIT Preset label. b. [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 32 (3) Edit pres et scene : a. Move joystick to position the cursor beside EDIT PRESET SCE NE. b. Press iris Open. c. Follow t he direction d isplayed o n the monitor . (4) Clear a pre set: a. Mov e joystick to position the cursor beside CLEAR PRESET . b. Press ir is Ope n. c. Follow t he direction [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 33 (2) Move the joystic k up or down to view select ions. Press iris Open t o confirm sel ection. (3) Move joystick to pos ition the cursor beside PROGRAM P A TTERN. (4) Press ir is Open. (5) Follow t he directions d isplayed o n the monitor . After a pattern is programmed, the remaining storage per[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 34 A zone is pan area, defined by a left and right limit on the 360 -degree pan plane. There are altogether eight zones, each can be with a 6-c haracter label. TO program a zo ne : (1) Move joystick to positio n the cursor besid e ZONE NUMBER. Press iris Op en. (2) Move the joystic k up or down to v[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 35 (3) Mov e joystick to positi on the cursor beside a character . Press iris Open to confirm select ion. T o clear a character , position the c ursor besid e BP , and then pr ess iris Op en. (4) W hen a label is input ted, move the cursor to Ok, then press iris O pen to sav e and return to the Pres[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 36 ZONES sect ion. C LEAR PRESETS: Clear all presets. T o clear a specific preset, please refer to the PRESE TS section. CLEA R P A TTERNS: Clear all patterns. T o clear a specific pattern, please ref er to the P A TTERNS s ection. RESTO RE F ACTO RY DEF A UL TS: This is to rest ore leaving-f actory[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 37 Figure 3.17 DOME SET TINGS 3.6.1 Alarms Move joystick to select <ALARMS>, then press Open to enter the alar ms menu shown as F ig 3.18. Figure 3.18 ALARMS The dome has seven alarm inputs, which can be programmed as hi gh, medium or low priority . W hen an alarm is received, the inputted sig[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 38 This is the length of time the do me consi ders the alarm to be active aft er it has phy sically cleared. 3.6.2 Alarms Setting Move joystick to select <ALARM NUMBER>, then press Open to enter the alar m number men u shown as F ig 3.19. Figure 3.19 ALARM SETTINGS Follow below steps to progra[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 39 (2) Press ir is Open. (3) Move the joystick up or down to view the available selections. Av ailable settings include HIGH, MEDIUM, and LO W (default). If multiple alarms with differe nt prioritie s are active at the same time, the dome will only go to the alarms with the highest pri ority . (4) P[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 40 Set auxili ary to acti vate: (1) Move joystick to position the cursor beside A CTIV A TE AUX. (2) Press iris Open. (3) Move the joystick up or down to view the followin g available sel ections. OFF (default): Not activ ated. 1:An alarm action will close AU X 1. 2: AN alarm action will close AUX 2[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 41 Figure 3.20 AUX An auxiliary output is a programma ble signal from the do me back box that can trigger another device to operate. An auxiliary out put is progra mm able to trigger from an alarm or from a controller . An AUX 1 command from the controller will place a ground at the output of AUX 2 [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 42 Figure 3.21 P ASSWORE D This sett ing protect s i t fr om unauthorized changes to the dome settings. ENABLE P ASSWORD : Open or close the passw ord feature s. EDIT P ASSWORD (Four Numbers) : Figure 3.22 EDIT P ASSWORD (1) Move joystick to position the cursor beside a number . Press iris Op en to [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 43 3.6.5 Windows Blanking Move joystick to select <W INDO W S BL ANKING>, then press Open to enter the windows blanking menu shown as Fig 3.23. Figure 3.22 W INDO W S BLANKI NG Window blan king en ables you to program u p to eight, four-sided, user-defined a reas that cann ot be viewe d by the[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 44 Blanking Parameter s: BLANK ALL ABOVE BLANK ALL BELOW OFF No Blan king OFF No Blan king 0 -5º~10º 0 5º~92º 10 -5º~25º 10 -5º~92º 20 -5º~35º 20 5º~92º 30 -5º~45º 30 15 º~92º 40 -5º~55º 40 25 º~92º 50 -5º~65º 50 35 º~92º 60 -5º~75º 60 45 º~92º 70 -5º~85º 70 55 º~92º [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 45 blanking <Edit window z oom>: set the zoom of the blanki ng. The blanking will take eff ect when the video is zoomed to this time or above. Enable W indows: Enab le or disable the current b lanking Clear window s: clear the current w indows blanking Operation : 1. Move joy stick to select a[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 46 2. From the menu of Fig. 3.25, press Close to return to the menu of F ig 3.24 3. From the menu of Fig. 3.25, press Open to enter menu of Fig 3.26 to edit the windo ws location. Figure 3.26 EDIT W INDO W LO CA TION 4. From the EDIT WINDO W LOCA TION m enu shown in Fig 3.26 ： Move joy stick left;[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 47 Press Close t o discard the setting an d return to Fig 3.24 Press Open to save the setting and return to Fig 3.24. 3.6.9 Heater Setting From the dome setting 2 m enu shown in Fig3.17, move joystick and move cursor to HEA TER SETTING , press Open to enter the fo llowing menu (Figure 3.28). Figure [...]

Auto Zoo ming T racking Dome Ca mera User Manua l 48 T emperature set is to set t he heater ‟ s st artup temperat ure. Operations: 1. Move joy stick to select an i tem. 2. Press Open. 3. Move the stick to select a p arameter . 4. Press Open. 3.6.10 Cruise Setting From the menu shown in Fig3.17, move joystick to sel ect <CRUISE SETTING>, pre[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 49 1 ON 0 OFF: N ote, they are not changeab le, 1234567890: display info, not changeable. When the preset list is 1, “ 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 ” i ndicates preset s from 1 ~ 10. When it is 2, it indicates presets from 1 1 ~ 20. When it is 3, it indicates preset s from 21 ~ 30. 0 0 0 0 0 1 0[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 50 Size SNS: the size of the target i n the screen, Mediu m, Large, Smal l are select able GRA Y SNS: the sensitivity of the moving object, Medium, High and Low are select able LOST AC: the action when the mov ing object is lost. Parameters include: ret urn home and tracking, ke ep tracking, stop tr[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 51 3.6.12 T ra cking Boundary From the menu i n Fig3.30, move the cursor t o < TRACKING BOUNDR A Y >, press Open to enter the f ollowin g menu (Figure 3.31) Figure 3.31 TRACKING BOUNDAR Y BOUNDAR LI MIT : enable / disable the bo undary CLEAR BOUNDARY : clear setting of the curr ent bou ndary L[...]

Auto Zoo ming T racking Dome Ca mera User Manua l 52 3.7 Dome Label From the menu shown in Fig3.1, move the cursor to <DOME LABEL>, press Open to enter the fol lowing menu (Figure .32) Figure 3.32 DOME LABL E <EDIT DOME LABEL>: T o edit the dome descript ion and information. Please re fer to 3.5.4 Ed it Preset Labe l ” . <CLEAR DOM[...]