Northern Industrial 14226 инструкция обслуживания

2800 Southcross Drive West, PO Box 1219 Burnsville, MN 55337, USA ELECTRIC HOIST It em# 14 226 It em # 14230 It em # 14226 0 I tem # 1422 62 ASSEMBL Y AND OPERA TING INSTRUCTIONS Read carefully and understand all ASSEMBL Y AND OPERA TION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result [...]

PRODUCT SPECIFICA TIONS Mode l L o ad cap aci ty L ifti ng h ei ght L ifti ng s pee d Cable le ngth Cabl e di amete r Resi ster ca b le Duty circle V ol tage Moto r perfo rmance H GS2 2 0/4 4 0L B HGS550/1 100LB HGS750/1500LB HGS1000/2000LB Stand ard ve rsio n With pulley Hoo k 220l b 36f t 33f t/min 39f t ≥ 154 0lb S3 20%-1 0min 1 10V/6 0Hz 3/ 4[...]

ELECTRICAL SAFETY 4. Grounded tools must be plugged into an outlet properly inst alled and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way . Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the t[...]

12. A void accidental st ar ting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents. 13. Remove adjusting keys or wrenches be fore turning the power tool on. A wrench or a key that is left attached to a rot ating p art[...]

22. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 23. T ool service must be performed only by qualified rep air personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury . [...]

Additional Specific Safety Rules 10. Do not exceed the maximum lif t cap acity . The application, size and type of load, the attachment s to be used and the period of use must be taken into account. 11. Do not st and under hoisted loads. 12. Do not operated the Hoist in wet c onditions. Do not a llow the Hoist to freeze. 13. If pushing the lif t bu[...]

WA R N I N G ! People with pacemakers should consult thei r physician(s) before using this product. Operation of electrical equipm ent in close proximity to a heart pacemaker could cause interference or failure of the pacemaker . GROUNDING WA R N I N G ! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a[...]

DOUBLE INSULA TED TOOLS: T OOLS WITH TWO PRONG PLUGS 4. T ools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwrit ers Laboratories, In c., the Canadian S tandard Association, and the National Electrical Code. ([...]

6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W -A” (“W” in Canada) to indica te it is acceptable for out door use. 7. Make sure your extens ion cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before usin[...]

FIGURE 2 ASSEMBL Y AND OPERA TING INSTRUCTIONS Hoist Set-up WA R N I N G ! Unplug the Hoist before set-up. 1. This Hoist is designed to be attached to a beam or steel pipe and bed securely held in place by both of the Hangers (#23) . See FIGURE 2. Note: The beam or steel pipe must be capable of carrying several times the weight of the Hoist and its[...]

OPERA TION (continued) Using the Hoist Refer to FIGURE WA R N I N G ! As illustrated in FIGURE 2 , the Cable (#56) must flow through the cable Guard (#29) , and the Stopper (#31) must be securely att ached to the end of the Cable (#56) . 1. Plug in the unit and press the Switch (#43 ) toward the “down” position to lower the Hook (#34) to the lo[...]

P ARTS LIST Part No. Description Part No. Description 1 Cover Fan 30 Screw 2 Impeller 31 S topper 3 Shield 32 Clamp 4 S tator 33 Connector 5 Screw 34 Hook 6 Bearing 35 Bearing 7 Basket 36 Pinion 8 Hub 37 Key 9 Hub Gasket 38 Connector 10 S pring 39 Switch/Cable 1 1 Shaft 40 S pring 12 Bearing 41 Screw 13 Flange 42 Cover 14 Gasket 43 Switch 15 Bushin[...]

P AGE 13[...]