Nissan Maxima (2013) инструкция обслуживания

® 2013 M AXI M A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2013 N IS SAN MAX I MA A35-D Printing : February 2013 (12) Publication No.: Printed in U .S.A. A35-D OM3E 0A35U1[...]

W elcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you under- stand the operation and maintenance of your vehicle so that you may enjoy many miles (kilome- ters) of driving pleasure. Please rea[...]

MODIFICA TION OF Y OUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or per- formance problems resulting from modi- fications may not be covered under NISSAN warranties. This manual includes information for all options [...]

CALIFORNIA PROPOSITION 65 W ARNING WARNING Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth de- fects or other reproductive harm. In addi- tion, certain fluids contained in vehicles and certain products of component wear contain or emit chem[...]

NISSAN CARE S... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Y our satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Y our NISSAN dealer is always available to assist you with all your automobile sales and service needs. However, if there is something that your NISSAN dealer c[...]

T able of Contents Illustrated table of contents Safety—Seats, seat belts and supplemental restraint system Instruments and controls Pre-driving checks and adjustments Monitor, climate, audio, phone and voice recognition systems Starting and driving In case of emergency Appearance and care Maintenance and do-it-yourself T echnical and consumer in[...]

[...]

0 Illustrated table of contents Air bags, seat belts and child restraints ..............0 - 2 Exterior front ......................................0 - 3 Exterior rear .......................................0 - 4 Passenger compartment ...........................0 - 5 Instrument panel ...................................0 - 6 Engine compartment check [...]

1. T op tether strap anchor (P . 1-34) 2. Head restraints (P . 1-7) 3. Rear seat belts (P . 1-11) 4. Roof-mounted curtain side-impact supplemental air bag (P . 1-37) 5. Front seat-mounted side-impact supplemental air bags (P . 1-37) 6. Head Restraints (P . 1-7) 7. Front seat belts (P . 1-11) 8. Supplemental front-impact air bags (P . 1-37) 9. Seats[...]

1. Engine hood (P . 3-17) 2. Windshield wiper and washer switch (P . 2-28) 3. Windshield (P . 8-20) 4. Moonroof (if so equipped) (P . 2-46) 5. P ower windows (P . 2-43) 6. Door locks, NISSAN Intelligent K ey®, keys, request button (P . 3-4, 3-2, 3-2, 3-2) 7. Mirrors (P . 3-25) 8. Tire pressure (P . 8-32) 9. Flat tire (P . 6-3) 10. Tire chains (P .[...]

1. Rear window defroster switch (P . 2-29) 2. Interior trunk lid release (P . 3-19) 3. T runk lid (P . 3-17) 4. V ehicle loading (P . 9-12) 5. Exterior trunk lid release/request button (P . 3-12) 6. Replacing bulbs (P . 8-30) 7. Fuel-filler cap, fuel recommendation (P . 3-20, P . 9-3 ) 8. Fuel-filler door (P . 3-20) 9. Child safety rear door locks [...]

1. Interior trunk access (P . 1-5) 2. Moonroof (if so equipped) (P . 2-46) 3. Sun visors (P . 3-24) 4. Interior lights, illuminated entry (P . 2-50) 5. HomeLink® universal transceiver (if so equipped) (P . 2-53) 6. Interior mirrors (P . 3-25) 7. Glove box (P . 2-41) 8. Cup holders (P . 2-40) 9. Console box (P . 2-41) 10. Front seat (P . 1-2) 11. R[...]

1. Side and center vents (P . 4-40) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-30) 3. Steering wheel switch for audio control and Bluetooth® Hands-Free Phone System (P . 4-102, 4-104) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P . 1-37, P . 2-34) 6. Security indicator light (P . 2-26) 7. Cruise contr[...]

24. V ehicle Dynamic Control (VDC) OFF switch (P . 2-37) Outside mirror controls (P . 3-27) Heated steering wheel switch (if so equipped) (P . 2-37) T runk lid release switch (P . 3-19) * Refer to the separate Navigation System Owner’s Manual (if so equipped) . See the page number indicated in paren- theses for operating details. Illustrated tabl[...]

1. P ower steering fluid reservoir (P . 8-13) 2. Engine oil filler cap (P . 8-10) 3. Brake fluid reservoir (P . 8-14) 4. Air cleaner (P . 8-19) 5. Fuse block (P . 8-22) 6. Battery (P . 8-15) 7. Fuse/fusible link box (P . 8-22) 8. Engine oil dipstick (P . 8-10) 9. Radiator cap (P . 8-7) 10. Drive belt location (P .8-17) 11. Engine coolant reservoir [...]

W arning light Name Page or Anti-lock Braking System (ABS) warn- ing light 2-11 or Brake warning light 2-11 Charge warning light 2-11 Engine oil pressure warning light 2-12 Low tire pressure warning light 2-12 Master warning light 2-13 W arning light Name Page Seat belt warning light and chime 2-14 Supplemental air bag warning light 2-14 Indicator [...]

MEMO 0-10 Illustrated table of contents[...]

1 Safety—Seats, seat belts and supplemental restraint system Seats . ...........................................1 - 2 Front power seat adjustment . . ...................1 - 3 Folding rear seat (if so equipped) .................1 - 5 Head restraints .................................1 - 7 Seat belts ....................................... 1-11 Prec[...]

WARNING ● Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an accident, you could be thrown into it and receive neck or other serious injuries. Y ou could also slide under the lap belt and receive serious internal injuries. ● For the most effective protecti[...]

FRONT POWER SEA T ADJUSTMENT Operating tips ● The power seat motor has an auto-reset overload protection circuit. If the motor stops during operation, wait 30 seconds, then reactivate the switch. ● Do not operate the power seat switch for a long period of time when the engine is off. This will discharge the battery . See “ Automatic drive pos[...]

Seat lifter (driver’s seat) Push the front or rear end of the switch up or down to adjust the angle and height of the seat cushion. Lumbar support (driver’s seat) The lumbar support feature provides lower back support to the driver. Move the lever up or down (manual) or move the switch forward or backward (power) to adjust the seat lumbar area.[...]

Thigh extension (driver’s side only , if so equipped) Pull up and hold the lever to extend the front portion to the desired position. FOLDING REAR SEA T (if so equipped) Interior trunk access For models without a rear center console, the trunk can be accessed from the passenger side of the rear seat for loading and unloading, as shown. 䊊 1 Pres[...]

● When returning the seatbacks to the upright position, be certain they are completely secured in the latched posi- tion. If they are not completely secured, passengers may be injured in an acci- dent or sudden stop. ● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they c[...]

Center armrest Pull the armrest down until it rests on the seat cushion. HEAD RESTRAINTS WARNING Head restraints supplement the other ve- hicle safety systems. They may provide additional protection against injury in cer- tain rear end collisions. Adjust the head restraints properly, as specified in this section. Check the adjustment after someone [...]

Components 1. Head restraint 2. Adjustment notches 3. Lock knob 4. Stalks Adjustment Adjust the head restraint so the center is level with the center of the seat occupant’s ears. T o raise the head restraint, pull it up. LRS0887 WRS0134 LRS0888 1-8 Safety—Seats, seat belts and supplemental restraint system[...]

T o lower, push and hold the lock knob and push the head restraint down. Removal Use the following procedure to remove the ad- justable head restraints. 1. Pull the head restraint up to the highest position. 2. Push and hold the lock knob. 3. Remove the head restraint from the seat. 4. Store the head restraint properly so it is not loose in the veh[...]

Front-seat Active Head Restraints The Active Head Restraint moves forward utiliz- ing the force that the seatback receives from the occupant in a rear-end collision. The movement of the head restraint helps support the occu- pant’s head by reducing its backward movement and helping absorb some of the forces that may lead to whiplash-type injuries[...]

PRECAUTIONS ON SEA T BEL T USAGE If you are wearing your seat belt properly ad- justed and you are sitting upright and well back in your seat with both feet on the floor, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up[...]

WARNING ● Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be properly re- strained in the rear seat and, if appro- priate, in a child restraint. WARNING ● The seat belt should be properly ad- justed to a snug fit. Failure to do so may reduce the effectiveness of the entire restraint system a[...]

WARNING ● Always route the shoulder belt over your shoulder and across your chest. Never put the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder. ● Position the lap belt as low and snug as possible AROUND THE HIPS, NO T THE WAIST . A lap belt worn too [...]

PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. The seat belt should be worn snug and always position the lap belt as low as possible around the hips, not the waist. Place the shoulder belt over your shoulder and across your chest. Never run the lap/shoulder belt over your ab- dominal area. Contact your doctor for specific reco[...]

Fastening the seat belts 䊊 1 Adjust the seat. See “Seats” earlier in this section. 䊊 2 Slowly pull the seat belt out of the retractor and insert the tongue into the buckle until you hear and feel the latch engage. ● The retractor is designed to lock dur- ing a sudden stop or on impact. A slow pulling motion permits the seat belt to move, [...]

䊊 3 P osition the lap belt portion low and snug on the hips as shown. 䊊 4 Pull the shoulder belt portion toward the retractor to take up extra slack. Be sure the shoulder belt is routed over your shoulder and across your chest. The front passenger seat and the rear seating positions three-point seat belts have two modes of operation: ● Emerge[...]

T o increase your confidence in the seat belts, check the operation as follows: ● Grasp the shoulder belt and pull forward quickly . The retractor should lock and re- strict further belt movement. If the retractor does not lock during this check or if you have any questions about seat belt opera- tion, see a NISSAN dealer. Shoulder belt height ad[...]

WARNING ● Only NISSAN seat belt extenders, made by the same company which made the original equipment seat belts, should be used with NISSAN seat belts. ● Adults and children who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident. ● Never use seat[...]

There are three basic types of child restraint systems: ● Rear-facing child restraint ● Forward-facing child restraint ● Booster seat The proper restraint depends on the child’s size. Generally , infants up to about 1 year and less than 20 lbs (9 kg) should be placed in rear-facing child restraints. Forward-facing child restraints are avail[...]

properly , the booster seat should raise the child so that the shoulder belt is properly positioned across the chest and the top, middle portion of the shoulder. The shoulder belt should not cross the neck or face and should not fall off the shoul- der. The lap belt should lie snugly across the lower hips or upper thighs, not the abdomen. A booster[...]

– Infants and children should never be held on anyone’s lap. Even the stron- gest adult cannot resist the forces of a collision. – Do not put a seat belt around both a child and another passenger. – NISSAN recommends that all child restraints be installed in the rear seat. Studies show that children are safer when properly restrained in the[...]

All U.S. states and Canadian provinces or territories require that infants and small children be restrained in an approved child restraint at all times while the vehicle is being operated. Canadian law requires the top tether strap on forward-facing child restraints be secured to the designated an- chor point on the vehicle. LA T CH (Lower Anchors [...]

LA T CH lower anchor location The LA T CH lower anchors are located at the rear of the seat cushion near the seatback. A label is attached to the seatback to help you locate the LA T CH lower anchors. Installing child restraint LA T CH lower anchor attachments LA T CH compatible child restraints include two rigid or webbing-mounted attachments that[...]

T op tether anchor point locations The child restraint top tether strap must be used when installing the child restraint with the LA T CH lower anchor attachments or seat belts. See “In- stalling top tether strap” later in this section. If you have any questions when installing a top tether strap child restraint, consult your NISSAN dealer for [...]

3. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your hand to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 4. After attaching the[...]

5. Check to make sure the child restraint is properly secured prior to each use. If the child restraint is loose, repeat steps 1 through 4. REAR-F ACING CHILD RESTRAINT INST ALLA TION USING THE SEA T BEL TS WARNING The three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR[...]

Refer to all W arnings and Cautions in the “Child safety” and “Child restraints” sections before in- stalling a child restraint. Follow these steps to install a rear-facing child restraint using the vehicle seat belts in the rear seats: 1. Child restraints for infants must be used in the rear-facing direction and therefore must not be used [...]

4. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in the belt. 5. Remove any additional slack from the seat belt; press downward and rearward firmly in the center of the child restraint to compress the vehicle seat cushion and seatback while pulling up on the seat belt. 6. After attaching the child restraint, test [...]

7. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 1 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. FORW ARD-F ACING CHILD RESTRAINT INST ALLA TION USING LA T CH Refer to all W arnings [...]

4. For child restraints that are equipped with webbing-mounted attachments, remove any additional slack from the anchor attach- ments. Press downward and rearward firmly in the center of the child restraint with your knee to compress the vehicle seat cushion and seatback while tightening the webbing of the anchor attachments. 5. Tighten the tether [...]

Refer to all W arnings and Cautions in the “Child Safety” and “Child Restraints” sections before installing a child restraint. Follow these steps to install a forward-facing child restraint using the vehicle seat belt in the rear seats or in the front passenger seat: 1. If you must install a child restraint in the front seat, it should be p[...]

4. Pull the shoulder belt until the belt is fully extended. At this time, the seat belt retractor is in the Automatic Locking Retractor (ALR) mode (child restraint mode) . It reverts to Emergency Locking Retractor (ELR) mode when the seat belt is fully retracted. 5. Allow the seat belt to retract. Pull up on the shoulder belt to remove any slack in[...]

8. After attaching the child restraint, test it be- fore you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm) , from side to side. T ry to tug it forward and check to see if the belt holds the restraint in place. If the restraint [...]

INST ALLING T OP TETHER STRAP First, secure the child restraint with the LA T CH lower anchors (rear outboard seat positions only) or the seat belt, as applicable. 1. Flip up the anchor cover 䊊 1 from the anchor point which is located directly behind the child seat. 2. P osition the top tether strap over the top of the head rest. 3. Secure the te[...]

Booster seats of various sizes are offered by several manufacturers. When selecting any booster seat, keep the following points in mind: ● Choose only a booster seat with a label certifying that it complies with Federal Motor V ehicle Safety Standard 213 or Canadian Motor V ehicle Safety Standard 213. ● Check the booster seat in your vehicle to[...]

Booster seat installation CAUTION Do not use the lap/shoulder belt in the Automatic Locking Retractor mode when using a booster seat with the seat belts. Refer to all W arnings and Cautions in the “Child Safety” , “Child Restraint” and “Booster Seats” sections before installing a child restraint. Follow these steps to install a booster [...]

4. P osition the lap portion of the seat belt low and snug on the child’s hips. Be sure to follow the booster seat manufacturer’s in- structions for adjusting the seat belt routing. 5. Pull the shoulder belt portion of the seat belt toward the retractor to take up extra slack. Be sure the shoulder belt is positioned across the top, middle porti[...]

Roof-mounted curtain side-impact supple- mental air bag system: This system can help cushion the impact force to the head of occu- pants in front and rear outboard seating positions in certain side-impact collisions. The curtain air bags are designed to inflate on the side where the vehicle is impacted. These supplemental restraint systems are de- [...]

● The driver and front passenger seat belt buckles are equipped with sensors that detect if the seat belts are fastened. The Advanced Air Bag System monitors the severity of a collision and seat belt us- age then inflates the air bags as needed. Failure to properly wear seat belts can increase the risk or severity of injury in an accident. ● Th[...]

WARNING ● Never let children ride unrestrained or extend their hands or face out of the window. Do not attempt to hold them in your lap or arms. Some examples of dangerous riding positions are shown in the illustrations WARNING ● Children may be severely injured or killed when the front air bags, side air bags or curtain air bags inflate if the[...]

WARNING ● Even with the NISSAN Advanced Air Bag System, never install a rear-facing child restraint in the front seat. An in- flating front air bag could seriously in- jure or kill your child. See “Child re- straints” earlier in this section for details. ARS1044 ARS1045 WRS0256 Safety—Seats, seat belts and supplemental restraint system 1-41[...]

WARNING Front seat-mounted side-impact supple- mental air bags and roof-mounted curtain side-impact supplemental air bags: ● The side air bags and curtain air bags ordinarily will not inflate in the event of a frontal impact, rear impact, rollover or lower severity side collision. Always wear your seat belts to help reduce the risk or severity of[...]

WARNING ● When sitting in the rear seat, do not hold onto the seatback of the front seat. If the side air bag inflates, you may be seriously injured. Be especially careful with children, who should always be properly restrained. Some examples of dangerous riding positions are shown in the illustrations. ● Do not use seat covers on the front sea[...]

1. Roof-mounted curtain side-impact supplemental air bag inflators 2. Roof-mounted curtain side-impact supplemental air bags 3. Front seat-mounted side-impact supplemental air bag modules 4. Air bag Control Unit (ACU) 5. Supplemental front-impact air bag mod- ules 6. Crash zone sensor 7. Occupant classification system control unit 8. Seat belt buck[...]

The NISSAN Advanced Air Bag System has dual stage inflators. It also monitors information from the crash zone sensor, the Air Bag Control Unit (ACU) , seat belt buckle sensors and the occu- pant classification sensor (pattern sensor) . Infla- tor operation is based on the severity of a colli- sion and seat belt usage for the driver. For the front p[...]

Front passenger air bag and status light WARNING The front passenger air bag is designed to automatically turn OFF under some con- ditions. Read this section carefully to learn how it operates. Proper use of the seat, seat belt and child restraints is nec- essary for most effective protection. Fail- ure to follow all instructions in this manual con[...]

air bag should be automatically turned OFF as required by the regulations. Front passenger seat adult occupants who are properly seated and using the seat belt as out- lined in this manual should not cause the passen- ger air bag to be automatically turned OFF . For small adults it may be turned OFF , however if the occupant takes his/her weight of[...]

on the driver’s side of the instrument panel, will blink. Have the system checked by a NISSAN dealer. Other supplemental front-impact air bag precautions WARNING ● Do not place any objects on the steer- ing wheel pad or on the instrument panel. Also, do not place any objects between any occupant and the steering wheel or instrument panel. Such [...]

Front seat-mounted side-impact supplemental air bag and roof- mounted curtain side-impact supplemental air bag systems The side air bags are located in the outside of the seatback of the front seats. The curtain air bags are located in the side roof rails. These systems are designed to meet voluntary guidelines to help reduce the risk of injury to [...]

● Right after inflation, several side air bag and curtain air bag system components will be hot. Do not touch them; you may severely burn yourself. ● No unauthorized changes should be made to any components or wiring of the side air bag and curtain air bag systems. This is to prevent damage to or accidental inflation of the side air bag and cur[...]

the vehicle becomes involved in certain types of collisions, helping to restrain front seat occu- pants. The pretensioner is encased within the seat belt retractor. These seat belts are used the same way as conventional seat belts. When a pretensioner activates, smoke is re- leased and a loud noise may be heard. This smoke is not harmful and does n[...]

If any of the following conditions occur, the front air bag, side air bag, curtain air bag and preten- sioner systems need servicing: ● The supplemental air bag warning light re- mains on after approximately 7 seconds. ● The supplemental air bag warning light flashes intermittently . ● The supplemental air bag warning light does not come on a[...]

MEMO Safety—Seats, seat belts and supplemental restraint system 1-53[...]

2 Instruments and controls Instrument panel ...................................2 - 2 Meters and gauges ................................2 - 3 Speedometer and odometer . . ...................2 - 4 T achometer ....................................2 - 5 Engine coolant temperature gauge ...............2 - 5 Fuel gauge ....................................[...]

Moonroof (if so equipped) ......................... 2-46 Automatic moonroof ........................... 2-46 Dual Panel Moonroof (if so equipped) ............... 2-47 Automatic moonroof ........................... 2-47 Rear power sun shade (if so equipped) ............. 2-49 Interior light ...................................... 2-50 Console light .[...]

1. Side and center vents (P . 4-40) 2. Headlight/fog light (if so equipped)/turn signal switch (P . 2-30) 3. Steering wheel switch for audio control and Bluetooth® Hands-Free Phone System (P . 4-102, 4-104) 4. Meters and gauges (P . 2-3) 5. Driver supplemental air bag/horn (P . 1-37, P . 2-34) 6. Security indicator light (P . 2-26) 7. Cruise contr[...]

24. V ehicle Dynamic Control (VDC) OFF switch (P . 2-37) Outside mirror controls (P . 3-27) Heated steering wheel switch (if so equipped) (P . 2-37) T runk lid release switch (P . 3-19) * Refer to the separate Navigation System Own- er’s Manual (if so equipped) . See the page number indicated in paren- theses for operating details. 1. T achometer[...]

SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates the vehicle speed. Odometer/T win trip odometer The odometer/twin trip odometer is displayed when the ignition switch is placed in the ON position. The odometer 䊊 1 records the total distance the vehicle has been driven. The twin trip odometer 䊊 2 records the distance of individual [...]

T ACHOMETER The tachometer indicates engine speed in revo- lutions per minute (rpm) . Do not rev the engine into the red zone 䊊 1 . CAUTION When engine speed approaches the red zone, shift to a higher gear or reduce en- gine speed. Operating the engine in the red zone may cause serious engine damage. ENGINE COOLANT TEMPERA TURE GAUGE The gauge in[...]

FUEL GAUGE The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during braking, turning, acceleration, or going up or down hills. The gauge needle returns to E (Empty) after the ignition is placed in the OFF position. The low fuel warning light comes on when the amount of fuel in the tank is getting low . Refill t[...]

COMP ASS DISPLA Y Push the button for about 1 second when the ignition switch is placed in the ON position to toggle the outside temperature and compass direction display 䊊 1 on or off. The display will indicate the direction that the vehicle is heading. N: North E: East S: South W: W est If the display reads “C” , calibrate the compass by dr[...]

Zone variation change procedure The difference between magnetic north and geo- graphical north is known as variance. In some areas, this difference can sometimes be great enough to cause false compass readings. Follow these instructions to set the variance for your particular location if this happens: 1. Press and hold the button for about 8 second[...]

1. With the display turned on, press and hold the for about 10 seconds. The “C” icon in the compass display will illuminate. 2. Calibrate the compass by driving the vehicle in three complete circles at a maximum speed of 5 MPH (8 km/h). 3. After completing the circles, the display should return to normal. CAUTION ● Do not install a ski rack, [...]

or Anti-lock Braking System (ABS) warning light Supplemental air bag warning light Security indicator light or Brake warning light Continuously V ariable T ransmission (CVT) indicator light Side light and headlight indicator light (green) Charge warning light Continuously V ariable T ransmission (CVT) position indicator light Slip indicator light E[...]

or Anti-lock Braking System (ABS) warning light When the ignition switch is placed in the ON position, the Anti-lock Braking System (ABS) warning light illuminates and then turns off. This indicates the ABS is operational. If the ABS warning light illuminates while the engine is running or while driving, it may indicate the ABS is not functioning p[...]

CAUTION ● Do not ground electrical accessories directly to the battery terminal. Doing so will bypass the variable control sys- tem and the vehicle battery may not charge completely. Refer to “V ariable voltage control system (if so equipped) ” in the “Maintenance and do-it- yourself” section later in this manual. ● Do not continue driv[...]

TPMS malfunction: If the TPMS is not functioning properly , the low tire pressure warning light will flash for approxi- mately 1 minute when the ignition switch is placed in the ON position. The light will remain on after the 1 minute. Have the system checked by a NISSAN dealer. The CHECK TIRE PRESSURE warning does not appear if the low tire pressu[...]

Seat belt warning light and chime The light and chime remind you to fasten your seat belts. The light illuminates whenever the ignition switch is placed in the ON or ST ART position and remains illuminated until the driver’s seat belt is fastened. At the same time, the chime sounds for about 6 seconds unless the driver’s seat belt is securely f[...]

Front passenger air bag status light The front passenger air bag status light will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used. For front passenger air bag status light operation, see “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental [...]

CAUTION Continued vehicle operation without hav- ing the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission con- trol system. Security indicator light This light blinks when the ignition switch is placed in the OFF , LOCK or ACC position. The blinking [...]

Light reminder chime With the ignition switch placed in the OFF posi- tion, a chime sounds when the driver’s door is opened if the headlights or parking lights are on. T urn the headlight control switch off before leav- ing the vehicle. NISSAN Intelligent K ey® door buzzer The Intelligent K ey door buzzer sounds if the Intelligent K ey is left i[...]

Fuel economy mode The fuel economy mode can be selected to dis- play the instant fuel economy since the last reset. Average speed mode The average speed mode can be selected to display the average miles per gallon and miles per hour since the last reset. Time/Miles (km) mode The time/miles (km) mode can be selected to show the time and distance dri[...]

Range mode The range mode can be selected to give you an estimation of the distance that can be driven before refueling. The range is constantly calcu- lated based on the amount of fuel in the fuel tank and the actual fuel consumption. Tire pressure mode The tire pressure mode displays the tire pressure information for your tires in the *** area of[...]

Exterior temperature mode The exterior temperature mode can be selected to provide you with the temperature outside of your vehicle. Setting mode The setting mode allows you to set reminders or preferences for alerts, maintenance intervals or language displays. In the setting mode screen press to move to: ● Alert ● Maintenance ● Options and p[...]

Reset mode The reset mode can be selected in any screen that allows for preferences to be programmed. Once the screen is selected, you have the option to reset the selected distances or time to a new setting. Maintenance mode The maintenance mode allows you to set alerts for the reminding of maintenance intervals for the following: ● engine oil ?[...]

Y ou can select the language, unit or change the dial effects by using the button and pressing . The settings are automatically saved when you exit the menu by pressing the BACK button or any other mode button. Warning mode The warning mode can be selected to view any warnings that may be present. Once the screen is selected you have the option of [...]

V ehicle information display warnings and indicators 1. Door and trunk open warning 2. Push warning 3. Low fuel warning 4. Low windshield-washer fluid warning 5. No key warning 6. Parking brake warning 7. Shift P warning 8. Engine start operation indicator 9. NISSAN Intelligent K ey® insertion indicator 10. NISSAN Intelligent K ey® removal indica[...]

12. Loose fuel cap warning 13. Check tire pressure warning 14. Tire pressure warning Door and trunk open warning This warning illuminates when a door or the trunk has been opened when the engine is running. Push warning After the Shift P warning illuminates, the Push warning will illuminate if the ignition switch is placed in the ACC position when [...]

This indicator means that the engine will start by pushing the push-button ignition switch with the brake pedal depressed. NISSAN Intelligent Key® insertion indica- tor This indicator illuminates when the Intelligent K ey needs to be inserted into the Intelligent K ey port. (For example, the Intelligent K ey battery is dis- charged.) If this indic[...]

Y our vehicle has two types of security systems: ● V ehicle security system ● NISSAN V ehicle Immobilizer System VEHICLE SECURITY S Y STEM The vehicle security system provides visual and audible alarm signals if someone opens the doors or trunk lid when the system is armed. It is not, however, a motion detection type system that activates when [...]

The alarm is activated by: ● opening the door or trunk lid without using the key or Intelligent K ey (even if the door is unlocked by releasing the door inside lock switch) . How to stop an activated alarm The alarm stops only by unlocking the driver’s door or the trunk lid with the key , pressing the button on the Intelligent K ey, or press- i[...]

Security indicator light The security indicator light blinks whenever the ignition switch is placed in the OFF , LOCK or ACC position. This function indicates the NISSAN V e- hicle Immobilizer System is operational. If the NISSAN V ehicle Immobilizer System is mal- functioning, the light will remain on while the ignition switch is placed in the ON [...]

CAUTION ● Do not operate the washer continu- ously for more than 30 seconds. ● Do not operate the washer if the windshield-washer fluid reservoir is empty. ● Do not fill the windshield-washer fluid reservoir with washer fluid concen- trates at full strength. Some methyl al- cohol based washer fluid concentrates may permanently stain the grill[...]

XENON HEADLIGHTS (if so equipped) WARNING c HIGH VOL T AGE ● When xenon headlights are on, they produce a high voltage. T o prevent an electric shock, never attempt to modify or disassemble. Always have your xe- non headlights replaced at a NISSAN dealer. ● X enon headlights provide considerably more light than conventional head- lights. If the[...]

HEADLIGHT CONTROL SWIT CH Lighting 䊊 1 When turning the switch to the posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊 2 When turning the switch to the posi- tion, the headlights come on and all the other lights remain on. CAUTION Use the headlights with the engine run- ning to avoid discharging the vehi[...]

T o turn on the autolight system: 1. Place the headlight switch in the AUT O po- sition 䊊 1 . 2. Place ignition in the ON position. 3. The autolight system automatically turns the headlights on and off. Initially , if the ignition switch is placed in the OFF position and a door is opened and left open, the headlights remain ON for a period of tim[...]

CAUTION Even though the battery saver feature au- tomatically turns off the headlights after a period of time, you should turn the head- light switch to the OFF position when the engine is not running to avoid discharging the vehicle battery. DA YTIME RUNNING LIGHT S Y STEM (Canada only) The headlights automatically illuminate at a re- duced intens[...]

TURN SIGNAL SWIT CH T urn signal 䊊 1 Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signal cancels automatically . Lane change signal 䊊 2 T o signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the lever does not latch. The turn signal wil[...]

The front seats are warmed by built-in heaters. The switch is located on the center console. 1. Start the engine. 2. Push the L O or HI position of the switch, as desired. The indicator light in the switch will illuminate. The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as lo[...]

The climate controlled seat warms up or cools down the front seat by blowing warm or cool air from the surface of the seat. The climate control switch is located on the center console. The climate controlled seat can be operated as follows: 1. Start the engine. 2. T urn the control knob to the H (Heat) side or to the C (Cool) side, as desired. The [...]

The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below 68°F (20°C) . Push the heated steering wheel switch to warm the steering wheel after the engine starts. The indicator light will come on. If the surface temperature of the steering wheel is below 68°F (20°C) , the system will[...]

The power outlets are for powering electrical accessories such as cellular telephones. They are rated at 12 V olt, 120 W (10A) maximum. The power outlets are powered only when the ignition switch is in the ACC or ON position. CAUTION ● The outlet and plug may be hot during or immediately after use. ● Only certain power outlets are designed for [...]

SEA TBACK POCKETS The seatback pockets are located on the back of the driver’s and passenger’s seats. The pockets can be used to store maps. SUNGLASSES HOLDER T o open the sunglasses holder, push and release. Only store one pair of sunglasses in the holder. WARNING Keep the sunglasses holder closed while driving to prevent an accident. CAUTION [...]

CUP HOLDERS CAUTION ● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger. ● Use only soft cups in the cup holder. Hard objects can injure you in an accident. T o open the front cup holders, push the cup holder lid. T o close, lower the cup h[...]

Soft bottle holder CAUTION ● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. ● Do not use bottle holder for open liquid containers. GL OVE BOX Open the glove box by pulling the handle. Use the mechanical key when locking 䊊 1 or unlocking [...]

Lower half Pull up on the passenger’s side latch to open the lower half of the console box. A power outlet is located inside the console box and there is stor- age for compact discs. GROCER Y HOOKS The grocery hooks are located in the trunk and can be used to hang a standard size plastic grocery bag. CAUTION Do not apply a total load of more than[...]

T o install a cargo net, attach the net to the retain- ers. T o remove a cargo net, detach the net from the retainers. POWER WINDOWS WARNING ● Make sure that all passengers have their hands, etc . inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows. ●[...]

Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close all of the windows. T o open a window, push the switch to the first detent and continue to hold down until the de- sired window position is reached. T o close a window , pull the switch to the first detent and continue to hold up until t[...]

Automatic operation T o fully open a window equipped with automatic operation, press the window switch down to the second detent and release it; it need not be held. The window automatically opens all the way . T o stop the window , lift the switch up while the window is opening. T o fully close a window equipped with automatic operation, pull the [...]

AUT OMA TIC MOONROOF The moonroof will only operate when the ignition switch is placed in the ON position. The auto- matic moonroof is operational for a period of time, even if the ignition switch is placed in the ACC or OFF position. If the driver’s door or the front passenger’s door is opened during this period of time, the power to the moonr[...]

When tilting down: If the control unit detects something caught in the moonroof as it tilts down, the moonroof will im- mediately tilt up. If the auto-reverse function malfunctions and re- peats opening or tilting up the moonroof, keep pushing the tilt down switch within 5 seconds after it happens; the moonroof will fully close gradually . Make sur[...]

Sliding the moonroof T o slide the moonroof: ● T o fully open the moonroof, push the switch 䊊 1 toward the open position until it reaches the second detent. If the switch 䊊 1 is pushed to the first detent, only the sunshade will open. ● T o fully close the moonroof, push the switch 䊊 2 toward the close position until it reaches the second[...]

Sunshade T o open the sunshade: ● T o fully open the sunshade, push the switch 䊊 1 toward the open position until it reaches the first detent. ● T o fully open the sunshade and the moon- roof together, push the switch 䊊 1 toward the open position until it reaches the second detent. T o close the sunshade: ● T o fully close the sunshade, p[...]

CAUTION ● Do not place objects (such as newspa- pers, handkerchiefs, etc .) on the screen inlet port. Doing so may entangle these objects in the screen when it is extend- ing or retracting, causing improper op- eration or damage to the screen. ● Do not push the sun shade arm with your hands, etc ., as this may deform it. Improper operation or d[...]

CONSOLE LIGHT The console light will turn on whenever the park - ing lights or headlights are illuminated. The console light brightness can be adjusted with the illumination brightness control. T o turn on the personal lights, press and release the switch 䊊 1 . T o turn the personal lights off, press and release the switch 䊊 1 . WIC1476 LIC1413[...]

T o turn the map lights on, press the switches. T o turn them off, press the switches again. CAUTION Do not use for extended periods of time with the engine stopped. This could result in a discharged battery. Models with moonroof WIC1494 Models with dual panel moonroof LIC1409 MAP LIGHTS 2-52 Instruments and controls[...]

The light illuminates when the trunk lid is opened. When the trunk lid is closed, the light goes off. The light will go off after a period of time if the trunk lid is left open, unless the ignition switch is in the ON position. For bulb replacement procedures, refer to “Exte- rior and interior lights” in the “Maintenance and do-it-yourself”[...]

PROGRAMMING HOMELINK® If you have any questions or are having difficulty programming your HomeLink® buttons, refer to the HomeLink® web site at: www .homelink.com or call 1-800-355-3515. NO TE: Place the ignition switch in the ACC posi- tion when programming HomeLink®. It is also recommended that a new battery be placed in the hand-held transmi[...]

Do not stand on your vehicle to perform the next steps. 4. At the receiver located on the garage door opener motor in the garage, locate the “learn” or “smart” button (the name and color of the button may vary by manufacturer but it is usually located near where the hanging antenna wire is attached to the unit) . If there is difficulty loca[...]

PROGRAMMING TROUBLE- DIAGNOSIS If the HomeLink® does not quickly learn the hand-held transmitter information: ● replace the hand-held transmitter batteries with new batteries. ● position the hand-held transmitter with its battery area facing away from the HomeLink® surface. ● press and hold both the HomeLink® and hand-held transmitter butt[...]

When your vehicle is recovered, you will need to reprogram the HomeLink® Univer- sal T ransceiver with your new transmitter information. FCC Notice: For USA: This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept[...]

MEMO 2-58 Instruments and controls[...]

3 Pre-driving checks and adjustments K e y s .............................................3 - 2 NISSAN Intelligent K ey® ........................3 - 2 NISSAN V ehicle Immobilizer System keys .........3 - 3 Doors ............................................3 - 4 Locking with key ................................3 - 4 Locking with inside lock knob ..[...]

1. T wo Intelligent Keys 2. Mechanical keys with built-in transpon- der chip (inside Intelligent K eys) 3. K ey number plate NISSAN INTELLIGENT KEY® Y our vehicle can only be driven with the Intelligent K eys which are registered to your vehicle’s Intel- ligent K ey system components and NISSAN V e- hicle Immobilizer System components. Never lea[...]

Mechanical key The Intelligent K ey contains the mechanical key, which can be used in case of a discharged bat- tery . T o remove the mechanical key, release the lock knob on the back of the Intelligent K ey. T o install the mechanical key, firmly insert it into the Intelligent K ey until the lock knob returns to the lock position. The mechanical k[...]

Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle. CAUTION Do not allow the immobilizer system key, which contains an electrical transponder, to come into contact with water or salt water. This could affect system function. When the doors are locked using one of the following methods, [...]

Opening and closing windows The driver’s door key operation allows you to open and close windows equipped with auto- matic operation at the same time. ● T o open the windows, turn the driver’s door key toward the rear of the vehicle for longer than 1 second after the door is unlocked. ● T o close the windows, turn the driver’s door key to[...]

Lockout protection When the power door lock switch (driver’s or front passenger’s side) is moved to the lock position with the Intelligent K ey in the port and any door open, all doors will lock and unlock automatically . With the Intelligent Key left in the vehicle (not in the Intelligent K ey port) and any door open, all doors will unlock aut[...]

WARNING ● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use. ● The Intelligent Key transmits radio waves when the buttons are pressed. The FA A advises the radio waves may affect aircraft navigation and comm[...]

CAUTION Listed below are conditions or occur- rences which will damage the Intelligent Key: ● Do not allow the Intelligent Key, which contains electrical components, to come into contact with water or salt water. This could affect the system function. ● Do not drop the Intelligent Key. ● Do not strike the Intelligent Key sharply against anoth[...]

If the Intelligent Key is too close to the door glass, handle or rear bumper, the request switches may not function. When the Intelligent K ey is within the operating range, it is possible for anyone, even someone who does not carry the Intelligent K ey, to push the request switch to lock/unlock the doors. DOOR L OCKS/UNL OCKS PRECAUTION ● Do not[...]

NISSAN INTELLIGENT KEY® OPERA TION Y ou can lock or unlock the doors without taking the Intelligent K ey out of your pocket or bag. When you carry the Intelligent K ey with you, you can lock or unlock all doors by pushing the door handle request switch within the range of opera- tion. Locking doors 1. Move the shift selector to the “P” positio[...]

● Doors do not lock with the door handle request switch with the Intelligent K ey inside the vehicle and a beep sounds to warn you. However, when an Intelligent K ey is inside the vehicle, doors can be locked with an- other Intelligent K ey. CAUTION ● After locking the doors using the re- quest switch, make sure that the doors have been securel[...]

All doors will be locked automatically unless one of the following operations is performed within 60 seconds after pushing the request switch. ● Opening any door. ● Pushing the ignition switch. The interior light timer illuminates for a period of time when a door is unlocked and the room light switch is in the DOOR position. The interior light [...]

When all doors are locked and the trunk lid is closed with the Intelligent K ey inside the trunk, the outside buzzer will sound and the trunk will open. HOW T O USE THE REMO TE KEYLESS ENTR Y FUNCTION The remote keyless entry function can operate all door locks using the remote keyless function of the Intelligent K ey. The remote keyless function c[...]

Unlocking doors 1. Press the button on the Intelligent Ke y. 2. The hazard warning lights flash once. 3. Press the button again within 60 sec- onds to unlock all doors. All doors will be locked automatically unless one of the following operations is performed within 1 minute after pressing the button. ● Opening any doors. ● Pushing the ignition[...]

Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention by pressing and holding the button on the Intelligent K ey for longer than 0.5 seconds. The panic alarm and headlights will stay on for a period of time. The panic alarm stops when: ● It has run for a period of time, or ● A[...]

TROUBLESHOO TING GUIDE V erify the location of all Intelligent K eys that are programmed for the vehicle. If another Intelligent K ey is in range or inside the vehicle, the vehicle system may respond differently than expected. Symptom Possible Cause Remedy When pushing the ignition switch to stop the engine The SHIFT P warning appears on the dis- p[...]

䊊 1 Pull the hood lock release handle located below the driver side instrument panel. The hood will spring up slightly . 䊊 2 Push the lever at the front of the hood to the side as illustrated with your fingertips and raise the hood. When closing the hood, lower it slowly and make sure it locks into place. WARNING ● Make sure the hood is compl[...]

OPENER OPERA TION WARNING ● Do not drive with the trunk lid open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “Ex - haust gas” in the “Starting and driving” section of this manual. ● Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where the[...]

INTERIOR TRUNK LID RELEASE WARNING Closely supervise children when they are around cars to prevent them from playing and becoming locked in the trunk where they could be seriously injured. Keep the car locked, with the rear seatback and trunk lid securely latched when not in use, and prevent children’s access to car keys. The interior trunk lid r[...]

OPENING THE FUEL -FILLER DOOR The fuel-filler door automatically unlocks when the driver’s door is unlocked. 1. Unlock the fuel-filler door using one of the following operations. ● Unlock the driver’s door with the keyfob. ● Push the power door lock switch to the unlock position. ● Push the door handle request switch. 2. T o open the fuel[...]

CAUTION ● Do not use E-15 or E-85 fuel in your vehicle. For further information see the “Fuel Recommendation” in the “T echni- cal and consumer information” section of this manual. ● The LOOSE FUEL CAP warning will ap- pear if the fuel-filler cap is not properly tightened. It may take a few driving trips for the message to be displayed.[...]

Loose Fuel Cap warning The L OOSE FUEL CAP warning appears in the vehicle information display when the fuel-filler cap is not tightened correctly after the vehicle has been refueled. It may take a few driving trips for the message to be displayed. T o turn off the warning, perform the following: 1. Remove and install the fuel-filler cap as soon as [...]

MANUAL OPERA TION (if so equipped) Tilt and telescopic operation Pull the lock lever 䊊 1 all the way towards you: ● Adjust the steering wheel forward or back - ward in direction 䊊 2 to the desired position. ● Adjust the steering wheel up or down in direction 䊊 3 to the desired position. Lock the steering wheel by releasing the lock lever.[...]

䊊 1 T o block glare from the front, swing down the sun visor. 䊊 2 T o block glare from the side, remove the sun visor from the center mount and swing the visor to the side. 䊊 3 Slide the extension sun visor in or out as needed. CAUTION ● Do not store the sun visor before return- ing the extension to its original position. ● Do not pull th[...]

AUT OMA TIC ANTI-GLARE REARVIEW MIRROR The inside mirror is designed so that it automati- cally dims during night time conditions and ac- cording to the intensity of the headlights of the vehicle following you. The automatic anti-glare feature is activated when the ignition switch is placed in the ON position. NO TE: Do not hang any objects over th[...]

T ype B and T ype C The indicator light 䊊 2 will illuminate when the automatic anti-glare feature is operating. T o turn off the automatic anti-glare feature, press: ● the O button for inside mirrors without compass. ● the button for inside mirrors with compass. The indicator light will turn off. T o turn on the automatic anti-glare feature a[...]

OUTSIDE MIRRORS The outside mirror remote control will operate only when the ignition switch is in the ACC or ON position. Move the small switch 䊊 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 䊊 2 . WARNING ● Objects viewed in the outside mirror on the passenger side are closer than th[...]

NO TE: If the outside mirror control switch is in the neutral position, neither mirror will turn downward when the shift selector is moved to R (Reverse) . Move the shift selector to R (Reverse) . Both mirrors will turn downward. The mirror surfaces will return to their original position when any of the following have occurred: ● The shift select[...]

MEMOR Y ST ORAGE FUNCTION T wo positions for the driver’s seat, steering col- umn, and outside mirrors can be stored in the automatic drive positioner memory . Follow these procedures to use the memory system. 1. Set the Continuously V ariable T ransmission (CVT) shift selector to the P (Park) position. 2. Place the ignition in the ON position. 3[...]

2. Open and close the driver’s door more than 2 times with the ignition switch in the L OCK position. Once the memory storage function has been restarted, you can store a memory position. See “Memory storage function” in this sec- tion. Selecting the memorized position Set the shift selector to the P (Park) position, then: ● Within 45 secon[...]

4 Monitor, climate, audio, phone and voice recognition systems Control panel buttons — color screen without Navigation System (if so equipped) ..................4 - 4 How to use the NISSAN controller ...............4 - 5 How to select menus on the screen ..............4 - 6 How to use the ST A TUS button ..................4 - 6 How to use the INF[...]

FM/AM radio with compact disc (CD) changer (if so equipped) ....................... 4-64 FM/AM/SA T radio with compact disc (CD) player (if so equipped) ......................... 4-69 FM/AM/SA T radio with CD/DVD player (if so equipped) ............................... 4-76 Digital V ersatile Disc (DVD) Player Operation (models with Navigation Syste[...]

NISSAN V oice Recognition Standard Mode ..... 4-130 Using the system ............................. 4-133 Before starting ............................... 4-133 Giving voice commands ....................... 4-134 NISSAN V oice Recognition Alternate Command Mode ............................. 4-142 Using the system ............................. 4-147 S[...]

WARNING ● Positioning of the heating or air condi- tioning controls and display controls should not be done while driving in or- der that full attention may be given to the driving operation. ● Do not disassemble or modify this sys- tem. If you do, it may result in accidents, fire, or electrical shock. ● Do not use this system if you notice a[...]

CAUTION ● The glass display screen may break if it is hit with a hard or sharp object. If the glass screen breaks, do not touch it. Doing so could result in an injury. ● T o clean the display, never use a rough cloth, alcohol, benzine, thinner or any kind of solvent or paper towel with a chemical cleaning agent. They will scratch or deteriorate[...]

HOW T O SELECT MENUS ON THE SCREEN V ehicle functions are viewed on the center dis- play screen in menus. Whenever a menu selec- tion is made or menu item is highlighted, different areas on the screen provide you with important information. See the following for details: 1. Header: Shows the path used to get to the current screen (for example, pres[...]

Fuel economy Press the INFO button, then select the “Fuel Economy” key using the NISSAN controller to display Average Fuel Economy , Distance to Empty and Fuel Economy History . Distance to empty (MI or km) The Distance to Empty (D TE) mode provides you with an estimation of the distance that can be driven before refueling. The D TE is constant[...]

Maintenance items Press the INFO button and select the “Mainte- nance” key using the NISSAN controller; the maintenance information will be displayed on the screen. Changing the maintenance interval Select one of the Reminder keys (Engine Oil, Oil Filter, Tire or Other Reminder) using the NISSAN controller to display the screen to change the ma[...]

T o return to the previous display after the MAIN- TENANCE NO TICE screen is displayed, press the BACK button. The MAINTENANCE NO TICE screen displays each time the key is turned ON until one of the following conditions are met: ● The “Reset” key is selected. ● The “Interval Reminder ON” key is set to OFF (indicator light not illuminate[...]

Brightness/contrast : Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the map background. Use the NISSAN controller to adjust the brightness to darker or brighter and the con- trast to lower or higher. The new settings are automatically saved when you exit the setting screen by pressing the BACK but[...]

Switch beeps settings Select the “Switch Beeps” key to adjust the switch beeps settings. With this option on (indicator light illuminated) , a beep will sound if any control panel button is pressed. Camera settings Select the “Camera” key. The Camera settings screen will appear. When this option is on (indicator light illumi- nated) , predi[...]

Daylight Savings Time: When this item is enabled (indicator light illumi- nated) , daylight savings time is on. T o turn off the daylight savings time, touch the “ON” key; the amber indicator light will go out. Time Zone: Select the “Time Zone” key; the Time Zone screen will appear. Select one of the following zones, depending on the curren[...]

Adjust Clock: T o adjust the time, select the + or - key for the hour until the desired number is reached. Repeat the process for the minutes on the line below . T o accept the changes made and return to the Clocks Settings screen, select the OK key . Comfort & Convenience settings Select the “Comfort & Conv .” key by using the NISSAN c[...]

Selective Door Unlock: When this item is turned on, only the driver’s door is unlocked first after the door unlock operation. When the door handle request switch on the driver’s or front passenger’s side door is pushed to be unlocked, only the corresponding door is unlocked first. All the doors can be unlocked if the door unlock operation is [...]

Select Language: Select the “English” key, the “Français” key or the “Español” key to change the language shown on the display . Select Units: Select the “US” (mi, °F , MPG) key or the “Metric” (km, °C, L/100 km) key to change the units shown on the display . OFF BUTT ON T o change the display brightness, press the OFF butto[...]

1. Z OOM OUT button* 2. ST A TUS button (P . 4-20) 3. DEST button* 4. ROUTE button* 5. NISSAN controller (P . 4-17) 6. INFO button (P . 4-20) 7. PHONE button** 8. + (brightness control) button 9. OFF brightness control button (P . 4-31) 10. - (brightness control) button 11. VOICE button* 12. SETTING button (P . 4-24) 13. MAP button* 14. BACK (previ[...]

“Example” — W ords marked in quotes refer to a key shown only on the display . These keys can be selected by touching the screen or using the NISSAN controller. HOW T O USE THE NISSAN CONTROLLER Use the NISSAN controller to choose an item on the display screen. Highlight an item on the dis- play using the main directional buttons 䊊 2 (cer- [...]

T o help ensure safe driving, some functions can- not be operated while driving. The on-screen functions that are not available while driving will be “grayed out” or muted. Park the vehicle in a safe location and then oper- ate the navigation system. WARNING ● AL WA Y S give your full attention to driving. ● Avoid using vehicle features tha[...]

Inputting characters: T ouch the letter or number key 䊊 1 . There are some options available when inputting characters. ● Uppercase: Shows uppercase characters. ● Lowercase: Shows lowercase characters. ● Space: Inserts a space. ● Delete: Deletes the last inputted character with one touch. T ouch and hold the “Delete” key to delete all[...]

2. Menu Selections: Shows the options to choose within that menu screen (for example, Auto Interior Illu- mination, etc.) . 3. Up/Down Movement Indicator: Shows that the NISSAN controller may be used to move up or down on the screen and select more options. 4. Screen Count: Shows the number of menu selections avail- able for the current menu, even [...]

Fuel economy Press the INFO button, then select the “Fuel Economy” key using the NISSAN controller to display Distance to Empty , Average Fuel Economy and Fuel Economy History . Distance to empty (MI or km) The Distance to Empty (D TE) mode provides you with an estimation of the distance that can be driven before refueling. The D TE is constant[...]

Maintenance items Press the INFO button and select the “Mainte- nance” key using the NISSAN controller; the maintenance information will be displayed on the screen. Changing the maintenance interval Select one of the maintenance reminder keys using the NISSAN controller to display the screen to change the maintenance interval. Y ou can choose b[...]

Displaying the maintenance notice re- minder Select the “Interval Reminder ON” key to display the MAINTENANCE INFORMA TION automati- cally at the set maintenance interval. The indica- tor light will illuminate when it is ON. The MAINTENANCE NO TICE screen will be au- tomatically displayed as shown when both of the following conditions are met: [...]

HOW T O USE THE SETTING BUTT ON When the SETTING button is pressed, the Set- tings screen will appear on the display . Y ou can select and/or adjust several functions, features and modes that are available for your vehicle. Use the NISSAN controller to select each item to be set. Display settings Select the “Display” key . On the screen above, [...]

Brightness/contrast : Select the “Brightness” key or the “Contrast” key to adjust the brightness or contrast of the display background. Use the NISSAN controller to adjust the brightness to darker or brighter and the con- trast to lower or higher. The new settings are automatically saved when you exit the setting screen by pressing the BACK[...]

Color theme: Select the “Display” key, then select the “Color Theme” key . The Color Theme select screen will appear. Select the key for the desired color. The appear- ance of the background, arrows and bars will change for all screens accordingly . Y ou can choose a black, blue or red color theme. Clock The following display will appear af[...]

Time Zone: Select the “Time Zone” key; the Time Zone screen will appear. Select one of the following zones, depending on the current location, by selecting the correct time zone key to enable that time zone (indicator light will illuminate for that location) . ● Pacific ● Mountain ● Central ● Eastern ● Atlantic ● Newfoundland ● Ha[...]

Comfort settings Select the “Others” key using the NISSAN con- troller, then select the “Comfort” key . The Com- fort settings screen will be displayed. Y ou can set the following operating conditions by selecting the desired item using the NISSAN controller. The indicator light (box at the right of the selected item) alternately turns on a[...]

Slide Driver Seat Back on Exit : Select to turn on or turn off the driver’s seat moving backward for easy exit when the ignition switch is in the OFF position and the driver’s door is opened. After getting into the vehicle and placing the ignition switch in the ACC position, the driver’s seat moves to the previous position. Return All Setting[...]

Select Units: Select the “US” (mi, °F , MPG) key or the “Metric” (km, °C, L/100 km) key to change the units shown on the display . V oice Recognition: For V oice Recognition settings, refer to “NISSAN V oice Recognition system” in this section. Camera settings Select the “Camera” key. The Camera settings screen will appear. When t[...]

V olume & beeps settings Navigation volume For navigation volume settings, refer to the sepa- rate Navigation System Owner’s Manual for infor- mation regarding these settings. Phone volume For phone volume settings refer to “Bluetooth® Hands-Free Phone System with Navigation Sys- tem” in this section. Switch beeps With this option on (in[...]

USING THE IMAGE VIEWER When a compatible portable storage device is plugged into the USB jack located in the center console, compatible image files stored on the device can be viewed on the control panel de- vice. Connecting the portable storage device T o connect a portable storage device to the sys- tem so that images stored on it can be viewed, [...]

Viewing images in a slideshow T o view all of the images on the device in a slide- show , first enter the full screen mode while viewing one of the images. The slideshow control buttons are located on the right side of the screen. Select the play key to begin the slideshow . The images shown on the screen will periodically change at a given interva[...]

Slideshow order: Select the “Random” key to display the images in a random order during a slideshow . Select the “Order List” key to display the images in the order in which they are stored on the storage device. Select the “Back” key or press the BACK button on the control panel to return to the slideshow screen. When the shift selecto[...]

HOW T O READ THE DISPLA YED LINES Guiding lines which indicate the vehicle width and distances to objects with reference to the vehicle body line 䊊 A are displayed on the monitor. Distance guide lines: Indicate distances from the vehicle body . ● Red line 䊊 1 : approx. 1.5 ft (0.5 m) ● Y ellow line 䊊 2 : approx. 3 ft (1 m) ● Green line [...]

● The distance guide line and the vehicle width line should be used as a refer- ence only when the vehicle is on a level paved surface. The distance viewed on the monitor is for reference only and may be different than the actual dis- tance between the vehicle and dis- played objects. ● When backing up the vehicle up a hill, objects viewed in t[...]

4. Maneuver the steering wheel to make the vehicle width guide lines 䊊 D parallel to the parking space 䊊 C while referring to the pre- dicted course lines. 5. When the vehicle is parked in the space completely , move the shift selector to the P (Park) position and apply the parking brake. DIFFERENCE BETWEEN PREDICTED AND ACTUAL DIST ANCES The d[...]

Backing up on a steep downhill When backing up the vehicle down a hill, the distance guide lines and the vehicle width guide lines are shown farther than the actual distance. For example, the display shows 3 ft (1.0 m) to the place 䊊 A , but the actual 3 ft (1.0 m) distance on the hill is the place 䊊 B . Note that any object on the hill is clos[...]

Backing up behind a projecting object The position 䊊 C is shown farther than the position 䊊 B in the display . However, the position 䊊 C is actually at the same distance as the position 䊊 A . The vehicle may hit the object when backing up to the position 䊊 A if the object projects over the actual backing up course. HOW T O ADJUST THE SCRE[...]

● Objects on the monitor may not be clear in a dark place or at night. This is not a malfunc- tion. ● If dirt, rain or snow attaches to the camera, the RearView Monitor may not clearly display objects. Clean the camera. ● Do not use wax on the camera window . Wipe off any wax with a clean cloth damp- ened with mild detergent diluted with wate[...]

1. T emperature control buttons (driver’s side) 2. AUT O climate control ON button 3. (front defroster) button 4. Air recirculation button 5. MODE (manual air flow control) button 6. T emperature control buttons (passen- ger’s side) 7. DUAL (passenger side temperature control) ON/OFF button 8. Fresh air intake button 9. (fan speed control) dial[...]

WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally in- jure themselves or others through inad- vertent operation of the vehicle. Also, on[...]

● When the front defroster button is pressed, the air conditioner will automati- cally be turned on at outside temperatures above 36°F (2°C) . The air recirculate mode automatically turns off, allowing outside air to be drawn into the passenger compart- ment to further improve the defogging per- formance. MANUAL OPERA TION Fan speed control T u[...]

The sunload sensor, located on the top driver’s side of the instrument panel, helps the system maintain a constant temperature. Do not put any- thing on or around this sensor. 1. Air recirculation button 2. A/C (air conditioner) ON/OFF button 3. MODE (manual air flow control) button 4. Fresh air intake button 5. T emperature control buttons (pass[...]

WARNING ● The air conditioner cooling function op- erates only when the engine is running. ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally in- jure themselves or others through inad- vertent operation of the vehicle. Also, on[...]

● When the front defroster button is pressed, the air conditioner will automati- cally be turned on at outside temperatures above 36°F (2°C) . The air recirculate mode automatically turns off, allowing outside air to be drawn into the passenger compart- ment to further improve the defogging per- formance. MANUAL OPERA TION Fan speed control T u[...]

The sunload sensor, located on the top driver’s side of the instrument panel, helps the system maintain a constant temperature. Do not put any- thing on or around this sensor. The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth’s ozone [...]

Reception conditions will constantly change be- cause of vehicle movement. Buildings, terrain, signal distance and interference from other ve- hicles can work against ideal reception. De- scribed below are some of the factors that can affect your radio reception. Some cellular phones or other devices may cause interference or a buzzing noise to com[...]

AUDIO OPERA TION PRECAUTIONS Compact disc (CD) player (models without Navigation System) CAUTION ● Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player. ● T rying to load a CD with the CD door closed could damage the CD and/or CD changer. ● Only one CD can be loaded into the CD player at a tim[...]

● If the CD cannot be played, one of the following messages will be displayed. CHECK DISC: ● Confirm that the CD is inserted cor- rectly (the label side is facing up, etc .) . ● Confirm that the CD is not bent or warped and it is free of scratches. PRESS EJECT: This is an error due to excessive tem- perature inside the player. Remove the CD b[...]

Disc Read Error: ● Confirm that the CD/DVD is inserted correctly (the label side is facing up, etc .) . ● Confirm that the CD/DVD is not bent or warped and it is free of scratches. Please Eject Disc: This error may be due to the tempera- ture inside the player getting too high. Remove the CD/DVD by pushing the EJECT button, and after a short ti[...]

● This copyright protected technology cannot be used without a permit from Macrovision Corporation. It is limited to personal use, etc ., as long as the permit from Macrovision Corporation is not issued. ● Modifying or disassembling is prohib- ited. ● Dolby digital is manufactured under li- cense from Dolby Laboratories, Inc . ● Dolby and t[...]

● Partitioned USB devices may not play cor- rectly . ● Some characters used in other languages (Chinese, Japanese, etc.) may not appear properly in the display . Using English lan- guage characters with a USB device is rec- ommended. General notes for USB use: ● The USB device may not function when the passenger compartment temperature is ex-[...]

● The Bluetooth® audio may be stopped un- der the following conditions: ● Receiving a call on the Hands-Free Phone System. ● Checking the connection to the hands- free phone. ● Do not place the Bluetooth® audio device in an area surrounded by metal or far away from the in-vehicle Bluetooth® module to prevent tone quality degradation and [...]

Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. ● The names of folders not containing MP3 or WMA files are not shown in the display . ● If there is a file in the top level of the disc, “Root Folder” is displayed. ● The playback order is the order in which the files were written by the writing software[...]

Specification chart : Supported media CD, CD-R, CD-RW , USB 2.0 Supported file systems CD, CD-R, CD-RW , ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista® operating system-based computer) are not supported. UDF Bridge (UDF 1.02 [...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/USB device was inserted correctly. Check if the CD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the player[...]

CD, DVD or USB with Compressed Audio Files (models with Navigation System) The file types supported by this system are MP3, WMA , AAC/M4A and A TRAC3. Explanation of terms: ● MP3 — MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well known compressed digital audio file format. This format allows for near “CD qual[...]

Playback order: Music playback order of a CD, DVD or USB device with compressed audio files is as illus- trated. ● The folder names of folders not containing compressed audio files are not shown in the display . ● If there is a file in the top level of the disc/USB, “Root Folder” is displayed. ● The playback order is the order in which th[...]

Specification chart : Supported media CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW, DVD±R DL, USB 2.0 Supported file systems CD, CD-R, CD-RW , DVD-ROM, DVD±R, DVD±RW, DVD±R DL, ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. * Files saved using the Live File System component (on a Windows Vista®[...]

T roubleshooting guide: Symptom Cause and Countermeasure Cannot play Check if the CD/DVD/USB device was inserted correctly. Check if the CD/DVD is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, th[...]

Compressed Video Files (models with Navigation System) Explanation of terms: ● DivX – DivX refers to the DivX® codec owned by Div , Inc. used for a lossy compres- sion of video based on MPEG-4. ● A VI – A VI stands for Audio Video Interleave. It is standard file format originated by Micro- soft Corporation. A .divx encoded file can be save[...]

Requirements for Supporting Video Playback: Media CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW, DVD±RW DL, USB 2.0 Memory File Systems CD, CD-R, CD-RW , DVD, DVD±R, DVD±RW , DVD±RW DL ISO9660 LEVEL1, ISO9660 LEVEL2, Romeo, Joliet, UDF Bridge (UDF1.02+ISO9660) , UDF1.5, UDF2.0 * ISO9660 Level 3 (packet writing) is not supported. * Files saved using th[...]

1. CD eject button 2. VOL/ON·OFF control knob 3. Station and CD select (1 - 6) buttons 4. L OAD CD button 5. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade, Balance, SSV (if so equipped) , and Beep) 6. AUX IN jack 7. AUX button 8. TRACK button 9. SEEK/CA T button 10. DISC button 11. RPT/RDM button 12. SCAN button 13. AM·FM button 14. DIS[...]

AUDIO control knob (Bass, T reble, Fade, Balance and Beep) : Press the AUDIO control knob to change the mode as follows: Bass → T reble → Fade → Balance → Beep ON/OFF → Bass T o adjust Bass, T reble, Fade and Balance, press the AUDIO control knob until the desired mode appears on the display . T urn the TUNE/FOLDER knob to adjust Bass and[...]

● Artist name displays the name of the artist of the song playing. ● Album title displays the title of the album of the song playing. FM/AM radio operation FM/AM band select : Pressing the AM·FM button will change the band as follows: AM → FM1 → FM2 → AM When the AM·FM button is pressed while the ignition switch is in the ACC or ON posi[...]

T o insert 6 CDs to the CD changer, press the L OAD button for more than 1.5 seconds. The slot numbers (1 – 6) will illuminate on the display when CDs are loaded into the changer. DISC button: When the DISC button is pressed with the sys- tem off and a compact disc loaded, the system will turn on and the compact disc will start to play . When the[...]

CD EJECT: Current/Selected disc: ● Press the button, then press the slot number (1 – 6) for the desired disc. The compact disc will be ejected. If no slot num- ber (1 – 6) is pressed, the current loaded disc will be ejected. If the ejected disc is not removed within 15 seconds, the disc will reload. All discs: ● Press and hold the button fo[...]

1. CD eject button 2. VOL/ON·OFF control knob 3. Station select (1 - 6) buttons 4. TUNE/FOLDER and AUDIO control knob (Bass, T reble, Fade and Balance) 5. AUX button* 6. TRACK button 7. SEEK/CA T button 8. DISC button 9. RPT/RDM button 10. SCAN button 11. FM·AM button *No satellite radio reception is available when the AUX button is pressed to ac[...]

This vehicle has Speed Sensitive V olume (SSV) for audio. The audio volume changes as the driv- ing speed changes. AUDIO control knob (Bass, T reble, Bal- ance and Fade) : Press the AUDIO control knob to change the mode as follows: Bass → T reble → Balance → Fade T o adjust Bass, T reble, Balance and Fade, press the AUDIO control knob until t[...]

CD/MP3 display mode While listening to a CD or an MP3/WMA CD, certain text might be able to be displayed (when CD encoded with text is being used) . Depending on how the CD or MP3/WMA CD is encoded, the following text might be able to be displayed by selecting the “T ext” key: ● Folder displays the name of the current folder being accessed. ?[...]

When the AUX button is pressed while the igni- tion switch is in the ACC or ON position, the radio will come on at the station last played. The last station played will also come on when the VOL/ON·OFF control knob is pressed ON. *When the AUX button is pressed, the satellite radio mode will be skipped unless an optional satellite receiver and ant[...]

If the radio is already operating, it will automati- cally turn off and the compact disc will play . If the system has been turned off while the com- pact disc was playing, pressing the VOL/ON·OFF control knob will start the compact disc. DISC button: When the DISC button is pressed with the sys- tem off and a compact disc loaded, the system will [...]

AUX (auxiliary) input jacks The auxiliary input jacks are located inside the center console 䊊 1 . NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary input jacks. Audio devices, such as some MP3 players, can also be connected to the system through the auxiliary input jacks. The auxi[...]

Additional features For more information about the iP od® player available with this system, see “iP od® player operation without Navigation System” in this sec- tion. For more information about the USB interface available with this system, see “USB interface (models without Navigation System)” in this sec- tion. 1. CD eject button 2. VOL[...]

*No satellite radio reception is available when the SA T button is pressed to ac- cess satellite radio stations unless op- tional satellite receiver and antenna are installed and a SiriusXM Satellite Radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. FM/AM/SA T RADIO WITH CD/DVD PLA YER (if so equippe[...]

For information on how to use the NISSAN con- troller, see “How to use the NISSAN controller” in this section. Display album cover art : When an audio source encoded with album cover art is played, the album cover art can be displayed on the screen. T o toggle this feature on or off, touch the “Display Album Cover Art” key . When the featur[...]

● Song displays the ID3 encoded tag of the song name. ● Album displays the ID3 encoded tag of the album name. ● Artist displays the ID3 encoded tag of the artist’s name. Some of this text might not display while playing a regular CD. FM/AM/SA T radio operation FM/AM band select : Pressing the FM·AM button will change the band as follows: A[...]

1. Choose the radio band AM, FM1 or FM2 using the FM·AM select button, or choose the satellite band XM1, XM2 or XM3 using the SA T button. 2. T une to the desired station using manual, SEEK or SCAN tuning. Press and hold any of the desired station memory buttons (1 – 6) until the preset number is updated on the display and the sound is briefly m[...]

If the station broadcasts RDS information, the text information is automatically displayed. Compact disc (CD) player operation Place the ignition in the ACC or ON position and insert the compact disc into the slot with the label side facing up. The compact disc will be guided automatically into the slot and start playing. If the radio is already op[...]

CD menu T ouch the “Menu” key on the display while a CD or CD with compressed audio files is playing to bring up a list of options. Depending on the type of CD being played, the following options may be available: ● Play Mode This option allows you to alter the play pattern of the CD. T ouch the key of the mode you wish to apply . The modes c[...]

● Folder List The folders on the disc are displayed. Select the key of a folder name to begin playing tracks from that folder. ● T rack List The tracks on the disc are displayed. Select the key of a track name to begin playing that track. CD EJECT button: When the button is pressed with the com- pact disc loaded, the compact disc will be ejecte[...]

Before connecting a device to the auxiliary input jacks, turn off the power of the portable device. With a compatible device connected to the aux- iliary input jacks, press the DISC·AUX button repeatedly until the AUX mode appears in the display . The output from the device will be played through the display (when the vehicle is in the (P) Park po[...]

DIGIT AL VERSA TILE DISC (DVD) PLA YER OPERA TION (models with Navigation System) Precautions Start the engine when using the DVD entertain- ment system. Movies will not be shown on the front display while the vehicle is in any drive position to reduce driver distraction. Audio is available when a movie is played. T o view movies on the front displ[...]

The operation screen will be turned on when the DISC-AUX button is pressed while a DVD is playing. The operation screen will turn off auto- matically after a period of time. T o turn it on again, press the DISC-AUX button. DVD operation keys When the DVD is playing without the operation screen being shown, you may use the touch- screen to select it[...]

● 10 Key Search (DVD-VIDEO, VIDEO CD, CD-DA , DVD-VR) Select the “10 K ey Search” key to open the number entry screen. Input the number you want to search for and select the “OK” key. The specified Title/Chapter or Group/T rack will be played. ● Select No. (VIDEO CD) Select the “Select No.” key to open the number entry screen. Input[...]

USB INTERF ACE (models without Navigation System) (if so equipped) Connecting a device to the USB input jack CAUTION ● Depending on size and shape of USB device, the console lid may not fully close. Do not force console lid closed as this may damage USB device. ● Do not force the USB device into the USB port. Inserting the USB device tilted or [...]

SEEK/CA T and TRACK buttons: Press the SEEK/CA T button while an au- dio file on the USB device is playing to return to the beginning of the current track. Press the SEEK/CA T button several times to skip backward several tracks. Press the TRACK button while an audio file on the USB device is playing to advance one track. Press the TRACK button sev[...]

● Do not force the USB device into the USB port. Inserting the USB device tilted or up-side-down into the port may damage the USB device and the port. Make sure that the USB device is con- nected correctly into the USB port. (Some USB devices come with a mark as a guide. Make sure that the mark is facing the correct direction be- fore inserting t[...]

Menu: There are some options available during play- back. Select one of the following that are dis- played on the screen, if necessary . Refer to the following information for each item. ● Movie Playback Switch to the movie playback mode. This item is displayed only when the USB memory contains movie files. The shift selector must be in Park (P) [...]

Operation keys: T o operate the USB memory, select the desired key displayed on the display screen. ● Pause: Select the key to pause the movie file. T o resume playing the movie file, use the key . ● Play: Select the key to start playing the movie file or resume the movie file if it has been paused. ● Stop: Select the key to stop playing the [...]

● 10 Key Search Select the “10 K ey Search” key to open the number entry screen. Input the number you want to search for and the specified file or folder will be played. ● Display Adjust the image quality of the screen. ● DRC DRC (Dynamic Range Compression) auto- matically adjusts the soundtrack volume level to maintain a more even sound [...]

T o disconnect the iPod® from the vehicle, re- move the USB end of the cable from the USB jack on the vehicle, then remove the cable from the iP od®. * iP od® is a trademark of Apple Inc., registered in the U.S. and other countries. Compatibility The following models are compatible: ● iP od® 5th Generation - version 1.2.1 ● iP od® Classic [...]

Interface: The interface for iP od® operation shown on the vehicle center display is similar to the iP od® interface. Use the NISSAN controller and the BACK button to play the iP od® with your favorite settings. The following items can be chosen from the menu list screen. For further information about each item, see the iP od® Owner’s Manual.[...]

● Do not force the iPod® cable into the USB port. Inserting the iPod® cable tilted or up-side-down into the port may damage the iPod® cable and the port. Make sure that the iPod® cable is con- nected correctly into the USB port. (Some iPod® cables come with a mark as a guide. Make sure that the mark is facing the correct direction be- fore i[...]

Audio main operation Place the ignition switch in the ACC or ON position. Press the DISC·AUX button repeatedly to switch to the iP od® mode. If the system has been turned off while the iP od® was playing, pressing the VOL/ON·OFF control knob will start the iP od®. DISC·AUX button: When the DISC·AUX button is pressed with the system off and t[...]

● Albums ● Songs ● P odcasts ● Genres ● Composers ● Audiobooks ● Shuffle Songs The following keys shown on the screen are also available: ● MENU: returns to the previous screen. ● : plays/pauses the music selected. Play mode: While the iP od® is playing, touch the “Menu” key to display the iP od® menu. T ouch the “Play Mod[...]

Scrolling menus: While navigating long lists of artists, albums or songs in the music menu, it is possible to scroll the list by the first letter. T o activate letter index- ing, perform one of the following: ● T urn the NISSAN controller quickly. ● Press and hold the up/down directional ar- rows on the NISSAN controller. ● T ouch and hold th[...]

4. A screen will appear asking if you are con- necting the device to use with the hands- free phone system. Select the “No” key . 5. Enter a PIN of your choice. It will be needed by your Bluetooth® audio device to com- plete the connection process. See the Bluetooth® audio device’s owner’s manual for more information. Audio main operation[...]

Bluetooth® audio settings T o adjust the Bluetooth® audio settings, follow the procedure below: 1. Press the SETTING button on the instru- ment panel. 2. Select the “Bluetooth” key . 3. Select the “Connected Devices” key . 4. Select the “ Audio Player” key . 5. A list of the connected Bluetooth® audio players is displayed. Select the[...]

6. The Device Name and Device Address are displayed on the screen. Select the “Select” key to make this device the active Bluetooth® audio player. Select the “Edit” key to edit the details of the player, such as Device Name. Select the “Delete” key to delete the device. CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the[...]

1. P ower on and SOURCE select switch 2. T uning switch 3. V olume control switch 1. P ower on and SOURCE select switch 2. Menu control switch/ENTER button 3. V olume control switch STEERING WHEEL SWIT CH FOR AUDIO CONTROL The audio system can be operated using the controls on the steering wheel. POWER on switch With the ignition switch in the ACC [...]

vides a different function than a tilting up/down for less than 1.5 seconds. AM and FM: ● Tilt up/down for less than 1.5 seconds to increase or decrease the preset station. ● Tilt up/down for more than 1.5 seconds to seek up or down to the next station. ● Press the ENTER button to show the list of preset stations. XM (if so equipped) : ● Ti[...]

When installing a CB, ham radio or car phone in your vehicle, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts. WARNING ● A cellular phone should not be used for any purpose while driving so full atten- tion may be given to vehicle operation. Some [...]

Y our NISSAN is equipped with the Bluetooth® Hands-Free Phone System. If you have a com- patible Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless technology , you can make or receive a hands-free telephone call with your cellular phone [...]

– Y our cellular phone is locked to prevent it from being dialed. ● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice dur- ing a call. ● Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quali[...]

Operating tips T o get the best performance out of the NISSAN V oice Recognition system, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing voice commands correctly . ● W ait un[...]

● Numbers can be spoken in small groups. The system will prompt you to continue en- tering digits, if desired. Example: 1-800-662-6200 – “One eight zero zero” The system repeats the numbers and prompts you to enter more. – “six six two” The system repeats the numbers and prompts you to enter more. – “six two zero zero” ● Say ?[...]

Y ou can also use the button to interrupt the system feedback and give a command at once. See “List of voice commands” and “During a call” in this section for more information. PHONE/END While the voice recognition sys- tem is active, press and hold the button for 5 seconds to quit the voice recognition system at any time. TUNING SWIT CH Wh[...]

3. Say: “ Add phone” 䊊 B . The system acknowl- edges the command and asks you to initiate connecting from the phone handset 䊊 C . The connecting procedure of the cellular phone varies according to each cellular phone model. See the cellular phone Own- er’s Manual for details. Y ou can also visit www .nissanusa.com/bluetooth for instruc- t[...]

LIST OF VOICE COMMANDS Main Menu “Call” “Phonebook” “Recent Calls” “Connect Phone” “Help” When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the com- mands in each sub-menu. Remember to wait for the tone before speaking. [...]

If a call back number does not exist, the system announces, “There is no number to call back” and ends the VR session. During a call During a call there are several command options available. Press the button on the steering wheel to mute the receiving voice and enter com- mands. ● “Help” — The system announces the avail- able commands.[...]

“T ransfer Entry” 䊊 A Use the T ransfer Entry command to store a new name in the system. When prompted by the system, say the name you would like to give the new entry . For example, say: “Mary .” If the name is too long or too short, the system tells you, then prompts you for a name again. Also, if the name sounds too much like a name al[...]

NO TE: Each phone has its own separate phone- book. Y ou cannot access Phone A’s phone- book if you are currently connected with Phone B . “List Names” 䊊 A Use the List Names command to hear all the names and locations in the phone book. The system recites the phone book entries but does not include the actual phone numbers. When the playba[...]

“Delete Phone” 䊊 C Use the Delete Phone command to delete a phone that is connected to the vehicle. The sys- tem will list the names assigned to each phone and then prompt you for the phone you wish to delete. Deleting a phone from the vehicle will also delete that phonebook for that phone. “T urn Bluetooth OFF” 䊊 D Use the T urn Blueto[...]

● next entry ● dial star two one seven oh ● yes ● no ● select ● missed ● dial eight five six nine two ● Bluetooth on ● outgoing ● call three one nine oh two ● nine seven pause pause three oh eight ● cancel ● call back number ● call star two zero nine five ● delete phone ● dial eight three zero five one ● record nam[...]

TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved. Symptom Solution System fails to interpret the command correctly[...]

WARNING ● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation. ● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop you[...]

phone module when the ignition switch is placed in the ON position with the connected cellular phone turned on and carried in the vehicle. Y ou can register up to 5 different Bluetooth® cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. NISSAN V oice Recognition system supports the phone com[...]

REGULA T ORY INFORMA TION FCC Regulatory information – CAUTION: T o maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions. – Operation is subject to the following two con- ditions: 1. This device ma[...]

2. Select the “Connect Bluetooth” key. 3. A popup box will appear on the screen, prompting you to confirm that the connec- tion is for the phone system. Select the “Y es” key . 4. When a PIN code appears on the screen, operate the Bluetooth® cellular phone to enter the PIN code. The connecting procedure of the cellular phone varies accordi[...]

VEHICLE PHONEBOOK This vehicle has two phonebooks available for your use. Depending on your phone, the system may automatically download your entire cell phone’s phonebook into the “Handset Phone- book” . For the details on downloading your phonebook, see “Handset phonebook” in this section. If your phonebook does not automati- cally down[...]

● Copy from Call History The system will show a list of your incoming, outgoing or missed calls that were down- loaded from your cell phone (depending on your phone’s compatibility) . Y ou may select one of these entries to save in the vehicle phonebook. ● Copy from the Handset The system will show your cell phone’s phonebook that was downl[...]

● V oicetag Confirm and store the voicetag. V oicetags allow easy dialing using the NISSAN V oice Recognition system. For more information, see “NISSAN V oice Recognition System” in this section. T o delete an entry, select the “Delete” key at step 3. HANDSET PHONEBOOK Many phones will support an automatic down- load of the cellular phone[...]

MAKING A CALL T o make a call, follow the procedure below: 1. Press the PHONE button on the instrument panel or the switch on the steering wheel. The “Phone” screen will appear on the display . 2. Select one of the following options to make a call: ● V ehicle Phonebook: Select the name from an entry stored in the vehicle phonebook. ● Handse[...]

Answer: Accept an incoming call to talk. Hold Call: Put an incoming call on hold. Reject Call: Reject an incoming call. T o finish the call, follow one of the procedures listed below: a. Select the “Reject Call” key on the display . b. Press the PHONE button on the instrument panel. c. Press and hold the phone button on the steering wheel switc[...]

ENDING A CALL T o finish the call, perform one of the following procedures: ● Select the “Hang up” key on the “Call in Progress” display . ● Push the switch on the steering wheel. ● When the “Call in Progress” screen is dis- played, press the PHONE button on the instrument panel to hang up. If any other screen is currently display[...]

Download Handset Phonebook: See “Handset Phonebook” in this section for adding, editing and deleting contacts in the handset phonebook. V olume & Ringtone: Adjust the volume level of the ringtone, incoming call sound and outgoing call sound. When the “ Automatic Hold” option is turned on, an incom- ing call will be placed on hold automa[...]

Edit Bluetooth Info: Check information about the device name, device address and device PIN. Replace Connected Phone: Replace the phone currently connected to the system. This option allows you to keep any voic- etags that were recorded using the previous phone. CALL VOLUME Adjusting the incoming or outgoing call volume may improve clarity if recep[...]

NISSAN V oice Recognition allows hands-free operation of the systems equipped on this ve- hicle, such as phone and vehicle information. There are two voice recognition modes of opera- tion available. They are: ● Standard Mode ● Alternate Command Mode In Standard Mode (the factory default setting) , commands that are available are always shown o[...]

1. Press the INFO button on the instrument panel. 2. Select the “Others” key . 3. Select the “V oice Recognition” key . NO TE: Y ou can skip steps 1 to 3 by pressing the button and saying “Help” . 4. Select the “User Guide” key . 5. Select an item. Available items: ● Getting Started Describes the basics of how to operate the V oic[...]

T utorials on the operation of the Voice Rec- ognition system If you choose “Finding a Street Address” , “Using the Address Book” or “Placing Calls”, you can view tutorials on how to perform these operations using V oice Recognition. Let’s Practice The system is equipped with a tutorial that allows you to practice saying commands and [...]

Useful tips for correct operation Y ou can display useful speaking tips to help the system recognize your voice commands cor- rectly . 1. Select “Help on Speaking” . 2. Y ou can confirm the page by scrolling the screen using the NISSAN controller or touching the page down key . V oice recognition settings The available settings of the NISSAN V [...]

GIVING VOICE COMMANDS 1. Press the switch located on the steer- ing wheel. 2. A list of commands appears on the screen, and the system announces, “W ould you like to access Phone, Navigation, Information, Audio or Help?” 3. After the tone sounds and the icon on the screen changes from to , speak a command. 4. Continue to follow the voice menu p[...]

● If you want to adjust the volume of the sys- tem feedback, push the volume control switch on the steering wheel or use the audio system volume knob while the system is making an announcement. How to speak numbers V oice Recognition requires a certain way to speak numbers when giving voice commands. Refer to the following examples. General rule:[...]

Standard Mode command list Category Command: COMMAND ACTION Phone Displays Phone function commands. Navigation Displays Navigation function commands. Information Displays V ehicle Information. Audio Displays Audio commands. Help Displays User Guide. Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. Cha[...]

V ehicle Information Command: COMMAND ACTION Fuel Economy Displays Fuel Economy information. Maintenance Displays Maintenance information. T raffic Info. T urns the traffic information system on and off. Where am I? Displays current vehicle location. Audio Command: COMMAND ACTION AM Changes the audio system mode to AM radio. FM Changes the audio sy[...]

V oice command examples Some basic voice command examples are de- scribed here. For navigation system commands, see the sepa- rate Navigation System Owner’s Manual. Example 1 — Placing a call to the phone number 800-662-6200: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Naviga[...]

4. Say “Dial Number” . 5. Say “800” . 6. The system announces, “Please say the next three digits or dial, or say change number.” 7. Say “662” . LHA1334 LHA1335 LHA1336 Monitor, climate, audio, phone and voice recognition systems 4-139[...]

8. The system announces, “Please say the last four digits or say change number.” 9. Say “6200” . 10. The system announces, “Dial or Change Number?” 11. Say “Dial” . 12. The system makes a call to 800-662- 6200. NO TE: ● Y ou can also speak “800-662-6200” (10 continuous digits) or “662-6200” (7 con- tinuous digits) , if the[...]

Example 2 — Placing an international call to the phone number 011-81-111-222-3333: 1. Press the switch located on the steer- ing wheel. 2. The system announces, “W ould you like to access Phone, Navigation, Information, Au- dio or Help?” 3. Say “Phone” . 4. Say “International Call” . WHA1332 LHA1333 LHA1334 Monitor, climate, audio, ph[...]

5. Say “011811112223333” . 6. Say “Dial”. 7. The system makes a call to 011-81-111- 222-3333. NO TE: Any digit input format is available in the International Number input process, as well as the special characters such as star (*) , pound (#) , and plus (+) . NISSAN VOICE RECOGNITION AL TERNA TE COMMAND MODE The Alternate Command Mode enabl[...]

Activating Alternate Command Mode 1. Press the SETTING button on the instru- ment panel. 2. Select the “Others” key on the display . 3. Select the “V oice Recognition” key . 4. Select the “ Alternate Command Mode” key. 5. The confirmation message is displayed on the screen. Select the “OK” key to activate the Alternate Command Mode.[...]

Only manual controls such as the touchscreen can navigate the command list menu. As an alternative to the voice command “Help” , you may access the command list using the fol- lowing steps: 1. Press the INFO button on the instrument panel. 2. Select the “Others” key using the NISSAN controller. 3. Select the “V oice Recognition” key usi[...]

Alternate Command Mode command list Phone Command: COMMAND ACTION Dial Number Makes a call to a spoken phone number up to 10 digits. V ehicle Phonebook Makes a call to a contact in the vehicle phonebook. Handset Phonebook Makes a call to a contact in the handset phonebook. International Call Makes an international call by allowing more than 10 digi[...]

COMMAND ACTION Planview Map Changes the Map display to a 2-dimensional view. North Up Changes the Map display to keep north pointing up on the screen. Heading Up Changes the Map display to keep the direction of the vehicle pointing up on the screen. Zoom In <1 to 13> Changes the map scale to a smaller number. Zoom Out <1 to 13> Changes [...]

Displaying user guide Y ou can confirm how to use voice commands by accessing a simplified User Guide, which con- tains basic instructions and tutorials for several voice commands. 1. Press the INFO button on the instrument panel. 2. Select the “Others” key . 3. Select the “V oice Recognition” key . 4. Select the “User Guide” key . 5. S[...]

Before starting T o get the best performance from NISSAN V oice Recognition, observe the following: ● K eep the interior of the vehicle as quiet as possible. Close the windows to eliminate the surrounding noises (traffic noises, vibration sounds, etc.) , which may prevent the system from recognizing the voice commands cor- rectly . ● When the c[...]

Operating tips ● Say a command after the tone. V oice com- mands cannot be accepted when the icon is . ● If the command is not recognized, the sys- tem repeats the announcement. Repeat the command in a clear voice. ● Press the switch on the steering wheel to return to the previous screen. ● If you want to cancel the command, press and hold [...]

Speaker Adaptation: Starts a system training procedure to learn the specific sounds of your voice. See “Speaker ad- aptation function” in this section. Alternate Command Mode: For advanced operation, an Alternate Command Mode is provided. This setting enables control of the audio system as well as additional commands for the Phone and Navigatio[...]

5. Select a category to be learned by the sys- tem from the following list: ● Phone ● Navigation ● Information ● Audio ● Help The voice commands in the category are displayed. 6. Select a voice command to train. The V oice Recognition system starts. 7. The system requests that you repeat a com- mand after a tone. This command is also disp[...]

TROUBLESHOO TING GUIDE The system should respond correctly to all voice commands without difficulty . If problems are en- countered, follow the solutions given in this guide for the appropriate error. Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved. Symptom/error message S[...]

5 Starting and driving Precautions when starting and driving ................5 - 2 Exhaust gas (carbon monoxide) ..................5 - 2 Three-way catalyst ..............................5 - 2 Tire Pressure Monitoring System (TPMS) ..........5 - 3 Avoiding collision and rollover ....................5 - 5 Off-road recovery ...........................[...]

WARNING ● Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to ca[...]

WARNING ● The exhaust gas and the exhaust sys- tem are very hot. Keep people, animals or flammable materials away from the exhaust system components. ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. CAUTION ● Do not use leaded gasoline. Deposits from leaded ga[...]

Additional information: ● The TPMS does not monitor the tire pressure of the spare tire. ● The TPMS will activate only when the vehicle is driven at speeds above 16 MPH (25 km/h). Also, this system may not detect a sudden drop in tire pressure (for example a flat tire while driving) . ● The low tire pressure warning light does not automatical[...]

● Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS. ● Do not inject any tire liquid or aerosol tire sealant into the tires, as this may cause a malfunction of the tire pressure sensors. CAUTION Do not place metalized film or any metal parts (antenna, etc .) on the windows. This may caus[...]

OFF-ROAD RECOVER Y If the right side or left side wheels unintentionally leave the road surface, maintain control of the vehicle by following the procedure below . Please note that this procedure is only a general guide. The vehicle must be driven as appropriate based on the conditions of the vehicle, road and traffic. 1. Remain calm and do not ove[...]

DRINKING AL COHOL/DRUGS AND DRIVING WARNING Never drive under the influence of alcohol or drugs. Alcohol in the bloodstream re- duces coordination, delays reaction time and impairs judgement. Driving after drinking alcohol increases the likelihood of being involved in an accident injuring yourself and others. Additionally, if you are injured in an [...]

The ignition lock is designed so that the ignition switch position cannot be switched to OFF until the shift selector is moved to the P (Park) posi- tion. When the ignition switch cannot be pushed to- ward the OFF position, proceed as follows: 1. Move the shift selector into the P (Park) position. 2. Push the ignition switch. The ignition switch po[...]

OFF: The ignition switch is in the OFF position when the engine is turned off using the ignition switch. No lights will illuminate on the ignition switch. ACC (Accessories) : This position activates electrical accessories, such as the radio, when the engine is not running. ACC has a battery saver feature that will turn the ignition switch to the OF[...]

T o remove the Intelligent Key from the port, push the ignition switch to the L OCK position and pull the Intelligent K ey out of the port 䊊 C . NO TE: The Intelligent Key port does not charge the Intelligent Key battery. If you see the low battery indicator, replace the battery as soon as possible. See “Battery replace- ment” in the “Maint[...]

● Make sure the area around the vehicle is clear. ● Check fluid levels such as engine oil, cool- ant, brake fluid, and window washer fluid as frequently as possible, or at least whenever you refuel. ● Check that all windows and lights are clean. ● Visually inspect tires for their appearance and condition. Also check tires for proper inflati[...]

NO TE: Care should be taken to avoid situations that can lead to potential battery discharge and potential no-start conditions such as: 1. Installation or extended use of electronic accessories that consume battery power when the engine is not running (Phone char- gers, GPS, DVD players, etc.) 2. V ehicle is not driven regularly and/or only driven [...]

CAUTION When stopping the vehicle on an uphill grade, do not hold the vehicle by depress- ing the accelerator pedal. The foot brake should be used for this purpose. The CVT in your vehicle is electronically con- trolled to produce maximum power and smooth operation. The CVT can operate in two different automatic drive modes: ● D (Drive) mode - Mo[...]

4. Stop the vehicle completely before shifting the shift selector to the P (Park) position. The CVT is designed so the foot brake pedal MUST be depressed before shifting from P (Park) to any drive position while the ignition switch is in the ON position. The shift selector cannot be moved out of P (Park) and into any of the other gear posi- tions i[...]

R (Reverse) : CAUTION T o prevent transmission damage, use the P (Park) or R (Reverse) position only when the vehicle is completely stopped. Use the R (Reverse) position to back up. Make sure the vehicle is completely stopped before selecting the R (Reverse) position. The brake pedal must be depressed to move the shift selector from P (Park) , N (N[...]

lected using the shift paddles (if so equipped) on the steering wheel 䊊 B and 䊊 C . In the manual shift mode, the shift range is displayed on the position indicator in the meter. When shifting the shift selector to the manual shift gate, the position indicator displays 1 (first) up to 6 (sixth) depend- ing on vehicle speed. Shift ranges up or d[...]

Shift lock release If the battery charge is low or discharged, the shift selector may not be moved from the P (Park) position even with the brake pedal depressed and the shift selector button pressed. It will be necessary to jump start or have your battery charged, see “Jump starting” in the “In case of emergency” section. Contact your NISS[...]

Fail-safe If the vehicle is driven under extreme con- ditions, such as excessive wheel spinning and subsequent hard braking, the fail-safe system may be activated. The MIL may come on to indicate the fail-safe mode is activated, see “Malfunction Indicator Light (MIL)” in the “Instrument and controls” sec- tion. This will occur even if all e[...]

T o engage: Firmly depress the parking brake. T o release: 1. Firmly apply the foot brake. 2. Move the shift selector to the P (Park) posi- tion. 3. Firmly depress the parking brake pedal and it will release. 4. Before driving, be sure the brake warning light goes out. 1. CANCEL switch 2. ACCEL/RES switch 3. COAST/SET switch 4. ON/OFF switch PRECAU[...]

T o set cruising speed, accelerate the vehicle to the desired speed, push the COAST/SET switch and release it. T ake your foot off the accelerator pedal. Y our vehicle maintains the set speed. ● T o pass another vehicle, depress the ac- celerator pedal. When you release the pedal, the vehicle returns to the previously set speed. ● The vehicle m[...]

CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and en- sure the future reliability and economy of your new vehicle. Failure to follow these recommendations may result in short- ened engine life and reduced engine performance. ● Avoid driving for long periods at constant speed, ei[...]

6. Plan for the Shortest Route ● Utilize a map or navigation system to de- termine the best route to save time 7. Avoid Idling ● Shutting off your engine when safe for stops exceeding 30–60 seconds saves fuel and reduces emissions 8. Buy an Automated Pass for T oll Roads ● Automated passes permit drivers to use special lanes to maintain cru[...]

WARNING ● Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire. ● Safe parking procedures require that both the parking brake be set and the transmission placed into P (Park) . Fail- ure to do so could cause the vehicle to move unexpectedly or roll away and re- sult in[...]

The power assisted steering uses a hydraulic pump, driven by the engine, to assist steering. If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, much greater steering effort is needed, especially in sharp turns and at low speeds. WARNING If the engine is not running or is turned off while driving, the [...]

This procedure is described in the vehicle service manual and can be performed by a NISSAN dealer. ANTI-L OCK BRAKING S Y STEM (ABS) WARNING ● The Anti-lock Braking System (ABS) is a sophisticated device, but it cannot pre- vent accidents resulting from careless or dangerous driving techniques. It can help maintain vehicle control during braking [...]

When the ABS senses that 1 or more wheels are close to locking up, the actuator rapidly applies and releases hydraulic pressure. This action is similar to pumping the brakes very quickly . Y ou may feel a pulsation in the brake pedal and hear a noise from under the hood or feel a vibration from the actuator when it is operating. This is normal and [...]

The VDC system is automatically reset to on when the ignition switch is placed in the off position then back to the on position. The computer has a built in diagnostic feature that tests the system each time you start the engine and move the vehicle forward or in reverse at a slow speed. When the self-test occurs, you may hear a clunk noise and/or [...]

FREEING A FROZEN DOOR L OCK T o prevent a door lock from freezing, apply de- icer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole or use the remote keyless entry function on the Intelligent K ey. ANTI-FREEZE In the winter when it is anticipated that the tem- perature will drop below 32°F (0°C) [...]

● Whatever the condition, drive with cau- tion. Accelerate and slow down with care. If accelerating or downshifting too fast, the drive wheels will lose even more traction. ● Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement. ● Allow greater following distances on slippery roads. ● Wa[...]

MEMO 5-30 Starting and driving[...]

6 In case of emergency Emergency engine shut off .........................6 - 2 Hazard warning flasher switch ......................6 - 2 Flat tire ...........................................6 - 3 Tire Pressure Monitoring System (TPMS) ..........6 - 3 Changing a flat tire .............................6 - 3 Jump starting ............................[...]

T o shut off the engine in an emergency situation while driving, perform the following procedure: – Rapidly push the push-button ignition switch 3 consecutive times in less than 1.5 seconds, or – Push and hold the push-button ignition switch for more than 2 seconds. Push the switch on to warn other drivers when you must stop or park under emerg[...]

TIRE PRESSURE MONIT ORING S Y STEM (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pres- sure of all tires except the spare. When the low tire pressure warning light is lit, and the CHECK TIRE PRESSURE warning appears in the vehicle information display , one or more of your tires is significantly u[...]

WARNING ● Make sure the parking brake is securely applied and the CVT is shifted into P (Park) . ● Never change tires when the vehicle is on a slope, ice or slippery areas. This is hazardous. ● Never change tires if oncoming traffic is close to your vehicle. Wait for profes- sional road assistance. Blocking wheels Place suitable blocks 䊊 1 [...]

Remove the jack 䊊 1 and wheel nut wrench 䊊 2 from the tool box on the right side of the trunk compartment. Remove the spare tire. Jacking up vehicle and removing the damaged tire WARNING ● Never get under the vehicle while it is supported only by the jack. If it is nec- essary to work under the vehicle, sup- port it with safety stands. ● Us[...]

● Use the correct jack -up points. Never use any other part of the vehicle for jack support. ● Never jack up the vehicle more than necessary. ● Never use blocks on or under the jack. ● Do not start or run the engine while vehicle is on the jack. It may cause the vehicle to move. This is especially true for vehicles with limited slip differe[...]

Installing the spare tire The spare tire is designed for emergency use. See specific instructions under the heading “ Wheels and tires” in the “Mainte- nance and do-it-yourself” section of this manual. 1. Clean any mud or dirt from the surface be- tween the wheel and hub. 2. Carefully put the spare tire on and tighten the wheel nuts finger [...]

T o start your engine with a booster battery, the instructions and precautions below must be fol- lowed. WARNING ● If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. ● Explosive hydrogen gas is always pres- ent in the vicinity of the battery. Keep all spark[...]

WARNING Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury. 1. If the booster battery is in another vehicle, position the two vehicles to bring their bat- teries near each other. Do not allow the two vehicles to touch. 2. Apply the parking brake. Move the shift se- lector t[...]

CAUTION ● CVT models cannot be push-started or tow-started. Attempting to do so may cause transmission damage. ● Do not push start this vehicle. The three-way catalyst may be damaged. If your vehicle is overheating (indicated by an extremely high temperature gauge reading) or if you feel a lack of engine power, detect abnormal noise, etc., take[...]

6. After the engine cools down, check the cool- ant level in the engine coolant reservoir tank with the engine running. Add coolant to the engine coolant reservoir tank if necessary . Have your vehicle repaired at a NISSAN dealer. When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect[...]

T OWING RECOMMENDED B Y NISSAN NISSAN recommends that your vehicle be towed with the driving (front) wheels off the ground or place the vehicle on a flat bed truck as illustrated. CAUTION ● Never tow CVT models with the front wheels on the ground or four wheels on the ground (forward or backward) , as this may cause serious and expensive damage t[...]

VEHICLE RECOVER Y (freeing a stuck vehicle) Pulling a stuck vehicle WARNING T o avoid vehicle damage, serious per- sonal injury or death when recovering a stuck vehicle: ● Contact a professional towing service to recover the vehicle if you have any questions regarding the recovery procedure. ● Do not use the vehicle tie-downs to tow or free a s[...]

MEMO 6-14 In case of emergency[...]

7 Appearance and care Cleaning exterior ..................................7 - 2 W ashing ......................................7 - 2 W axing ........................................7 - 2 Removing spots ................................7 - 3 Underbody ....................................7 - 3 Glass .........................................7 - 3 Alumi[...]

In order to maintain the appearance of your ve- hicle, it is important to take proper care of it. T o protect the paint surfaces, please wash your vehicle as soon as you can: ● after a rainfall to prevent possible damage from acid rain. ● after driving on coastal roads. ● when contaminants such as soot, bird drop- pings, tree sap, metal parti[...]

REMOVING SPO TS Remove tar and oil spots, industrial dust, insects, and tree sap as quickly as possible from the surface of the paint to avoid lasting damage or staining. Special cleaning products are available at a NISSAN dealer or any automotive accessory store. UNDERBOD Y In areas where road salt is used in winter, it is necessary to clean the u[...]

● Do not apply wheel cleaners to the wheels when they are hot. The wheel temperature should be the same as am- bient temperature. ● Rinse the wheel to completely remove the cleaner within 15 minutes after the cleaner is applied. CHROME P ARTS Clean all chrome parts regularly with a non- abrasive chrome polish to maintain the finish. TIRE DRESSI[...]

CAUTION ● Never use benzine, thinner or any simi- lar material. ● Small dirt particles can be abrasive and damaging to leather surfaces and should be removed promptly. Do not use saddle soap, car waxes, polishes, oils, cleaning fluids, solvents, deter- gents or ammonia-based cleaners as they may damage the leather’s natural finish. ● Never [...]

SEA T BEL TS The seat belts can be cleaned by wiping them with a sponge dampened in a mild soap solution. Allow the belts to dry completely in the shade before using them. See “Seat belt maintenance” in the “Safety – Seats, seat belts and supplemen- tal restraint system” section of this manual. WARNING Do not allow wet seat belts to roll [...]

CAUTION ● NEVER remove dirt, sand or other de- bris from the passenger compartment by washing it out with a hose. Remove dirt with a vacuum cleaner or broom. ● Never allow water or other liquids to come in contact with electronic compo- nents inside the vehicle as this may damage them. Chemicals used for road surface de-icing are extremely corr[...]

MEMO 7-8 Appearance and care[...]

8 Maintenance and do-it-yourself Maintenance requirements ..........................8 - 2 General maintenance ..............................8 - 2 Explanation of general maintenance items .........8 - 2 Maintenance precautions ...........................8 - 5 Engine compartment check locations ................8 - 6 Engine cooling system ............[...]

Y our NISSAN has been designed to have mini- mum maintenance requirements with long ser- vice intervals to save you both time and money . However, some day-to-day and regular mainte- nance is essential to maintain your NISSAN’s good mechanical condition, as well as its emis- sions and engine performance. It is the owner’s responsibility to make[...]

When driving in areas using road salt or other corrosive materials, check lubrication frequently . Lights* Clean the headlights on a regular basis. Make sure that the headlights, stop lights, tail lights, turn signal lights, and other lights are all operating properly and installed securely . Also check headlight aim. Road wheel nuts (lug nuts)* Wh[...]

Seat belts Check that all parts of the seat belt system (for example, buckles, anchors, adjusters and retractors) operate properly and smoothly , and are installed securely . Check the belt web- bing for cuts, fraying, wear or damage. Steering wheel Check for changes in the steer- ing system, such as excessive freeplay , hard steering or strange no[...]

where mud and dirt may have accumulated. See the “ Appearance and care” section of this manual. Windshield-washer fluid* Check that there is adequate fluid in the reservoir. When performing any inspection or maintenance work on your vehicle, always take care to prevent serious accidental injury to yourself or damage to the vehicle. The followin[...]

CAUTION ● Do not work under the hood while the engine is hot. T urn the engine off and wait until it cools down. ● Avoid contact with used engine oil and coolant. Improperly disposed engine oil, engine coolant and/or other vehicle fluids can damage the environment. Al- ways conform to local regulations for disposal of vehicle fluid. ● Never l[...]

1. P ower steering fluid reservoir 2. Engine oil filler cap 3. Brake fluid reservoir 4. Air cleaner 5. Fuse block/ Fusible links 6. Battery 7. Fusible links 8. Engine oil dipstick 9. Radiator cap 10. Drive belt location 11. Engine coolant reservoir 12. Windshield-washer fluid reservoir NO TE: Side covers removed for clarity. T o remove the engine c[...]

WARNING ● Never remove the radiator or coolant reservoir cap when the engine is hot. Wait until the engine and radiator cool down. Serious burns could be caused by high pressure fluid escaping from the radiator. See precautions in “If your vehicle overheats” found in the “In case of emergency” section of this manual. ● The radiator is e[...]

CHECKING ENGINE COOLANT LEVEL Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level 䊊 B , add coolant to the MAX level 䊊 A . If the reservoir is empty , check the coolant level in the radiator when the engine is cold. If there is insufficient coolant in the radiator, fill the radiator with[...]

CHECKING ENGINE OIL LEVEL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn off the engine. Wait more than 10 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Re- insert it all the way . 5. Remove the d[...]

CHANGING ENGINE OIL 1. Park the vehicle on a level surface and apply the parking brake. 2. Start the engine and let it idle until it reaches operating temperature. 3. T urn the engine off and wait more than 10 minutes. 4. Place a large drain pan under the drain plug 䊊 A (under the body) . 5. Remove the oil filler cap 䊊 B (inside the en- gine co[...]

CHANGING ENGINE OIL FIL TER 1. Park the vehicle on a level surface and apply the parking brake. 2. T urn the engine off. 3. Place a large drain pan under the oil filter 䊊 A . 4. Loosen the oil filter 䊊 A with an oil filter wrench by turning it counterclockwise. Then remove the oil filter by turning it by hand. CAUTION Be careful not to burn you[...]

The fluid level should be checked using the HO T MAX range on the power steering fluid reservoir at fluid temperatures of 122° - 176°F (50° - 80°C) or using the COLD MAX range on the power steering fluid reservoir at fluid tempera- tures of 32° - 86°F (0° - 30°C) . If the fluid is at or below the MIN line, add Genu- ine NISSAN PSF to HO T M[...]

BRAKE FLUID Check the brake fluid level in the reservoir. If the fluid level is below the MIN line or the brake warning light comes on, add Genuine NISSAN Super Heavy Duty Brake Fluid or equivalent DO T 3 fluid up to the MAX line. If fluid must be added frequently , the system should be checked by a NISSAN dealer. WINDSHIELD-W ASHER FLUID RESERVOIR[...]

● K eep the battery surface clean and dry. Clean the battery with a solution of baking soda and water. ● Make certain the terminal connections are clean and securely tightened. ● If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery terminal cable to prevent discharge. NO TE: Care should be taken to avoid[...]

1. Remove the vent caps with a screwdriver as shown. Use a cloth to protect the battery case. 2. Check the fluid level in each cell. If it is necessary to add fluid, add only distilled water to bring the level up to the bottom of the filler opening. Do not overfill. Reinstall the vent caps. V ehicles operated in high temperatures or under severe co[...]

CAUTION ● Do not ground accessories directly to the battery terminal. Doing so will by- pass the variable voltage control sys- tem and the vehicle battery may not charge completely. ● Use electrical accessories with the en- gine running to avoid discharging the vehicle battery. Y our vehicle is equipped with a variable voltage control system. T[...]

2. Have the belt checked regularly for condi- tion and tension in accordance with the maintenance schedule found in the “NISSAN Service and Maintenance Guide” . REPLACING SP ARK PLUGS Iridium-tipped spark plugs It is not necessary to replace iridium-tipped 䊊 A spark plugs as frequently as conventional type spark plugs because they last much l[...]

The air cleaner filter should not be cleaned and reused. Replace it according to the maintenance log shown in the “NISSAN Service and Mainte- nance Guide.” When replacing the filter, wipe the inside of the air cleaner filter housing and the cover with a damp cloth. T o remove the air cleaner filter: ● Unlatch the clips and move the air cleane[...]

CLEANING If your windshield is not clear after using the windshield-washer or if a wiper blade chatters when running, wax or other material may be on the blade or windshield. Clean the outside of the windshield with a washer solution or a mild detergent. Y our windshield is clean if beads do not form when rinsing with clear water. Clean each blade [...]

Be careful not to let anything get into the washer nozzle 䊊 A . This may cause clogging or improper windshield washer operation. If something gets into the nozzle, remove it with a needle or small pin 䊊 B . If the brakes do not operate properly , have the brakes checked by a NISSAN dealer. Self-adjusting brakes Y our vehicle is equipped with se[...]

T wo types of fuses are used. T ype 䊊 A is used in the fuse boxes in the engine compartment. T ype 䊊 B is used in the passenger compartment fuse box. T ype A fuses are provided as spare fuses. They are stored in the passenger compartment fuse box. T ype A fuses can be installed in the engine com- partment and passenger compartment fuse boxes. I[...]

3. Remove the fuse box cover by pushing the tab and lifting the cover up. 4. Remove the fuse with the fuse puller. The fuse puller is located in the center of the fuse block in the passenger compartment. 5. If the fuse is open 䊊 A , replace it with a new fuse 䊊 B . 6. If a new fuse also opens, have the electrical system checked and repaired by [...]

Fusible links If the electrical equipment does not operate and fuses are in good condition, check the fusible links. If any of these fusible links are melted, replace with only Genuine NISSAN parts. P ASSENGER COMP ARTMENT CAUTION Never use a fuse of a higher or lower amperage rating than specified on the fuse box cover. This could damage the elect[...]

Extended storage switch If any electrical equipment does not operate, remove the extended storage switch and check for an open fuse. NO TE: The extended storage switch is used for long term vehicle storage. Even if the ex - tended storage switch is broken it is not necessary to replace it. Replace only the open fuse in the switch with a new fuse. H[...]

CAUTION Be careful not to allow children to swallow the battery or removed parts. NISSAN INTELLIGENT KEY® Replace the battery in the Intelligent K ey as fol- lows: 1. Remove the mechanical key from the Intelli- gent K ey. 2. Insert a small screwdriver 䊊 A into the slit 䊊 B of the corner and twist it to separate the upper part from the lower pa[...]

or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For Canada: This device complies with RSS-210 of In- dustry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interfer[...]

FRONT P ARK/TURN/SIDEMARKER LIGHT Bulb replacement requires the removal of the headlight assembly . If replacement is required, see your NISSAN dealer. FOG LIGHTS (if so equipped) Replacing the fog light bulb If replacement is required, see your NISSAN dealer. CAUTION ● High pressure halogen gas is sealed inside the halogen bulb. The bulb may bre[...]

1. Headlight assembly 2. Map light 3. Rear personal lights 4. Fog light (if so equipped) 5. Step light 6. High-mounted stop light (T ype A) 7. T runk light 8. High-mounted stop light (T ype B) 9. License plate light 10. Rear combination light WDI0666 Maintenance and do-it-yourself 8-29[...]

Replacement procedures All other lights are either type A , B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover. Indicates bulb removal Indicates bulb installation Use a cloth 䊊 1 to protect the housing. WDI0263 Map lights WDI0667 8-30 Maintenance and do-it-yourself[...]

Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. Use a cloth 䊊 1 to protect the housing. V anity mirror light WDI0340 Step light LDI0341 Personal light WDI0670 Maintenance and do-it-yourself 8-31[...]

If you have a flat tire, see “Flat tire” in the “In case of emergency” section of this manual. TIRE PRESSURE Tire Pressure Monitoring System (TPMS) This vehicle is equipped with the Tire Pressure Monitoring System (TPMS) . It monitors tire pressure of all tires except the spare. When the low tire pressure warning light is lit and the CHECK [...]

● Tires can lose air suddenly when driven over potholes or other objects or if the vehicle strikes a curb while parking. The tire pressures should be checked when the tires are cold. The tires are considered COLD after the vehicle has been parked for 3 or more hours, or driven less than 1 mile (1.6 km) at moderate speeds. Set the tire pressure to[...]

Tire and loading information label 䊊 1 Seating capacity: The maximum num- ber of occupants that can be seated in the vehicle. 䊊 2 V ehicle load limit: See loading infor- mation in the “T echnical and con- sumer information” section. 䊊 3 Original tire size: The size of the tires originally installed on the vehicle at the factory . 䊊 4 Co[...]

Checking tire pressure 1. Remove the valve stem cap from the tire. 2. Press the pressure gauge squarely onto the valve stem. Do not press too hard or force the valve stem side- ways, or air will escape. If the hissing sound of air escaping from the tire is heard while checking the pressure, reposition the gauge to eliminate this leakage. 3. Remove [...]

Size Cold Tire Inflation Pres- sure Front Original Tire P245/45VR18 230 kPa, 33 PSI P245/40VR19 230 kPa, 33 PSI P245/40WR19 230 kPa, 33 PSI Rear Original Tire P245/45VR18 230 kPa, 33 PSI P245/40VR19 230 kPa, 33 PSI P245/40WR19 230 kPa, 33 PSI Spare Tire (T emporary) T145/80D17 420 kPa, 60 PSI TIRE LABELING Federal law requires tire manufacturers to[...]

䊊 1 Tire size (example: P215/65R15 95H) 1. P: The “P” indicates the tire is de- signed for passenger vehicles (not all tires have this information) . 2. Three-digit number (215): This num- ber gives the width in millimeters of the tire from sidewall edge to side- wall edge. 3. T wo-digit number (65): This number, known as the aspect ratio, gi[...]

䊊 2 TIN (Tire Identification Number) for a new tire (example: DO T XX XX XXX XXXX) 1. DO T : Abbreviation for the “Depart- ment Of T ransportation” . The symbol can be placed above, below or to the left or right of the Tire Identification Number. 2. T wo-digit code: Manufacturer’s identification mark. 3. T wo-digit code: Tire size. 4. Three[...]

䊊 7 The word “radial” The word “radial” is shown if the tire has radial structure. 䊊 8 Manufacturer or brand name Manufacturer or brand name is shown. Other Tire-related T erminology In addition to the many terms that are defined throughout this section, Intended Outboard Sidewall is (1) the sidewall that contains a whitewall, bears whi[...]

studded tires. Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires. TIRE CHAINS CAUTION Tire chains/cables should not be installed on P245/40VR19 size tires. Installation of the tire chains/cables on P245/40VR19 size tires will cause damage to the ve- hicle. If you plan to us[...]

Wheel nut tightening torque: 83 ft-lb (112 N·m) The wheel nuts must be kept tight- ened to specifications at all times. It is recommended that wheel nuts be tightened to specification at each tire rotation interval. WARNING ● After rotating the tires, check and adjust the tire pressure. ● Retighten the wheel nuts when the vehicle has been driv[...]

Replacing wheels and tires When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recommended types and sizes are shown in “Wheels and tires” in the “T echnical and consumer information” section of this manual. WARNING ● The use of tires other than those recom- mended or the[...]

● For additional information regarding tires, refer to “Important Tire Safety Information” (US) or “Tire Safety Infor- mation” (Canada) in the Warranty In- formation Booklet. Care of wheels ● W ash the wheels when washing the vehicle to maintain their appearance. ● Clean the inner side of the wheels when the wheel is changed or the un[...]

MEMO 8-44 Maintenance and do-it-yourself[...]

9 T echnical and consumer information Capacities and recommended fuel/lubricants .........9 - 2 Fuel Recommendation ..........................9 - 3 Engine oil and oil filter recommendations ..........9 - 5 Air conditioner system refrigerant and oil recommendations ..............................9 - 6 Specifications ..................................[...]

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedure described in the “Maintenance and do-it-yourself” section to determine the proper refill capacity. Capacity (Approximate) Recommended Fluids and Lubricants US measure Imp measure Liter Fuel 20 gal 16-5/8 gal 75.[...]

FUEL RECOMMENDA TION NISSAN recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) . If unleaded premium gaso- line is not available, you may use unleaded regular gasoline with an octane rating of at least 87 AKI number (Research octane number 91) , but you ma[...]

● If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol) . It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors. If not properly formu- lated with appropriate cosolvents and corrosion inhibitors, such methanol blends may cause fuel system damage and/or vehicl[...]

ENGINE OIL AND OIL FIL TER RECOMMENDA TIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Capacities and recommended fuel/lubricants” earlier in this section. NISSAN recommends the use of an energy conserving oil in order to improv[...]

Y our engine was filled with a high-quality engine oil when it was built. Y ou do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: ● repeated short distance drivin[...]

ENGINE Model VQ35DE T ype Gasoline, 4-cycle, DOHC Cylinder arrangement 6-cylinder, V-block, Slanted at 60° Bore x Stroke in (mm) 3.760 x 3.205 (95.5 x 81.4) Displacement cu in (cm 3 ) 213.45 (3,498) Firing order 1–2–3–4–5–6 Idle speed No adjustment is necessary. CVT (in “N” position) Ignition timing (degree B.T .D.C. at idle speed) C[...]

WHEELS AND TIRES Wheels 18 x 8.0JJ 19 x 8.0JJ Tires P245/45VR18 P245/40VR19 P245/40WR19 Spare tire T145/80D17 Speed rating 18” V 19” V 19” W DIMENSIONS AND WEIGHTS Overall length in (mm) 190.6 (4,843) Overall width in (mm) 73.2 (1,860) Overall height in (mm) 57.9 (1,472) Front T rack 18 inch tire in (mm) 62.4 (1,585) 19 inch tire in (mm) 62.4[...]

When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle’s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where app[...]

ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F .M.V .S.S./C.M.V .S.S. CERTIFICA TION LABEL The Federal/Canadian Motor V ehicle Safety Standard (F .M.V .S.S./C.M.V .S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross V ehicle W eight Ratings (GVWR) , Gross Axle Wei[...]

TIRE AND L OADING INFORMA TION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. AIR CONDITIONER SPECIFICA TION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. T o mount the front license plate, attach the li- cense plate bracket to the pla[...]

WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. ● Be sure everyone in your vehicle is in a seat and using a se[...]

VEHICLE L OAD CAP ACITY Do not exceed the load limit of your ve- hicle shown as “The combined weight of occupants and cargo” on the Tire and Loading Information label. Do not exceed the number of occupants shown as “Seating Capacity” on the Tire and Load- ing Information label. T o get “the combined weight of occu- pants and cargo” , ad[...]

Steps for determining correct load limit 1. Locate the statement “The combined weight of occupants and cargo should never exceed XXX lbs or XXX kg” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX [...]

5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the av[...]

WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION ● Do not tow a trailer or haul a heavy load for the first 500 miles (800 km) . Y our engine, axle or other parts could be damaged. ● For the first 500 miles (800 km) that you tow [...]

T emperature conditions also can affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The trans- mission high fluid temperature protection mode, which helps reduce the chance of transmission damage, could activate and automatically de- crease engine powe[...]

Maximum Gross V ehicle Weight (GVW)/maximum Gross Axle W eight (GA W) The GVW of the towing vehicle must not exceed the Gross V ehicle W eight Rating (GVWR) shown on the F .M.V .S.S./C.M.V .S.S. certification label. The GVW equals the combined weight of the unloaded vehicle, passengers, luggage, hitch, trailer tongue load and any other optional equ[...]

4,546 lb. (2062 kg) GVWR – 4,446 lb. (2016 kg) GVW = 100 lb. (45 kg) Available for tongue weight 1,000 lb. (454 kg) Capacity available for towing 100 lb. (45 kg) Available tongue weight / 1,000 lb. (454 kg) Available capacity = 10 % tongue weight The available towing capacity may be less than the maximum towing capacity due to the passen- ger and[...]

● The threaded shank of the hitch ball must be long enough to be properly secured to the ball mount. There should be at least 2 threads showing beyond the lock washer and nut. Ball mount The hitch ball is attached to the ball mount and the ball mount is inserted into the hitch receiver. Choose a proper class ball mount based on the trailer weight[...]

T railer lights CAUTION When splicing into the vehicle electrical system, a commercially available power- type module/converter must be used to provide power for all trailer lighting. This unit uses the vehicle battery as a direct power source for all trailer lights while using the vehicle tail light, stoplight and turn signal circuits as a signal [...]

● When backing up, hold the bottom of the steering wheel with one hand. Move your hand in the direction in which you want the trailer to go. Make small corrections and back up slowly . If possible, have someone guide you when you are backing up. Always block the wheels on both vehicle and trailer when parking. Parking on a slope is not recommende[...]

2. When the trailer sway stops, gently apply the brakes and pull to the side of the road in a safe area. 3. T ry to rearrange the trailer load so it is bal- anced as described earlier in this section. ● Be careful when passing other vehicles. Passing while towing a trailer requires con- siderably more distance than normal pass- ing. Remember, the[...]

DO T (Department of T ransportation) Quality Grades: All passenger car tires must conform to federal safety requirements in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: T readwear 200 Traction AA T emperature A T readwear The treadwear grad[...]

Y our NISSAN vehicle is covered by the following emission warranties: For USA 1. Emission Defects W arranty 2. Emissions Performance W arranty Details of this warranty may be found with other vehicle warranties in your W arranty Information Booklet which comes with your NISSAN vehicle. If you did not receive a W arranty Information Booklet, or it i[...]

Additional information concerning motor vehicle safety may be obtained from T rans- port Canada’s Road Safety Information Centre at 1-800-333-0371 or online at www .tc.gc.ca/roadsafety (English speak - ers) or www .tc.gc.ca/securiteroutiere (French speakers) . T o notify NISSAN of any safety concerns please contact our Consumer Information Centre[...]

These data can help provide a better understand- ing of the circumstances in which crashes and injuries occur. NO TE: EDR data are recorded by your vehicle only if a nontrivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g. name, gender, age and crash location) are recorded. Howeve[...]

MEMO 9-28 T echnical and consumer information[...]

10 Index A Air bag (See supplemental restraint s y s t e m ) ..................... 1 - 3 7 Air bag system Front (See supplemental front impact air bag system) ............... 1 - 4 4 Air bag warning light . . . . . . . . . . .1-51, 2-14 Air cleaner housing filter ............ 8 - 1 9 Air conditioner Air conditioner service ........... 4 - 4 7 Air c[...]

Precautions on child restraints . . . . . . . . .1-20, 1-26, 1-30, 1-34 T op tether strap anchor point locations . .1-24 Child safety rear door lock ............ 3 - 6 Chimes, audible reminders ........... 2 - 1 6 Cleaning exterior and interior . . . . . . . . . . .7-2 Clock (models with navigation system) . . .4-11, 4-26 C l o c k s e t ..........[...]

F .M.V.S.S. certification label ........... 9 - 1 0 F o g l i g h t s w i t c h ................. 2 - 3 4 F o l d i n g r e a r s e a t .................. 1 - 5 Front air bag system (See supplemental restraint system) ...... 1 - 4 4 F r o n t s e a t s ..................... 1 - 2 Fuel Capacities and recommended fuel/lubricants ................. 9 -[...]

V ehicle identification number (VIN) plate . .9-9 W arning labels (for SRS) .......... 1 - 5 1 LA T CH (Lower Anchors and T ethers for CHildren) System ...................... 1 - 2 2 License plate Installing the license plate .......... 9 - 1 1 Light Air bag warning light . . . . . . . . .1-51, 2-14 Brake light (See stop light) . . . . . . . . .8-2[...]

Power outlet ................. 2 - 3 8 Power rear windows ............. 2 - 4 4 Power steering fluid ............. 8 - 1 3 Power steering system ........... 5 - 2 4 Power windows ............... 2 - 4 3 Rear power windows ............ 2 - 4 4 Precautions Maintenance precautions . . . . . . . . . . .8-5 Precautions on child restraints . . . . . . . [...]

Supplemental front impact air bag system . . .1-44 Supplemental restraint system Information and warning labels ....... 1 - 5 1 Precautions on supplemental restraint s y s t e m .................... 1 - 3 7 Supplemental restraint system (Supplemental air bag system) ......... 1 - 3 7 Switch A u t o l i g h t s w i t c h............... 2 - 3 1 Autom[...]

Engine oil pressure warning light ...... 2 - 1 2 Hazard warning flasher switch ........ 6 - 2 Low fuel warning light . . . . . . . .2-13, 2-24 Low tire pressure warning light ....... 2 - 1 2 Low windshield-washer fluid warning l i g h t ...................... 2 - 2 4 Passenger air bag and status light ..... 1 - 4 6 Seat belt warning light .........[...]

RECOMMENDED FUEL: NISSAN recommends the use of unleaded pre- mium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96) . If unleaded premium gaso- line is not available, you may use unleaded regu- lar gasoline with an octane rating of at least 87 AKI number (Research octane number 91) , but you may[...]

® 2013 M AXI M A OWN E R’S MAN UAL For y our s afety , read car efully and keep in this v ehicle. 2013 N IS SAN MAX I MA A35-D Printing : February 2013 (12) Publication No.: Printed in U .S.A. A35-D OM3E 0A35U1[...]