NEC NLT-40W инструкция обслуживания

Owner’ s Manual Model : N L T -40W 40" W ide LCD Color TV 2 W ar nings WARNING : To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. The appliance is not intended for use by young childr[...]

3 Location Position your TV so that no bright light or sunlight will shine directly on the screen. Do not expose the TV to vibration, moisture, dust or heat. Also ensure that the TV is placed in a position that allows a free flow of air. Do not cover the ventilation openings on the back cover. You can place it on a table-top. Cleaning Unplug the TV[...]

6 Supplied Accessor ies L Make sure the following accessories are provided with Product. 3. Remote controller 5. Owner’s manual 4. PC ANALOG IN cable 6. PC DIGITAL IN cable 7. PC AUDIO IN cable 2. Batteries (2EA) Owner’s Manual Model : N LT -40W 40" Wide LCD Color TV →→ Battery installation u Inserting batteries 1. Remove the battery c[...]

22 8 Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the front panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode. 2. MUTE Turns the sound on and off. 3. N[...]

10 T ur ning the TV On and Off Press the ON/OFF button on the side panel of the TV to go into standby mode. 1. If the TV is in standby mode, press the POWER button on the remote controller or the TV itself to turn the TV on. 2. Press the POWER button again on the remote controller or the TV itself to turn the TV off. Note : If the TV is on and the [...]

12 Setting up TV Programme Once you have preset the programme, you will be able to use the PR xy or NUMBER buttons to scan the programme you programmed. Programme can be tuned using Auto or Manual programme menu. Auto Programme All programme that can be received are stored by this method. It is recommended that you use Auto programme during install[...]

14 Setting up TV Programme Programme edit This function enables you to delete, copy, move or skip or skip the stored programme. Also you can move some programme to other programme numbers or insert a blank programme data into the selected programme number. 1. Press the MENU button. 2. Select the Setup menu, then press VOL Ïq button. 3. Press the P[...]

16 Sound Control You can select your preferred sound setting; Flat, Music, Movie or Speech and you can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change programme. 1. Press the MENU button. 2. Select the Sound menu, then press VOL Ïq button. 3. Pr[...]

18 Other functions Sleep timer You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time elapses. Press the SLEEP button to select the number of minutes. The display will appear on the screen, followed by 0, 10, 20, 30, 60, 90, 120, 180 and 240 . The ti[...]

20 TELETEXT TEXT On/Off Press the TEXT/MIX button to switch to TELETEXT. The initial page or last selected page appears on the screen. The first page number indicates your selection, while the second shows the current page displayed. 1. Press TEXT button once, displays the Teletext pages. 2. Press MIX button once more, displays the Teletext pages s[...]

22 Exter nal Equipment Connection You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below. When connecting to other equipment, please ensure you turn the main switch OFF to prevent any damage to the equipment. Antenna connection 1. Connect RF out on the VCR to the Antenna input on the rear of the TV[...]

Connecting PC as monitor 24 Resolution Note: a. If possible, use the VESA 1,024x768@60Hz video mode to obtain the best image quality for your LCD monitor. If used under the other resolutions, some scaled or processed pictures may appear on the screen. The set has been pre- adjusted to the mode VESA 1,024x 768 @60Hz. b. Some dot defects may appear o[...]

26 Product Spec. Model NLT-40W Main body Horizontal size 1085 mm Thickness 110(280) mm (With stand) Height 632(704) mm Weight 28.5(33) kg Television system PAL-BG, I, DK / SECAN-BG DK / NTSC-M Television programme VHF: 2~13 UHF: 21~69 Cable: S1~S41 LCD Panel 40” wide TFT LCD panel Power consumption 220W External antenna impedance 75 Ω Audio out[...]

28 NEC Australia Pty. Ltd. ABN 86 001 217 527 Home Electronics Group NEC Service Centr es New South Wales Sydney 184 Milperra Rd, Revesby 2212 (02) 9780 8688 Newcastle 120 Parry Street, Newcastle West 2302 (02) 4926 2466 Victoria Melbourne Unit1/6, Garden Road, Clayton, 3168 (03) 8562 6245 Queensland Brisbane Unit 4/305 Montague Road, West End, 410[...]