NEC NLT-17WF инструкция обслуживания

Owner’ s Manual Model: NL T -17WF 17.1" WIDE TFT LCD TV / MONITOR W ar nings WARNING : To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently. The appliance is not intended for use by young [...]

W ar nings 4 Service Never remove the back cover of the TV, this can expose you to high voltage and other hazards. If the TV does not operate properly, unplug it and call your nearest NEC Service Centre. Connect the antenna cable to the connection marked Ant. (on the rear). For best reception, use an outdoor antenna. Location Position your TV so th[...]

6 Supplied Accessor ies L Make Sure the following accessories are provided with Product. 1. AC/DC adaptor 3. Remote controller 5. Owner’s manual 6. PC IN cable 7. PC Audio IN cable 4. Batteries (type AAA) 2. AC Cord TV/AV I/II LIST SLEEP Q.VIEW MENU PC/ * PSM SSM ARC/ * REVEAL TEXT MIX SIZE HOLD INDEX UPDATE TIME Owner’s Manual Model: NLT -17WF[...]

22 Controls All the functions can be controlled with the remote controller. Some functions can also be adjusted with the buttons on the side panel of the set. Remote controller Before you use the remote controller, please install the batteries. 1. POWER Turns the TV on from standby or off to standby mode. 2. MUTE Turns the sound on and off. 3. NUMB[...]

22 T ur ning the TV On and Of f Standby Setup: The AC-DC adapter and the AC power cord must be set up and connected to have the TV in standby mode ready to be turned on. Press the ON/OFF button on the side panel of the TV to go into standby mode. 1. If the TV is in standby mode, press the POWER button on the remote controller or the TV itself to tu[...]

Setting up TV Programme Once you have preset the programmes, you will be able to use the PR xy or NUMBER buttons to scan the programmes you programmed. Programmes can be tuned using automatic or manual modes. Auto Programme All programmes that can be received are stored by this method. It is recommended that you use Auto programme during installati[...]

Setting up TV Programme Deleting a programme 1. Select a programme to be deleted with the PR xy or VOL Ïq button. 2. Press the RED button once. The selected programme is deleted, all the following programme is shifted up one position. Naming a programme 1. Select a programme to be named with the PR xy or VOL Ïq button. 2. Press the GREEN button. [...]

Sound Control You can select your preferred sound setting; Flat , Music , Movie or Speech . You can also adjust the sound frequency of equalizer, balance. If you switch AVL to on, the set automatically keeps on an equal volume level even if you change programmes. 1. Press the MENU button. 2. Select the Sound menu, then press VOL Ïq button. 3. Pres[...]

18 Other functions You can control other functions; Clock , Blue Back , Auto Sleep , Childlock , Radio , ARC and SLEEP TIMER menu. Clock Setting the clock is necessary in order to use the various timer features of the TV. You can set automatic TV On or Off time. 1. Press the MENU button. 2. Press the PR xy button to select the Special menu. Then pr[...]

Radio Control 20 This function is possible only when the set is in Radio mode.(Radio mode is displayed when the Setting for special menu is radio On.) 1. Use TV/AV button on remote controller to select Radio mode . 2. Press the MENU button to set Radio Setup menu. 3. Press the VOL Ïq button repeatedly to select Mode Auto or Manual . * When the Rad[...]

TELETEXT Special TELETEXT functions Changes Teletext mode Only Teletext mode, text mode superimposed on the TV picture, TV mode Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. Stops the automati[...]

22 Exter nal Equipment Connection S-VIDEO INPUT If using an S-VIDEO source, the picture quality will be improved over a video source. 1. Connect the S-VIDEO output of a VCR to the S-VIDEO input on the TV. 2. Connect the audio cables from the S-VIDEO VCR to the L (MONO), R inputs on the TV. 3. Select S-VIDEO mode by pressing the TV/AV button repeate[...]

Connecting PC as monitor Sound adjustment 1. Press the MENU button. 2. Select the Sound menu, then press VOL Ïq . 3. Press the PR xy button to select the desired sound item; Equalizer, Balance, AVL, Surround or Sound Mode . 4. Press the VOL Ïq button to make desired adjustment. 5. Press the VOL Ïq button in Equalizer to set the Equalizer . 6. Pr[...]

28 Connecting PC as monitor TV/A V I/II LIST SLEEP Q.VIEW MENU PC/ * PSM SSM ARC/ * REVEAL TEXT MIX SIZE HOLD INDEX UPDA TE TIME MENU Picture Ș Sound Ș H/V Position Ș Auto Reset 1280 x 768 60Hz Position : ƇƉ Next : ȖȘ Exit : TV/AV Picture Contrast 60 Brightness 80 Temperature 6500K Clock 50 Phase 34 ARC 16:9 Position : ƇƉ Back : MENU Adjus[...]

T roubleshooting No picture on screen and no sound from speakers No picture/No picture from AV terminal Picture is displayed, but no sound from the speakers. Picture is too light There are stripes on the screen or colors fade. Picture is too dark. Remote control does not work. The picture is not sharp. The picture moves. The picture is doubled or t[...]

500-028Z041028[...]