NEC MDG3-BNDL1 инструкция обслуживания

MD2 1 1G3 MD211G3 paper manual.indb 1 MD211G3 paper manual.indb 1 3/27/12 11:18:27 AM 3/27/12 11:18:27 AM[...]

Registration Inf ormation Dec laration Declaration of the Man ufacturer Declaration of the Man ufacturer Means of Conformity Device Classifi cation: Class I, non-measuring function Applicable Rules: Annex IX, Rules 1.4 (Section 1) and 1.1 (Section 3) Product Name: MD21 1G3 21.3” Diagnostic Imaging Grayscale LCD Monitor Model Number: MD21 1G3 UMD[...]

NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally- friendly products, and always strive to help defi ne and comply with the latest independent standards from age[...]

MD211G3 paper manual.indb 4 MD211G3 paper manual.indb 4 3/27/12 11:18:29 AM 3/27/12 11:18:29 AM[...]

English-1 English Inde x W arning, Caution ..........................................................................................................................English-2 Intended Use ................................................................................................................................English-3 Recommended use ........[...]

English-2 TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT T O RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOL T AGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SER VICE PE[...]

English-3 English Intended Use The MD21 1G3 Grayscale display is intended to be used for displaying and viewing of digital images for diagnosis by trained physicians. T o guarantee the display performance as specifi ed, it must only be used in conjunction with NEC approved display controllers. MD21 1G3 cannot be used for a life-support system. Thi[...]

English-4 Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE LCD MONIT OR: W ARNING: Do not modify this equipment without authorization of the manufacturer . W ARNING: T o disconnect this product from the mains supply disconnect the mains plug from the socket outlet. W[...]

English-5 English Image P ersistence: When a residual or “ghost” image of a previous image remains visible on the screen, this is called image persistence. Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. T o alleviate image persistence, tur[...]

English-6 Contents Y our new NEC monitor box* should contain the following: • MD21 1G3 monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Video Signal Cable (DVI-D to DVI-D cable)* 1 • DisplayPort cable • USB Cable • Quick Reference Guide • CD-ROM x 2 Quick Reference Guide DVI-D to DVI-D cable* 1 DisplayPort cable CD-RO[...]

English-7 English Quic k Star t T o connect the LCD monitor to your system, follow these instructions: NO TE: Make sure to read “Recommended Use” before installation. In order to display the maximum resolution, a display controller that can output a resolution of 1536 x 2048 (in portrait mode) or 2048 x 1536 (in landscape mode) is needed. 1. T [...]

English-8 4. Connect all cables to the appropriate connectors ( Figure C.1 ). When using the USB cable, connect the B type connector to the USB upstream port on the right back side of the monitor and the A type connector to the downstream port on the computer ( Figure C.1a ). If using the cord from a USB device, plug into one of the downstream port[...]

English-9 English 7. Slide down the cable cover ( Figure D .1 ). 8. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet. NO TE: Please refer to the Caution section of this manual for proper selection of an AC power cord. Figure D .1 9. T urn on the monitor with power switch on the top ([...]

English-10 Contr ols OSD (On-Screen Displa y) control b uttons on the fr ont of the monitor function as f ollows: T o access the OSD menu, press the EXIT button. T o change the signal input, press the SELECT button. All buttons are located at the back of the monitor . The Key Guide appears pressing any button when not in the OSD control menu. NO TE[...]

English-11 English SETTING OSD LANGU A GE • Set the OSD language before using OSD functions. • Use the control keys (LEFT/RIGHT or UP/DOWN or EXIT) to access the “LANGUAGE SELECTION” menu. • Press the LEFT/RIGHT or UP/DOWN buttons to select the desired OSD language. • T o exit from this OSD menu, press the EXIT button. NO TE: Setting th[...]

English-12 Specifi cations Monitor Specifi cations MD211G3 Monitor Notes LCD Module Diagonal: Viewable Image Size: Native Resolution (Pixel Count): 54.0 cm/21.3 inches 54.0 cm/21.3 inches 1536 x 2048 (Portrait) 2048 x 1536 (Landscape) Active matrix; thin fi lm transistor (TFT) liquid crystal display (LCD); SA-SFT (IPS) 0.212 mm dot pitch; 1450 c[...]

MD211G3 paper manual.indb 13 MD211G3 paper manual.indb 13 3/27/12 11:19:14 AM 3/27/12 11:19:14 AM[...]

Printed on recycled paper Printed in China Part No. 1E507781 NEC Display Solutions, Ltd. 4-28, Mita 1-chome, Minato-ku, T okyo, Japan NEC Display Solutions of America, Inc. 500 Park Blvd. Suite 1 100 Itasca, Illinois 60143 USA Phone: 630.467.3000 Fax: 630.467.3010 NEC Display Solutions Europe GmbH Landshuter Allee 12-14 D-80637 Muenchen Germany Pho[...]