Napoleon Fireplaces fireplaces инструкция обслуживания

1 W415-0319 / E / 01.17.07[...]

2 W415-0319 / E / 01.17.07 Hood Louvre Bracket Hinge Screen Louvre Installation & Removal Heat Shield S tand Off Removal Logo Placement 16-17 OPTIONS Patented Catalytic Glass Door Blower Installation 18-19 OPERA TION / MAINTENANCE Operating Instructions Maintenance Catalytic Tile Maintenance Oxygen Depletion Sensor Pilot Cleaning Pilot Flame Ap[...]

3 W415-0319 / E / 01.17.07 NAPOLEON gas fireplaces are manufactured under the strict Standard of the world recognized ISO 9001 : 2000 Quality Assurance Certificate. NAPOLEON products are designed with superior components and materials, assembled by trained craftsmen who take great pride in t heir work. The burner and valve assembly are leak and tes[...]

4 W415-0319 / E / 01.17.07 This fireplace may be installed in an aftermarket per- manently located, manufactured (mobile) home, where not pr ohibited by local codes . This fireplace is only for use with the type of gas indi- cated on the r a ting plate . This fire place is not convert- ible for use with other gases, unless a certified kit is used. [...]

5 W415-0319 / E / 01.17.07 This heater shall not be installed in a confined space or unusually tight construction unless pro- visions are provided for adequate combustion and ventila tion air . In order to avoid the possibility of exposed insu- lation or vapour bar rier coming in contact with the fire place body , it is r ecommended tha t the walls[...]

6 W415-0319 / E / 01.17.07 50 If in this example a solid door separates Room 1 from Room 2, the volume of Room 2 could not be used. In this case the maximum BTU/h would be: Maximum BTU/h: 800 x 1000 = 16,000 BTU/h This would be considered a confined space since it can not support the 30,000BTU/h input of the heater and it would be necessary to prov[...]

7 W415-0319 / E / 01.17.07 FIGURES 4 a-d PENINSULA OPEN-END SEE-THRU 4-SIDED[...]

8 W415-0319 / E / 01.17.07 Note: In order to avoid the possibility of exposed insula- tion or vapour barrier coming in contact with the fireplace body , it is recommended that the walls of the fireplace enclosure be “finished” (ie: drywall/sheetrock), as you would finish any other outside wall of a home. This will ensure that clearance to combu[...]

9 W415-0319 / E / 01.17.07 Combustible materials may be installed flush with the front of the fireplace but must not cover any of the black face- areas of the fireplace. Non-combustible material (brick, stone or ceramic tile) may protrude in these areas. It is not necessary to install a hearth extension with this fireplace system. When roughing in [...]

10 W415-0319 / E / 01.17.07 FIGURE 14 Note: In order to avoid the possibility of exposed insula- tion or vapour barrier coming in contact with the fireplace body , it is recommended that the walls of the fireplace enclosure be “finished” (ie: drywall/sheetrock), as you would finish any other outside wall of a home. This will ensure that clearan[...]

11 W415-0319 / E / 01.17.07 Install the base panels as illustrated in steps 1-4 on page 9. Both side panels sit under the bracket tab . Holding the side panel in position, bend down the tab to secure. [DE- T AIL 6]. DRYWALL DRYWALL 4" MIN FIGURE 17 Note: In order to avoid the possibility of exposed insula- tion or vapour barrier coming in cont[...]

12 W415-0319 / E / 01.17.07 Combustible materials may be installed flush with the front of the fireplace but must not cover any of the black face- areas of the fireplace. Non-combustible material (brick, stone or ceramic tile) may protrude in these areas. It is not necessary to install a hearth extension with this fireplace system. When roughing in[...]

13 W415-0319 / E / 01.17.07 PHAZER TM logs, glowing and charcoal embers, exclusive to Napoleon fireplaces, provide a unique and realistic glow- ing effect that is dif ferent in every installation. T ake the time to carefully position the embers for a maximum glowing effect. Figures 21 A - H. 1 . Place log #1 diagonally across the textured burner co[...]

14 W415-0319 / E / 01.17.07 The curtain mesh must be kept fully closed during opera- tion to help prevent accidental burns from occurring. The heater must not be used when the hood is re- moved. Hook the hood over the lip of the curtain support plate. Combustible mantle clearance can vary according to the mantle depth. Use the graph to help evaluat[...]

15 W415-0319 / E / 01.17.07 L36 L OUVRE INST ALLA TION FIGURE 32 a-c HOOD Attach the hood by pressing the top flange into the clips along the top of the louvre opening. Secure using a screw through the centre slot. LOWER LOUVRES Insert the hinge clips into the slots located at the bottom left and right corners of the unit. T o remove the louvres, p[...]

16 W415-0319 / E / 01.17.07 Notes: Ornamental insets can not be used in conjunction with the catalytic door When using a catalytic door , glassed doors must be used on all other side or end openings. This unique patented catalytic system was designed to provide unparalleled safety and peace of mind. The top of the door contains four catalytic tiles[...]

17 W415-0319 / E / 01.17.07 Remove the thermodisc bracket from the top of the firebox. Remove the thermodisc from the bracket supplied in the blower kit and install the thermodisc into the fireplace bracket. Then replace the bracket in the location it was removed. Connect the two ends of the unattached wires by the bracket to the thermodisc. Connec[...]

18 W415-0319 / E / 01.17.07 When lighting and re-lighting, the gas knob cannot be turned from pilot to off unless the knob is depressed. 1. STOP! Read the above safety information on this la- bel. 2. Set the thermostat to lowest setting. 3. Turn off all electric power to the fireplace. 4. Open the control door . Turn the gas knob clockwise to off. [...]

19 W415-0319 / E / 01.17.07 THIS PROCEDURE MUST BE PERFORMED BY A QU ALIFIED SERVICE PERSON! Inspect the pilot for any visible contamination or debris (usually lint, pet hair , spider webs, carpet fibre, etc.) and remove. Disconnect the pilot from the pilot tubing line. Using a 7 / 16 ” wrench, remove the injector from the pilot housing. Blow out[...]

20 W415-0319 / E / 01.17.07 Contact your dealer for questions concerning prices and availability of replacement parts. Normally all parts can be ordered through your Napoleon dealer or distributor . # P ART No . DESCRIPTION 1* W361-0016 GLOWING EMBERS 2* W550-0001 CHARCOAL EMBERS 3* GD660 ST ANDARD W ALL SWITCH & 20 FT OF WIRE 4* W385-0245 NAPO[...]

21 W415-0319 / E / 01.17.07[...]

22 W415-0319 / E / 01.17.07 Main burner goes out; pilot stays on. Pilot flame is not large enough or not engulfing the thermopile - service or replace Oxygen Depletion Sensor System - correct piping and/or regulator to provide correct pressure Thermopile shorting - clean thermopile connection to the valve. Reconnect. - replace Oxygen Depletion Sens[...]

23 W415-0319 / E / 01.17.07 White / grey film forms on the glass of the optional cata- lytic door . Sulphur from fuel is being deposited on glass, logs or combustion chamber sur- faces. - clean the glass with a recommended gas fireplace glass cleaner . DO NOT CLEAN GLASS WHEN HOT . If deposits are not cleaned off regularly , the glass may become pe[...]

24 W415-0319 / E / 01.17.07 W olf Steel Fir eplace Ser vice Histor y This fireplace must be serviced annually depending on usage. Date Service T echnician Name Service Performed Special Concerns Dealer Name[...]