Moffat GSC 5061 инструкция обслуживания

GAS COOKER GSC 5061 GB[...]

2[...]

3 CONTENTS Instructions for the user Inst ructions for the installer Important Safety Information Description of the appliance Technical Features Using the appliance - Using the oven - Hints & Tips - Using the Grill - Using the Hob Maintenance and Cleaning Something Not Working Service & Spare Parts Customer Care Guarantee conditions 4 5 6 [...]

4 IMPORTANT SAFETY INFORMATION Installation • This cooker must be installed by qualified personnel, according to the manufacturer’s instructions and to the relevant British Standards. • This cooker is heavy. Take care when moving it. • Any gas installation must be carried out by a registered CORGI installer. • Remove all packaging before [...]

5 DESCRIPTION OF THE APPLIANCE Contr ol panel Oven door wi th glass Handl e do or Ad just able small f eet Hob 2 1 3 4 2000W 2000W 1000W 2600W semi -rapi d semi -rapi d aux iliar y rapid 1. Front left burner (semi-rapid) 2. Back left burner (semi-rapid) 3. Back right burner (auxiliary) 4. Front right burner (rapid) Control panel Model : GSC 5061 W [...]

6 TECHNICAL FEATURES Free standing Class 1 Hob Pan support Front right Back right Front left Back left Enamelled Rapid Auxiliary Semi rapid Semi rapid 2,60kW 1,00kW 2,00kW 2,00kW Oven Oven Oven power Grill Grill power Gas 3,20kW Gas 2,50kW Accessories Oven grid Roasting tray Roasting grid Protective screen Chromed Enamelled Chromed Enamelled Dimens[...]

7 USING THE APPLIANCE Before the First Use of the Cooker Remove all packaging both inside and outside of the cooker, before using it. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1. Remove the oven accessories and ensure all packaging has been removed. 2. Ignit[...]

8 Ignition Attention: when turning on the oven and grill burner the oven door has to be opened. • Open the ov en door and lift the small lid on the bottom of the cavity , push and turn the control knob to the left to position 9, keeping the control knob pressed. • At the same time, push the electronic ignition knob (see fig). Keep it pushed unt[...]

9 Hints and Tips Condensation and steam When food is heated it produces steam in the same way as a boiling kettle. The oven vents allow some of this steam to escape. However, alw ays stand back from the ov en w hen opening the oven door to allow any build up of steam or heat to release. If the steam comes into contact with a cool surface on the out[...]

10 Using the Grill When using the grill it has to be supervised, the oven door opened the protective screen “A” in its place. Heat comes from the top of the oven. It is suitable for grilling meat (beef bacon, pork bacon …) that remains tender, for toast or to brown already cooked. Grill burner ignition Attention: when turning on the oven and [...]

11 Heat comes from the top of the oven. It is suitable for grilling meat (beef bacon, pork bacon …) that remains tender, for toast or to brown already cooked dishes. Grilling meat When using the grill it has to be supervised, the oven door opened the protective screen “A” in its place. Attention: when turning on the oven and grill burner the [...]

12 OR Lack of pow er • Push the corresponding knob in completely and turn it le f t t o th e sy m bo l “ l ar ge fl a me ” simbol and ignite with a match. • Release the knob and watch that the burner has ignited. Upon ignition, adjust the flame as required. • If for any reason the flame should extinguish turn off the relevant control knob[...]

13 MAINTENANCE AND CLEANING The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Before cleaning, ensure all control knobs are in the OFF position, and the appliance has cooled completely . Before any maintenance or cleaning can be carried out, you must DISCONNECT th[...]

14 DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panel may shatter. If the door glass panel becomes chipped or has deep scratches, the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Contact your local Service Centre who will be pleased to adv[...]

15 SOMETHING NOT WORKING If the appliance is not working correctly, please carry out the f ollowing checks, before contacting your local Service Force Service Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge w ill be made even if the appliance is under gua[...]

16 SERVICE AND SPARE PARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centr[...]

17 GUARANTEE CONDITIONS Standard Guarantee Conditions We Moffat undertake that if, within 12 months of t he date of the purchase, this Moffat appliance or any part thereof is proved to be defective by any reason onl y of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials or c[...]

18 INSTRUCTIONS FOR THE INSTALLER SAFETY ADVICE • Before installation ensure that the local distribution conditions (gas type and pressure) and the pre-setting of the appliance are consistent. • This appliance must be installed only in a room with good ventilation. • This appliance must not connected to a flu. It has to be installed and conne[...]

19 TECHNICAL DATA Table no.1 (Cat : II 2H3+ ) Cons Burner Normal power (kW) Economic power (kW) By- pass (mm) Gas Type Pressure (mbar) Nozzle diameter (mm) m 3 /h g/h RAPID 2.60 0.72 0.42 Natural Gas Butane Propane 20 mbar 28-30mbar 37mbar 1.12 0,86 0,86 0.248 188,8 SEMI- RAPID 2.00 0.43 0.32 Natural Gas Butane Propane 20 mbar 28-30mbar 37mbar 0.96[...]

20 Ventilation The room containing the cooker should have an air supply in accordance with B.S. 5440: Part 2: Current Editions. The following requirements for ventilation must be met. The cooker should not be installed in a bed sitting room with a volume of less than 20m 3 , if it is installed in a room of volume less 5m 3 an air vent of effective [...]

21 GAS CONNECTIONS Your cooker is delivered adjusted for the kind of gas stated on the rating plate If the appliance is supplied with natural gas and the pressure for natural gas is 20mbar. The following methods of connection to the gas supply must be used: Right Hand Connection (from front) Ensure that the rubber hose is not in contact with any pa[...]

22 The appliance flexible connector should not be subjected to undue forces either in normal use or whilst connected or disconnected; - The socket which the plug of the appliance flexible connector fits should be permanently attached to a firmly fixed gas installation pipe and positioned such that the appliance flexible connector hose hangs freely [...]

23 Electrical connection Important In any connection way the appliance has to be grounded, in accordance with the national rules in force. We decline any responsibility in case of accidents due to no grounding or w rong grounding. Fuse capacity: 5 A Note: Check on the rating plate the value for the total connection power for establishing the fuse p[...]

24 CONVERSION OF GAS Your cooker is designed to work with natural gas, and is convertible for use with propane or butane. The LPG conversion kit is available from your Service Force Centre and must be fitted by a Corgi Registered engineer. For changing the gas type it is necessary to: • replace the nozzles (hob, oven and grill); • adjust the mi[...]

25 Table no.2 Air adjusting (mm) Gas type Oven Grill G20 2,5 25,5 G30 3,5 24 G31 3,5 24 Replace the nozzles of the oven burners Oven burner To replace the gas oven nozzle, follow this procedure: • Check the table no.1 for diameter of nozzle; • Remove the oven removable base panel; • Remove the screw on the oven burner rod at the rear of the o[...]

26 Adjustment of minimum level Oven burner • Remove the top pan support as well as the burner caps and the burner crowns. • Unscrew and remove the 2 top plate fixing screws and remove the top plate. • Light the burner knob on position 9 and leave the oven door closed for about 10 min. • Turn the knob slowly to position 1. • Pull off the k[...]

.[...]