Mitsubishi Electronics XL6U инструкция обслуживания

EN – 1 ENGLISH XL6 LCD PROJECT OR MODEL XL6U User Manual This User Manual is important to you. Please read it before using your projector.[...]

EN – 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “da[...]

EN – 3 ENGLISH Contents Trademark, Registered trademark Macintosh is registered trademark of Apple Computer Inc. Other brand or product names are trademarks or registered trademarks of their respective holders. Declaration of Conformity Model Number : XL6U T rade Name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics Americ[...]

EN – 4 Important safeguards Please read all these instructions regarding your LCD projector and retain them for future reference. Follow all warnings and instructions marked on the LCD projector . 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions The safety and o[...]

EN – 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector . It may cause fire or electric shock. In this case, unplug immediately and contact your dealer . Never remove the cabinet. This projector contains high voltage circuitry . An inadv[...]

EN – 6 Overview POWER STATUS VIDEO KEYSTONE ENTER MENU COMPUTER AUTO POSITION 4 1 2 3 5 6 7 8 9 POWER STATUS VIDEO KEYSTONE ENTER MENU COMPUTER AUTO POSITION 10 11 10 1 2 3 4 5 7 8 9 6 2 10 5 4 3 1 9 8 6 7 11 1 Remote control sensor (Front) 2 Control panel 3 Speaker 4 T erminal panel 5 Air outlet grille 6 Kensington Security Lock Standard connect[...]

EN – 7 ENGLISH Bottom side 3 1 2 1 2 4 5 6 7 8 9 10 11 3 13 12 MENU ENTER VIDEO COMPUTER 16:9 STILL EXP AND VOLUME KEYSTONE - + MUTE AUT O POSITION 1 Lamp cover 2 Air inlet grille / Filter cover 3 Adjustment feet (Left/Right) Caution: Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may [...]

EN – 8 Remote control 20˚ 15˚ 20˚ 15˚ 30˚ 30˚ 20 ˚ 20 ˚ Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries from[...]

EN – 9 ENGLISH Installation Layout of the projector Image size varies depending on the distance between the screen and the projector . Front projection Front projection, ceiling mounting For ceiling mounting, you need the ceiling mount kit designed for this projector . Ask a specialist for installation. For details, consult your dealer . • The [...]

EN – 10 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player , and personal computer that have analog RGB output connectors. Important: • Make sure that the connected device is turned off before starting connection. • Plug in the power cords of the projector and the connected dev[...]

EN – 11 ENGLISH Projector + Computer Important: • When you use a longer RGB cable instead of the provided cable, the image quality may deteriorate. • Some computers require additional connectors or analog RGB output adapters to be connected with this projector . Contact your dealer for further information. • This projector uses a stereo pin[...]

EN – 12 Preparation Important: • Install the screen on a flat wall at 90 degrees to the floor . • Slanting the projector more than ± 10 ˚ (horizontally) or ± 30 ˚ (vertically) may cause trouble or explosion of the lamp. Y ou can tilt the projector up to 7 degrees using the adjustment feet only . • Images may not be projected in a shape [...]

EN – 13 ENGLISH Basic operation Important: • The projector starts warming up when the POWER button is pressed. During the warm-up process, images may appear dark and no commands are accepted. • By blinking red, the ST A TUS indicator indicates that the lamp should be replaced soon. Replace the lamp when the ST A TUS indicator blinks red. (See[...]

EN – 14 V OLUME 15 Volume from the speaker Press the VOLUME + or – button to change the volume from the speaker . The volume control bar will appear on the screen. • The volume control bar will disappear about 10 seconds after the VOLUME button is released. • The VOLUME buttons don ’ t function while the menu selection bar or the menu is [...]

EN – 15 ENGLISH Menu operation IMAGE XGA60 opt. INSTALLATION opt. XGA60 INSTALLATION opt. AUTO POWER ON AUTO POWER OFF OFF OFF XGA60 AUTO POWER ON AUTO POWER OFF OFF OFF AUTO POWER ON AUTO POWER OFF 30 min OFF Basic operation Several settings can be adjusted using the menu. Example : Auto power off time setting 1. Press the MENU button. 2. Press [...]

EN – 16 Menu operation (continued) INSTALLATION opt. ON BACK COLOR AUTO POWER ON AUTO POWER OFF SPLASH SCREEN MUTE MODE LAMP MODE ON BLUE BLACK OFF IMAGE CAPTURE SETUP OFF STANDARD OFF IMAGE REVERSE XGA60 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE COLOR MATRIX sRGB opt. 1 IMAGE[...]

EN – 17 ENGLISH 3 FEA TURE MENU POSITION . . . Use to select the position of the menu on the screen, 1. (upper left) or 2. (lower right). EXPAND MODE . . Choose the mode for enlarging the image. See page 20. AUDIO MODE ..... Select COMPUTER to output the audio that is input to the AUDIO IN terminal when COMPUTER is chosen as the source. Select VI[...]

EN – 18 Image adjustment CONTRAST R COLOR TEMP.-USER 0 CONTRAST B 0 BRIGHTNESS R 0 BRIGHTNESS B 0 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE COLOR MATRIX sRGB opt. 4. Press the { or } button to select the desired color . • If you want to adjust the balance of all colors of th[...]

EN – 19 ENGLISH Adjustment of the image from the computer This projector adjusts the format of the video signal supplied from the computer . However , sometimes images are not projected correctly owing to the type of the computer used. When the image from the computer isn ’ t projected correctly , press the AUTO POSITION button. (See page 14.) [...]

EN – 20 Advanced features Expand By pressing the EXP AND button on the remote control, you can magnify the image to view the details. Y ou can view the image in its original size in the REAL mode. • The EXP AND mode doesn't work with video or S-video signal. • The EXP AND mode doesn't function with some input signals. For details, s[...]

EN – 21 ENGLISH XL6U XL6U CAPTURE : ENTER X2 CANCEL : MENU CAPTURE : ENTER + ENTER CANCEL : MENU XL6U XL6U CAPTURE : ENTER X2 CANCEL : MENU L VP-XD300 L VP-XD300 Capturing Logo ! x1 x2 FULL Setting of the image displayed during startup or muting Y ou can display your desired image as the startup screen (or splash screen). Using the menu, you can [...]

EN – 22 FEATURE PASSWORD FUNCTION XGA60 opt. LOCK UNLOCK OK OK PASSWORD CONFIRM O K CANCEL FEATURE PASSWORD FUNCTION XGA60 opt. LOCK UNLOCK OK OK PASSWORD O K CANCEL Password function This projector is equipped with the password func- tion that is designed for prevention of theft and wrong operation by children and restriction on operation by oth[...]

EN – 23 ENGLISH Lamp replacement 8. Tighten up the screws (c) using a Phillips screwdriver (+). 9. Tighten up the screw (a) using a Phillips screwdriver (+) to secure the lamp cover . Reset of the lamp operation time Plug in the power cord, turn on the lamp, and reset the lamp operation time by holding down the $ , % , and POWER buttons on the co[...]

EN – 24 Maintenance Cleaning of the projector and the ventilation slots Use a soft cloth to clean the projector and the ventila- tion grilles. When the grilles become dirty , wipe them with a soft cloth dampened with diluted mild deter - gent, and then wipe them with a dry cloth. T o protect the surface of the projector from fading or deteriorati[...]

EN – 25 ENGLISH T roubleshooting The following offers solutions to some of the common problems you may encounter . W e suggest that you consult this chart before contacting your dealer . Images aren't projected on the screen. Problem Power isn't turned on. Images aren't projected on the screen. Images suddenly disappear . "NO [...]

EN – 26 T roubleshooting (continued) Images aren't projected correctly . Problem Projected images are shaking. Projected images are displaced. Projected images are distorted. Projected images are dark. Projected images are blurred. Afterimages persist on the screen. Red, blue, and green dots appear in projected images. Black dots appear in p[...]

EN – 27 ENGLISH Others Cause and solution • This air comes out as a result of cooling the inside of the projector . This isn't a product malfunction. • Check that the volume isn't set to low . • The microcomputers inside the projector may be wrongly operating because of noise. ➔ Press the POWER button to turn off the lamp and un[...]

EN – 28 Indicators POWER STATUS VIDEO KEYSTONE COMPUTER AUTO POSITION POWER Steady red Steady green Steady green ST A TUS Off Blinking green Steady green CONDITION Stand-by Lamp stand-by (about 1 minute) The power is on. (Normal condition) NOTE The POWER button cannot be used to switch between on and off. POWER Steady green or Steady red Steady r[...]

EN – 29 ENGLISH Specifications T ype Model Rated power supply Rated input LCD panels Colors Projection lens Light source lamp Picture size PC compatibility V ideo compatibility Audio output Speaker S-video input V ideo input Audio input Analog RGB input Control connector Outside dimensions W eight Length of power cord T emperature, humidity (perf[...]

EN – 30 Specifications (continued) Connectors 1 R(RED)/C R 2 G(GREEN)/Y 3 B(BLUE)/C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC 5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 TXD IN 2 –– 3 –– 4 GND – 55 V I N 6 CLOCK OUT 7 RXD OUT 8 DATA OUT 1 35 2 68 1 5 11 6 10 15 267 70 82 48.7 267 281 275 261 70 73 SERIAL (8 pin) Pin No. Name [...]

EN – 31 ENGLISH TV60, 480i(525i) – 15.73 59.94 1024 x 768 – *1 TV50, 576i(625i) – 15.63 50.00 1024 x 768 – *1 1080i 60 (1125i 60) – 33.75 60.00 1024 x 576 – *1 1080i 50 (1125i 50) – 28.13 50.00 1024 x 576 – *1 480p (525p) – 31.47 59.94 1024 x 768 – *1 576p (625p) – 31.25 50.00 1024 x 768 – *1 720p 60 (750p 60) – 45.00 60[...]

Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M I T SUBIS HI ELECTRIC CORPORAT I O N MITSUBISHI Projector Contact Information North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www .mitsubishielectric.ca Information T echnologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada [...]

EN – 1 ENGLISH SL6 LCD PROJECT OR MODEL SL6U User Manual This User Manual is important to you. Please read it before using your projector.[...]

EN – 2 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “da[...]

EN – 3 ENGLISH Contents Trademark, Registered trademark Macintosh is registered trademark of Apple Computer Inc. Other brand or product names are trademarks or registered trademarks of their respective holders. Declaration of Conformity Model Number : SL6U T rade Name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics Americ[...]

EN – 4 Important safeguards Please read all these instructions regarding your LCD projector and retain them for future reference. Follow all warnings and instructions marked on the LCD projector . 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions The safety and o[...]

EN – 5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector . It may cause fire or electric shock. In this case, unplug immediately and contact your dealer . Never remove the cabinet. This projector contains high voltage circuitry . An inadv[...]

EN – 6 Overview POWER STATUS VIDEO KEYSTONE ENTER MENU COMPUTER AUTO POSITION 4 1 2 3 5 6 7 8 9 POWER STATUS VIDEO KEYSTONE ENTER MENU COMPUTER AUTO POSITION 10 11 6 1 2 3 4 5 2 10 5 4 3 1 9 8 6 7 11 1 Remote control sensor (Front) 2 Control panel 3 Speaker 4 T erminal panel 5 Air outlet grille 6 Kensington Security Lock Standard connector 7 Foot[...]

EN – 7 ENGLISH Bottom side 3 1 2 1 2 4 5 6 7 8 9 10 11 3 13 12 MENU ENTER VIDEO COMPUTER 16:9 STILL EXP AND VOLUME KEYSTONE - + MUTE AUT O POSITION 1 Lamp cover 2 Air inlet grille / Filter cover 3 Adjustment feet (Left/Right) Caution: Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may [...]

EN – 8 Remote control 20˚ 15˚ 20˚ 15˚ 30˚ 30˚ 20 ˚ 20 ˚ Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries from[...]

EN – 9 ENGLISH Installation Layout of the projector Image size varies depending on the distance between the screen and the projector . Front projection Front projection, ceiling mounting For ceiling mounting, you need the ceiling mount kit designed for this projector . Ask a specialist for installation. For details, consult your dealer . • The [...]

EN – 10 Basic connections This projector can be connected with various devices such as a VCR, video camera, videodisc player , and personal computer that have analog RGB output connectors. Important: • Make sure that the connected device is turned off before starting connection. • Plug in the power cords of the projector and the connected dev[...]

EN – 11 ENGLISH Projector + Computer Important: • When you use a longer RGB cable instead of the provided cable, the image quality may deteriorate. • Some computers require additional connectors or analog RGB output adapters to be connected with this projector . Contact your dealer for further information. • This projector uses RCA jacks fo[...]

EN – 12 Preparation Important: • Install the screen on a flat wall at 90 degrees to the floor . • Slanting the projector more than ± 10 ˚ (horizontally) or ± 30 ˚ (vertically) may cause trouble or explosion of the lamp. Y ou can tilt the projector up to 7 degrees using the adjustment feet only . • Images may not be projected in a shape [...]

EN – 13 ENGLISH Basic operation Important: • The projector starts warming up when the POWER button is pressed. During the warm-up process, images may appear dark and no commands are accepted. • By blinking red, the ST A TUS indicator indicates that the lamp should be replaced soon. Replace the lamp when the ST A TUS indicator blinks red. (See[...]

EN – 14 Basic operation (continued) V OLUME 15 Volume from the speaker Press the VOLUME + or – button to change the volume from the speaker . The volume control bar will appear on the screen. • The volume control bar will disappear about 10 seconds after the VOLUME button is released. • The VOLUME buttons don ’ t function while the menu s[...]

EN – 15 ENGLISH Menu operation IMAGE XGA60 opt. INSTALLATION opt. XGA60 INSTALLATION opt. AUTO POWER ON AUTO POWER OFF OFF OFF XGA60 AUTO POWER ON AUTO POWER OFF OFF OFF AUTO POWER ON AUTO POWER OFF 30 min OFF Basic operation Several settings can be adjusted using the menu. Example : Auto power off time setting 1. Press the MENU button. 2. Press [...]

EN – 16 INSTALLATION opt. ON BACK COLOR AUTO POWER ON AUTO POWER OFF SPLASH SCREEN MUTE MODE LAMP MODE ON BLUE BLACK OFF IMAGE CAPTURE SETUP OFF STANDARD OFF IMAGE REVERSE XGA60 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE COLOR MATRIX sRGB opt. Menu operation (continued) 1 IMAGE[...]

EN – 17 ENGLISH 3 FEA TURE MENU POSITION . . . Use to select the position of the menu on the screen, 1. (upper left) or 2. (lower right). EXPAND MODE . . Choose the mode for enlarging the image. See page 20. AUDIO MODE ..... Select COMPUTER to output the audio that is input to the AUDIO IN terminal when COMPUTER is chosen as the source. Select VI[...]

EN – 18 Image adjustment CONTRAST R COLOR TEMP.-USER 0 CONTRAST B 0 BRIGHTNESS R 0 BRIGHTNESS B 0 CONTRAST IMAGE 0 BRIGHTNESS 0 STANDARD 0 COLOR AUTO 0 XGA60 COMPUTER OFF TINT 0 SHARPNESS COLOR TEMP. GAMMA MODE COLOR MATRIX sRGB opt. 4. Press the { or } button to select the desired color . • If you want to adjust the balance of all colors of th[...]

EN – 19 ENGLISH Adjustment of the image from the computer This projector adjusts the format of the video signal supplied from the computer . However , sometimes images are not projected correctly owing to the type of the computer used. When the image from the computer isn ’ t projected correctly , press the AUTO POSITION button. (See page 14.) [...]

EN – 20 Advanced features Expand By pressing the EXP AND button on the remote control, you can magnify the image to view the details. Y ou can view the image in its original size in the REAL mode. • The EXP AND mode doesn't work with video or S-video signal. • The EXP AND mode doesn't function with some input signals. For details, s[...]

EN – 21 ENGLISH SL6U SL6U CAPTURE : ENTER X2 CANCEL : MENU CAPTURE : ENTER + ENTER CANCEL : MENU SL6U SL6U CAPTURE : ENTER X2 CANCEL : MENU L VP-XD300 L VP-XD300 Capturing Logo ! x1 x2 FULL Setting of the image displayed during startup or muting Y ou can display your desired image as the startup screen (or splash screen). Using the menu, you can [...]

EN – 22 Advanced features (continued) FEATURE PASSWORD FUNCTION XGA60 opt. LOCK UNLOCK OK OK PASSWORD CONFIRM O K CANCEL FEATURE PASSWORD FUNCTION XGA60 opt. LOCK UNLOCK OK OK PASSWORD O K CANCEL Password function This projector is equipped with the password func- tion that is designed for prevention of theft and wrong operation by children and r[...]

EN – 23 ENGLISH Lamp replacement 8. Tighten up the screws (c) using a Phillips screwdriver (+). 9. Tighten up the screw (a) using a Phillips screwdriver (+) to secure the lamp cover . Reset of the lamp operation time Plug in the power cord, turn on the lamp, and reset the lamp operation time by holding down the $ , % , and POWER buttons on the co[...]

EN – 24 Maintenance Cleaning of the projector and the ventilation slots Use a soft cloth to clean the projector and the ventila- tion grilles. When the grilles become dirty , wipe them with a soft cloth dampened with diluted mild deter - gent, and then wipe them with a dry cloth. T o protect the surface of the projector from fading or deteriorati[...]

EN – 25 ENGLISH T roubleshooting The following offers solutions to some of the common problems you may encounter . W e suggest that you consult this chart before contacting your dealer . Images aren't projected on the screen. Problem Power isn't turned on. Images aren't projected on the screen. Images suddenly disappear . "NO [...]

EN – 26 T roubleshooting (continued) Images aren't projected correctly . Problem Projected images are shaking. Projected images are displaced. Projected images are distorted. Projected images are dark. Projected images are blurred. Afterimages persist on the screen. Red, blue, and green dots appear in projected images. Black dots appear in p[...]

EN – 27 ENGLISH Others Cause and solution • This air comes out as a result of cooling the inside of the projector . This isn't a product malfunction. • Check that the volume isn't set to low . • The microcomputers inside the projector may be wrongly operating because of noise. ➔ Press the POWER button to turn off the lamp and un[...]

EN – 28 Indicators POWER STATUS VIDEO KEYSTONE COMPUTER AUTO POSITION POWER Steady red Steady green Steady green ST A TUS Off Blinking green Steady green CONDITION Stand-by Lamp stand-by (about 1 minute) The power is on. (Normal condition) NOTE The POWER button cannot be used to switch between on and off. POWER Steady green or Steady red Steady r[...]

EN – 29 ENGLISH Specifications T ype Model Rated power supply Rated input LCD panels Colors Projection lens Light source lamp Picture size PC compatibility V ideo compatibility Audio output Speaker S-video input V ideo input Audio input Analog RGB input Control connector Outside dimensions W eight Length of power cord T emperature, humidity (perf[...]

EN – 30 Connectors 1 R(RED)/C R 2 G(GREEN)/Y 3 B(BLUE)/C B 4 GND 5 GND 6 GND 7 GND 8 GND 9 DDC 5V 10 GND 11 GND 12 DDC Data 13 HD/CS 14 VD 15 DDC Clock 1 TXD IN 2 –– 3 –– 4 GND – 55 V I N 6 CLOCK OUT 7 RXD OUT 8 DATA OUT 1 35 2 68 1 5 11 6 10 15 267 70 48.7 267 281 275 261 82 70 73 SERIAL (8 pin) Pin No. Name I/O COMPUTER / COMPONENT VI[...]

EN – 31 ENGLISH TV60, 480i(525i) – 15.73 59.94 800 x 600 – *1 TV50, 576i(625i) – 15.63 50.00 800 x 600 – *1 1080i 60 (1125i 60) – 33.75 60.00 800 x 450 – *1 1080i 50 (1125i 50) – 28.13 50.00 800 x 450 – *1 480p (525p) – 31.47 59.94 800 x 600 – *1 576p (625p) – 31.25 50.00 800 x 600 – *1 720p 60 (750p 60) – 45.00 60.00 80[...]

Manufactured by Mitsubishi Electric Corporation 1 Zusho Baba, Nagaokakyo-City , Kyoto Japan M I T SUBIS HI ELECTRIC CORPORAT I O N MITSUBISHI Projector Contact Information North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www .mitsubishielectric.ca Information T echnologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada [...]