MiLAN MIL-S1600 инструкция обслуживания

MIL-S2400 & MIL-S1600 Fast Ethernet Switch 16 or 24 10/100 Mbps auto-sensing ports with optional 1 port 100Mbps Fiber Module User Guide With Optional Fiber 100BASE-TX Extension 100Base-FX with Module with SC/ST/MT-RJ/ VF-45 Multi-mode and Single-mode[...]

Regulatory Approval - FCC Class A - UL 1950 - CSA C22.2 No. 950 - EN60950 - CE - EN55022 Class A - EN55024 Canadian EMI Notice This Class A digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe A respecte toutes les exigences du Reglement sur le materiel brouille[...]

C ontents 1. Introduction …….…………….…………….……….………….…… 1 Features …………………………………………..…..…….… 2 Package Contents ………………………..…..……….……… 3 Ethernet Switching T echnology ………………….…………… 4 2. Hardware Description ……?[...]

Introduction Ethernet Switching Technology Ethernet Switching Technology dramatically increases the total bandwidth of a network, eliminates congestion problems inherent with ( CSMA/CD ) protocol, which greatly reduces unnecessary transmissions. Switch Technology has revolutionized networking. First, by allowing two-way, simultaneous transmissions [...]

Features n Conforms to IEEE 802.3, 802.3u, and 802.3x standard n 16/24x auto-sensing 10/100Mbps Ethernet RJ-45 ports n Automatic MDI/MDIX ports crossover for 10Base-T and 100Base-TX n One Extension Slot for 100Mbps Fiber modules ( Optional ) n Auto-negotiation for 10Mbps and 100Mbps n Back-Pressure-Base flow control on Half-duplex ports n Pause-Fra[...]

Hardware Description This Section mainly describes the hardware of the MIL-S2400 and MIL-S1600 Switches , and gives a physical and functional overview of each Switch. Front Panel The Front Panel of the MIL-S2400 and MIL-S1600 Switches consists of 16 or 24 10/100Base-TX RJ-45 ports ( Auto MDI/MDIX ) and slot for 100Base-FX Fiber Module. The LED Indi[...]

LED Indicators The LED Indicators gives a real-time information of systematic operation status. The following table provides descriptions of LED status and their meaning. Figure 2-2. LED Indicators LED Status Description Green Power On Off Off Green The port is operating at the speed of 100Mbps. 100M Off No device attached or in 10Mbps mode Green T[...]

Rear Panel The 3-pronged power plug, On/Off switch, and ventilation fan are located at the rear panel of the MIL- S2400 and MIL-S1600 Switches as shown in Figure 2-2. The Switch will work in the range 100-240V AC, 50-60Hz. Figure 2-3. The Rear Panel of MIL-S2400 and MIL-S1600 Switches Desktop Installation A. Set the Switch on a sufficiently large f[...]

Rack-mounted Installation The MIL-S2400 and MIL-S1600 switches includes a rack-mounted kit and can be mount in an EIA standard size, 19-inch Rack, enabling the switch to be placed in a wiring closet with other equipment. Perform the following steps to rack mount the switch: A. Position one bracket to align with the holes on one side of the switch a[...]

Optional Fiber Modules This section introduces the optional 100Base-FX Modules which can be installed on the front panel of the MIL-S2400 and MIL-S1600 Switches. Each optional 100Base-FX Module has a one- port fiber connector. The 100Base-FX Modules are designed to extend the distance between switch and other devices. The maximum distance connected[...]

MIL-S2416ST MIL-S2416MT MIL-S2416VF[...]

LED Indicators of 100base-FX The LED-Indicators provide a real-time information of systematic operation status. The following table provides descriptions of LED Indicators status and their meaning. Blinks This fiber port is transmitting data. Off No data is be transmitted. Table 3-1. The Description of LED-Indicators on 100Base-FX Modules Features [...]

Installing 100Base-FX Module The optional 100Base-FX Modules are designed to be inserted in the extension slot. Before installation, ensure that the power is disconnected. The module is NOT hot-swappable. Follow the steps below to install the optional 100Base-FX Module: 1. Power the MIL-S2400 and MIL-S1600 Switches OFF before installing the 100Base[...]

Troubleshooting This section is intended to help you solve the most common problems on the MIL-S2400 and MIL- S1600 Switches. n Faulty or loose cables Look for loose or obviously faulty connections. If they appear to be OK, make sure the connections are snug. IF that does not correct the problem, try a different cable. n Non-standard cables Non-sta[...]

Technical Specification Specifications Standard IEEE 802.3 10Base-T Ethernet, IEEE 802.3u 100Base-TX/FX Fast Ethernet Protocol CSMA/CD Max Forwarding Rate and Max Filtering Rate 14,880 pps per Ethernet port, 148,800 pps per Fast Ethernet port LED Indicators 10/100 UTP Port: 100M, LK/ACT, Full ( 3 LEDs) 100M Fiber Port: TX, RX, Link, FD/COL ( 4 LEDs[...]

P/N: 90000372_A[...]