Linksys SVIEW08 v2 инструкция обслуживания

ProConnect ® Series ProConnect ® 8-Station KVM Switch User Guide Use this Guide to install: SVIEW08 v2[...]

COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. ProConnect is a r egistered trademark of Linksys. Microsoft, Windows, and the Windows logo ar e register ed trademarks of Microsoft Corporation. All other trademarks and brand names ar e the property of their respective pr oprietors. LIMITED W ARRANTY Linksys guarantees that[...]

ProConnect ® Series ProConnect ® 8-Station KVM Switch Introduction The ProConnect ® 8-Station KVM Switch from Linksys lets you tak e instant command o ver multiple desktop or notebook PCs — all from a single ke y- board , mouse, and monitor! Switch betw een PCs with the press of a key , or use the cycling feature to s witch automatically at pr[...]

Getting to Know the ProConnect ® 8- Station KVM Switch On Line P ort LED Orange. Indicates that the computer attached to the cor responding port is up and r unning. Selected P ort LED Green. Indicates the cur rently selected port. This LED will flash when the corresponding por t is accessed under Auto Scan mode. A uto Scan Button Pressing this but[...]

Powe r The P o w er P or t is where y ou will connect the included A C Po w er Adapter . Console ports When using this KVM Switch alone, a monitor , key- board , and mouse are plugged into these ports. If this KVM Switch is being used as a second-stage switch when daisy-chained to another KVM unit, daisy-chain these ports into a CPU Port of the KVM[...]

1. Using one 8-Station KVM Switch as a Primary unit and the other eight 8- Station KVM Switches as Secondary units, use a Cabling Kit to connect the Console ports of the Secondar y Units to the CPU por ts of the Primary unit. In this wa y , the 64 CPU ports of the Secondar y units are a vailab le through the Primary unit. 2. Connect the monitor , k[...]

1. Using one 8-Station KVM Switch as a Primary unit and the other eight 8-Station KVM Switches as Secondary units, use a Cabling Kit to connect the Console ports of the Secondar y Units to the CPU ports of the Primary unit. 2. F or each Secondar y unit, eight T er tiar y units will be connected by using a Cab ling Kit to con- nect the Console ports[...]

If it becomes necessary to pow er do wn an 8-Station KVM Switch, you must perform the following prior to starting it back up: 1. Shut do wn all the PCs that are attached to the 8-Station KVM Switch, along with all other switches and PCs daisy chained. 2. Unplug the switch’ s A C pow er cord. 3. After a minute, reconnect the po wer along with an y[...]

2. T o access a PC attached to Po r t 3 of a T w o Stage installation, w here the PC is attached to Po r t 3 of a Second Stage (or Secondar y) unit that is cascad- ed do wn from Po r t 2 of the First Stage (or Primary) unit, key in 23 for the P or t ID , as follo ws: [CTRL] + [AL T] + [SHIFT] + 2 + 3 + [ENTER] 3. T o access a PC attached to Po r t [...]

T o cancel the cur rent selection on the menu screen, press the ESC key . This will also mo ve back one menu screen and , if on the main menu screen, it will also close the OSD menu. T o mo ve up or do wn through the menu list, press the up or do wn arro ws on your keyboard or click the Up or Do wn T riangles on the menu screen. T o mo ve up or do [...]

• F2 (Scan) Pressing the F2 ke y initiates Quick V iew Scanning, in w hich the OSD cycles through all of the ports that are cur rently selected in the List vie w (see F3 , belo w), and displays each one for the amount of time specif ied with the Set Scan Duration setting (see F6 , Set). When y ou w ant to stop at a particular loca- tion, press th[...]

SETTING Channel Display Mode Channel Display Duration OSD Activating HotKey FUNCTION Selects how the Port ID is displayed: The Port Number plus the Name (PN + NAME); the Port Number alone (PN); or the Name alone (NAME). Determines how long a Port ID displays on the monitor after a port change has taken place: 3 Seconds; or Always On. Selects which [...]

In order to pre vent unauthorized access to the PCs, the OSD pro vides a pass- w ord security feature. If a passw ord has been set, the OSD will request that the user pro vide it before allo wing access. T o set a passw ord: 1. Press the F6 ke y to bring up the setup conf iguration menu. 2. Mo ve the Highlight bar to Set Pass word and press the Ent[...]

Appendix The follo wing table indicates the relationship betw een the number of 8-Station KVM Switches and the number of computers they control: Computer Connection T able 22 T roubleshooting This section pro vides possible solutions to prob lems regarding the installation and operation of the 8-Station KVM Switch. If you can’ t f ind an answ er [...]

24 Dimensions: 14.5” x 9.75” x 1.75” (368mm x 248mm x 44mm) Unit W eight: 120 oz. (3.4 Kg) P ow er: 9V DC 1.62W maximum Certif ications: FCC Class B , CE Mark Commercial Operating T emp: 5ºC to 40ºC (41ºF to 104ºF) Storage T emp: -10ºC to 60ºC (14ºF to 140ºF) Operating Humidity: 10% to 85%, Non-Condensing Storage Humidity: 5% to 90%, [...]

26 Contact Information F or help with the installation or operation of this product, contact Linksys Customer Support at one of the phone numbers or Inter net addresses below . Sales Information 800-546-5797 (LINKSYS) T ech Support 800-326-7114 RMA Issues 949-261-1288 Fa x 949-261-8868 Email support@linksys.com We b http://www .linksys.com FTP Site[...]

© Copyright 2001 Linksys, All Rights Reser ved. http://www .linksys.com[...]