LG Electronics MW 71PY10 инструкция обслуживания

MW -71PY10 MW -71PY10G OWNER’S MANUAL PLASMA MONITOR PLASMA MONITOR Please read this manual carefully before oper- ating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back of the set and quote this information to your dealer when you require service. Model number : Serial[...]

2 Plasma Monitor Warning/Caution W ARNING/CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P AR TS INSIDE. REFER T O QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltag[...]

Owner ’s Manual 3 Safety Instructions IMPORT ANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appara- tus. This information sha[...]

4 Plasma Monitor Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way , such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen in[...]

Owner ’s Manual 5 Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2~4 Introduction Controls and Connection Options . . . . . . . . . .7~8 Remote Control Key Functions . . . . . . . . . . . . . .9 Installation Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 Installation Instruction .[...]

6 Plasma Monitor Introduction Introduction Introduction What is a Plasma Display Panel (PDP)? If voltage is applied to gas within glass panels, ultraviolet rays are produced and fused with a fluorescent substance. At that instant, light is emitted. A Plasma Display is a next generation flat Display using this phenomenon. 160° - Wide angle range of[...]

Owner ’s Manual 7 Introduction Controls Controls INPUT MENU VOL TruSurround XT Front Panel Controls Front Panel Controls MENU Button INPUT Button VOLUME ( F , G ) Buttons E , D Buttons INDEX Switches LED Display on or off. Remote Control Sensor Power Indicator Illuminates red in standby mode, Illuminates green when the monitor is turned on. Sub p[...]

8 Plasma Monitor Introduction Connection Options Connection Options REMOTE CONTROL RS-232C INPUT (CONTROL/SERVICE) AC INPUT DVI INPUT AUDIO INPUT RGB INPUT AUDIO COMPONENT COMPONENT RL VIDEO INPUT 1 INPUT 2 VIDEO INPUT 2 VIDEO INPUT 1 VIDEO MONO AUDIO RL S-VIDEO VIDEO3 VIDEO4 HDMI R ( ) ( ) ( ) ( ) L EXTERNAL SPEAKER Back Connection Panel Back Conn[...]

Owner ’s Manual 9 Introduction - When using the remote control, aim it at the remote control sensor on the monitor . - Under certain conditions such as if the remote IR signal is interrupted, the remote control may not function. Press the key again as necessary . Remote Control Key Functions Remote Control Key Functions Installing Batteries • O[...]

10 Plasma Monitor Installation Installation Installation Ensure that the following accessories are included with your plasma display . If an accessory is missing, please contact the dealer where you purchased the product. Owner ’ s Manual 1.5V 1.5V Batteries Power Cord L I G H T IN P U T MODE PIP MUTE SLEEP VOL CH WIN. SIZE WIN. POSITION SPLIT ZO[...]

Owner ’s Manual 11 Installation 4 inches 4 inches 4 inches 4 inches 2 inches W W all Mount Installation all Mount Installation For proper ventilation, allow a clearance of 4 ” on each side and 2 ” from the wall. Detailed installation instruc- tions are available from your dealer , see the optional W all Mounting Bracket Installation and Setup[...]

12 Plasma Monitor Installation External Equipment Connections External Equipment Connections NOTE: Not all cables shown are included with the plasma display . - T o avoid picture noise (interference), leave an adequate distance between the VCR and Monitor . - Use the ISM Method feature to avoid having a fixed image remain on the screen for a long p[...]

Owner ’s Manual 13 Installation External Equipment Connections External Equipment Connections - After subscribing to a cable monitor service from a local provider and installing a converter , you can watch cable TV program- ming. The monitor cannot display monitor programming unless a TV tuner device or cable TV converter box is connected to the [...]

14 Plasma Monitor Installation • Component Input ports T o get better picture quality , connect a DVD player to the component input ports as shown. - T o watch digitally broadcast programs, purchase and connect a digital set-top box. - This monitor supports HDCP (High-bandwidth Digital Contents Protection) protocol for DVI DTV (480p,720p,1080i) m[...]

Owner ’s Manual 15 Installation How to connect 1. T o get the best picture quality , adjust the PC graphics card to a 1280x1024, 60Hz. Resolutions over UXGA cannot be displayed. 2. Use the monitor ’ s RGB INPUT or DVI (Digital Visual Interface) port for video connections, depending on your PC connector . If the graphic card on the PC does not o[...]

16 Plasma Monitor Installation Monitor Display Specifications (RGB-PC / DVI-PC Mode) Resolution 720x400 640x480 800x600 848x480 Horizontal Frequency(KHz) 31.469 37.927 31.469 35.000 37.861 37.500 43.269 35.156 37.879 46.875 53.674 49.725 31.500 35.000 37.500 31.500 35.000 37.500 48.363 56.476 60.023 54.348 63.995 67.500 60.000 63.981 80.000 70.08 8[...]

Owner ’s Manual 17 Installation HDMI HDMI - HDMI TM , the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC." - This monitor can receive the High-Definition Multimedia Interface(HDMI). - This monitor supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 480p, 720[...]

18 Plasma Monitor Operation Operation Operation Menu Language Selection Menu Language Selection T T urning on the Monitor urning on the Monitor T urning on the Monitor just after installation 1. Connect power cord correctly . At this moment, the Monitor is switched to standby mode. 2. Press the INPUT or button on the Monitor or press the POWER , IN[...]

Owner ’s Manual 19 Operation 1. Press the APC button repeatedly to select the picture appearance setup option as shown below . APC (Auto Picture Control) APC (Auto Picture Control) - T o initialize values (reset to default settings), select the Normal option. 1. Press the MENU button and then use D / E button to select the PICTURE menu. 2. Press [...]

20 Plasma Monitor Operation - Y ou can adjust picture contrast, brightness, color, sharpness, and tint to the levels you prefer . 1. Press the MENU button and then use D / E button to select the PICTURE menu. 2. Press the G button and then use D / E button to select the desired picture option ( Contrast , Brightness , Color , Sharpness or Tint ) . [...]

Owner ’s Manual 21 Operation Off Sound Menu Options Sound Menu Options 1. Press the DASP button repeatedly to select the appropriate sound setup as shown below . DASP DASP (Digital (Digital Auto Sound Processing) Auto Sound Processing) 1. Press the MENU button and then use D / E button to select the SOUND menu. 2. Press the G button and then use [...]

22 Plasma Monitor Operation - T imer function operates only if current time has already been set. - Off-T imer function overrides On-Timer function if they are set to the same time. - If you do not press any button within 2 hours after the monitor turns on with the On T imer function, the monitor will automatically revert to standby mode. On/Of On/[...]

Owner ’s Manual 23 Operation Special Menu Options Special Menu Options Key Lock Key Lock - The monitor can be set up so that it can only be used with the remote control. - This feature can be used to prevent unauthorized viewing by disabling the front panel controls. - This Monitor is programmed to remember which option it was last set to even if[...]

24 Plasma Monitor Operation Special Menu Options continued Special Menu Options continued PIC- TURE SOUND TIMER SPECIAL SCREEN PIP/DW Prev. Menu T o start Language Key lock ISM Method Low power Set ID Demo G Index PICTURE SOUND TIMER SPECIAL SCREEN PIP/DW Prev. Menu On Off Language Key lock ISM Method Low power Set ID Demo Index G XD Demo XD Demo 1[...]

Owner ’s Manual 25 Operation Auto Auto Adjustment Adjustment - RGB (PC) mode only; This function doesn ’ t work for RGB-DTV . - Automatically adjusts picture position and minimizes image shaking. - After adjustment, if the image is still not correct, your Monitor is functioning properly but needs further adjustment. - The Auto config. , Positio[...]

26 Plasma Monitor Operation 1 4 ▲ ▼ ◀▶ 2-Split zoom ▲ ▼ ◀▶ 12 5 4 4-Split zoom ▲ ▼ ◀▶ 12 3 4 5 6 7 89 9-Split zoom Manual Configure (RGB-PC mode only) Manual Configure (RGB-PC mode only) - If the image still isn ’ t clear after auto adjustment is completed and especially if characters are still jittery , adjust the picture[...]

Owner ’s Manual 27 Operation 1. Press the MENU button and then use D / E button to select the SCREEN menu. 2. Press the G button and then use D / E button to select Reset . 3. Press the G button. • Y ou can initialize Manual config., Position, Split zoom, PIP size, PIP posi- tion, PIP transparency and sub picture size for DW . Initializing (Res[...]

28 Plasma Monitor Operation Screen Screen Adjustments (V Adjustments (V ideo1-2 and Component 480i mode only) ideo1-2 and Component 480i mode only) - Use this function to correct jittering or picture instability while viewing a video tape. 1. Press the MENU button and then use D / E button to select the SCREEN menu. 2. Press the G button and then u[...]

Owner ’s Manual 29 Operation W W atching PIP atching PIP - PIP lets you view 2 dif ferent inputs (sources) on your monitor screen at the same time. One source will be large, and the other source will show a smaller inset image. - This function doesn ’ t work for RGB-DTV(1080p). - If input signals(50Hz/60Hz) of the main and sub pictures are diff[...]

30 Plasma Monitor Operation Selecting a Source for the DW Selecting a Source for the DW W W atching DW atching DW Press the DW button repeatedly to select one of the DW options. Sub Picture Size Sub Picture Size Adjustment Adjustment Press the WIN.SIZE button. • Use the F / G button to change the sub picture size. • Using the WIN.SIZE function [...]

Owner ’s Manual 31 External Control Device Setup No. Pin Name 1 No Connection 2 RXD (Receive data) 3 TXD (Transmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 8 CTS (Clear to send) 9 No Connection 1 5 6 9 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DSR DTR CTS RTS PC 7-Wire Configuration (Standard RS-[...]

32 Plasma Monitor External Control Device Setup T ransmission * [Command 1]: k, j, m * [Command 2]: T o control PDP set. * [Set ID]: Y ou can adjust the set ID to choose desired moni- tor ID number in Special menu. Adjustment range is 1 ~ 99. When selecting Set ID ‘ 0 ’ , every con- nected PDP set is controlled. Set ID is indicated as decimal ([...]

Owner ’s Manual 33 External Control Device Setup 02. Input Select (Command 2:b) (Main Picture Input) G T o select input source for the Monitor . Y ou can also select an input source using the INPUT button on the Monitor's remote control. T ransmission Data 1 : Video1 2 : Video2 3 : Component1 4 : Component2 5 : RGB 6 : DVI 7 : Video3 8 : Vid[...]

34 Plasma Monitor External Control Device Setup 13. Remote Control Lock Mode (Command2:m) G T o lock the remote control and front panel controls on the monitor T ransmission [k][m][ ][Set ID][ ][Data][Cr] Acknowledgement Data 0: lock off 1: lock on • If you ’ re not using the remote control and front panel con- trols on the monitor , use this m[...]

Owner ’s Manual 35 External Control Device Setup 20. Color T emperature (Command2:u) G T o adjust color temperature. Y ou can also adjust ACC in the Picture menu. T ransmission Data 0: Cool 1: Normal 2: W arm [k][u][ ][Set ID][ ][Data][Cr] Acknowledgement [u][ ][Set ID][ ][OK][Data][x] 17. T reble (Command2:r) G T o adjust treble. Y ou can also a[...]

36 Plasma Monitor External Control Device Setup 23. ISM Method (Command2:p) G T o avoid having a fixed image remain on screen. T ransmission Data 0: Normal 1: White wash 2: Orbiter 3: Inversion [j][p][ ][Set ID][ ][Data][Cr] Acknowledgement [p][ ][Set ID][ ][OK][Data][x] 26. Auto Configure (Command2:u) G T o adjust picture position and minimize ima[...]

Owner ’s Manual 37 IR Code G Connect your wired remote control to the Remote Control port on the Monitor . G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz G Configuration of frame G Repeat code G Lead code • 1st frame Low custom code Lead code High custom code Data code Data code T C T f T1 C0 Carrier frequency F CAR =[...]

38 Plasma Monitor IR Code Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 SLEEP MUTE POWER VOL+ VOL- CH+ CH- APC DASP ENTER ( Á ) AII INPUT SELECT MENU ARC Split Zoom Window Position Window Size F G D E EXIT PIP XD PIP Input DW Video HDMI Key lock Index Auto config. [...]

Owner ’s Manual 39 Programming the Remote G The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. Programming a code into a remote mode Programming a code into a remote mode P[...]

40 Plasma Monitor Programming the Remote Programming Codes Programming Codes VCRs VCRs CA CA TV TV AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MA THES 031 033 041 DAEWOO 005 007 010 064 0 6 5 1 0 8 11 0 111 11 2 11 6 11 [...]

Owner ’s Manual 41 Programming the Remote Audio Audio APEX DIGIT AL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNA VOX 013 MARANTZ 024 MITSUBISHI 002 NAD 023 ONKYO 008 017 P ANASONIC 003 009 PHILIPS 013 PIONEER 004 026 PROCEED 021 PROSCAN 005 006 RCA 005 006 SAMSUNG 01 1 015 SONY 007 THOMPSON 005 006 TOSHIBA 019 0[...]

42 Plasma Monitor T roubleshooting Checklist No output from one of the speakers • Adjust Balance in the Sound menu. (Refer to p.21) Unusual sound from inside the monitor • A change in ambient humidity or temperature may result in an unusual noise when the plasma display is turned on or of f and does not indicate a fault with the monitor . No pi[...]

Owner ’s Manual 43 Specifications • The specifications shown above may change without notice for quality improvement. Product Specifications Product Specifications MODELS Width (inches / mm) Height (inches / mm) Depth (inches / mm) Weight (pounds / kg) Power requirement Resolution Viewing Size (mm) Operating T emperature Range Operating Humidit[...]

44 Plasma Monitor Notes Notes Notes[...]

Owner ’s Manual 45 Notes Notes Notes[...]

Y our LG Plasma Display Panel will be repaired or replaced in accordance with the terms of this w arranty , at LGE’s option, if it proves to be defective in material or workmanship under normal use, during the w arranty period (“W arranty Period”) listed below , effective from the date (“Date of Purchase”) of original consumer purchase of[...]

TO CONTACT THE LGE CUSTOMER SERVICE CENTER BY MAIL: LGE Customer Interactiv e Center P .O. Box 240007 201 James Record R oad Huntsville, Alabama 35824 http://www .lgservice.com FOR SERVICE: Before you call for warranty service, check your operating guide – you may avoid a service call. For w arranty service information, please contact the LGE Cus[...]

MW -71PY10 MW -71PY10G OWNER’S MANUAL PLASMA MONITOR PLASMA MONITOR Please read this manual carefully before oper- ating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back of the set and quote this information to your dealer when you require service. Model number : Serial[...]