LG Electronics 50PX4DRH-UA инструкция обслуживания

Please read this manual carefully and completely before operating your TV . Retain this manual for future reference. Record model number and serial number of the TV in the spaces provided below . See the label attached on the back cover and relate this information to your dealer if you require service. Model Number : Serial Number : MODELS: 50PY2DR[...]

2 Plasma TV Warning/Caution W ARNING/CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P AR TS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” w[...]

Owner ’s Manual 3 TV Guide On Screen Notices for U.S.A. TV Guide On Screen Notices for U.S.A. Digital Cable Compatibility Digital Cable Compatibility This digital television is capable of receiving basic analog, digital basic and digital premium cable television programming by direct connection to a cable system providing such programming. A secu[...]

4 Plasma TV Warning/Caution IMPORT ANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appa - ratus. This information shall be given[...]

Owner ’s Manual 5 Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way , such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen[...]

6 Plasma TV Contents After reading this manual, keep it handy for future reference. W arning/Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Digital Cable Compatibility . . . . . . . . . . . . . . . . . . . . . . . . .3 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4~5 Introduction Controls/Co[...]

Owner ’s Manual 7 Introduction Introduction Introduction What is a Plasma Display Panel (PDP)? A plasma display panel is the latest display technology and the best way to achieve flat panel displays with excellent image quality and large screen sizes that are easily viewable. The PDP can be thought of as a descendant of the neon lamp and it can b[...]

8 Plasma TV Introduction W W This is a front panel of 50PY2DR, 50PY2DRH, 60PY2DR, 60PY2DRH series TVs. - This is a simplified representation of a front panel. Here shown may be somewhat different from your TV . - This manual explains the features available on the 50PY2DR, 50PY2DRH, 60PY2DR, 60PY2DRH series TVs. Front Panel Controls Front Panel Cont[...]

RS-232C INPUT (CONTROL/SERVICE) AUDIO INPUT COMPONENT 2 R L DIGITAL AUDIO (OPTICAL) DVI INPUT COMPONENT2 INPUT OUTPUT AUDIO INPUT RGB INPUT VIDEO INPUT I E E E 1 3 9 4 HDMI 2 HDMI /DVI COMPONENT 1 MONITOR OUTPUT A/V INPUT1 VIDEO R L AUDIO (MONO) V I D E O S R E M O T E C O N T R O L CABLE ANTENNA AC INPUT DVD /DTV INPUT R S-VIDEO VIDEO L / MONO AUD[...]

10 Plasma TV Introduction TV GUIDE TV GUIDE MENU Button TV/VIDEO Button VOLUME ( F , G ) Buttons CHANNEL ( E , D ) Buttons INDEX Switches LED Display on or off. TV GUIDE Button Remote Control Sensor Power Standby Indicator Illuminates orange in standby mode. When the TV is turned on, the indicator will blink green for 3-4 seconds before the picture[...]

Owner ’s Manual 11 Introduction Connection Options Connection Options W W This is a back panel of 50PX4DR, 50PX4DRH series TVs. RS-232C INPUT (CONTROL/SERVICE) AUDIO R L DIGITAL AUDIO (OPTICAL) DVI INPUT COMPONENT2 INPUT OUTPUT AUDIO INPUT RGB INPUT VIDEO HDMI 2 HDMI1/DVI COMPONENT INPUT 1 R L (MONO) CABLE ANTENNA AC INPUT DVD /DTV INPUT IEEE-139[...]

12 Plasma TV Introduction - When using the remote control, aim it at the remote control sensor on the TV . MODE DA Y - D A Y + FLASHBK APM CC AUTO DEMO M/C EJECT TV INPUT TV/VIDEO LIGHT Illuminates the remote control buttons of selected mode. DA Y+/DA Y- Moves the Listings Grid forward or backward in 24 hour increments. NUMBER buttons /VCR/DVD cont[...]

Owner ’s Manual 13 Introduction MODE DA Y - D A Y + FLASHBK APM CC AUTO DEMO M/C EJECT TV INPUT TV/VIDEO TV INPUT • Rotates the input mode between Antenna and Cable. • Video, Front V ideo, Component 1-2, RGB- DTV (or RGB-PC), HDMI1/DVI, HDMI2 and IEEE1394 input sources, screen returns to the last TV . MUTE Switches the sound on or off. (Refer[...]

14 Plasma TV Installation Installation Installation Owner ’ s Manual 1.5V 1.5V Batteries Power Cord M O D E D A Y - D A Y + F L A S H B K A P M C C AUTO DEM O M / C E J E T V IN P U T 75 Ω Round Cable Ensure that the following accessories are included with your plasma display . If an accessory is missing, please contact the dealer where you pur[...]

Owner ’s Manual 15 Installation • Secure the TV assembly to the wall with strong strings or wire cables, (not supplied with the prod- uct), as shown. • If the set will be mounted on a desk top, install the 2 ring spac- er on the TV . And then install the TV brackets on the ring spacer as shown. Insert the 2 bolts and tighten securely , in the[...]

16 Plasma TV Installation Installation Instructions Installation Instructions GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker . Do not try to ground the unit by connecting it to telephone wires, lighteni[...]

Owner ’s Manual 17 Installation RS-232C INPUT (CONTROL/SERVICE) AUDIO INPUT COMPONENT 2 R L DIGITAL AUDIO (OPTICAL) DVI INPUT COMPONENT2 INPUT OUTPUT AUDIO INPUT RGB INPUT VIDEO INPUT I E E E 1 3 9 4 HDMI 2 HDMI /DVI COMPONENT 1 MONITOR OUTPUT A/V INPUT1 VIDEO R L AUDIO (MONO) V I D E O S R E M O T E C O N T R O L CABLE ANTENNA AC INPUT DVD /DTV [...]

18 Plasma TV Installation RS-232C INPUT (CONTROL/SERVICE) AUDIO INPUT COMPONENT 2 R L DIGITAL AUDIO (OPTICAL) DVI INPUT COMPONENT2 INPUT OUTPUT AUDIO INPUT RGB INPUT VIDEO INPUT I E E E 1 3 9 4 HDMI 2 HDMI /DVI COMPONENT 1 MONITOR OUTPUT A/V INPUT1 VIDEO R L AUDIO (MONO) V I D E O S R E M O T E C O N T R O L CABLE ANTENNA AC INPUT DVD /DTV INPUT Sw[...]

Owner ’s Manual 19 Installation Antenna or Cable Connection Antenna or Cable Connection - W all Antenna Socket or Outdoor Antenna without a Cable Box Connections - For optimum picture quality , adjust antenna direction if needed. 1. Analog and Digital TV signals provided on antenna 2. Analog and Digital TV signals provided on cable CABLE ANTENNA [...]

20 Plasma TV Installation - T o avoid picture noise (interference), leave an adequate distance between the VCR and TV - Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the[...]

Owner ’s Manual 21 Installation • Component Input ports T o get better picture quality , connect a DVD player to the compo- nent input ports as shown below . How to connect Connect the audio and video cables from the external equip- ment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipm[...]

22 Plasma TV Installation - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However , if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below . - This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Di[...]

Owner ’s Manual 23 Installation <When the PC supports DVI> How to connect 1. Connect the PC to HDMI1/DVI port of this TV with an HDMI-to-DVI cable(not supplied with this product). If you do not need to connect audio, HDMI2 port is also available for the DVI video connection. 2. If the PC(or the sound card of the PC) has a fiber optic digita[...]

24 Plasma TV Installation Resolution 720x400 640x480 800x600 Horizontal Frequency(KHz) 31.469 37.927 31.469 37.861 37.500 43.269 70.08 85.03 59.94 72.80 75.00 85.00 35.156 37.879 48.077 46.875 53.674 48.363 56.476 60.023 56.25 60.31 72.18 75.00 85.06 60.00 70.06 75.02 V ertical Frequency(Hz) Resolution Horizontal Frequency(KHz) V ertical Frequency([...]

Owner ’s Manual 25 Installation Send the TV ’ s audio to external audio equipment via the Digital Audio Output (Optical) port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. 2. Connect the other end of the optical cable to the digital audio (opti- cal) input on the audio equipment. 3. Set th[...]

26 Plasma TV Installation - HDMI TM , the HDMI logo and High-Definition Multimedia Interface is a trademark or registered trademark of HDMI Licensing." - This TV can receive the High-Definition Multimedia Interface(HDMI) or the Digital Visual Interface(DVI). - This TV supports HDCP(High-bandwidth Digital Contents Protection) Protocol for 720x4[...]

Owner ’s Manual 27 Installation Cable sample HDMI Cable (not supplied with the product) HDMI to DVI Cable (not supplied with the product) Fiber Optic Digital Audio Cable (not supplied with the product) Analog Audio Cable(RCA type) (not supplied with the product) Analog Audio Cable(Stereo to RCA type) (not supplied with the product) Reference Refe[...]

28 Plasma TV Installation How to use 1. Connect the HDMI1/DVI Source Devices(DVD Player or Set T op Box or PC) and the TV SET . 2. T urn on the display by pressing the POWER button on the TV SET and HDMI1/DVI Source Devices remote control. 3. Select HDMI1/DVI Input source in Main Input option on the SETUP menu.(Refer to P .41) 4. Check the image on[...]

Owner ’s Manual 29 Installation AUDIO R L VIDEO COMPONENT INPUT 1 R L (MONO) CABLE ANTENNA AC INPUT DVD /DTV INPUT COMPONENT INPUT 2 MONITOR OUTPUT A/V INPUT 1 VIDEO AUDIO TV SET TV VCR Cable IN (R) AUDIO (L) VIDEO 34 OUTPUT SWITCH S-VIDEO REMOTE CONTROL Cable Cable Box Rear Cable Box Front or Cable Service with a Cable Box Cable Service with a C[...]

30 Plasma TV Installation The TV Guide On Screen system's W elcome Screen appears: -- by pressing the TV Guide key -- when you power On your TV if you previously skipped "Set up TV Guide On Screen now" on the Reminder Screen. The Welcome Screen highlights features of the TV Guide On Screen system. Press ENTER to begin Setup. How to u[...]

Owner ’s Manual 31 Installation 2. Screen 2: Enter ZIP or Postal Code Option 1 • If you selected USA in Screen 1, you see the ZIP Code screen. • Y ou input numbers by either pressing the number keys on the remote or using the D / E button to display a number, and then the F / G but- ton to move to another field. • Press ENTER to display Scr[...]

32 Plasma TV Installation 6. Screen 6: Cable Box T uning Channel • Select the channel used for the cable box. • Press ENTER to display Screen 7. 7. Screen 7: Cable Box Configuration Diagram • The diagram shows the correct way to install the G-LINK Cable from the back of the device to the cable box. Make sure the G-LINK TM Cable is properly in[...]

Owner ’s Manual 33 Installation 8. Screen 8: Cable Box Brand Name • Use the D / E button to select a cable box brand. • Press ENTER to display Screen 9. 9. Screen 9: Cable Box Preparation • Follow the on-screen instructions, and press ENTER to display Screen 10. 10. Screen 10: Cable Box Code T esting • When testing is done, Screen 1 1 dis[...]

34 Plasma TV Installation 14. Screen 14: Congratulations • Press ENTER to display Screen 15. 13. Screen 13: Are your basic settings correct? • If you select Y es, you see Screen 14. • If you select No, you see Screen 1. 12. Screen 12: Do you have an antenna connected? • If you select Y es, you see Screen 13. Note: •If you selected No in S[...]

Owner ’s Manual 35 Installation 15. Screen 15: Helpful Information • This screen tells you valuable information on using your Guide. • Press ENTER to watch TV . Notes: • The TV Guide On Screen system receives program listings data through your cable or over-the-air video signal. In order to receive regular program listings, please remember [...]

36 Plasma TV Operation 1. First, connect power cord correctly . At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the , TV/VIDEO , CH ( D / E ) button on the TV or press the POWER , TV/VIDEO , TV INPUT , CH ( D / E ) , Number (0 ~ 9) button on the remote control. Notes: • If you intend to be away on vacation, d[...]

Owner ’s Manual 37 Operation HOME Menu HOME Menu - This menu is a contents guide. In HOME Menu, you enter the recorded list of DVR, photo list and music list of DVR or Memory Card, TV Guide,Schedule of the TV Guide, IEEE1394 or TV Menu. Recorded TV Photo List Music List TV Guide TV Menu IEEE 1394 Schedule[...]

38 Plasma TV - The menus can be shown on the screen in the selected language. First select your language. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Language . 3. Press the G button and then use D / E button to select your desired language. From this point [...]

Owner ’s Manual 39 Operation - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. - Run EZ Scan again after any Antenna/Cable connection changes. - A password is required to gain access to EZ Scan menu if the Lock System is turned on. 1. Press the MENU button and then use D /[...]

40 Plasma TV Setup Menu Options Setup Menu Options Note: • When a cable box connects to the physical channel 2, 3, or 4 in TV Guide On Screen Setup, cable channels(CA TV or CADTV) will not be editable by Channel Edit. Instead, use the cable box's Channel Edit if available. - Create two different types of channel lists in memory: “ Custom l[...]

Owner ’s Manual 41 Operation - Changes the picture source so you can watch your off-air TV , cable TV , VCR, DVD, or any other devices that are connected to your TV . 1. Press the MENU button and then use D / E button to select the SETUP menu. 2. Press the G button and then use D / E button to select Main Input . 3. Press the G button and then us[...]

42 Plasma TV - Use to quickly reset all the Video menu options to their original factory preset values. 1. Press the MENU button and then use D / E button to select the VIDEO menu. 2. Press the G button and then use D / E button to select Video Reset . 3. Press the G button to reset the V ideo menu options to original values. 4. Press EXIT button t[...]

Owner ’s Manual 43 Operation - Other languages may be available if a digital signal is provided by the broad- casting station. 1. Press the EZ SOUND button repeatedly to select the appropriate sound setup as shown below: Custom (your own settings), Normal , Stadium , News , Music , and Theater . • Y ou can also adjust EZ Sound in the AUDIO menu[...]

44 Plasma TV Audio Menu Options Audio Menu Options Operation 1. Press the MENU button and then use D / E button to select the AUDIO menu. 2. Press the G button and then use D / E button to select Front Surround . 3. Press the G button and then use D / E button to select Off , 3D EchoSound System or SRS (Sound Retrieval System) TruSurround XT . • [...]

Owner ’s Manual 45 Operation 1. Use the SAP button to select your desired MTS mode in analog signal. Each time you press the SAP button, Mono , Stereo , or SAP appear in turn. • If other languages available on the digital signal, select them with the SAP button. 2. Press EXIT button to save and return to TV viewing. Stereo/SAP Stereo/SAP Broadc[...]

46 Plasma TV Operation - T imer function operates only if current time has been set. - Off-T imer function overrides On-Timer function if they are set both set to the same time. - The TV must be in standby mode for the On-T imer to work. - If you do not press any button within 2 hours after the TV turns on with the On T imer function, the TV will a[...]

Owner ’s Manual 47 Operation Auto Of Auto Of f f - If set to on and there is no input signal, the TV turns off automatically after 10 minutes. 1. Press the MENU button and then use D / E button to select the TIME menu. 2. Press the G button and then use D / E button to select Auto Off . 3. Press the G button and then use D / E button to select On[...]

48 Plasma TV Operation Cinema 3:2 Mode Setup - Set up the TV for the best picture appearance for viewing movies . 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Advanced . 3. Press the G button and then use D / E button to select Cinema 3:2 Mode . 4. Press the [...]

Owner ’s Manual 49 Operation LG Logo LG Logo - This function is only applied to 60PY2DR/60PY2DRH model. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Advanced . 3. Press the G button and then use D / E button to select LG Logo . 4. Press the G button and the[...]

50 Plasma TV Option Menu Features Option Menu Features Operation Aspect Ratio Control Aspect Ratio Control - Lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio picture format. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV , you need to specify how the picture is t[...]

Owner ’s Manual 51 Operation Caption/T Caption/T ext ext Analog Broadcasting System Captions - Select a caption mode for displaying captioning information if provided on a program. - Analog caption displays information at any position on the screen usually the program's dialog. - T ext displays information, usually at the bottom position and[...]

52 Plasma TV Option Menu Features Option Menu Features Operation Caption Option Caption Option - Customize the DTV/CADTV captions that appear on your screen. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Caption Option . 3. Press the G button and then use F / [...]

Owner ’s Manual 53 Operation - A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image ; even though the image is changed. Use our unique method to minimize any fixed image on the screen. 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G butt[...]

54 Plasma TV Operation Auto Demo Auto Demo - Displays the slide show to explain the main features of this TV . 1. Press the MENU button and then use D / E button to select the OPTION menu. 2. Press the G button and then use D / E button to select Auto Demo . 3. Press EXIT button to stop Auto Demo. Note : The images on the Auto Demo may differ from [...]

Owner ’s Manual 55 Operation Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V -Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the t[...]

56 Plasma TV Operation Parental Lock Setup Parental Lock Setup 1. Press the MENU button and then use D / E button to select the LOCK menu. Th en, press the G button • Enter the password as requested. • The TV is set up with the initial password “ 0-0-0-0 ” . 2. Use the D / E button to choose from the following Lock Menu options. Once the op[...]

Owner ’s Manual 57 Operation Cable menu options Cable menu options - The Cable sub menu displays when inserting the CableCARD TM to the TV . - The CableCARD TM type is Motorola, Scientific Atlanta (SA), or SCM etc. The OSD (On screen display) is different from your TV according to your CableCARD TM type. Scrambled channel Scrambled channel - Inse[...]

58 Plasma TV Operation CableCARD CableCARD ™ ™ Function Function - If an emergency situation occurs during watching the TV/DTV/CA TV/CADTV , you can receive a message from cable TV service provider(s). - When receiving an emergency message, the message is displayed on the screen as shown below or the channel is changed automatically to a channe[...]

Owner ’s Manual 59 Operation 1. Select the Recorded TV in HOME menu or press the REC LIST button to view the recording list as shown below. A. B. - When you press the button, HOME menu is displayed. From here, you can view the recorded program list. - Or pressing the REC LIST button, you can directly enter the recording list. 3. Select a desired [...]

60 Plasma TV Operation Recorded TV Recorded TV - The thumbnail recorded list is shown above. 1. Use the CH D / E button for page up/down navigation. 2. Use the MARK button to add or delete from the mark list. A is displayed next to the thumbnail photo if an item is marked. 3. Use D / E / F / G button to navigate the appropriate thumbnail photo, the[...]

Owner ’s Manual 61 (If you do not select a section to repeat) - If you wish to return to a initial portion of the playback program, press the button. Operation On playing the recorded program, play On playing the recorded program, play - Y ou can play the selected program in the recorded program list. 1.Play a recorded program. 2.While playing, Y[...]

62 Plasma TV Operation Recorded TV Recorded TV On playing the recorded program, edit a section On playing the recorded program, edit a section - Y ou can save the desired screen in the recorded program list after editing the recorded program. 1. At the point you wish to start , press the button. • The progress bar will show the edited section as [...]

Owner ’s Manual 63 v On playing the recorded program, repeat a section On playing the recorded program, repeat a section - Y ou can set the section and repeat the same section of the the recorded program. 1. At the point you wish to start, press the button. • At start points, it will appear as marking . 2. At the point of desired finish, press [...]

64 Plasma TV Operation What is Memory Card What is Memory Card Precaution for Using the Memory Card Precaution for Using the Memory Card Notes on Memory Card Notes on Memory Card This is a device equipment to communicate the data between A V external equipment. It ’ s used to a digital cam- era, camcorder , MP3 player , notebook or PDA. - Please [...]

Owner ’s Manual 65 Operation W W Inserting a Card 1. Insert the Memory Card to Memory card slots of the TV side panel. 2. T wo slots support defferent types of the Memory Cards. 3. If Memory Card is not inserted, each slot is disabled. W W Ejecting a card 1. Press the M/C EJECT button on the remote control. 2. Select the Memory Card 1 or Memory C[...]

66 Plasma TV Operation Notes on Memory Card Notes on Memory Card Slot 1 MMC SD SMC Slot 2 MultiMediaCard TM Secure Digtal TM SmartMed í a xD-Picture Card M EMORY S TICK CompactFlash Microdrive magicstor xD MS CF MD MagicStor Memory Card type Memory Card type - Use the specified card based on the slot location. - 9 types of Memory Card can be used [...]

Owner ’s Manual 67 Operation 1. In HOME menu, use D / E button and then use the ENTER or G button to select the Photo List . 2. Use D / E button to select the HDD / Memory Card 1 / Memory Card 2 and then you will see a screen filled with thumbnail photos (pic.C,D). A. A. 2. Enter the HOME Menu Enter the HOME Menu - When you press the button, HOME[...]

68 Plasma TV Photo List Photo List Operation C. C. 3. Select the desired folder in the folder list and then press the ENTER button to view the detailed menu. • Create : Create new folder. • Delete : Delete folder (except ‘ My Photo' ) • Rename : Edit folder name. • Cancel : Close the detailed menu. D. D. -> Use the D / E / F / G b[...]

Owner ’s Manual 69 Operation - As shown, up to 15 thumbnail photos are listed per page. 1. Use the CH D / E button to navigate in the thumbnail photo page. 2. Use MARK button to mark or unmark a photo. When one or more photos are marked, you can view or slide show only the marked ones. If no photo is marked, you can view or slide show all photos [...]

70 Plasma TV Operation 1. Use D / E button and then use the ENTER button or G button to select the Music List . 2. Use D / E button to select the HDD / Memory Card 1 / Memory Card 2 and then you will see a list of music titles (pic.C,D). A. A. - Purchased MP3/music files may contain copyright restrictions. Playback of these files may not be support[...]

Owner ’s Manual 71 Operation C. C. 3. Select the desired folder in the folder list and then press the ENTER button to view the detailed menu. • Create : Create new folder. • Delete : Delete folder (except ‘My Music’). • Rename : Edit folder name. • Cancel : Close the detailed menu. D. D. -> Use the D / E / F / G buttons and then EN[...]

72 Plasma TV Operation • Play: Play the selected musics. • Stop Play: Stop playback. • Play With Photo: Start playing the selected musics and then move to the Photo List. • Mark All: Mark all musics in the folder . • Unmark All: Unmark all marked musics. • Move: Move the selected musics of this folder to another folder . • Delete: Del[...]

Owner ’s Manual 73 Operation - This function allows the unit to automatically record live TV and make it available for reviewing at any time. With Auto Buffering turned on, you may pause and rewind normal TV viewing at any time without missing any of the live broadcast. 1. Press the MENU button and then use D / E button to select the OPTION menu.[...]

74 Plasma TV Operation - If you wish to return to a initial portion of T imeshift, press the button. - On progressing T imeshift, It can do a diversified playing. Notes: • DVR (Digital Video Recorder) : A device which records and plays broadcast program contents onto a hard disk • in TV or SET TOP BOX. • If available hard-disk space is low wh[...]

Owner ’s Manual 75 Operation - This function is able to record channel watched on main screen of an Analog or Digital broadcast. - This function records the currently displayed channel. 1. Select the desired channel to record while watching program and then press the RECORD ( Ó ) button. 2. Use the F / G button to select the OK , Options or Stop[...]

76 Plasma TV Operation Recording Recording 6. After adjusting the recording time, select OK and the progress bar will be displayed. T otal recording duration Elapsed recording time • Press the EXIT button to hide the Progress Bar . Press the ENTER button to display the progress bar . 7. Press the STOP ( V ) to stop recording, or , when the record[...]

Owner ’s Manual 77 Operation Record - While recording, you can change channels or inputs, without disturbing the recording. And the screen being recorded will be shown in the lower-right corner of the main screen. 1. After starting an Instant Record or Reserved Record, change the channel or input. •Y ou can check the screen being recorded in th[...]

78 Plasma TV Operation Overview - Y our new TV contains the TV Guide On Screen Interactive Program Guide. - The TV Guide On Screen system has features that help you get the most out of your viewing experience. TV Guide On Screen system Overview The TV Guide On Screen system has the following features: •Eight days of show listings (today plus seve[...]

Owner ’s Manual 79 Operation Screen Components - The screens displayed in the TV Guide On Screen system share many of the same compo- nents, as shown in the following figure: • Video Window - displays TV video while the TV Guide On Screen system is displayed •Service Bar - provides access to the 4 main Guide Services •Current Service Label [...]

80 Plasma TV Operation •A Panel Menu appears when the Menu key is pressed on a highlighted tile and additional options are available. It also appears when you press ENTER on a show starting in the future. •When a Panel Menu appears, the highlighted tile changes color to indicate the Panel Menu relates to this tile. •The Panel Menu displays be[...]

Owner ’s Manual 81 Operation - Access Listings by pressing the TV Guide button on your remote or on the front panel of your TV . - Listings is always the first Service displayed in the Guide. - With Listings highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen. •View 8 days of show listing[...]

82 Plasma TV Operation - Search lets you find shows by category (Alphabetical, Movies, Sports, Children, Educational, News, V ariety , Series, HDTV) or b y Keyword. - With Search highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen. •Category Search Example: Movies 1. From Search, use the E [...]

Owner ’s Manual 83 Operation 2. Use the E button to highlight a subcategory (for example, All). 3. Press ENTER to display a list of all Movies, organized by date and time. Y ou can choose to set a recording, a reminder , or tune to the channel. 4. Highlight a show and press ENTER to watch (if on now) or the Menu key to display the Episode Options[...]

84 Plasma TV Operation - Keyword search lets you enter a word(s) to look for a particular show by category or for every show title that matches. • Keyword Search 1. Highlight the Keyword navigation label, and press ENTER button to display the Keyword Search menu. 2. Highlight New Search, and press ENTER button. 3. The Search Options menu is displ[...]

Owner ’s Manual 85 Operation The TV guide on screen system stores all the keywords you create. T o edit or delete a keyword, highlight the keyword and press the Menu key . A Search Options menu is displayed. Go to Service Bar - closes the menu, changes no infor- mation, and returns to the Search Service Bar . Edit Search - displays the keyboard, [...]

86 Plasma TV Operation Recordings displays a list of previously recorded or currently recording shows on a DVR. With Recordings highlighted, press the INFO button to display a Help screen. Press the INFO button again to close the screen. Choose the way Recordings are displayed by highlighting Recordings on the Service Bar and then press the MENU bu[...]

Owner ’s Manual 87 Operation T o view an episode, you can do one of the following: • Highlight an episode, and press ENTER to view it now . W Go to Service Bar - close the menu, changes no infor- mation, and returns to the Schedule Service Bar . W Delete Episode - deletes the episode from the Recordings, A Confirm menu is displayed. W Y es - de[...]

88 Plasma TV Operation - Schedule lets you review , edit, or delete Record and Remind events that you set previously . - With Schedule highlighted, press the Info button to display a Help screen. Press the Info button again to close the screen. - An icon identifies the event type: Record W Once —records the show one time W Regularly —records th[...]

Owner ’s Manual 89 Operation - After you initially complete Guide Setup, you can make changes to Guide settings in the following areas: • Change System Settings • Change Channel Display • Change Default Options Highlight a choice, press ENTER , and follow the on-screen instructions. • Change System Settings This option appears after you h[...]

90 Plasma TV Operation Press ENTER to display the Channel Editor screen. Then, highlight a channel and press Menu. A Grid Options menu is displayed. Highlight Go Back to Setup to close the menu, change no information, and return to the Setup Service Bar . Or make changes and when finished, press ENTER to high- light Done. Press ENTER again to close[...]

Owner ’s Manual 91 Operation General Default Options lets you set defaults for the following: •The initial Info Box size when the TV guide on screen system is entered. Choices are No, Small, Large, and Last Used (Default = Last Used). •The Info Box size rotation when the Info key is pressed while in the TV guide on screen system. Choices are [...]

92 Plasma TV Operation < Record Defaults> • Record Default Options lets you set defaults for the following: • When to start the record event. Choices are 120 minutes early to 120 minutes late, to On time. (Default = On time) • When to end the record event. Choices are 120 minutes early to 120 minutes late, to On time. (Default = On time[...]

Owner ’s Manual 93 Operation W Once —records the show one time W Regularly —records the show every time the show airs on the same channel and starts at the same time W Weekly —records the show each time the show airs on the same day of the week, on the same channel and starts at the same time W Off (not cancel) —keeps the show in the list[...]

94 Plasma TV Operation When finished, press ENTER to highlight Schedule Recording. Press ENTER again to close the menu. Y ou see a Record icon for the selected frequency next to the show title. Highlight Cancel to close the menu, change no information, and return to the highlighted show . 3) Manual Recording •Highlight the Schedule Service label,[...]

Owner ’s Manual 95 Operation • Use the left and right arrows to choose between Once, Daily , Weekly , and Off, as follows. W Once —records the time, channel, input, recorder combination one time. W Daily —records the time, channel, input, recorder combination Monday through Friday . W Weekly —records the time, channel, input, recorder com[...]

96 Plasma TV Operation Y ou can set a show Reminder in Listings, Search, and Schedule or change Reminder settings for a show in Schedule. There are 2 ways to set a show Reminder: 1) From a Panel Menu • Highlight a show , and press Menu to display the Episode Options menu. • Highlight Set Reminder , and press ENTER to display the Remind Options [...]

Owner ’s Manual 97 Operation 2) Manual Reminder •Highlight the Schedule Service label, and press the Menu key to display the Schedule Options menu. •Use the D / E / F / G buttons to move through the options. Use the number or D / E / F / G buttons to change the information, as necessary . •Highlight New Manual Reminder and press the ENTER k[...]

98 Plasma TV Operation Based on your option settings, a notification screen will appear , if your TV is On at the reminder time. Y ou can then choose to hide the reminder , or highlight the show , and press ENTER to tune to the show . If there is no activ- ity for 3 minutes, the notification screen automatically closes and completes the highlighted[...]

Owner ’s Manual 99 Operation - It's available to communicate to either direction and you can give and take a image, sound, or each control command with one cable. W How to connect the 1394 • T o operate the IEEE1394, these methods are available as shown below . 1. When connecting the DVHS or the MicroMV Camcorder , as shown in the figure ([...]

100 Plasma TV Operation IEEE 1394 Functions IEEE 1394 Functions 2. When connecting the DVHS and the MicroMV Camcorder , as shown in the figure (c) or (d), press the button to move the IEEE 1394 in HOME menu to show the control panel and then select the DVHS or the MicroMV Camcorder . (c) TV DVHS + MicroMV Camcorder <Connect the IEEE1394 Cable>[...]

Owner ’s Manual 101 Operation DVHS DVHS W How to play the DVHS <TV> <DVHS> 1. Connect the IEEE 1394 jack at the TV to the IEEE 1394 jack at the DVHS with IEEE 1394 Cable. 2 . When watching the TV , press the button to move the IEEE 1394 in HOME menu and then ENTER button. 3 . Press the D / E buttons to select the DVHS and then use the[...]

102 Plasma TV IEEE 1394 Functions IEEE 1394 Functions Operation * Supported DVHS List JVC(HM-DH40000K) JVC(HM-DH40000U) JVC(HM-DH5U) MITSUBISHI(HV -HD1000) P ANASONIC(NV-DH2) • The control panel of DVHS -Depending on the connected equipment, marked control panel may be different. 3 4 5 7 6 8 9 1. DVHS Model 2. Connected Equipment to the 1394 3. D[...]

Owner ’s Manual 103 Operation W How to play the instant reecord to the DVHS 2 . Press the D / E buttons to select the DVHS and then use the ENTER button. • Show the control panel of DVHS. • Show the control panel of DVHS. The instant record function can not be used with copy-protected programs. 1 . When watching the TV , press the button to m[...]

104 Plasma TV Operation IEEE 1394 Functions IEEE 1394 Functions W How to save the DVHS to the DVR 1. On playing the DVHS, press the D / E / F / G buttons to move to DVR  and then press the ENTER button. • Save the current screen to the DVR. 2. Press the D / E / F / G buttons to move to DVR  and then use the ENTER button to end a saving. Whe[...]

Owner ’s Manual 105 Operation W W V How to save the DVR to the DVHS 1. When press the button, record list is displayed. Y ou can select the wanted program by pressing the D / E / F / G buttons. And then press the ENTER button. The copy-protected contents couldn’t save to the DVHS. 2. Select the DVHS Out by pressing the D / E buttons and then pr[...]

106 Plasma TV Operation IEEE 1394 Functions IEEE 1394 Functions W W V How to play the MicroMV Camcorder MicroMV Camcorder MicroMV Camcorder <TV> <MicroMV Camcorder> 1. Connect the IEEE 1394 jack at the TV to the IEEE 1394 jack at the MicroMV Camcorder with IEEE 1394 Cable. 2 . When watching the TV , press the button to move the IEEE 139[...]

Owner ’s Manual 107 Operation • The control panel of MicroMV Camcorder -Depending on the connected equipment, marked control panel may be different. 1. MicroMV Camcorder Model 2. Connected Equipment to the 1394 3. MicroMV Camcorder Company 4. MicroMV Camcorder Operating Status 5. MicroMV Camcorder Play T ime 6. T ape Status • T ape shape Icon[...]

108 Plasma TV Operation W W V How to save the MicroMV Camcorder to the DVR 1. On playing the MicroMV Camcorder , press the D / E / F / G buttons to move to DVR  and then use the ENTER button. • Save the current screen to the DVR. 2. Press the F / G buttons to move to DVR  and then use the ENTER button to end a saving. Notes: • In memory m[...]

Owner ’s Manual 109 Operation DTV Link DTV Link : DTV Link applies to 1394 connection of device labeled with DTV Link logo. W W V How to play the DTV Link <TV -Consumer> <DTV Link- Producer> 1. Connect the IEEE 1394 jack of the TV to the IEEE 1394 jack of the DTV Link supported device IEEE 1394 Cable. 3. On playing the DTV Link, press[...]

110 Plasma TV Operation W W V Don’t connect ! • When connecting with these 2 methods, the IEEE1394 will not work properly . (a) LOOP Connection <Connect the IEEE1394 Cable> <TV> <DVHS> <MicroMV Camcorder> <Connect the IEEE1394 Cable> <Connect the IEEE1394 Cable> (b) When connecting the 4 devices and over , th[...]

Owner ’s Manual 111 Operation - PIP lets you view 2 dif ferent inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. - T win Picture mode splits the screen into two images, allowing two picture sources to be shown on the TV screen at the same time. Each source is given[...]

112 Plasma TV Operation In PIP mode, press the D / E / F / G button to move the sub picture to a different location on the screen. Use the D / E / F / G button to change main and sub picture sizes in T win Picture mode. If screen is adjusted to the maximal size, the large screen is filled with entire screen vertically as shown. i.e) 1. Press the PI[...]

Owner ’s Manual 113 Operation APM (Adaptive Picture Mode) - Allows a viewer to select their preferred picture mode after compairing the four different picture ( Daylight , Normal , Night Time and Custom ) settings. 1. Press the APM button at once. As shown below , the screen is divided to 4-split. Use the D / E / F / G button to navigate 4 EZ Pic[...]

114 Plasma TV Operation 4 : 3 16 : 9 Screen Ratio of Input Signal 4:3 Screen Ratio of Input Signal 16:9 Resolution of Input Signal 720x480i Resolution of Input Signal 720x480p Resolution of Input Signal 1280x720p Resolution of Input Signal 1920x1080i Multilingual : Input Signal have over two Audio infor- mation. Press the SAP button to select wante[...]

Owner ’s Manual 115 Operation - Nothing to do with Caption on/Off using MUTE button, the mode selected Caption/T ext is to be displayed. - When you repeatedly press the MUTE button, the sound mode is changed in turn. (Refer to the picture below) Note: • EZ Mute only operates in DTV/Analog/Video/Front V ideo/IEEE1394. EZ Mute Mute : Sound is mut[...]

116 Plasma TV Operation • When RGB connect to PC output and select the RGB-PC in Main Input, this function is used. • When HDMI/DVI connect to PC output and select HDMI/DVI input, this function is used. • In RGB-DTV mode, SIZE and PHASE is not available. •After connecting RGB-PC or HDMI/DVI to PC output and checking the screen quality . - D[...]

Owner ’s Manual 117 External Control Device Setup No. Pin Name 1 No connection 2 RXD (Receive data) 3 TXD (T ransmit data) 4 DTR (DTE side ready) 5 GND 6 DSR (DCE side ready) 7 RTS (Ready to send) 8 CTS (Clear to send) 9 No Connection 1 5 6 9 2 3 5 4 6 7 8 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DSR DTR CTS RTS PC 7-Wire Configurations (Standard [...]

118 Plasma TV External Control Device Setup • Baud rate : 9600 bps (UART) • Data length : 8 bits • Parity : None * Use a crossed (reverse) cable. • Stop bit : 1 bit • Communication code : ASCII code Communication Parameters Communication Parameters T ransmission * [Command 1]: First command to control the set. (j,k,m or x) * [Command 2]: [...]

Owner ’s Manual 119 External Control Device Setup 02. Input Select (Command2:b) (Main Picture Input) G T o select input source for the TV . T ransmission Data 0: DTV 1: Analog 2: Video 3: Front Video 4: Component 1 5: Component 2 6: RGB-DTV 7: RGB-PC 8: HDMI1/DVI 9: HDMI2 Date 1: 4:3 2: 16:9 3: Horizon 4: Zoom 1 5: Zoom 2 6: Set by program 10: Ci[...]

120 Plasma TV External Control Device Setup 09. Color (Command2:i) G T o adjust the screen color. Y ou can also adjust color in the Video menu. T ransmission Data Min : 0 ~ Max : 64 • Refer to ‘ Real data mapping ’ . See page 1 19. [k][i][ ][Set ID][ ][Data][Cr] Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 10. Tint (Command2:j) G T o adj[...]

Owner ’s Manual 121 External Control Device Setup 19. Color T emperature (Command2:u) G T o adjust color temperature. Y ou can also adjust color temperature in the Video menu. T ransmission Data 0: Medium 1: Cool 2: Warm [k][u][ ][Set ID][ ][Data][Cr] Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 23. Orbiter Time Setting (Command2:r) G T o ad[...]

122 Plasma TV External Control Device Setup 26. Channel Add/Del (Command: m b) G T o add and delete the channels T ransmission Data 0: Channel Delete 1: Channel Add [m][b][ ][Set ID][ ][Data][Cr] [b][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement 27. Key (Command: m c) G T o send IR remote key code T ransmission Data Key code: Refer to page 124. [m][...]

Owner ’s Manual 123 IR Codes G Connect your wired remote control to the Remote Control port on the TV . G Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz G Configuration of frame G Repeat code G Lead code • 1st frame Low custom code Lead code High custom code Data code Data code T C T f T1 C0 Carrier frequency F CAR = 1/[...]

124 Plasma TV IR Codes 0F 0B 08 79 0E 10 ~ 19 4C 1A 09 02 03 00 01 1E AA 39 40 41 07 06 44 43 52 4D 5B 60 72 71 61 63 0A CB D6 5A D0 BF D4 D5 D7 C6 CC 76 77 AF 70 C4 C5 B0 BA B1 BD 8F 8E B2 B3 A9 92 CA 80 7C 7D 90 R/C Button R/C Button R/C Button (Power On/Off) R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button R/C Button [...]

Owner ’s Manual 125 Programming Codes G The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode Programming a code into a remote mode Programming the Remote Prog[...]

126 Plasma TV Programming the Remote Programming Codes Programming Codes VCRs VCRs CA CA TV TV AIWA 034 AKAI 016 043 046 124 125 146 AMPRO 072 ANAM 031 033 103 AUDIO DYNAMICS 012 023 039 043 BROKSONIC 035 037 129 CANON 028 031 033 CAPEHART 108 CRAIG 003 040 135 CURTIS MA THES 031 033 041 DAEWOO 005 007 010 064 065 108 1 10 1 1 1 11 2 11 6 11 7 11 9[...]

Owner ’s Manual 127 Programming Codes Audio Audio APEX DIGIT AL 022 DENON 020 014 GE 005 006 HARMAN KARDON 027 JVC 012 LG 001 010 016 025 MAGNA VOX 013 MARANTZ 024 MITSUBISHI 002 NAD 023 ONKYO 008 017 P ANASONIC 003 009 PHILIPS 013 PIONEER 004 026 PROCEED 021 PROSCAN 005 006 RCA 005 006 SAMSUNG 01 1 015 SONY 007 THOMPSON 005 006 TOSHIBA 019 008 Y[...]

128 Plasma TV T roubleshooting Checklist No output from one of the speakers • Adjust Balance in the AUDIO menu. (Refer to p.44) Unusual sound from inside the TV • A change in ambient humidity or temperature may result in an unusual noise when the plasma display is turned on or of f and does not indicate a fault with the TV . No picture & No[...]

Owner ’s Manual 129 Maintenance 1. Here ’ s a great way to keep the dust of f your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it ’ s almost dry , and then use it to wipe the screen. 2. Make sure the excess water is off the screen, and then l[...]

130 Plasma TV Specification • The specifications shown above may be changed without prior notice for quality improvement. Product Specifications Product Specifications MODELS AC100-240V ~ 50/60Hz NTSC-M, A TSC, 64 & 256 QAM VHF 2 ~ 13, UHF 14 ~ 69, CA TV 1 ~ 135, DTV 2 ~ 69, CADTV 1 ~ 135 75 Ω 32 ~ 104 ° F (0 ~ 40 ° C) Less than 80% 55.9 [...]

Y our LG Plasma TV will be repaired or replaced in accordance with the terms of this warranty , at LGE’s option, if it proves to be defective in material or workmanship under normal use, during the w arranty period (“W arranty P eriod”) listed below , effective from the date (“Date of Purchase”) of original consumer purchase of the produc[...]

i TO CONTACT THE LGE CUSTOMER SERVICE CENTER BY MAIL: LGE Customer Interactiv e Center P .O. Bo x 240007 201 James Record R oad Huntsville, Alabama 35824 http://www .lgservice.com FOR SERVICE: Before you call for warranty service, check your operating guide – you may avoid a service call. For w arranty service information, please contact the LGE [...]