Leviton Internet Gateway инструкция обслуживания

10/100Mbps 4-P or t Inter net Gatew a y DESCRIPTION Leviton’s 1 0/1 00Mbps 4-Port Internet Gateway allows multiple users to utilize a single, secure, high-speed broadband (DSL and cable) Internet connection and creates a private network for home, small office or school environments. Chapters 1: Introduction 2: Hardw are Installation 3: Configurat[...]

Environmental Specifications Dimensions: 2.5˝H x 6.5W˝ x 3.27˝D Po we r: 12VDC@1000mA Emissions: FCC ClassB Operating T emperature: 0°C to 50°C (32°F to 122°F) Storage T emperature: -40°C to 70°C (-40°F to 158°F) Operating Humidity: 20% to 95% relative humidity , non-condensing Storage Humidity: 20% to 95% relative humidity , non-condens[...]

4. In the Configuration window , select the TCP/IP protocol line that has been associated with your network card or adapter . (Figure 33) 5. Click Proper ties button, then choose IP Address tab. Select Obtain an IP address automatically . Press OK. Y ou have completed the client settings. (Figure 34) NOTE: Windows may ask you for original Windows i[...]

3. Click the “ Apply” button. W AN MA C Clone (F igure 31) Enter the MAC Address if your ISP allows access of one specific PC’ s Ethernet MAC address. Click Restore MAC Address to return to the default setting. DDNS Setting Setting the Dynamic DNS allows others to access your FTP or Web service on your computer using DNS- like address. DDNS S[...]

THE SETUP WIZARD The Gatew ay's Setup Wizard will guide you step by step to configure network. Please follow the instructions as the wizard's pages request and change the settings in accordance to the infor mation provided b y your ISP . If you use a DSL modem for broadband access, please go to the sectioned titled "PPPoE Connection [...]

Name: Enter the desired name in the column. Status: Choose Enabled to enable it or Disabled to ignore. IP Address: Set IP addresses to be detected by users. W AN Address: If more than one Alias Address is set in section 3.2.5 the Alias IP Setup, you can get multiple W AN IP addresses to choose. The following screen will appear with a pull-down colu[...]

PPTP For W AN (F igure 9) 1. Choose “YES” and "PPTP" when prompted with this screen: 2. Click “Next”. On the next screen, enter the infor mation for PPTP Account, PPTP Password, and Host Name. Using the information provided by your ISP , enter the information for “My IP Address” and ”My Subnet Mask”. (Figure 10) Dynamic IP[...]

F irew all Setting (F igure 27) NA T allows all of the computers on your network to use one IP address. Hacker Attack Protect k eeps your network awa y from hacker attacking. Block Hacker Scan is used to hide the Gate way so that the hack ers won’t find it on the network. Remote Management makes you able to manage the Gate way from Internet. DMZ [...]

Backup (Figure 24) Y ou can save and restore the current configuration file to your computer . Setup the Advanced Features Once you’ ve configured the basic settings discussed in section 3.2, you may move to the settings of Advanced Features. In this section, we’ ll explain the setting of LAN IP ,D H C P ,F irew all, Privilege, V ir tual Ser ve[...]

3.4 VIEWING THE TOOLS Sy stem Log (F igure 20) Y ou can acquire the information of the system in this screen, including the time, the type and the message. Hacker Log (Figure 21) Y ou can detect the intrusion from this screen. This screen shows the infor mation of the unauthorized access request to your network. Reset (Figure 22) Yo u have two opti[...]