Lenoxx Electronics SL-326 инструкция обслуживания

® COMP ACT DISC PLA YER AM/FM STEREO CASSETTE RECORDER MODEL SL-326 OPERA TING INSTRUCTIONS  DIGIT AL RADIO WITH PRESETS  PLA YS ALL MUSIC COMP ACT DISCS  FULL Y PROGRAMMABLE CD PLA YER WITH REPEA T PLA Y  RECEIVES AM/FM STEREO BROADCASTS  RECORDS CASSETTES FROM CD OR RADIO  AC POWER INDICA TOR  LARGE BACKLIT LCD DISPLA Y FOR [...]

SAFETY INSTRUCTIONS The lightning flash and arrow head within the triangle is a warning sign alerting you of dangerous voltage inside the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE P ARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERS[...]

EXAMPLE OF ANTENNA GROUNDING AS PER NEC - NATIONAL ELECTRICAL CODE It is the intent of Lenoxx that this product be used in full compliance with the copyright laws of the United States and that prior permission be obtained from copyright owners whenever recording songs from the RADIO or CDs. Do not apply oil or petroleum products or solvents to a[...]

POWERING UP TIP If the plug of the AC power cord does not match your outlet, do not force it. Reverse it and try again. The plug is polarized and only fits one way into the wall outlet. 3 T o a wall outlet NOTE: One blade of plug and outlet is wider . Carefully unwind and stretch out the speaker wire on the back of each speaker box and plug the rig[...]

1 Press the CD FUNCTION switch, the display will show six zeros 0. 4 1 2 3 Press the PU S H OP EN button to open the CD DOOR and place the disc in the CD compartment. The label side of the CD should face upward. 2 4 Connect the AC power cord (see page 3). PL A YING A CD RADI O TA P E CD FU NCT I O N POWER Press the POWER switch, the AC POWER [...]

USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS T o Press or Adjust Adjust the volume VOLUME control Stop playback Pause playback The elapsed playing time will flash during pause. Press again to resume play after pause. Go to the next track Go back to the previous track Locate a point in a song or Press and hold down while playing until you find the p[...]

REPEA T PLA Y PL A YING CD SONGS (TRACKS) OVER AND OVER 2. Press the CD FUNCTION switch. 3. Select the track by pressing or , and then press . 4. Press the CD REPEA T button. T o repeat Press a single track (song) Press the REPEAT button twice all the tracks (all songs) Y ou can play CD tracks over and over in normal or programmed play modes (see p[...]

Y ou can make a program of up to 20 tracks in the order you want them to be played. PROGRAM 7 SELECTING YOUR OWN MUSIC PLA YING ORDER (Programmed Play) NOTE : Programming is only done during stop mode. TRA CK MEMORY MEMORY TR A CK 1 2 3 4 5 During STOP mode, press the PROGRAM (MEMORY) button. The display will show  , MEMORY and TRACK[...]

LISTENING TO THE RADIO Connect the AC power cord (see page 3). 1 1 2 3 Press the BAND switch to choose the proper band (AM or FM ) that you want. 4  STEREO  will light up when receiving FM Stereo broadcasts. 8 RADI O TA P EC D FUN CTI O N Press the RADIO FUNCTION switch. POWER Press the POWER switch, the AC POWER ST ANDBY INDICA T OR will be [...]

PRESETTING RADIO ST A TIONS 3 Press the PROGRAM (MEMORY) button again to confirm, the station now broadcasting is stored into that preset memory location.  MEMORY  disappears from the display. 4 Repeat the above steps to store other 19 stations into memory . While the  MEMORY  is flashing, press the PRESET (REPEA T) button to choose a m[...]

10 LISTENING TO THE PRESET ST A TIONS (after you programmed them) Connect the AC power cord (see page 3). 2 Press the AM/FM BAND switch to select the desired band. 1 Press the POWER switch, the dial will light. 3 Press the PRESET (REPEA T ) button several times to choose a memory location (01-20). Y ou will receive the station you stored into that [...]

PLA Y IN G A T A PE Connect the AC power cord (see page 3). Press the STOP/EJECT button to open the tape compartment and insert a recorded tape as shown. Close the door. 3 2 3 STOP/EJECT 11 1 1 2 RADI O TA PE CD F UN C TIO N Press the TAPE FUNCTION switch. POWER Press the POWER switch, the dial will light up. 4 4 PLA Y 5 When the set finishes playi[...]

USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Stop playback Eject the cassette Press or Adjust Adjust the volume VOLUME control Fast forward or rewind the tape FAST FORW ARD button or REWIND button Pause playback P AUSE button Press again to resume play after pause. EQUALIZER button VOLUME CONTROL P AUSE STOP/EJECT FAST FORWARD & REWIND PLA Y[...]

RECORDING ON A T APE Connect the AC power cord (see page 3). Press the STOP/EJECT button to open the tape compartment and insert a blank tape. Select the program source (AM, FM or CD) you want to record. 1 3 1 2 STOP/EJECT T o record from the CD player, insert a CD and follow the steps to play a CD (see page 4). T o record from a radio, press the R[...]

USE THESE BUTTONS FOR ADDITIONAL OPERA TIONS To Turn off the player Press the STOP/EJECT button and press the POWER switch to off, the AC POWER ST ANDBY INDICA TOR will go on. TIP Press or Adjust Stop recording STOP/EJECT button P AUSE button Press the button again to resume recording. Pause recording • T o erase a recording, just start a new rec[...]

PRECAUTIONS On Safety  As the laser beam used in the CD player section may be harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only .  Should any solid object or liquid fall into the player, unplug the player , and have it checked by qualified personnel before operating it any further. 15 [...]

PRECAUTIONS (continued) Notes on CDs  Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out.  Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.  Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it i[...]

MAINTENANCE Cleaning the Lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available lens cleaner and blower . Cleaning the T ape Heads Wipe the heads, the pinch roller and the capstan with a cleaning swab slightly moistened with cleaning fluid or alcohol after every 10 hours of operatio[...]

TROUBLE SHOOTING Problem Remedy The power is not on.  Connect the AC power cord to a wall outlet securely .  Make sure to press the right FUNCTION switch as you want.  Adjust the volume.  Unplug the headphones when listening through speakers.   flashes in the display even when a CD is in place.  Insert the CD with the label sid[...]

SPECIFICA TION General Description Power source: AC 120V , 60Hz 22Watts Speakers: 4  8 ohm Output power: 3.0W/channel Dimensions (approx.): 5 7 / 8  9 1 / 4  9  5LBs CD Section Plays disc type: Any normal CD used in portable players Laser wavelength: 760 - 800 NM Tracking method: 3 - spot error detection 3.86 mm lens T ape Recorder Sect[...]