Lanner electronic FW-7650 инструкция обслуживания

FW -7650 Series 19” 1U Intel Pentium4 / Celeron Rackmount Network Security Platform User’s Manual[...]

ii Copyright and Disclaimers © Copyright 2004 - Lanner Electronics Inc. All Rights Reserved The contents in this publication have been thoroughly checked and considered accurate. The publisher and manufacturer of this product, La nner Electronics, is not responsible for any violation of patents or other rights of third parties resulting from its u[...]

iii Safety Instruc tions The following information relates to the safety of installation and maintenance personnel. Read all instructions before attempting to unpack, insta ll or operate this equipm ent, especially before connecting the power adapter . Please keep the following in mind as you unpack and install this equipment:  Always follow bas[...]

iv Getting T echnical Assistance Should you encounter questions or probl ems w ith your FW -7650, Lanner Electronics is ready to assist you within the guidelines of our product support programs. First, check the electronic product documentation for assistance. If you still cannot find the solution to your problem, contact Lanner sales team with the[...]

v T able of Contents Copyright and Disclaimers ....................................................................................................ii T rademark Acknowledgments ...............................................................................................ii Radio Frequency Emissions Notice...........................................[...]

vi 3.4 BIOS Features Setup .................................................................................. 27 3.5 Chipset Features Setup ............................................................................... 30 3.6 Integrated Peripherals ................................................................................. 32 3.7 Power Manag[...]

1 C h a p t e r 1 Getting Started 1.1 Introduction Figure 1 – FW -7650 Outlook The FW -7650 is a 1U rackmount network security solution targeting the Enterprise market. The FW -7650 supports Petium4 /Celeron processor with 400/533MHz FSB. It is designed with an Intel 845GV as its northbri dge and IC H4(82801DB) as its southbridge.; T o enhance ne[...]

2 1.2 T echnical Specifications Model Name FW-7650 SBC SBC MB-X71 CPU Socket 478 for Intel ® Pentium ™ 4/Celeron Processor , up to 2.4GHz,533MHZ FSB Chipset Intel ® 845GV chip set (pin-t o-pin comp atible with 845G series); 82801 DB I/O Controller Hub 4 (ICH4) BIOS Award BIOS Memory T wo DDR200/266/333 DIMM Socket, up to 2GB RAM Network interfa[...]

3 1.3 Packing Contents Carefully unpack your package and make sure that you have the following items.  FW -7650 Network security Platform  Console cable  1.8 meters long cross-over Ethernet cable  1.8 meters long straight-through Ethern et cable  Face panel name plate label  Power cable  Drivers and User ’ s Manual CD  Scr[...]

4 1.4 MB-X71 System Board MB-X71 is the system board bundled with the FW -7650 Network security platform. The succeeding sections list all MB-X71 related jump er settings and connector pin a ssignments. 1.4.1 Board Layout Figure 3 – MB-X7 1 Jumpers and Connectors[...]

5 1.4.2 Jumper Settings and I/O Connector The onboard jumper settings and I/O connector of MB-X71 are custom-tailored to fit the FW -7650 functionality . Changing the jumper se ttings may result in system malfunction or unforeseen damages. Jumper Settings and I/O Connector Summary for MB-X71 JUMPER FUNCTION CMOS1 Clear CMOS Data SCF1 Master/Slave S[...]

6 1.4.3 Connector Pin Assignments SFC1:Master/Slave Select Compact Flash Card ATA D i s k C h i p SCF1 Master Slave 1-2 Slave Master 2-3(Default CMOS1:Clear CMOS Data CMOS1 Description 1-2 Normal (Default) 2-3 Clear CMOS FAN1~3 : 3 Pin FAN Connector Pin No. Description 1 Ground 2 +12V 3 FA N S ta t u s LANA1~2 :Type 1 ( RJ-45) Description Pin No. F[...]

7 LANA3~6 :Type 1 ( RJ-45) Pin No. Description 1 TX+ 2 TX- 3 RX+ 4 T45 5 T45 6 RX- 7 T78 8 T78 COMA1: RS-232 Serial Port #1 Connector ( D-Sub ) Pin No. Description 1 Data Carrier Detect ( DCDA # ) 2 Receive Dat a ( RXDA ) 3 T ransmit Dat a ( TXDA ) 4 Dat a T erminal Ready ( DTRA # ) 5 Ground ( GND ) 6 Dat a Set Ready ( DSRA # ) 7 Request T o Send ([...]

8 PSA1:20 Pin ATX Power Connector Pin No. Description Pin No. Description 1 +3.3V 11 +3.3V 2 +3.3V 12 -12V 3 GND 13 GND 4 +5V 14 SWITCH 5 GND 15 GND 6 +5V 16 GND 7 GND 17 GND 8 Power Good 18 -5V 9 S tand-By 5V 19 +5V 10 +12V 20 +5V PS4P1:4-Pin Power Connector (P4-4P Male ) Pin No. Description 1 GND 2 GND 3 +12V 4 +12V KPA1 ： LCM Keypad Pin No. De[...]

9 VGAB1 : External VGA Connector ( 12 Pin Header ) Pin No. Description Pin No. Description 1 R 2 Ground 3 G 4 Ground 5 B 6 Ground 7 H-SYNC 8 Ground 9 V -SYNC 10 Ground 11 Detect-displ ay Data 12 Detec k-display CLOCK IDEA1 : IDE Interface Connector ( 44Pin 2.0mm Pitch Header ) Pin No. Description Pin No. Description 1 Reset # 2 Ground 3 Data 7 4 Da[...]

10 PLRS1:Power LED,HD LED,Reset, Speaker Connector(11 Pin 2.54mm ) Pin No. Description 1 Power LED + 2 Power LED + 3 GND 4 HDD LED + 5 HDD LED - 6 RESET SW + 7 RESET SW – (GND) 8 External S peaker - 9 Internal Buzzer - 10 NC 11 External S peaker + FDCA1 : Floppy Interface Connector ( 34 Pin Header ) Pin No. Description Pin No. Description 1 Groun[...]

11 CF1:Compact Flash Connector Pin No. Description Pin No. Description 1 GND 26 CD1- 2 DA T A3 27 DA T A1 1 3 DA T A4 28 DA T A12 4 DA T A5 29 DA T A13 5 DA T A6 30 DA T A14 6 DA T A7 31 DA T A15 7 CE1# 32 CE2# 8 A10 33 VS1# 9 OE# 34 IOR# 10 A9 35 IOW# 11 A8 36 WE# 12 A7 37 READY# 13 CFVCC3 38 CFVCC3 14 A6 39 CSEL 15 A5 40 VS2# 16 A4 41 RESET 17 A3[...]

12 LEDE1 ： 2x22 Pin Pin No. Description Pin No. Description 1 POWER LED 2 POWER LED 3 POWER LED ST A TUS 4 POWER LED ST A TUS 5 Lan1 Link/Active LED- 6 Lan1 Link/Active LED+ 7 Lan1 100 LED- 8 Lan1 100 LED+ 9 Lan1 1G LED- 10 Lan1 1G LED+ 11 Lan2 Li nk/Active LED- 12 Lan2 Link/Active LED+ 13 Lan2 100 LED- 14 Lan2 100 LED+ 15 Lan2 1G LED- 16 Lan2 1G[...]

13 IDEB1 : IDE Interface Connector ( 40Pin 2.54mm Pitch Header) Pin No. Description Pin No. Description 1 Reset # 2 Ground 3 Data 7 4 Dat a 8 5 Data 6 6 Dat a 9 7 Data 5 8 Dat a 10 9 Data 4 10 Dat a 1 1 11 Data 3 12 Dat a 12 13 Data 2 14 Dat a 13 15 Data 1 16 Dat a 14 17 Data 0 18 Dat a 15 19 Ground 20 NC 21 DMA REQ# 22 Ground 23 IOW # 24 Ground 25[...]

14 PCIB1:124 Pin Mini PCI Socket Pin No. Description Pin No. Description 1 TIP 2 RING 3 8PMJ-3 4 8PMJ-1 5 8PMJ-6 6 8PMJ-2 7 8PMJ-7 8 8PMJ-4 9 8PMJ-8 10 8PMJ-5 11 LED1_GRNP 12 LED2_YELP 13 LED1_GRNN 14 LED2_YELP 15 CHSGND 16 RESERVED 17 INT -B 18 +5V 19 +3.3V 20 INT -A 21 RESER VED 22 RESERVED 23 GROUND 24 3.3V AUX 25 CLK 26 RST 27 GROUND 28 +3.3V 2[...]

15 PCIB1:124 Pin Mini PCI Socket (Continued last page) Pin No. Description Pin No. Description 61 IRDY 62 GROUND 63 +3.3V 64 FRAME 65 CLKRUN 66 TRDY 67 SERR 68 STOP 69 GROUND 70 +3.3V 71 PERR 72 DEVSEL 73 C_BE-1 74 GROU ND 75 AD14 76 AD15 77 GROUND 78 AD13 79 AD12 80 AD1 1 81 AD10 82 GROU ND 83 GROUND 84 AD9 85 AD8 86 C_BE-0 87 AD7 88 +3.3V 89 +3.3[...]

16 1.5 FW -7650 19” 1U Rackmount Firewall Mechanisms This section of the manual describes the mechan ical and device nomenclature of FW -7650. 1.5.1 Face Panel Figure 5 – FW -7650 Face Panel Face Panel LED S tatus and Behavior The following table lists and explains the beha vior of each LED on the FW -7650 front panel. LED Color St a t u s Desc[...]

17 1.5.3 Rear View Figur e 6 – FW -7650 Rear V iew  Power Switch: Click the Power Switch , and the system will be power on. Faulty or impr oper use of the power adap tor may cause permanent damage to the power supply and the FW -7650. Plug the adap tor to an electrical wall outlet that matches its specifications. Blowhole Power Switch Power So[...]

C h a p t e r 2 FW-7650 Hardware Installation Guide 2.1 Hardware Installation Guide Inside of FW-7650 - CPU Installation Step 1 : Locate the ZIF socket and open it by fi rst pulling the lever of socket upward. Step 2 : Insert the CPU into the socket. Please keep the lever right angle when inserting CPU. St e p 1 St e p 2[...]

Step 3 : When inserting the CPU please note the correct orientation as shown. The notched corner should point toward the end of the lever Step 4 : Push the lever down to close the socket. Step 5 : Please take the screw off. Step 6 : Please find a cooler (Fan+Heat Sink) within the packing, attach it into the CPU. Step 7 : Finally , connect the fan c[...]

Step 3 : Press the latches into the notches of the RAM module. How to Remove the Hard Disk Bay Step 1 : Open both latches of mobile rack by press it. Step 2 : Use two hands to pull out the mobile rack. Step 3 : Remove the mobile rack straight and smooth. How to Remove the Hard Disk Bay Step 1 : Use screwdriver to remove four screws on the cover Ste[...]

Step 5 : Put the cover back. Step 6 : Screw the cover. - Installing Compact Flash Card Step 1 : Insert the compact flash card into the sl ot carefully as shown in the picture. - Installing the Mini-PCI Card Step 1: Insert the PCI expansion card into the mini-PCI slot at 45 degree. St e p 2 : Push down the PCI expansion card and the PCI expansion ca[...]

Chapter 3 Award BIOS Setup 3.1 BIOS Setup A ward‘s ROM BIOS provides a built-in Setup prog ram that allows users to modify the basic system configuration and settings. The modified data will be stored in a battery-backed CMOS RAM so that this data will be retained even when the power is turned of f. In general, the information saved in the CMOS R[...]

<Esc> Main Menu - Quit and not save changes in to CMOS Status Page Setup Menu and Option Page Set up Menu - E xit curr ent page and return to Main Menu <+/PgUp> Increase the numeric value or m ake changes <-/PgDn> Decrease the nu meric value or make chang es <F1> General help, only for Status Pa ge Setup Menu and Option Pag [...]

Listed below are explanation of the keys displayed at the bottom of the screen: <ESC> : Exit the utility . < Ç È Æ Å > : Use arrow keys Ç È Æ Å to move cursor to your desired selection. <F1> : General Help <F5> : Previous V alues <F6> : Fail-Safe Defaults <F7> : Optimized Defaults <F10> : Saves all [...]

 Set Supervisor Password: Use this menu to set Supervisor Passwords  Set User Password: Use this menu to set User Passwords.  Save & Exit Setup: Save CMOS value changes to CMOS and exit setup  Exit Without Saving: Abandon all CMOS value changes and exit setup 3.3 Standard CMOS Features The items in S tandard CMOS Setup Menu are divi[...]

Item Options Description Date Mont h DD YYYY Set the system date. Note that the ‘Day’ automatically ch anges when you set th e date Time HH : MM : SS Set the system time IDE Channel 0 Master Options are in its sub menu Press <Enter> to enter the sub menu of detailed options IDE Channel 0 Slave Options are in its sub menu Press <Enter&g[...]

IDE Channel 0 Master None Auto Manual Selecting ‘manual’ lets you set the remaining fields on this screen. Selects the type of fixed disk. "User T ype" will let you select the number of cy linders, hea ds, etc. Note : PRECOMP=65535 means NONE ! Capacity Auto Display your disk dr ive size Disk drive capacity (Approxima ted). Note that [...]

V irus W arning: The default setting of V irus W arning is “Disabled”. When it is enabled, any attempt to write the boot sector and partition table will halt the s ystem and cause a warning message to appear . If this happens, you can use an anti-virus utility on a virus free, bootable floppy diskette to reboot, to clean and t o investigate you[...]

PS/2 Mouse Function Contr ol : When this option is set Enabled , AMIBIOS supports a PS/2 type mouse. The settings are Enabled or Disabled . The default setting is Disabled . System Boot Up Sequence. HDD S.M.A.R.T . for Capability : This allows you to activate the S.M.A.R.T . (Self-Monitoring Analysis & Reporting T echnology) capability for the [...]

3.5 Chipset Features Setup DRAM Clock : The chipset support synchronous and asynchronous mode between the host clock and DIMM clock. Host CLK (default) DIMM clock equal to host clock 66MHz DIMM clock equal to 66MHz SDRAM Cycle Length : This item allows you to select the SDRA M cycle length. The settings are 2 or 3. CAS latency T ime: When synchrono[...]

between the CAS and RAS strobe signals, used when DRAM is written to, read from, or refreshed. Fast gives faster performance. This field applies only when synchronous DRAM is installed in the system. DRAM RAS# Pr echarge T ime: If an insufficient num ber of cycles is allowed for the RAS to accumulate its charge before DRAM refresh, the refresh may [...]

3.6 Integrated Peripherals On-Chip (Primary/Secondary) PCI IDE : The Intel 82C440BX chipset contains a PCI IDE interface with support fo r two IDE channels. Select Enabled to activate the primary and/or secondary IDE inte rface. Select Disabled to deactivate this interface, if you install a primary and/or secondary add-in IDE interface. IDE Prefetc[...]

USB Keyboard Support : Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have a USB keyboard. Init Display First : This item allows you to decide to active whether P CI Sl ot of VGA card or AGP first. The settings are “PCI Slot” and “AGP Slot”. Onboard FDD Contr oller : Select Enabled if your system has [...]

3.7 Power Management Setup The Power Management Setup allows you to c onfigure you system to most ef fectively save energy while operating in a manner consistent with your own style of computer use. This category allows you to select the type (or degree) of power saving and is directly related to the following modes: 1. HDD Power Down 2. Doze Mode [...]

There are four selections for Power Manage ment, three of which have fixed m ode setting Disable (Default) No power management. Disables all four modes. Min. Power Saving Minimum power management. Doze Mode =1hr . Standby Mode =1hr ., Suspend Mode=1hr ., and HDD Power Down=15min. Max. Power Saving Maximum power management. –Only available for SL [...]

3.8 PnP/PCI Configuration This section describes configuring the PCI bus system. PCI, or P ersonal C omputer I nterconnect, is a system which allows I/O devi ces to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended [...]

The settings are : “Enabled and Disabled”. Resour ce Contr olled By : The A ward Plug and Play BIOS has the capacity to automatically configure all of the boot and Pl ug and Play compatible devices. However , this capability means absolutely nothing unless you are using a Plug and Play operating system such as W indows ® 98. If you set this fi[...]

ISA/EISA and PCI/PnP . DMA Resour ces : The sub menu can let you control the DMA resource. DMA Resour ces : The sub menu can let you control the DMA resource. DMA Channel 0/1/3/5/6/7: These items s pecify the bus that the sy stem DMA(Direct Memory Access) channel is used. The settings determine if AMI BIOS should remove a DMA from the available DMA[...]

C0000,C4000,C8000,CC000,D0000,D4 000,D8000,or DC000. PCI/VGA Palette Snoop : Leave this field at “Disabled”. The settings are “Enabled”, “Disabled”. PCI Latency T imer (PCI Clocks): This option is used t o control PCI latency timer period (follow PCI clocks). Based on PC I specification 2.1 or later and PCI bus frequency in system, user[...]

3.9 PC Health Status CPU T emperature, Fan1 Speed, Fan2 Sp eed , Fan2 Speed, VCORE, +2.5, +3.3V , +5V , +12V : These items display the current status of all monitored hardware devices/components such as system voltages, temperatures and fan speeds.[...]

3.10 Load Optimized Defaults When you press “Enter” on this item, you get a confirmation dialog box with a message similar to: Load Optimized Defaults (Y/N) ? N Pessing “Y” loads the default values that are factory settings for optimal performance system operations 3.11 Supervisor/User Password Setting Te “SUPER VISOR/USER P ASSWORD” ut[...]

3.13 Exit Without Saving Pressing <Enter> on this item asks for confirmation: Quit without saving (Y/N)? Y This allows you to exit Setup without st oring in CMOS any change. The previous selections remain in effect. This exits the Setup utility and restarts your com puter.[...]

Appendix A Power Supply Power Supply Specification AC Input Spec : VOL T AGE 100 - 240 V AC F ULL RANGE (±10% tolerance) Output Specifications Output V oltage Output Current Min. Output Current Max. Regulation Load Regulation Line Output Ripple & Noise Max 5V 3 25.00 ± 5% ± 1% 50mV 12V 2 8.00 ± 7% ± 1% 100mV -5V 0.05 0.50 ± 10% ± 1% 120m[...]

Appendix B Watchdog Timer Intr oduction Most systems need to be self-reliant. It's not usually possible to wait for someone to reboot them if there are so me component wrong. Some system designs, such as space probes, are simply not accessible to human operators. If t he system ever hangs, such systems are perm anently disabled. In other cases[...]

the WDT status register will set . W atch Dog T imer Control Register (Index =71h, Default=00h) Bit Description 7 WDT is reset upon a CIR interrupt 6 WDT is reset upon a KBC(mouse) interrupt 5 WDT is reset upon a KBC(keyboard) interrupt 4 WDT is reset upon a read or a write to the Game Port base address 3-2 Reserved 1 Force Time-out. This bit is se[...]

A p p e n d i x C Console Redirection Console redirection allows you to maintain a system from a remote location by re-directing keyboard input and text output through the serial port. T his section will tell you how to use console redirection. 1. Please insert console cable between on FW -7650 and Remote Client System. 2. Setup BIOS in FW -7650. B[...]

A p p e n d i x D LCD Module and Key Pad For FW-7650 Purpose The purpose of this document is to provide insta llation inform ation for the LCD module and key pad installed in the FW -7650. Specification overview The LCD module is designed to provide real-time opera ting status and configuration information for the system. Y ou can reference the doc[...]

=>Direct write the function to your program. 2.Read_KeyPad(); =>This Function get the KeyPad number if user pressed key . =>Direct write function to your program. Ex. int a; a=Read_KeyPad(); Return V alue: "1"=>The Upper Key "2"=>The Down Key "3"=>The Enter Key "4"=>The ESC Key 3.Show_Dat[...]

Terms and Conditions Date:2004. 07.08 W arranty Policy 1. All products are warranted a gainst defects in materials and workmanship f or a period of two years from the date of your purchase. 2. The buyer will bear the return freigh t charges for goods return ed for repair within the warran ty period; whereas manufacturer will bear the after se rvice[...]

RMA Service Request Form When requesting RMA service, please fill out this RMA Service Request Form . W ithout this form your RMA will be REJECTED!!! RMA No: Reasons to Return: □ Rep air(Please include failu re details) □ T esting Purpose Company: Contact Person: Phone No. Purchased Date: Fax No.: Applied Date: Return Shipping Address: Shipping[...]

PEXNSD01-040709 V ersion 1.0 Printed and published in T aiwan[...]