Konig SAS-IPCAM110B инструкция обслуживания

S A S -IPC AM110 MANUAL IP CAMERA[...]

ENGLISH 2 Introduction: Install the IP camera in your home and watch over your properties. It is easy to set up and requires no complex conguration: just plug and play. The free uCare Cam app, available on Google Play and the Apple App Store, allows you to view the camera remotely on your smartphone or other mobile devices anytime, anywhere. Equ[...]

ENGLISH 3 Product description: 1. Microphone 2. Light intensity sensor 3. Lens 4. IR LED 5. Loudspeaker 6. Antenna 7. Micro SD card slot 8. 5V DC input 9. IO alarm connector 10. Ethernet connector Bottom: • Wi/Ethernet switch • Connection for wall mount • WPS/RESET button User instructions: A. Hardware Installation 1. Please nd[...]

ENGLISH 4 Warning: Please use the power adapter included with your camera to avoid damage to the camera. When the camera powers up, the status LED will be Green for about 15 seconds before ashing Red. If there is no Red LED ashing, please unplug the power cord, wait 5 seconds, then re-connect the power again. It will take about 60 seconds for[...]

ENGLISH 5 1. Router Mode 2. WPS (WiFi Protect Setup) Mode (Requires a Router with WPS function using WPA/WPA2 encryption - WEP encryption will not work) Play List Tab Go to this Tab to view all Pictures taken by User via Smartphone. The Pictures will be listed by camera. Setting Tab Congure uCare Cam settings and playback remote microSD Card vid[...]

ENGLISH 6 1. Make sure the status LED on uCare Cam is blinking Red and Green. If the status LED is not blinking Red and Green, please press and hold the WPS/REST button for 10 seconds to reset uCare Cam. Wait for 1-2 minutes for it to restart and the LED should become Red and Green. 2. Connect your iOS device to the router inside uCare Cam. To conn[...]

ENGLISH 7 your Router supports WPS is to look for a button that says “WPS” on the Router. It may also be called “AOSS” or “QSS”. 1. Press and hold the WPS/REST button for 10 seconds at the back of the camera. It will reset and restart the uCare Cam. After about 60 seconds, the LED color should ash Green and Red. 2. Press “WPS” bu[...]

ENGLISH 8 7. Please enter a Camera name (2 to 20 characters) and default password “0000”. You are encouraged to change the default password after setup for security purposes. Then click “OK” in the top right corner. 8. The camera will restart and the Smartphone App will automatically connect to the camera in Live View. 9. When uCare Cam suc[...]

ENGLISH 9 Method 2: Scan QR Code at back of uCare Cam 1. Make sure your Smartphone is connected to the internet. Open up the Smartphone APP “uCare Cam” and click on the “+” at the top right of the screen. 2. Click on “ Scan camera QR code ”. 3. You will see your Smartphone camera live view. Face your Smartphone camera towards the QR cod[...]

ENGLISH 10 Method 1: Scan for uCare Cam in local intranet 1. Make sure your Smartphone is connected to the same Router as your uCare Cam. Open up the Smartphone APP “uCare Cam” and click on the “ Click here to import installed WiFiCam ” at the top of the screen. 2. Click on “ Search ”. 3. You will see a list of UID’s that were found o[...]

ENGLISH 11 2. Click in the “ UID ” eld to enter typing mode. 3. Type in 20 digit code exactly as printed underneath the QR code in back of uCare Cam. 4. Please enter a Camera name (2 to 20 characters) and the camera password. Default password is 0000. Click “ OK ” on the bottom of the screen. 5. You will see the Camera name now in Camera[...]

ENGLISH 12 Typical scenario will be that the uCare Cam is installed at home or in the oce and the Smartphone has a 3G/3.5G/4G internet connection. Typical frame rate will be around VGA 640x480 10~15fps. 3) Relay Mode uCare Cam and Smartphone cannot establish a point to point network connection link. uCare Cam must send Audio/Video data to a Rela[...]

ENGLISH 13 Connection Status Information Take Photo Playlist User can view, delete, and copy picture les. Camera le folder File list per camera[...]

ENGLISH 14 Photo view File delete Settings Manage uCare Cam (Default manager name: admin , Default Password: 0000 ) Only one User can manage a camera that is online and connected to Smartphone APP at any one time. Here, User can: • Check Camera Info • Change WiFi Router • Change Alarm Settings – “Warning & Notify Setting” ?[...]

ENGLISH 15 1) Change WiFi Router User can remotely switch the camera to connect to a dierent WiFi Router. 2) Alert & Notify Setting / Warning & Notify Setting The camera has a number of hardware alarm detection possibilities. User can set the desired trigger and notication. When a new event is generated, the APP will notify the User e[...]

ENGLISH 16 Set Email Alerts To setup your email to receive motion/sound/etc. alerts, please login to the “Settings” page with Manager name and password (default: admin / 0000). 1) Click on “Alert & Notify Setting” or “Warning & Notify Setting”. 2) Click on “Email snapshot alert” 3) You will see a variety of options. You can [...]

ENGLISH 17 • SMTP Mail Settings – only either SMTP or Gmail mail settings can be set. Please enter your email provider’s SMTP server settings. You may need to contact your email provider for the server settings. Please enter your email address and email password. This account will be used as the “Sender” or “From” for the email ale[...]

ENGLISH 18 4) SD Card Recording Setting User can insert a microSD card into the camera to enable the recording function. Trigger Recording: The camera will automatically start recording when a trigger event (motion, sound, and other events) have occurred. The camera will record for 60 seconds. If another trigger event occurs, the camera will record[...]

ENGLISH 19 6) Password Setting The two-level password management system allows the user to safely and eectively manage the camera. First layer: Camera password – able to view the camera. Default value is 0000 Second layer: Manager’s Name and Password – able to view and set uCare Cam settings. Default value : admin / 0000 7) Date & Time[...]

ENGLISH 20 J. Update your uCare Cam rmware 1. Download rmware and un-compress the le. 2. Copy “update.bin” to microSD Card top folder, for example H: 3. Turn o power to uCare Cam and insert microSD card into uCare Cam microSD slot in back of uCare Cam. 4. Turn power on to uCare Cam. 5. uCare Cam will start reading data from microSD[...]

ENGLISH 21 2) The live video stream is very slow. uCare cam will automatic adjust video streaming speed according to smartphone’s internet connection. It will start sending video from a low frame rate and gradually increase the frame rate. It may take 1-2 minutes for the frame rate to stabilize. If performance is still not satisfactory – a. Ple[...]

ENGLISH 22 7) Why can’t uCare Cam connect with WiFi Router using WPS Mode? a. Make sure Router’s WPS function is enabled. b. Please try Router model if WPS mode setup failed. 8) What is the frequency of email alert and smartphone notify alert? Ans: Once motion or sound detection is triggered, then uCare Cam will send email and phone notify imme[...]

ENGLISH 23 Maintenance: Clean the product only with a dry cloth. Do not use cleaning solvents or abrasives. Warranty: Any changes and/or modications to the product will void the warranty. We cannot accept any liability for damage caused by incorrect use of this product. Disclaimer: Designs and specications are subject to change without notice[...]