Klark Teknik DN 9650 инструкция обслуживания

Midas Klark T eknik Limited, Klark Industrial Park, W alter Nash Road, Kidderminster . Worcestershire. DY1 1 7HJ. England. T el: +44 1562 741515 Fax: +44 1562 745371 Email: info@midasklarkteknik.com Website: www .klarkteknik.com DN9650/DN9652 Network Bridge Operator Manual DN9650/DN9652 Network Bridge — Operator Manual DOC02-DN9650/52 Issue A —[...]

[...]

IMPORT ANT SAFETY INSTRUCTIONS The lightning flash with arrowhead symbol within an equilater al triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equil[...]

INSTRUCTIONS DE SÉCURITÉ IMPORT ANTES Le symbole représentant un éclair fléché dans un triangle équilaté ral a pour but d'alerter l'utilisateur de la présence d'une "tension dangereuse" non isolée à l'intérieur du boîtier , pouvant être d'une force suffisante pour constituer un risque d'électro[...]

EC-Declaration of Conformity Klark Teknik DOC04-DN9650ECDOC Rev. A EC-Declaration of Conformity The undersigned, representing the following manufacturer Manufacturer: Address: Midas Klark Teknik Ltd. Klark Industrial Park, Walter Nash Road, Kidderminster. Worcestershire. DY11 7HJ. hereby declares that the following product Product Type Number Produ[...]

[...]

EC-Declaration of Conformity Klark Teknik DOC04-DN9652ECDOC Rev. A EC-Declaration of Conformity The undersigned, representing the following manufacturer Manufacturer: Address: Midas Klark Teknik Ltd. Klark Industrial Park, Walter Nash Road, Kidderminster. Worcestershire. DY11 7HJ. hereby declares that the following product Product Type Number Produ[...]

[...]

Licences The following are the license agreements applicable to this equipment. End-User Licence Agreement for Mi das™ and Klark Teknik™ Software IMPORTANT - Please read this document carefully before using this Midas™ or Klark Teknik™ Product. This is an agre ement governi ng your use of software or other machine instructions already insta[...]

DA TE INFORMA TION. Y ou understand that the Co mpany may update or revise the Softw are but in so doing incurs no obligation to furnish such updates to you. However , the Company may in its discretion make updates av ailable from time to time upon such terms and conditions as it shall determine. It is a condition of the above warr anty that you in[...]

and the Courts of England and W ales will have ex clusive jurisdiction to hear and decide any dispute c oncerning it or its f ormation. No breach by you of any provision of this Licence shall be waived or discharged except with the express written consent of the Company and no failure or delay by the Company to exercise an y of its righ ts under th[...]

[...]

DN9650 Network Bridge Operator Manual xiii Contents Chapter 1 Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Handling[...]

Contents DN9650 Network Bridge xiv Operator Manual Appendix C Service Information . . . . . . . . . . . . . . . . . . . . . . . . . 33 Restoring the factory de faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Routine maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Cleaning . . . . . . . . . [...]

DN9650/DN9652 Network Bridge Operator Manual 1 Chapter 1: Getting Started This chapter shows you how to prepare the DN965X for operation, which includes: • Unpacking • Installation • Connect ing up • Switching the unit on/of f • Initial configuration Before installing, setting up or operating this equipm ent, make sure you have read and f[...]

Chapter 1: Getting Started DN9650/DN9652 Network Bridge 2 Operator Manual Handling the equip ment Completely isolate the equipment electrically and disconnect all cables from the equipment before moving it. When lifting or moving the equipment, always take its size and weight into consideration. Radio frequency interference - Cl ass A device This e[...]

Powering the unit DN9650/DN9652 Network Bridge Operator Manual 3 Typical DN9652 audio connection configuration Powering the unit This section shows you how to connect the unit to the mains, switch the unit on/off and electrically isolate the unit. The internal power supplies are of the switch mode type that automatically sense the incoming mains vo[...]

Chapter 1: Getting Started DN9650/DN9652 Network Bridge 4 Operator Manual Configuring the unit for the first time Important: Before you use the unit fo r the first t ime, you mu st configur e your comp uter with the IP address and netmask to suit the range used by the DN965X. Before you can use the DN965X as a networ k bridge, you must first co nfi[...]

Configuring the unit for the first time DN9650/DN9652 Network Bridge Operator Manual 5 6 The DN965X NETWORK BRIDGE CONFIGURATION menu will open in the web browser’s Klark Te knik DN965X Configuration tab. >> To select which network card(s) are fitted in the unit 1 In the configuration m enu, click Change Module Type in the desired network m[...]

Chapter 1: Getting Started DN9650/DN9652 Network Bridge 6 Operator Manual[...]

DN9650/DN9652 Network Bridge Operator Manual 7 Chapter 2: Overview Thank you for purchasing a Klark Teknik DN9650/DN9652 Network Bridge. The DN965X is a user-friendly, high-performance, digital audio network bridge. Both the DN9650 and DN9652 units compliment each other. The DN9650 allows AES50-equipped Midas digital systems, such as the XL 8 and P[...]

Chapter 2: Overview DN9650/DN9652 Network Bridge 8 Operator Manual Front and rear panels of the DN9652 Network Bridge Since the network clock domains (A and B) contain digital audio, an intermediate asynchronous sample rate converter (ASRC) effe ctively resamples the audio as it passes between them, while obeying Nyquist sampling theory 1 . The ASR[...]

Host software version and updates DN9650/DN9652 Network Bridge Operator Manual 9 • Supports up to 64 bi-directional channels of 24-bit, 96kHz audio per network or AES50 port (DN9650 only) with 1:1 channel mapping. • Supports operation at 48kHz and 96kHz samp ling frequencies. Bi-directional ASRC on every channel with bypass facility to isolate [...]

Chapter 2: Overview DN9650/DN9652 Network Bridge 10 Operator Manual About this manual This is the operator manual for the DN9650 and DN9652 Network Bridge units. It is intended to help get your units installed and in operation as quickly as possible by giving you unpacking, installation, connection, configuration and setting up instructions. To hel[...]

DN9650/DN9652 Network Bridge Operator Manual 11 Chapter 3: Front Panel This chapter describes the front panel of the DN9650 and DN9652 units, which comprise the following. Front panel of the DN9650 (top) and DN9652 (bottom) Item Description Illustration 1 Ventilation grill Air intake for internal cooling via an internal fan. Do not obstru ct. N/A 2[...]

Chapter 3: Front Panel DN9650/DN9652 Network Bridge 12 Operator Manual 5 NETWORK section This section shows the status of the network module connection, as follows: • Constantly illuminated green with red extinguished = cable/fibre is synchronised, but there is no audio activity . • Pulsating green with red extin guished = cable/fibre is on wit[...]

Front panel DN9650/DN9652 Network Bridge Operator Manual 13 Table 1: DN9650 ASRC LED statu s Table 2: DN9652 ASRC LED statu s AES50 OUTPUT LEDs ASRC ENABLED LED NETWORK OUTPUT LEDs Status Y ellow LED = off Red LE D = of f Off Y ellow LED = off Red LE D = of f When ASRC is disabled, AES50 and network output indication does not play any role. Y ellow[...]

Chapter 3: Front Panel DN9650/DN9652 Network Bridge 14 Operator Manual[...]

DN9650/DN9652 Network Bridge Operator Manual 15 Chapter 4: Rear Panel This chapter describes the rear p anel of the DN9650 and DN9652 units, which comprise the following. Figure 1: Rear panel of the DN965X Item Description 1 Ventilation grill Air outtake for internal fan cooling. Do not obstruct. 2 Mains input section (see “Mains input” on page[...]

Chapter 4: Rear Panel DN9650/DN9652 Network Bridge 16 Operator Manual Mains input Always replace the mains fuse with on e of the same type and rating, as printed underneath the fuse drawer. The mains input section has a mains IEC socket, mains fuse compartment and on/off switch. Printed underneath is the mains supply voltage and fuse specifications[...]

DN9650/DN9652 Network Bridge Operator Manual 17 Chapter 5: Configuring the DN965X This chapter shows you how to configure the DN965X. Although this chapter uses the DN9650 as an example, the procedures also apply to the DN9652 unle ss stated otherwise. About DN965X configuration The DN965X is configured via a simple me nu-driven user interf ace (co[...]

Chapter 5: Confi guring the DN965X DN9650/DN9652 Network Bridge 18 Operator Manual Figure 2: Typical configuration menu Item Screen elem ent 1 Unit type and title of web page. 2 Status A view -only section that shows the communication status of the network module(s) and/or the three AES50 audio ports. 3 Front Panel Shows the current display of the [...]

Changing the displayed text DN9650/DN9652 Network Bridge Operator Manual 19 Changing the displayed text The LCD display has two rows (lines) of 16 characters that support ASCII characters. >> To change the text displayed on the DN965X’s LCD screen 1 In the Front Panel section of the configuration window, click Change LCD Text. 2 In the Line[...]

Chapter 5: Confi guring the DN965X DN9650/DN9652 Network Bridge 20 Operator Manual 2 In the Change XXX Module Settings window , choose the desired options. For example, select the sample frequency as 96kHz and the clock source as MADI Clock (Slave) for a Lab X MADIX MADI module. 3 Click OK. >> To change the settings of a Kla r k Teknik 3-Por [...]

Ethernet IP Addressing DN9650/DN9652 Network Bridge Operator Manual 21 Ethernet IP Addressing The IP address (default 192.168.10.10) can be changed via the configuration menu to allow operation as part of an Ethernet network. The default netmask value is 255.255.0.0, but you can also modify this if you want. >> To change the IP address of the[...]

Chapter 5: Confi guring the DN965X DN9650/DN9652 Network Bridge 22 Operator Manual Updating the unit’s host software The upgrade procedure involves transferring a number of files individually to the DN965X unit. The files are supplied in a si ngle TAR file. Before you can begin the upgrade these files must be ‘unzipped’ to a location that is [...]

Updating the unit’s host softwa re DN9650/DN9652 Network Bridge Operator Manual 23 3 With the desired file displayed in the Choose Update File field, click OK. The Updating window will open, showing that the update is in progress. 4 When the file has been updated you should see an Upgrade successfully transferred message (typically as shown below[...]

Chapter 5: Confi guring the DN965X DN9650/DN9652 Network Bridge 24 Operator Manual The unit will automatically reb oot to apply the changes. At this point you must monitor the reboot progress on th e LCD display screen, which will show the following messages, finally displaying t he default. Note the IP address during the reboot. 7 When the default[...]

DN9650/DN9652 Network Bridge Operator Manual 25 Chapter 6: Operation Although there are no operating procedures associated with the DN965X, this chapter shows you how to create a MADI split. Using a MADI module as a MADI split One of the features of the MADI card is th at it allows you to create a MADI split. This is because the MADI card has both [...]

Chapter 6: Operation DN9650/DN9652 Network Bridge 26 Operator Manual[...]

DN9650/DN9652 Network Bridge Operator Manual 27 Appendix A: Technical Specification This appendix contains the technical specifications specific to the DN9650 and DN9652 Network Bridges. Due to a policy of continual improvement, Kl ark Teknik reserves the right to alter the function or specification at any time without notice. Table 4: DN9650 techn[...]

Appendix A: Tec hnical Specification DN9650/DN9652 Network Bridge 28 Operator Manual[...]

DN9650/DN9652 Network Bridge Operator Manual 29 Appendix B: Functional Block Diagrams This appendix contains the signal flow diagrams for the DN9650/DN9652 Ne twork Bridges.[...]

Appendix B: Fu nctional Block Diagrams DN9650/DN9652 Network Bridge 30 Operator Manual DN9650[...]

DN9652 DN9650/DN9652 Network Bridge Operator Manual 31 DN9652[...]

Appendix B: Fu nctional Block Diagrams DN9650/DN9652 Network Bridge 32 Operator Manual[...]

DN9650/DN9652 Network Bridge Operator Manual 33 Appendix C: Service Information This appendix contains routine service and maintenance instructions. Restoring the factory defaults You can reset the DN965X unit to its factory default settings by pressing the RESET button on the rear panel of the unit (see Figure 1, “Rear panel of the DN965X,” on[...]

Checking/replacing the mains fuse DN9650/DN9652 Network Bridge 34 Operator Manual Checking/replacing the mains fuse The equipment must be independently is olated from the mains voltage supply before any attempt is made to change the protective fuse. The fuse and its cover must always be replaced before the eq uipment is reconnected to the mains vol[...]

Thank you for reading through this Operator Manual. We hope you found it useful. Please feel free to send us your comments. Our contact details and website address can be found at the front of this manual.[...]

Midas Klark T eknik Limited Klark Industrial Park , W alter Nash Road, Kidderminster . Worcesters hire. DY11 7HJ. England. T el: +44 1562 74151 5, F ax: +44 1562 745371 Email: info@midasklarkte knik.com W ebsite: www .klarkteknik.com © 2011 Red Chip Co mpany Ltd.[...]