Kenwood DPF-3030 инструкция обслуживания

CD PLA YER B60-4517-08 (EN) INSTRUCTION MANUAL KENW OOD CORPORA TION DPF-3030[...]

2 Before applying power Caution : Read this section carefully to ensure safe operation. Units are designed for operation as follows. Europe and U.K. ..................................................................... A C 230 V only The marking is located on the rear panel and says that the compo- nent uses laser beams that have been classified as[...]

3 Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay. Only the consignee[...]

4 Caution : Read this page carefully to ensure safe operation. IMPORT ANT SAFEGUARDS 10. Cleaning – Unplug this appliance from the wall outlet before cleaning. Do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. Use a clean dry cloth. 1 1 . Lightning – For added protection for this appli[...]

5[...]

6 System connections Caution: Do not plug in the power lead until all connections are com- pleted. Malfunction of microcomputer If operation is not possible or erroneous display appears even though all connections hav e been made pr oper ly , r eset the microcomputer referring to “In case of difficulty”. ™ Make connections as sho wn below . W[...]

7 Adjusting the output levels of the output jacks and headphone output The OUTPUT level (UP/DOWN) keys of the remote control unit can adjust the output levels from the LINE/OUT jacks and PHONES jack of the unit. T o use the headphone Connect a stereo headphone to the PHONES jack of the CD player. Adjust the sound volume using the remote control uni[...]

8 SYSTEM CONTROL OPERA TIONS Remote Control Lets y ou operate this unit with the system remote control unit supplied with the amplifier or receiver . Automatic Operation Automatically switches the input selector on the amplifier or receiver when you start playback from this unit. Synchronized Recording Lets you synchronize recording with the start [...]

9 Maintenance Be specially cautious against condensation in a following circumstance: When this unit is carried from a place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc. Caution on condensation Condensation (of dew) may occur inside the unit when there is a great dif[...]

10 TRACK EDIT CCRS TRACK NO. P.C. TOTAL TIME SINGLE TIME 6 1 11 16 7 2 12 17 8 3 13 18 9 4 14 19 10 5 15 20 PGM REPEAT 8 _ : 8 88 8 8 POWER - ON – OFF PHONES P.MODE EDIT CHECK CLEAR PEAK SEARCH TIME DISPLAY OPEN/CLOSE 123 456 789 0+ 1 0 REPEAT 24 bit D.R.I.V.E. II RANDOM 0 76 4¢  1¡  1 90 ! @ # $ % ^ & * 23 4 5 6 7 8 Controls and indi[...]

11 Operation of remote control unit 1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones. 3. Malfunction may occur if direct sunlight or the light of a high-frequency l[...]

12 Normal play (TRACK mode) 2 Load a disc. 3 Start playback. 1 Open the tray. Use the following procedure to play a CD in the original order of tracks from track No. 1. : Keys and control used in the operations described on this page. 3 Close the tray. Playing tracks in order from track No. 1 ÷ Playback starts when a disc has been loaded. T o paus[...]

13 Playback from desired track Press the numeric keys as shown below.... To enter track No. 23 : 003 To enter track No. 40 : 0000) ÷ Playback starts from the selected track and continues on the subse- quent tracks. Skipping tracks ÷ The track in the direction of the pressed key is skipped, and the selected track will be played from the beginning.[...]

14 Programmed play (PGM mode) Use the following procedure to program desired tracks in a desired order. (up to 20 tracks) ÷ Load a disc in the CD player. @ Press so that the “PGM” indicator lights. Program desired tracks. 1 2 Preparation : Keys and control used in the operations described on this page. ÷ The programmed contents remain in memo[...]

15 ÷ When a track No. is selected, the track will be added to the end of the existing program. Press to clear tracks from the end. T o check or change the programmed tracks T o clear tracks from the program 1 Pr ess the CHECK ke y . Press until the track No. to be changed is displayed. 2 Select the new track No. Auto space function During programm[...]

16 Repeated playback T o repeat only the programmed tracks : Keys and control used in the operations described on this page. ™ Preparation T o cancel repeated playback Press the REPEA T k ey ag ain. Lights up. 1 Press so that the "PGM" indicator lights. 2 Select the desired track No. Press the numeric keys as shown below... To enter tra[...]

17 T o repeat the entire disc 1 Press so that the “TRACK” indicator lights. 2 Switch REPEAT ON. 3 Start playback. T o cancel repeated playback Press the REPEA T k ey again. : Keys and control used in the operations described on this page. Goes off. Lights up. Lights up. 123 456 789 0+ 1 0 0 76 4¢  1¡  0 0 0 0 REPEAT 6 REPEAT P.MODE TRAC[...]

18 The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Editing Preparation : Keys and control used in the operations described on this page. Press the numeric keys as shown below. 30-minute tape : 000) 46-minute tape : 00006 1 Light the “EDIT”[...]

19 : Keys and control used in the operations described on this page. Press any one of these keys. ÷ The edited data is cleared entirely. T o clear the edited contents ÷ When the CHECK key is pressed, track numbers and remaining time in the file A are displayed first, then those in the file B. ÷ The "P.C." indicator goes off in a few se[...]

20 Playback in a random order (Random playback) ÷ Pressing the 4 key once returns to the beginning of the track being played. ÷ Press the RANDOM key to start normal playback. ™ As tracks are selected at random, you can enjoy listening to for a long time. ÷ Load a disc in the CD player. @ Preparation T o select another track in the middle of pl[...]

21 12 F 00 123 456 789 0 +10 0 76 4¢  1¡  T imer operations Timer playbac k of CD can be started at an y time using an audio timer which is available in audio stores. Preparation ÷ Connect the power cords of the associated components so that their power can be turned ON through the audio timer. (Also, be sure to read carefully the instruct[...]

22 ÷ Insert the power plug firmly to the AC outlet. ÷ Turn the amplifier’s power ON. ÷ Load the disc again with its label side up. ÷ Insert the disc properly . ÷ Wipe off the dust on the surface of the disc referring to “Disc handling precautions”. 9 ÷ Replace the disc with a new one. ÷ Leave the player for about 1 hour so that the con[...]

23 Specifications [ Format ] System ..................................................................................... Compact disc digital audio system Laser ................................................................................................................ Semiconduc tor laser [ D/A Conv ertors ] D/A Conversion ...................[...]

For your records Record the serial number , f ound on the back of the unit, in the spaces designated on the war ranty card, and in the space provided below . R ef er to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model Serial Number[...]