JVC NX-DV3 инструкция обслуживания

COMP ACT COMPONENT MD SYSTEM NX-DV3 Consist s of CA-NXDV3 and SP-NXDV3 INSTRUCTIONS L VT125 6-002A [UJ] NX-DV3[UJ]-01.fm Pa ge 1 Tuesday, Decemb er 28, 2004 11:05 AM[...]

G-1 Introd uction W arnings, Cautions and Others IMPORTANT FOR LASER PRODUCTS CAUTION T o reduce the risk of electr ical shocks , fire, etc.: 1. Do not remov e screws, cov ers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION — F button! Disconnect the mains plu g to shut the power off completely (the ST ANDBY lamp goes off[...]

G-2 CAUTION — Proper V entilation T o avoid risk of electric shock and fire and to prot ect from damage, locate the apparatus as follows: T op/Front/Back/Sides: No obstructions should be plac ed in the areas shown by the dimen sions below . Bottom: Place on the level surfa ce. Maintain adequate air path for ventilation by placing on a stand with [...]

1 T able of Content s marks refer to operation used frequently . Y ou can quickly learn the general usage of this product by reading those parts only . Notes on Operation ............................. 3 Suitable Locations f or the Main Unit ............ ..... 3 Condensation ................ .............. ................ ...... 3 Cleaning the Main[...]

2 Playing Back MP3/WMA and JPEG Discs ..................................................37 Playback .... ............. ............. ............. ................ 37 Repeat Playback. ................... ..................... ...... 38 Setting and Adjusting Surround Mode .. 39 Selecting the Surround Mode ........ ................... 39 Adjust the V[...]

Introducti on 3 Introduction Notes on Operation T o minimize the need for servicing and maintain the high quality of this product, do not place the main unit in the following locations: • In a position subje ct to high humidity or consid- erable dust • On an uneven or unstable surface • Near a heat source • Near a comp uter , fluorescent li[...]

4 This product has b een designed to p lay back the following discs: DVD VIDEO, DVD AUDIO, VCD, SVCD, CD This product can also play back the following discs: • F inalized DVD-R/RW discs recorded in the DVD VIDEO format. • CD-R/RW discs recorded in the following for- mats - Music CDs (finalized discs) - VCDs - SVCDs - MP3/WMA/JPEG discs recorded[...]

Introducti on 5 (Continued) Notes on Operatio n About MP3/ WMA/JPEG discs Playable MP3/WMA/J PEG discs and files • Discs recorded in the ISO 9660 format are play- able (except discs recorded in the "packet write" format (UDF format)). • Discs recorded in the multi-session format are also playable. • Files with an extension of "[...]

6 Regarding TV mo de This product is suitable for NTSC. The discs usi ng TV mode other than NTSC (such as P AL) is converted into NTSC mode before playback. NOTE • Some discs may not be played properly , for exam- ple, the picture movement may not be smooth, or the aspect ratio (ratio of length and width) may be changed. About the Color System NX[...]

Introducti on 7 S pecial Cautions ■ Important cau tions Installation of the system • S elect a place which is le vel, dry and neither too hot nor too cold; betwe en 5 ° C and 35 ° C. • Leave sufficient dist ance between the system and the TV . • Do not use the system in a place subject to vibration . Power cord • Do not handle the power[...]

8 Setting Up the Unit This products allows you to enjoy virtual surround sound using only the fo ur speakers in the front, as it is equipped with the 4-speaker front surround function (See Pattern 1 in the diagram below). In addition to 4-speaker front surround, Pattern 2 and Pattern 3 are available. ■ Pattern 1 1 As shown in the diagram, place o[...]

Introducti on 9 (Continued) Setting Up the Unit ■ Pattern 2 1 As shown in the diagram, det ach the foot seals (supplied) from the backing. 2 Att ach four foot seals to the bottom of each surround speaker . ■ Pattern 3 • Place the surrou nd speakers slightly behind the listening point. In this case, change the surround speake r cord to the 10 [...]

10 NOTE • When placing the surround speaker on a stand, such as a speaker stand, attach the foot seals to the surround speakers, depending on the way the speakers are placed ( page 9 ). • When mou nting the surround speakers on the wall, pay attention to the following: • Obtain screws that are strong enough to mount the speakers to the wall. [...]

Introducti on 11 Introcution/ Preparation Part Description * This terminal is for connecting a pair of headphones equipped with a stereo mi ni plug (not supp lied). While the headphones are connected, the speakers do n ot produce any sound. The numbers refer to the pages in which the parts are explained. 69 65-68 52 22 20 31, 32 31 24, 45, 48 52-54[...]

12 Preparation Remote Control CAUTION • Do not use a use d battery and a new battery together . • Do not use different typ es of batteries at the same time. • T ake out the batteries if the remote control is not to be used for a long time. Otherwise it may cause a leakage. • When operating the remote control, point it at the front panel of [...]

Introducti on 13 (Continued) Remote Control 1 Slide the remote control mode selector to the TV side. 2 Hold down . NOTE • Hold down until step 4 is completed. 3 Press and release. 4 Press number buttons (1-9, 0). Examples: For a Hitachi TV : Press 1, then 0. For a T oshiba TV: Press 0, then 8. If there are two or more manufacturer's co des, [...]

14 Connections 1 Set up the AM antenna (supplied). 2 Connect the antenna cord. 3 T urn the AM loop antenna to find the best position for radio reception. Place the AM loop antenna as far from the main unit as possible. • Do not place the AM loop antenna on a metallic table or close to a TV , computer , or other electric appliances. Doing so may a[...]

Introducti on 15 (Continued) Connections CAUTION • Do not sh ort-circuit the and speaker termi- nals. Doing so may damage the speakers. • Do not co nnect other speakers together with the supplied speakers. The change in impedance may damage the main unit and the speakers. • The sp eakers of this pr oduct are magnetically shielded, but color i[...]

16 CAUTION • Before co nnecting other equipment, turn off both the main unit and the equipment. CAUTION • For details of signals to be output, refer to page 42. Connecting Other Equipment Read this section when connecting other audio equipment to this product. Other audio equipment Audio cord (not supplied) Main unit (rear view) Connecting with[...]

Introducti on 17 (Continued) Connections CAUTION • Connect t he main unit directly with a TV (o r a monitor) without routing through a VCR. Otherw ise it may cause picture dist ortion while playing back. (Such picture distortion is caused by a copy protection system, and thus it is not a malfunction.) Also, if the main unit is connected to a TV w[...]

18 NOTE • When you connect a sub-woofer to the system, set "SUB WFR" to "ON" in "Other Settings" ( page 40). • After making all other necessary connections, connect in th e power plug. • When you insert the p ower cord to a plug socket, ST ANDBY/ON lamp on the main unit is turned on. NOTE • The preset setting s[...]

Introducti on 19 Basic Ope rations Basic Operations This manual explains th e operations assuming that you will use the remote control. Some buttons on the main unit ar e the same as those on the remote control. Y ou can use either button in this case. CAUTION • Set the remote contr ol mode selector to AUDIO before using the number buttons. Y ou [...]

20 Press (or on the main unit). • With the power o ff, pressing either button also turns on the main unit. The function assigned to the b utton starts working at the same time. Remote control: Main unit: NOTE • Cooling fan is built into the main unit for emitting generated heat. The internal cooling fan automati- cally rotates and stops. Press [...]

Introducti on 21 (Continued) Basic Operations Press . • Each time you pre ss , the display tog- gles as follows. NOTE • When the main unit is turned off, the display toggles between "DISPLA Y OFF " and "DISPLA Y ON" For the locations of remote control buttons, refer t o page 19. Changing the Brightness of the Display Window [...]

22 Basic Opera tions/Listening to Radio Broadcasts Listening to Radio Broadcast s This product can receive FM and AM radio broad- casts. CAUTION • Set the remote contr ol mode selector to AUDIO before using the number buttons. Some countries space AM stations 9 kHz ap art, and other countries use 10 kHz spacing. On the main unit ONL Y : ■ When [...]

Introducti on 23 (Continued) Listening to Radio Broadcasts Y ou can store up to 30 FM radio stations and up to 15 AM radio stations. ■ While the broadcast from the radio station you want to preset is being received 1 Set the remote control mode selector to AUDIO. 2 Press . • "SET" flashes for approximately 5 seconds. 3 While "SET[...]

24 Listening to Radio Broadcasts/Listening to Discs Basic Operations of the DVD Player CAUTION • Set the remote contr ol mode selector to AUDIO before using the number buttons. (Refer to page 37 for playing back MP3/WMA and JPEG .) 1 Press (lef t) on the main unit. • The disc tray comes out. 2 Place a disc on the disc tray . • When you want t[...]

Introducti on 25 (Continued) Basic Operations of the DVD Player ■ Display for CD Display while a CD is being playe d back: Display while the CD is stopped: ■ Display for DVD AUDIO Display while a DVD AUDIO is being played back: Display whil e the DVD AUDIO is stopped: ■ Display for VCD/SVCD Display while a VCD/SVCD is being played back: • P[...]

26 Listen ing to Disc s Press . • Each time you press , the display tog- gles as follows. ■ While a disc is being played back or stopped ■ While a disc is being played back Press . NOTE • This operation may not be carried out for some discs. • Y ou cannot return to th e previous title. For the locations of remote control buttons, refer t [...]

Introducti on 27 (Continued) Basic Operations of the DVD Player ■ While a disc is being played back Press . When playback is stopped in the midd le, playback can be started from the stopped scene . How to suspend playback ■ While a disc is being played back Perform any of the following o perations during playback. * Even if the power is turned [...]

28 ■ While a disc is paused Press or . • Each time you press , the speed increases as shown below . • Press to p ause playback, and press to resume normal playback. NOTE • No sound will be produced. • The picture motion in the reverse direction may not be smooth. • For a VCD or SVCD, slow motion playback can be carried out in the forwar[...]

Introducti on 29 Listeni ng to Discs Convenient Functions of the DVD Player CAUTION • Set the remote contr ol mode selector to AUDIO before using the number buttons. ■ While a disc cont aining two or more audio is being played back 1 Press . Example: TV screen • Each time you pres s , the audio will be changed. T he audio can also be changed [...]

30 ■ While a disc cont aining two or more view angles is being played back 1 Press . Example: TV screen • Each time you press , the angle will be changed. The angle can also be changed by pressing . 2 W ait for a few seconds or press . NOTE • Y ou can also op erate this function by using the menu bar ( page 35). ■ While a disc is played bac[...]

Introducti on 31 (Continued) Convenient Functions of the DVD Player Example: 5 Press to change the value. 6 Press . • T o adjust other items, go back to step 3 . 7 Press . NOTE • If no operation is ma de for several seconds during the procedure, the settings made so far will be automatically stored. • "VFP" stands for "video fi[...]

32 There are some D VD AUDIO discs with still pi c- tures recorded. Among the still pictures, the re are pictures called B.S.P . (b rowsabl e still pictures). Y ou can change these pictur es as if turning over pages. • This operation can be carried out whe n "B.S.P ." is lit in the disp lay window on the main unit. ■ While a disc is b[...]

Introducti on 33 (Continued) Convenient Functions of the DVD Player 3 Press the number buttons ( - or ) to program chapters/tracks. ■ Display for DVD VIDEO • Select a title number , and the n select a chapter number . ■ Display for DVD AUDIO/MP3/WMA • Select a group number , and then select a track number . ■ Display for CD/VCD/SVCD • S[...]

34 Y ou can listen to tracks or chapters in random order . ■ While playback is stopped 1 Press repeatedly to select "RANDOM". Example: For CD • "RANDOM" appears in the TV screen. 2 Press . NOTE • Y ou can set tracks in rand om playback from either a disc or MD. • Pre ssing repeatedly doe s not return play- back to the pr[...]

Introducti on 35 S t atus Bar and Menu Bar Y ou can display the status bar and menu bar on the TV screen, and can control discs with the bars. CAUTION • Set the remote contr ol mode selector to AUDIO before using the number buttons. ■ While a disc is being played back 1 Press twice. • The above is an example for a DVD VIDEO. 2 Press to select[...]

36 ■ While a disc is being played back 1 Press twice. • The menu bar ( page 35) appears. 2 Press to select . 3 Press . 4 Press to select . 5 Press at the st arting point of the p art to be repeated (designat- ing A point). • The icon on the menu bar will be . 6 Press at the end of the p art to be repeated (designating B point). • The icon o[...]

Introducti on 37 Playing Back MP3/WMA and JPEG Discs CAUTION • Set the remote contr ol mode selector to AUDIO before using the number buttons. Display of an MP3/WMA di sc is described here as an example. For a JPEG disc, read "track" as "file". NOTE • When playing back a disc containing both MP3/ WMA and JPEG files, set one [...]

38 4 Press to select a track. 5 Press or . Example: Display du ring playback • At first, a track title (file name) is scrolled. • When an MP3 or WMA is loaded, tag information (title/artist/album) is scr olled followed by a track title. • Only alphanumerical one-byte ch aracters are displayed properly as a track title or tag informa- tion. NO[...]

Introducti on 39 Setting and Adjusting Surround Mode ■ Multi-channels Surroun d Mode 1 Press repeatedly to select the surround mode. Each time you press , the display toggles as follows. ■ When the spea ker position is "F1" or "F2 " ( page 8-10) ■ When the speaker position is "R" ( page 9,10), and stere o sound s[...]

40 1 Press and to select "SURR" (Surround S peaker) or "SUBWFR" (Sub-woofer). 2 Select or to adjust the volume. Adjust the volume between -6 to +6. • It will return to sound source display in a few seconds. NOTE • When the speaker position is "R", adjust the vol- ume of the left "SURR L" surround speaker [...]

Introducti on 41 Preferences Y ou can change the initial settings of this product according to the environment the product is used in. CAUTION • Set the remote contr ol mode selector to AUDIO before using the number buttons. NOTE • The top and b ottom of the preference screen may not be displayed on a wide TV . Adjust the picture size on the TV[...]

42 *1 While the speaker positi on is "R" ( page 9, 10), the speaker setting icon is display ed in the initial setti ng screen, allowing you to set it. It is not displayed at other times. AUDIO Items Content s ( : initial setting) DIGIT AL AUDIO OUTPUT Select an output si gnal type from the following in accordance with t he equipment conne[...]

Introducti on 43 (Continued) Preferences Language Codes OTHERS Items Content s ( : initial setting) RESUME ( page 27) ON SCREEN GUIDE Select whether you display guide icons on the on-screen guide indicating stat us of a disc/ main unit. (For det ails on the guide icons, refer to page 26.) A V COMPU LINK MODE When you want to control JVC TV by using[...]

44 Country/Area Codes NX-DV3[UJ].book 44 ページ ２００４ 年１２月２８日　 火曜日　午後２ 時３７分[...]

Introducti on 45 Listening to O t her Equipment/Liste n in g to MDs Listening to MDs CAUTION • Set the remote contr ol mode selector to AUDIO before using the number buttons. ■ When the main unit i s turned on 1 Insert an MD. CAUTION • Do not insert an MD wh ile th e main unit is tur ned off. Forcibl y insert ing an MD may damage the mai n un[...]

46 Listening to MDs Press . • Each time you press , the display tog- gles as follows. ■ While an MD is being played back ■ While an MD is stopped NOTE • While an MD is selected as the sound source , when you insert an MD to which nothing has been recorded, "BLANK DISC" appears. There are two me thods. ■ While an MD is being play[...]

Introducti on 47 (Continued) Listening to MDs Y ou can play back just the tracks from a group which you want to listen to. ■ While an MD is stopped 1 Press repeatedly to select "GROUP". 2 Press . • Group 1 playback start s. • If there is no group, "GR" disappears and normal playback starts. 3 Press or to select a group. ?[...]

48 Listening to MDs This function allows you to listen to tracks in ran- dom order . ■ While an MD is stopped 1 Press repeatedly to select "RANDOM". 2 Press . NOTE • Y ou can set tracks for random playback either from a CD, MD or DVD. • Pressing repeatedly does not return play- back to the previous track. • Each track is played ba[...]

Introducti on 49 (Continued) Listening to MDs 4 Enter the title you want to search. • Enter the first one to five characters of the title. Example: Entering "F" searches ti tles starting with "F" in order of track number . Entering "Frien" search es titles starting with "Frien" in order of track number . ?[...]

50 Listening to MDs/Listening to Other Equipment Listening to Other Equipment 1 Press . • Each time you press , the display tog- gles as follows. 2 St art other equipment playback. • Refer to the operation manual for the con- nected equipment. 3 Adjust the volume and make other necessary settings. • For adjusting the volume and making oth er [...]

Introducti on 51 Recording Sound Recording Sound to MDs • It may be unlawful to record o r playback copyright material with out the consent of the copyright owner . • Long Time S tereo Playback (MDLP) can be utilized on this unit. This allows you to record original stereo sound for two times or four times longer than the designate d period of t[...]

52 1 Press , and then press . • The DVD is sele cted as the sound source and playba ck is stopped . ■ When recording so und from DVD VIDEOs • Play back a title or chapter , pause playback, and then press to return to the begin- ning of the first title/ch apter . • Y ou may not be able to record a DVD VIDEO depending on the disc. 2 Insert an[...]

Introducti on 53 (Continued) Recording Sound to MDs (Excluding DVD VIDEOs) Before proceeding to step 6, st art playback of the track you want to record. • Pressing in step 6 returns playback to the beginning of the track, and only that track is recorded. • This one-track record ing is not avai lable for DVD VIDEOs. ■ When recording CDs/VCDs/S[...]

54 1 Select a sound source. 2 Insert an MD for recording. • Confirm the MDLP , "LP: " indicator and group recording setting s. ( pages 51 and 52) • Close the write protect knob on the MD ( page 72). 3 Hold down on the main unit for approximately 4 seconds to dis- play the track mark options. 4 While the track mark options are displaye[...]

Introducti on 55 Recording Sound/Editing MDs Giving (Editing) T itles • Y ou cannot edit an MD while its write protect knob is open ( page 72). When you attempt to edit a protected MD, "DISC PROTECTED" appears. • When you finish editing, "EDITING" appears, then "WRITING" flashes an d the edited settin g is recorded[...]

56 Editing MDs 6 Press (right) on the main unit to eject the MD. NOTE • Number of cha racters that can be entered to an MD Y ou can enter up to 1792 characters to each MD, with up to 61 characters to each track. However, the actual number of characters that you can enter is less than the number indicated here because of restrictions of the MD wri[...]

Introducti on 57 Editing MDs Editing T racks Example: Dividing a tune into tune A and tune B ■ While the track you want to divide is being played b ack 1 Press repeatedly to select "DIVIDE?". 2 Press . • Y ou can also select the track number with , or the number buttons. Refer to "Using the number buttons" ( page 19). 3 Pres[...]

58 Y ou can join two adjacent tracks into one track. Example: Joining tune A and tune B ■ While the second tr ack (track 2 in the exam- ple shown above) to which you want to join the first track is being played back 1 Press repeatedly to select "JOIN?". 2 Press . • Y ou can al so select a track number with , or the number buttons. Ref[...]

Introducti on 59 (Continued) Editing T racks Example: Eras ing tune B CAUTION • Once you erase a track, you cannot retrieve it. Before erasing a track, confirm that you no longer need it. ■ While the track you want to erase (tra ck 2 in the example shown above) is being played back 1 Press repeatedly to select "ERASE?". 2 Press . • [...]

60 Editing T racks by Group Y ou can sort tracks into 99 groups maximum. Y ou can group tracks to gether . A sequence of tracks that is not register ed in any group can be grouped. Example: Formi ng tune A, tune B and tune C into a group ■ While the track which you want to specify as the first in the group (track 1 in the exam- ple shown above) i[...]

Introducti on 61 (Continued) Editing T racks by Group Y ou can add a track to the specified group as the last track of the group. Example: Adding tune F to group 1 ■ While the track which you want to add to a group (track 6 in the ex ample shown above) is being playeds back 1 Press repeatedly to select "ENTR Y GROUP?". 2 Press . • Y o[...]

62 Y ou can join two adjacent groups. Example: Join ing group 1 and group 2 ■ While the track in t he second group to which you want to join the first group (group 2 in the ex ample show n above) is being played b ack 1 Press repeatedly to select "JOIN GROUP?". 2 Press . • T wo ad jacent group numbers appear . • Y ou can also select[...]

Introducti on 63 (Continued) Editing T racks by Group Example: Can celing group 1 ■ While a track in the group you want to can- cel (group 1 in the exam ple shown ab ove) is being played back 1 Press repeatedly to select "UNGROUP?". 2 Press . Example: Whe n you want to cancel group 1 • Y ou can also select a group number w ith or . 3 [...]

64 Y ou can erase a group including all tracks in the group. Example: Erasi ng group 2 CAUTION • Once you erase a track, you cannot retrieve it. Before erasing a track, confirm that you no longer need it. ■ While a track in the group you want to erase (group 2 in the example sh own above) is being played back 1 Press repeatedly to select "[...]

Introducti on 65 Editing MDs/Convenient Functions Using the T imers CAUTION • Set the remote contr ol mode selector to AUDIO before using the number buttons. When the specifie d time passes, the main uni t automatically turns off. Press . • Each time you press , the time display (in minutes) toggles as follows. Example: Display while the sleep [...]

66 Convenient Functions Y ou can use the recording timer function to record FM/AM broadcasts or sound from other equipment to an MD. This operates only once after it has been set. NOTE • Timer settings remain unchanged until the timer is replaced by new setting. 1 Prep are to record. 2 Press twice to go to the st art time setting display for REC [...]

Introducti on 67 Convenient Functions (Continued) Using the T imers Press once to display "REC TIMER" and then press . In the display window , and "REC" will have disappeared. When REC Timer is finished, these displays will also disappear . The settings for REC Timer are recorded in the memory . Pre ss once to display "REC [...]

68 4 Press or to select the sound source you want to play back. Example: When you want to listen to an FM broadcast • When you want to listen to so und from other equipment, you cannot use the playback timer function to start playback on any equipment other than this product. • Y ou cannot use the p layback timer functi on together with program[...]

Introducti on 69 Auto S t andby If no sound is produced for 3 minutes when a sound source other tha n the FM/AM radio is selected, the main unit automatically turns off. ■ When a sound sour ce other than the FM/ AM radio is selected Press . While a disc or MD is being played back or recorded: When playback or recordin g finishes, auto standby sta[...]

70 Using A V COMPU LINK The JVC A V COMPU LINK system allows you to enjoy video or audio with the simplest o peration. If your JVC TV set supports the JVC A V COMPU LINK system, simply st ar ting the main unit will automatically make all ne cessary settings on the TV to allow you to enjoy the playback. • Carefully read manuals of equipment to be [...]

Introducti on 71 Convenient Fu nctions/Reference Restrictions on MDs Because the MD recording method has some restrict ions, the following phenomena may occur . The phenom- ena are not a malfunction of this product. The Serial Copy Management System protects copyright and allows only first-gene ration digital copies from the digitally recordable so[...]

72 Referen ce Handling Discs/MDs • Do not put adhesive tape or stickers, or write on a disc. • Do not bend a disc. • Be sure not to use heart/flower shaped discs or other irregularly shaped discs. Th e use of such discs damages the ma in unit. • Be sure not to use thinners, benzenes, cleaners for analog records, or other chemical agents. ?[...]

Introducti on 73 Reference MD/Disc Messages MD message Meaning Possible solution CANNOT ENTRY! The track has already been in the selected group. Select an appropriate track. ( page 61) CANNOT FORM! There is a group between the selected tracks. Select appropriate tracks. ( page 60) CANNOT GROUP! There is no space for storing more group information. [...]

74 T roubleshooting ● If this product does not function properly even af ter you have implemented the possible solutions given above Many functions of this product are implemented by microcomputers. If malfunction is caused by thunder or static electricity , or the main unit does not function properly even when you press a button, disconnect the [...]

Introducti on 75 FA Q ■ About Disc Q: Can I play DVD videos or video CDs I purchased in foreig n countries? A: If the region number (local number) includ es "ALL" or "1", and the video format is NTSC, you can play DVD videos. About vid eo CDs, if the video format is NTSC, you can do it. Check the cover of your disc. Q: Is it p[...]

76 Glossary B.S.P . S tatic pictures f rom DVD audios may include not only the pictures di splayed automatically tog ether with the audio playback, but als o the pictures that can be optionally select ed by users. These pictures are called B.S.P (Browsable S till Picture). Component This is one of the vide o signals and refers to the signal of th e[...]

Introducti on 77 S pecifications ■ MD/DVD receiver (CA-NXDV3) Amplifier Output power Front: 30 W + 30 W at 4 Ω (10% THD) Surround: 30 W + 30 W at 4 Ω (10% THD) Input terminal s <Analog> AUX×1, 500 mV/47 k Ω <Digit al> Digital optical inp ut × 2 -23 dBm to -15 dBm (Optic al square ter minal) (Compatible with frequency of 32 kHz[...]

78 ■ S peaker Front (SP-NXDV3F) System 2 -way bass refl ex type, Magnetic ally shi elded ty pe S peakers Woofer : 10 cm × 1 T weeter : 4 cm × 1 Power handlin g 30 W capac ity Impedance 4 Ω Frequency range 56 Hz - 40 kHz Sound pressure 85 dB/W•m level Dimensions 125 mm (W) × 251 mm (H) × 188 mm (D) Mass (approx.) 2.1 kg (1 unit) Center/sur[...]

0105KMMMODJEM NX-DV3 COMP ACT  COMPONENT  MD  SYSTEM 2005  Victor  Company  of  Japan,  Limited EN c NX-DV3[UJ]-BackCov.f m Page 42 Tuesday, December 28, 2004 11 :06 AM[...]