JVC LST0420-001B инструкция обслуживания

DOME CAMERA TK-C215V4 TK-C215V12 INSTR UCTIONS (A) For Customer Use: Enter below the Se rial No. which is located on the body . Retain this inf ormation for future referen ce. Model No . TK-C215V4/TK-C215V12 Serial No. * TK-C215V4 is used in the above illustration. LST0420-001B TK-C215V4_V12_EN.boo k Page 1 Wednes day, August 2, 2006 1:18 PM[...]

2 Intr oduction Safety Precautions CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION FOR USA AND CANADA Information for Users on Disposal of Old Equipment Attention: This symbol is only valid in the [...]

3 I 䢇 The unit is to be powered by a DC 12 V or an AC 24 V po wer supply . 䢇 The unit is to be powered by a UL Listed DC 12 V or an AC 24 V po wer supply . 䢇 The AC 24 V and 12 V DC power supply shall conform to the f ollowing: Class 2 only . 䢇 This installation should be made by a qu alified service person and should conform to all local c[...]

4 Intr oduction These are general IMPORT ANT SAFEGU ARDS and certain items may not apply to all appliances. 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not u[...]

5 Intr oduction Safety P recautions ......................................... 2 Contents ......................................................... 5 Characteristics ............................................... 6 Operating Precautions ................................... 7 Name of P ar ts ........................................ ........ 8 Camera.[...]

6 Intr oduction Thank you f or purchasing this product. (These instructions are for: TK-C215V4U/TK-C215V12U.) Before beginning to oper ate this unit, please read the instruction manual carefully in order to make sure that the best possible perf or mance is obtained. 䡵 Realizing a Hi gh Picture Quality This camera realizes 540 TV lines and S/N50 d[...]

7 䢇 T o sav e energy , when it is not being used turn the system’ s power off. 䢇 This camera has been designed f or indoor use. It cannot be used outdoors. 䢇 Do not install or use the camera in the follo wing places. ● In a place exposed to rain or moisture . ● In a place with v apor or oil soot, f or example in a kitchen. ● In a temp[...]

8 Intr oduction Camera A Mounting hole (elliptica l) x 4 Use these when mounting the camera to the electrical box. ( A pg. 22) B Mounting h ole (rou nd) x 4 Use these when mounting the camera to the ceiling or wall. ( A pg. 18, 20) C Outer Case Use this in the follo wing cases: ● When mounting the camera directly to the ceiling or on the wall. ( [...]

9 Camera (Interior) The dome cov er , inner dome and outer case are removed. Procedures for remo val. ( A pg. 18 A Embedding the camera to the ceiling B , Step 3. to Step 5. ) K Strap A plate to connect the camera unit and the dome cov er . L Fastening Screw (x 3) When embedding the camera in the ceiling, turn this screw to secure the camera. This [...]

10 Intr oduction Set the video setting switches on the camer a unit before mounting it. T o set the switches, use a fine-tipped scre wdr iver . A [RESET/SPO T] RESET/SPO T button When this button is pressed, the v alue of the white balance or phase adjusted manually is reset to the default v alue. ● When the 2 [SELECT] switch is set to WHT .BAL.,[...]

11 4. [WHT .BAL.] A TW/MANU AL selection switch. For selecting whether to adjust the white balance automatically or manually . When the setting is changed from manual to A TW , the settin g values in the manual mode will be reset. The camera s witches to the same mode as with pressing the [RESET] button. (Default setting: A TW) NO TE: ● The white[...]

12 Intr oduction Set the video setting switches on the camer a unit before mounting it. T o set the switches , use a fine-tipped screwdriver . A [IRIS LEVEL] Iris level adjustment For adjusting the le vel of the automatic aper ture control lens. This adjustment only needs to be made when required. Use t his to accommodate par ticular shooting condi[...]

13 2. [SELECT] WHT .BAL./PHASE setting switch. WHT .B AL.: The F [R/B, +/ - ] b uttons are used as [R/B] adjustment buttons . PHASE: The F [R/B, +/ - ] b uttons are used as [+/ - ] adjustment buttons . (Default setting: WHT .BAL.) 3. [SYNC] Synchr onization system selection swit ch. This switch sets the synchronizing system f or the camera. INT : T[...]

14 Installati on and connection The maximum connection distance varies with the type of cable used. Please refer carefully to the table f or each cable during conn ection. * Be sure to turn off th e power of de vices before connecting cables. Video signal cables Connect the coaxial cables (BNC) to the video signal output connector (BNC). DC 12 V or[...]

15 Electrical Spe cifications of Alarm In put T erminals (TK-C215V12 only) ● T o prevent penetr ation of noise in the internal circuitry , apply a non-voltage contact signal to the ALARM input terminal. N ev er apply a voltage . ● Apply an alarm signal for at least 200 ms. If it is shor ter , it is not guaranteed that the signal will be recogni[...]

16 Installati on and connection NO TE: ● T ur n OFF the power supply to all equipment to be used before making connections . ● Read the Instruct ion Manual f or each piece of equipment to be used before making connections. NO TE: ● P ower consumption of TK-C215V4/TK- C215V12 are different from one another . When installing a mixture of these [...]

17 Getting Started CA UTION: ● When mounting the camera to the ceiling, ensure to wear saf ety glasses to protect the eye from any f alling object. ● Attachment of a embedded cover in the ceiling (recess brack et) may be mandatory in cer tain regions. If this is so , ensure that the embedded cov er (recess brack et) is securely attached before [...]

18 Installati on and connection Embedding the camer a to the ceilin g * Make use of a ceiling material with a thickness between 9.5 mm to 22 mm. 䡵 Setup 1. Open a hole in the ceiling. ( R 120 mm , 4 3/4 inches) 2. Draw the fall pre vention wire mounted to the ceiling slab and the cable ou t from the ceiling in adv ance . CA UTION: ● Select a su[...]

19 䡵 Connecting 1. Attach the fall prevention wire to th e camera, followed b y attaching it to the ceiling slab (Fall prevention wire is not included.) 2. Connect the video signal cab le . ( A pg. 14) Lower the co ver and connect the connectors . Upon connecting, cover the connectors using the protection cover . 3. Connect the input po wer suppl[...]

20 Installati on and connection When mounting the camera directly to the ceiling or on th e wall When mounting to a wall, replace areas in dicated as “ceiling” in the procedures by “wall”. 䡵 Setup 1. Open a hole in the ceiling. ( R 30 mm , 1 1/8 inches) Make us e of the template sup plied to open a ho le. 2. Draw the fall pre vention wire[...]

21 4. Connect the video signal cab le . ( A pg. 14) Lower the protection co ver and connect the connectors. Upon connecting, restore the protection cov er to cover the connectors . 5. Connect the input po wer supply cab le . ( A pg. 16) 6. Connect the alarm cable.(TK-C215V12 onl y) ( A pg. 15) 7. Wrap insulation ta pe around cables. 䡵 Mounting 1.[...]

22 Installati on and connection When mounting t h e camera to the electrical box NO TE: Before mounting the camer a to electrical boxes , please ref er to local building codes for bo x type to use for lo w-voltage wiring. 䡵 Connecting 1. Align j with the shootin g direction when mounting the cover to the electrical box. 2. Follow steps 2 to 7 of [...]

23 Adjusting Im age Upon mounting the camera, adjust the images while checking the actual image. Mounting the test monitor Connect the [MONITOR] terminal of this camera to a test monitor to adjust the camera’s shooting direction, image and fo cus. * The power to the camera body must be ON when adjustments are performed. Adjusting the camera direc[...]

24 Adjusting Im age Adjusting the field angle/focus/ brightness Upon deter mining the imaging direction, adjust the field angle, f ocus and iris lev el accordingly . The method of adjustment v ar ies with the camera in use.  TK-C215V4 ( A pg. 24)  TK-C215V12 ( A pg. 25) 䡵 TK-C215V4 Adjusting field angle Loosen the fastening scre w for the z[...]

25 䡵 TK-C215V12 ● 2 types of angle of view ma y be selected for TK-C215V12. In general, set in a wa y such that the home position shoots a wide range and the alar m position a narrow range. ● Use the alarm input mode selection switch to set the actions when there is an alar m input. ( A pg. 13) CA UTION: ● When setting images on TK-C215V12,[...]

26 Adjusting Im age 䡵 TK-C215V12 (continued)  Registering alarm po sition For registering the angle of view during monitoring when there is an alar m input. 1. Check that the [ALARM POSITION] indicator light is turned o n. Registration of alarm position is enabled. ● Press the [POSITION SELECT] button if the [ALARM POSITION] indicator light [...]

27 Other install ation and adjustment After setting is complete, mount the Inner dome. 1. Mount the inner dome . Mount the inner dome to th e claws (3 locations). CA UTION: ● Mount the inner dome such that it doe s not cov er the lens. ● When mounting the inner dom e, be careful not to mov e the lens position. The image angle set previously wil[...]

28 Other install ation and adjustment As a general characteristic unique to CCDs, white-spots may appear on the screen with age. In order to reduce this phenomenon, this unit is equipped with a white-spot correction feature. Switch on the camera pow er supply and wait for at least 30 minutes.  TK-C215V4  TK-C215V12 1. Remove the dome cover . [...]

29 Other s 䡵 Camera Signal system : Based on NTSC standard Scanning frequencies : 15.734 kHz (Hor izontal), 59.94 Hz (V er tical) Image device: 1/4" IT CCD Effective picture elements: : 380,000 pixels , 768 (H) x 494 (V) Sync system : Line lock/Internal Video S/N: 50 dB (AGC OFF , white 50 % output) Horizontal resolution: : 540 TV lines (Cen[...]

30 Other s 䡵 External Dimens ions [Unit: mm (inches)]  When cover is attached * Specifications and appearance of this unit and related products are subject to change for product improv ement without pr ior notice. Specifications (continued) R 145 (5-3/4) S R 55 (2-1/8) R 116 (4-9/16) 71 (2-13/16) 44 (1-3/4) 2 (1/12) SR55 (2 -1/ 8 ) 123 (4-7/8)[...]

31 Focus chart TK-C215V4_V12_EN.boo k Page 31 Wedne sday, August 2, 2006 1:18 PM[...]

© 2006 Victor Company of Japan, Limited LST0420 -001B TK-C215V4/TK-C215V12 DOME CAMERA TK-C215V4_V12_EN.boo k Page 32 Wedne sday, August 2, 2006 1:18 PM[...]