JVC HR-J267MS инструкция обслуживания

COLOUR SYSTEM STANDBY/ON TV PROG SP/LP/EP VIDEO AUDIO REVIEW SP H R-J267MS H R-J261MS VIDEO CASSETTE RECORDER INSTRUCTIONS LPT0285-001A PAL NTSC PROG. CHECK PROG. Press and hold TV button while pressing , TV PROG +/–, TV/VCR TV 12 3 4 0 /AUX 6 78 /DAILY 5 9 /WEEKLY TV/VCR CANCEL START REW FF PLAY REC MENU OK STOP TV PROG + TV PROG – TV VOL PAUS[...]

2 EN SAFETY FIRST IMPOR T ANT n Please read the various precautions on this page before installing or operating the recorder . n It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video record- ing, broadcast or cable programme and in any litera[...]

EN 3 Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in "Specifications" ( Z pg. 39). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have. RF CONNECTION ● T o Connect T o A TV With[...]

4 EN V ideo Channel Set INITIAL SETTINGS V ideo Channel (RF Output Channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable. If you have connected the video recorder to your TV via the provided RF cable only (RF connection) – Go to "With RF Connection" belo w . If you have [...]

EN 5 A (Ex.) If channel 50 is available in your area SET VIDEO CHANNEL 3 Set your TV to UHF channel 36. ● If the tw o v ertical white bars appear clearly on the screen as shown in the illustration ( Z "TEST SIGNAL" on page 4), press OK and then go to step 4 . ● If the two v ertical white bars do not appear clearly , press OK and then [...]

6 EN INITIAL SETTINGS (cont.) Auto Set Up Before starting, make sure of the following: ● T he TV aerial cable should be connected to the recorder . ● The recorder's mains power cord should be connected to a mains outlet. Z pg. 3 ● T he "Video Channel Set" procedure should be done first and the TV should be set to its A V mode ([...]

EN 7 AUTO CH SET PLEASE WAIT STAR T FINISH TV Screen When A uto Set Up is completed, the lowest position number will appear on the front display panel. During Auto Set Up "PLEASE W AIT" blinks on the screen and "A uto" blinks on the front display panel. NOTES: ● If you perform Auto Set Up w hen the aerial cable is not connecte[...]

8 EN q6 PR. 12 ] SP 21 : 00 MESECAM 24. 12. 99 –1 : 23 : 45 0 ++ + + INITIAL SETTINGS (cont.) On-Screen Displays Y ou can choose w hether or not to have v arious oper ational indicators appear on screen, by setting this function ON or OFF . T urn on the TV and select the VIDEO channel (or AV mode). TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU [...]

EN 9 Select Language T urn on the TV and select the VIDEO channel (or A V mode). MAIN MENU FUNCTION SET TUNER SET INITIAL SET [ 5 / ∞ ] = [MENU] : EXIT fi fi fi TURN ON THE RECORDER 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS INITIAL SET SCREEN 3 Press PUSH JOG %fi to place the pointer next to "INITIAL SET", then press O[...]

10 EN Clock Set T urn on the TV and select the VIDEO c hannel (or A V mode). TURN THE RECORDER ON 1 Press . ACCESS MAIN MENU SCREEN 2 Press MENU . ACCESS INITIAL SET SCREEN 3 Press PUSH JOG %fi to place the pointer next to "INITIAL SET", then press OK or PUSH JOG . ACCESS CLOCK SET SCREEN 4 Press PUSH JOG %fi to place the pointer next t[...]

EN 11 PLA YBA CK Basic Playback The easiest, most basic operation possible with your video recorder is tape pla ybac k. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the [...]

12 EN Playback Features V ariable-Speed Search ACTIV A TE V ARIABLE-SPEED SEARCH 1 During playback, press PUSH JOG or . ● The more times you press, the faster the playback picture moves. ● T o decrease speed, press the button for the opposite direction. T o resume normal playbac k, press PLA Y . High-Speed Search NOTE: F or short sear ches, pre[...]

EN 13 12 3 4 0 6 78 5 9 1 4 3 2 Manual T racking Y our video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons. OVERRIDE AUTOMA TIC TRACKING 1 Press (SP/LP/EP) on the remote to engage manual tracking. ADJUST TRACKING MANUALL Y 2 Press TV PROG[...]

14 EN Index Search Y our recorder automatically marks index codes at the beginning of each recording. This function gives you quick access to any one of 9 index codes in either direction. NOTE: Before starting, make sure the recorder is in the Stop mode. ACTIV A TE INDEX SEARCH 1 Press PUSH JOG or ( ™ or £ ) on the remote control. " ™ 1&q[...]

EN 15 Next Function Memory T he Next Function Memory "tells" the recorder what to do after rewinding. Before continuing, ensure that the recorder is in the Stop mode. a– F or Automatic Start Of Playbac k After T ape Rewind... ...press REW , then press PLA Y within 2 seconds. b– F or Automatic P ower Off After T ape Rewind... ...press [...]

16 EN RECORDING TV signals being received by the recorder's built-in tuner can be recorded onto a video tape. Y ou can "capture" a TV progr amme using your video recorder . Basic Recording LOAD A CASSETTE 1 Insert a cassette with the record safety tab intact. ● The counter is reset to 0:00:00 and the recorder power comes on automat[...]

EN 17 Recording Features Record One Pr ogramme While W atching Another SELECT CHANNEL TO W A TCH 1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view . ● T he programme selected with the TV's c hannel controls appears on the TV screen while the one selected with the TV [...]

18 EN B.E.S.T . Pictur e System T urn on the TV and select the VIDEO channel (or AV mode). T he B.E.S.T . (Biconditional Equalised Signal T racking) system chec ks the condition of the tape in use during recording and playback, and compensates to pro vide the highest-possible recording and pla yback pictures. The default setting for both recording [...]

EN 19 Recording ST AR T RECORDING 1 Press and hold RECORD and press PLA Y on the remote, or press RECORD on the recorder . DURING B.E.S.T . B.E.S.T . COMPLETE ● The recorder spends approximately 7 seconds assessing the condition of the tape, then begins recording. NOTES: ● T he B.E.S.T . system works for both SP and LP (or EP) modes only after [...]

20 EN Express Timer Pr ogramming Remember , the clock must be set before you can progr amme the timer ( Z pg. 10). Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically . ● T urn on the TV and select the VIDEO channel (or A V mode). ● Select the appropriate colour syst[...]

EN 21 SET T APE SPEED 6 Press SP/LP/EP ( ) to set the tape speed. RETURN TO NORMAL SCREEN 7 After confirming all information is correct, press PROG or OK . "PROGRAM COMPLETED" appears on the screen for about 5 seconds, then normal screen appears. ● Repeat steps 1 – 7 for eac h additional programme. ENGAGE RECORDER'S TIMER MODE 8 [...]

22 EN TIMER RECORDING (cont.) Check, Cancel And Replace Programmes DISENGAGE TIMER MODE 1 Press TIMER , then press . ACCESS PROGRAMME CHECK SCREEN 2 Press PROG CHECK . ACCESS PROGRAMME SCREEN 3 Press PROG CHECK again to check more informa- tion. Eac h time you press PROG CHECK , the next programme's information appears. T o cancel or replace a[...]

EN 23 Auto Timer When the A uto T imer is set to ON the timer is automatically engaged when the recorder power is turned off and automati- cally disengaged when the recorder is powered back on. ACCESS MAIN MENU SCREEN 1 Press MENU . ACCESS FUNCTION SET SCREEN 2 Press PUSH JOG %fi to place the pointer next to "FUNCTION SET", then press OK[...]

24 EN EDITING Edit T o Another V ideo Recorder Y ou can use your video recorder as the source pla yer and another video recorder as the recording deck. MAKE CONNECTIONS 1 Connect the pla yer's AUDIO/VIDEO OUT connectors to the recorder's A UDIO/VIDEO IN connectors. SET RECORDING DECK'S INPUT MODE 2 Set the recording deck's exter[...]

EN 25 Y ou can use a camcorder or another video recorder as the source play er and your video recorder as the recording deck. Edit Fr om A Camcorder Or Another V ideo Recorder MAKE CONNECTIONS 1 Connect the AUDIO/VIDEO OUT connectors on the camcorder or another video recorder to the front panel AUDIO/VIDEO input connectors on the recording deck. SE[...]

26 EN INFORMA TION ON MUL TI-SYSTEM COMP A TIBILITY Setting Of The Colour System Select Buttons Use the COLOUR SYSTEM button on the front panel to select the colour system. Pressing this button changes the mode as illustrated on the left. The On-Screen display will show which mode is selected. Mode Description AUTO Usually set to this mode. This mo[...]

EN 27 Playback This recorder can play back all 3 types of recorded tape. VIDEO OUT AUDIO OUT RF OUT NTSC 4.43 MHz NTSC PAL MESECAM PAL MESECAM NTSC [ PAL NTSC 3.58 MHz PAL SECAM NTSC 3.58 NTSC 4.43 PAL (B/G, D/K, I, H) Recorded tape Playback circuit Manual switching Manual switching Multi-system receiver Multi-system monitor NOTES: When viewing NTS[...]

28 EN T urn on the TV and select the VIDEO channel (or AV mode). TUNER SET ACCESS TUNER SET SCREEN 3 Press PUSH JOG %fi to place the pointer next to "TUNER SET", then press OK or PUSH JOG . SELECT AUTO CH SET MODE 4 Press PUSH JOG %fi to place the pointer next to "A UTO CH SET", then press OK or PUSH JOG . SELECT TV SYSTEM 5 P[...]

EN 29 Manual Channel Set Store channels that were not stored during Auto Set Up ( Z pg. 6) or A uto Channel Set ( Z pg. 28 ). ACCESS TUNER SET SCREEN 1 P erform steps 1 – 3 of "Auto Channel Set" on page 28. ACCESS CHANNEL LIST 2 Press PUSH JOG % fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG . SELECT POS[...]

30 EN TUNER SET (cont.) Delete A Channel ACCESS TUNER SET SCREEN 1 P erform steps 1 – 3 of "Auto Channel Set" on page 28. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG . SELECT CHANNEL 3 Press PUSH JOG %fi to until the channel you want to delete begins blinking. DE[...]

EN 31 Fine-T uning Channels ACCESS TUNER SET SCREEN 1 Perform steps 1 – 3 of "Auto Channel Set" on page 28. ACCESS CHANNEL LIST 2 Press PUSH JOG %fi to place the pointer next to "CH EDIT", then press OK or PUSH JOG . SELECT CHANNEL TO FINE-TUNE 3 Press PUSH JOG %fi until the channel you want to tune begins blinking, then pre[...]

32 EN TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save y ou the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● The mains power cord is discon- nected. ● " ‰ " is displa yed on [...]

EN 33 CORRECTIVE ACTION Insert a cassette, or using adhesi ve tape, reseal the slot where the tab was removed. Set to the desired channel. Confirm that the source is properly connected. Confirm that all units' power switches are turned on. Set the input mode to "F-1". Confirm that the camcorder is properly connected. Set the input mo[...]

34 EN CORRECTIVE ACTION Position the camcorder so its microphone is aw ay from the TV . T urn the TV's volume down. If you need the skipped channels, restore them. ( Z pg. 29) Press P AUSE to pause the recording, change channels, then press PLAY to resume recording. Perform manual setting again. Connect the TV aerial cable to the recorder prop[...]

EN 35 QUESTIONS AND ANSWERS PLA YBACK Q. W hat happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads. Q. During sear ch, slow , still and fr ame-by-[...]

36 EN INDEX 1 Mains Po wer Cord Z pg. 3 2 Lithium Battery Compartment Z pg. 5 3 ANT . IN Connector Z pg. 3 FRONT VIEW 1 ST ANDBY/ON Button Z pg. 8 2 Cassette Loading Slot 3 SP/LP/EP Button Z pg. 16 4 Rewind [REW] Button Z pg. 11, 12 5 PLA Y Button Z pg. 11 6 F ast F orward [FF] Button Z pg. 11, 12 7 VIDEO/AUDIO Input Connectors Z pg. 25 8 REVIEW Bu[...]

EN 37 DISPLA Y P ANEL 1 B.E.S.T . Picture System Displa y Z pg. 18 2 Symbolic Mode Indicators 3 T ape Speed Indicators Z pg. 16 4 "T imer" Indicator Z pg. 21 5 Channel Display Clock Display 6 Instant REVIEW Indicator Z pg. 13 7 "Cassette Loaded" Mark 8 Counter Display 9 Mode Display (F-1) STILL: SLOW : RECORD: RECORD P A USE: PL[...]

38 EN INDEX (cont.) T his remote control transmits A code signals only; it is not applicable to B code signals. How T o Use T he remote control can oper ate most of y our video recorder's functions, as well as basic functions of JVC TV sets. (See below .) ● P oint the remote control toward the sensor window . ● T he maximum operating dista[...]

EN 39 SPECIFICA TIONS GENERAL Power requirement Rating : A C 110 – 240 V ` , 50/60 Hz Operating : AC 0 90 – 260 V ` , 50/60 Hz Power consumption : 18 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 400 x 94 x 275 mm W eight : 3.2 kg Format : VHS standard Maximum reco[...]

EN COPYRIGHT © 1999 VICTOR COMPANY OF JAPAN, LTD. MS Printed in Malaysia 0699IYV * YP * PJ VICTOR COMP ANY OF JAPAN, LIMITED HR-J267MS HR-J261MS ® ® Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD.[...]