Jasco RM24970 инструкция обслуживания

Universal Remote Instruction Manual RM24970[...]

2 Congratulations on your purchase of a 7 function Universal Remote Control. This remote is one of the most easy to use remote controls available today . Now juggling multiple remote controls is a thing of the past! Y our Universal Remote controls up to seven devices, including the most popular brands of TV , VCR, DVD, CBL, and SA T . It is easy to[...]

3 Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. Battery Saver Y our remote automatically turns off if the buttons are depressed more than 30 seconds.[...]

4 VOLUME UP/DOWN Changes the volume level of the product, normally the TV . MUTE T urns off the TV sound while the picture remains. CODE SEARCH For setup. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV .CH may be called RECALL, or ENTER may be called DISPLA Y . Th[...]

5 ON•OFF T urns product On or Off. CHANNEL Up/Down Changes the channels TRACK +/- controls DVD/ CD track selection i.e. DVD/ CD T rack Skip Up/Down (in DVD and CD modes). Button Functions, cont. Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it a[...]

6 Operating Audio Functions Note: Not all functions work for all brands. T urning on the Receiver or Mini-System Point the remote control at the receiver and press the AUDIO button. The receiver should turn on. In some cases you might need to press the AUDIO button and then the ON•OFF button to turn the system on. Selecting a device Input Device [...]

7 Using the number buttons to change audio inputs T o select a device, press the number button (1-6) that corresponds to the device you want to operate (CD, T APE, TUNER, TV , or VIDEO). Using the function buttons to change audio devices T o select a device, press the FUNCTION button until the input you want to operate appears on your system. Opera[...]

8 The surround sound feature may be turned ON/ OFF by pressing the SURR ON•OFF button. Surround Sound Feature 1. Press the SURR MODE button until the desired mode is found. 2. Press DELA Y+ or DELA Y - to achieve the desired delay affect. 3. Press the DSP ON•OFF button to turn DSP (Digital Sound Processor) ON or OFF . 4. Press the DSP mode butt[...]

9 Write your codes down here for easy reference later . Direct Code Entry 1. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. 2. Press and release the desired device button ( TV , VCR , etc.). The red indicator blinks, then stays lit. 3. Enter the 4 digit code from the code tables (on sepa[...]

10 Code Search If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device ( TV , VCR , etc.) to be controlled. 2. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE S[...]

1 1 Using Y our Remote Code Identication The Code Identication Feature allows you to identify the four digit library code stored under your device button. For example, if you want to nd out what four digit code is stored under your TV device button, follow the six steps below: 1. Press and hold the CODE SEARCH button until the red indicato[...]

12 Using Y our Remote, cont. Sleep Function The Sleep button enables the remote to turn off your TV after a period of 1 to 99 minutes as shown below . The remote must be in TV mode to set a Sleep T imer . This feature works even if your TV does not have a sleep feature. 1. Press and release the TV device but - ton. 2. Press and hold the Sleep butto[...]

13 Using Y our Remote, cont. Controlling Devices with Separate Power On and Off Buttons Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the ON•OFF button to turn the device off. Controlling Combo Devices Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will require y[...]

14 V olume/Mute Control and Punch- Through This remote lets you select which device Mode controls your V olume/Mute buttons. The remote is initially set for all device Modes to use their own V olume/Mute control if present. If the programmed code has no V olume/Mute operation of its own then those buttons will punch-through control to the TV Mode d[...]

15 Using Y our Remote, cont. V olume/Mute Control This routine can set any Mode to use only its own V olume/Mute control. Note - If your chosen Mode has no V olume/Mute functions of its own then the V olume/Mute buttons will do nothing. 1. Press and hold the CODE SEARCH button until the red indicator turns on, then release the button. 2. Press and [...]

16 Remote does not operate your product. • Press the device button of the product you want to control. • Program the remote with a new code. • Install new batteries. (Y ou might have to reprogram your remote after installing new batteries.) • Remote may not be compatible with your product. Remote does not operate some features of your produ[...]

17 Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This wa[...]

Jasco Products Company 31 1 N.W . 122nd Oklahoma City , OK 731 14 Made in China RM24970- Universal Remote Instruction Manual RM24970[...]