Intel PT800DBP инструкция обслуживания

PT800DB / PT800DBP PT800DBZ User's Manual Intel Socket 478 Pr ocessor Motherboard VIA PT800 + VIA 8237 Revision 1.0 P / N: G03 –PT800DB[...]

i T a b l e o f C o n t e n t Manual Revisi on History........................................................................................................ ............... ii Copyright An nou ncement ......................................................................................................... ............ ii Trademarks Notice .......[...]

ii M a n u a l R e v i s i o n H i s t o r y Revision Manual Revision Histor y D a t e of Release Rev 1.0 First edition cop y of Mother 11/24/2003 B o a r d s a d o p t s V I A C h i p s e t s : V I A PT800 and VIA 8237 C o p y r i g h t A n n o u n c e m e n t COPYRIGHT OF THIS MANUAL BE LONGS TO THE MANUF ACTURER. NO P A R T OF T HI S M AN U A L [...]

iii or trademarks of NVIDIA Corporation in the United States and/or other countries. PS/2 and OS®/2 are registered trademarks of International Business Machines Corporation. PCMCIA and CardBus are registered tr ademarks of the Personal Computer Memory Card International Association. Windows® 98/2000/NT/XP are registered trademarks of Microsoft Co[...]

iv 5 PT800DB/PT800DBP/PT800DBZ Motherboard 5 Cable for IDE/Floppy 5 Cable for Serial ATA IDE Port 5 CD for motherboard utilities □ Cable for USB Port 3/ 4 (Option) 5 PT800DB/PT800DBP/PT800DBZ User’s Manual Intel Pentium 4 Socket478 Processor Thermal Solutions As processor technology pushes to fast er speeds and higher performance, thermal manag[...]

1 Chapter 1 Intr oduction of PT800DB/PT8 00DBP/PT800DBZ Motherboard Thank you for purchasing the PT800 series which provide extremely performance and meet future specification demand. PT800 series motherboards are adopt ed with advanced technologies to deliver the extremely performance for Intel Pentium 4 socket 478 processors. PT800 series motherb[...]

2 1-2 Specification Spec Description Design ∗ ATX form factor 4 laye rs PCB size: 30.5x21.0cm Chipset ∗ VIA PT800 North Bridge Chipset ∗ VIA VT8237 South Bridge CPU Socket ∗ Support Intel Pentium 4 478-Pin package utilizes Flip-Chip Pin Grid Array (FC-PGA2 ) package processor ∗ Support 1.5G ∼ 3.2G 478 Pin Pentium 4 processor ∗ Reserve[...]

3 1-3 Performance List The following performance data list is the test ing result of some popular benchm ark testing programs. These data are just referred by users, a nd there is no responsib ility for different testing data values gotten by users (the dif ferent Hard ware & Software configuration will result in dif ferent benchmark testing re[...]

4 1-4 Layout Diagram & Jumper Setting PS/2 Keyboard COM1 COM2 USB LINE-OUT LINE-IN MIC PRINT GAME/MIDI POR T PS/2 Mouse (for PT800DBP/ PT800DBZ) LAN Front Panel Audio PC99 Back Panel CD Audio PCI Slot AGP Slot VIA PT800 Chip A TX Power Connecto r CPU F AN CPU Socket DDR SDRAM DIMM x3 System FAN W ake On LAN A TX 12V Power Conn. USB Port/ LAN Co[...]

5 Jumpers Jumper Name Description Page JBAT CMOS RAM Clear 3-pin Block P.6 JP1 Keyboard Power On Enable/Disabled 3-pin Block P.7 JP2, JP4 CPU Front Side Bus Frequency Select 6-pin Block P.7 Connectors Connector Name Description Page ATXPWR ATX Power Connector 20-pin Block P.12 ATX12V ATX 12V Power Connector 4-pin Block P.12 ATXP1 ATX P9 Power Conne[...]

6 Chapter 2 Hardwar e installation 2 - 1 P r e - H a r d w a r e i n s t a l l a t i o n Before starting to use the computer with the motherboard installed th e com ponents on it, please make sure complete the f o llowing steps: 1. To verify the jumper set tings of your motherboard 2. To install the CPU and Cooling Kits 3. To install the system m e[...]

7 (2) Keyboard Power On function Enabled/Disabled: JP1 When setting Enabled you can using keyboard by key in password to power on system. JP1 1 3 JP1 1 3 Keyboard Power On Setting 2-3 closed K/B Pow er ON Enabled 1-2 closed K/B Power ON Disable (Default) (3) CPU Front Side Bus Frequency Select Jumper : JP2, JP4 (2x3-pin) JP2 JP4 CPU CLK 1-2 1-2 AUT[...]

8 2 - 3 T o i n s t a l l t h e C P U 2 - 3-1 Glossary Chipset (or cor e logic) - two or more integrated circuits which control the interfaces between the system processor , RAM, I/O devises, and adapter cards. Processor socket - the socket used to mount the sy stem processor on the motherboard. Slot (AGP , PCI, ISA, RAM DIMMs) - the slots used to [...]

9 2-3-2 About INTEL PENTIUM 4 478-PIN CPU This motherboard provides a 478-pin surface mount , Zero Insertion Force (ZIF) socket, referred to as the mPGA478B socket supports Intel Pentiu m 4 processor in the 47 8 Pin package utilizes Flip-Chip Pin Grid Array (F C-PGA2) package technology. The CPU that comes with the motherboard should ha ve a coolin[...]

10 Generally speaking, installing DDR SDRAM modules to your motherboard is very easy, you can refer to figure 2-4 to see what a 184- Pin PC2100/PC2700/PC3200 DDR SDRAM module looks like. DDR2 (BANK2+BANK3) DDR1 (BANK0+BANK1) DDR3 (BANK4+BANK5) NOTE! When you install DIMM modules fully into the DIMM sockets the eject tab should be locked into the DI[...]

11 2-5-2 Assigning IRQs For Expansion Card Some expansion cards need to as sign an IRQ address to op erate. Generally speaking, an IRQ address must exclusively assign to one use only. With standard factory design, there are 16 IRQs available, but most of them are already in use. Standard Interrupt Assignments IRQ Priority Standard function 0 N/A Sy[...]

12 This motherboard provides an AGP Slot, support the 4X/8X AGP VGA card. AGP SLOT 2-6 Connectors and pin headers 2-6-1 Connectors (1) Power Connector (20-pin block) : ATXPWR ATX Power Supply connector. This is a new defined 20-pins connector that usually comes with ATX case. The ATX Power Supply allows to use soft power on momentary switch that co[...]

13 Pin 1 (3) ATX P9 Power Connector (6-pin block) : ATXP1 This is a new defined 6-pins connector that usually comes with ATX Power Supply. The ATX Power Supply which fully support Pentium 4 processor must including this connector for support extra 3.3V and 5V vo ltage to maintain system powe r consumption. Without this connector might cause system [...]

14 (9) Serial Port COM1 , COM2 : COM1, COM2 COM1, COM2 are the 9-pin D-Subminiature mail connector. The On-board serial port can be d isabled through BIOS SETUP. Please refe r to Chapter 3 “IN TEGRATED PERIPHERALS SETUP” se c t ion for mo r e detail information. (10) Floppy drive Conn ector (34-pin block): FDD Th i s connector supports the pr o[...]

15 Primary IDE Connector Pin 1 IDE1 (12) Secondary IDE Connector (40-pin block): IDE2 This connector connects to the next set of Ma ster and Slave hard disks. Follow the same procedure described for the primary IDE conn ector. You may also configure two hard disks to be both Masters using one ribbon cable on the primary IDE connector and another ri[...]

16 2-6-2 Pin headers (1) IEEE 1394A Port Header (9-pin) : 1394A/1394B (For PT800DBZ only) Note: Orient the read marking on the 1394 ribbon cable to pin 1 IEE1394 A Port Header 1394A Pin 1 2 9 10 1394B Pin 1 2 9 10 (2) Line-Out, MIC Header (9-pin): AUDIO This header connect to Front Pa nel Line-out, MIC connector with cable. Line-Out, MIC Headers AU[...]

17 (5) Reset switch lead: RESET This 2-pin connector connects to the case-mount ed reset switch for reb ooting your computer without having to turn off your power switch. This is a preferred me thod of rebooting in order to prolong the lift of the system’s power supply. See the figure below. (6) Speaker connector: SP EAK This 4-pin connector conn[...]

18 (10) FAN Speed Headers (3-pin) : SFAN1, SYSFAN, CPUFAN These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the fan manufacturer, the wire and plug may be different. The red wire should be positive, while the black should be ground. Connect the fan’s plug to the board taking into consideration the polarity of connec[...]

19 2 - 7 S t a r t i n g u p y o u r c o m p u t e r 1. After all connection are ready, close your computer case cover. 2. Be sure all the switches are off, and check that the power supply input vo ltage is set to proper position, usually in-p ut voltage is 220V ∼ 240V or 110V ∼ 120V depending on your country’s voltage used. 3. Connect the po[...]

20 Chapter 3 Intr oducing BIOS Settings The BIOS is a program located on a Flash Memory of the motherboard. Us ing this program as a bridge between motherboard and operating system . When the computer starting to work, the BIOS program gain control. The BIOS first oper ates an auto-diagnostic te st called POST (power on self test) for all the neces[...]

21 3 - 2 G e t t i n g H e l p Main Menu The on-line description of the highlighted setup function is displa yed at the bottom of the screen. Status Page Setup Menu/Option Page Setup Menu Press F1 to pop up a small help window that descri bes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Wi ndow,[...]

22 Standard CMOS Features Use this Menu for basic system configurations. Advanced BIOS Features Use this menu to set the Advanced Features available on your system. Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize your system ’s performance. Integrated Peripherals Use this menu to specify your set[...]

23 3-4 S t a n d a r d C M O S F e a t u r e s The items in Standard CMOS Setup Menu are divi ded into several categories. Each category includes no, one or more than one setup items. Use the arrow keys to highlight the item and then use the <PgUp> or <PgDn> keys to select the value you want in each item. CMOS Setup Utility – Copyrigh[...]

24 Access Mode The settings are Auto Normal, Large, and LBA. Cylinder number of cylinders Head number of heads Precomp write precomp Landing Zone landing zone Sector number of sectors 3-5 Advanced BIOS Features CMOS Setup Utility – Copyright(C) 1984-2003 Award Software Advanced BIOS Features Item Help Anti-Virus Protection Disabled C P U L 1 C a [...]

25 CPU Internal Cache The default value is Enabled. Enabled (default) Enable cache Disabled Disable cache Note: The internal cache is built in the processor. External Cache Choose Enabled or Disabled. This op tion enables the Level 2 cache memory. CPU L2 Cache Choose Enabled or Disabled. This op tion enables the Level 2 cache memory. Quick Power On[...]

26 Typematic Delay (Msec) Sets the delay time after the key is held down be fore is begins to repeat the keystroke. The settings are 250, 500, 750, and 1000. Security Option This category allows you to limit acc ess to the system and Setup, or just to Setup. System The system will not boot and access to Se tup will be denied if the correc t passwor[...]

27 System BIOS Cacheable Selecting Enabled allows caching of the sy stem BIOS ROM at F0000h-FFFFFh, resulting in better system performance. However, if any progr am writes to this memory area, a system error may result. The settings are: Enabled and Disabled. Video RAM Cacheable Select Enabled allows caching of the video BI OS, resulting in better [...]

28 CAS Latency When synchronous DRAM is insta lled, the number of clock cycles of CAS latency depends on the DRAM timing. The settings are: 2T and 2.5T. 3-6-2 AGP Timing Settings CMOS Setup Utility – Copyright(C) 1984-2003 Award Software AGP Timing Settings Item Help AGP Transfer Aperture Size 64M AGP Transfer Mode 4X AGP Driving Control Auto * A[...]

29 3 - 7 I n t e g r a t e d P e r i p h e r a l s CMOS Setup Utility – Copyright(C) 1984-2003 Award Software Integrated Peripherals Item Help > OnChip IDE Function Press Enter > OnChip Device Function Press Enter > Onboard Super IO Function Press Enter Init Display First PCI Slot Menu Level > ↑↓→← Move Enter:Select +/-/PU/PD:[...]

30 3-7-1 OnChip IDE Function CMOS Setup Utility – Copyright(C) 1984-2003 Award Software OnChip IDE Function Item Help OnChip IDE Channel0 Enabled OnChip IDE Channel1 Enabled Primary Master PIO Auto P r i m a r y S l a v e P I O A u t o Secondary Master PIO Auto Secondary Slave PIO Auto Primary Master UDMA Auto P r i m a r y S l a v e U D M A A u [...]

31 3-7-2 OnChip Device Function CMOS Setup Utility – Copyright(C) 1984-2003 Award Software OnChip Device Function Item Help VIA 1394 Function Enabled → (for PT800DBZ) V I A S A T A F u n c t i o n Enabled → (for PT800DBP/ VIA LAN Function Enabled PT800DBZ) VIA LAN Boot ROM Disabled VIA LAN BootROM Boot option Hook INT19 VIA LAN BootROM PXERPL[...]

32 3-7-3 Onboard Super IO Function CMOS Setup Utility – Copyright(C) 1984-2003 Award Software Onboard Super IO Function Item Help Onboard FDD Controller Enabled Onboard Serial Port 1 3F8/IRQ4 Onboard Serial Port 2 2F8/IRQ3 U A R T 2 M o d e N o r m a l R x D , T x D A c t i v e Hi, Lo I R D u p l e x M o d e Half U s e I R P i n s I R R X / I R T[...]

33 SPP/EPP/ECP/ECP+EPP To operate the onboard pa rallel port as Standard Parallel Port only, choose “SPP.” To operate the onboard parallel port in the E PP modes simultaneously, choose “EPP.” By choosing “ECP”, the onboard parallel port w ill operate in ECP mode only. Choosing “ECP+EPP” will allow the onboard parallel port to suppor[...]

34 Video Off Method This determines the m anner in which the monitor is blanked. DPMS (default) Initial display power management signaling. Blank Screen This option only writes bl anks to the video buffer. V/H SYNC+Blank This selection will cause the syst em to turn off the vertical and horizontal synchronization ports and wr ite blanks to the vide[...]

35 W a ke-Up on R TC Alarm This function is for setting date and time for your computer to boot up. During Disabled, you cannot use this function. During Enable d, choose the Date and T ime Alarm: Date(of month) Alarm Y ou can choose which month the system will boot up. Set to 0, to boot every day . T ime(hh:mm:ss) Alarm Y ou can choose what hour ,[...]

36 CMOS Setup Utility – Copyright(C) 1984-2003 Award Software PnP/PCI Configurations Item Help PnP OS Installed No Reset Configuration Data Disabled Resources Controlled By Manual x I R Q R e s o u r c e s P r e s s E n t e r PCI/VGA Palette Snoop Disabled Assign IRQ For VGA Enabled Assign IRQ For USB Enabled Menu Level > ↑↓→← Move Ent[...]

37 3-9-1 IRQ Resources CMOS Setup Utility – Copyright(C) 1984-2003 Award Software IRQ Resources Item Help IRQ3 assigned to PCI Device IRQ4 assigned to PCI Device IRQ5 assigned to PCI Device IRQ7 assigned to PCI Device IRQ9 assigned to PCI Device IRQ10 assigned to PCI Device IRQ11 assigned to PCI Device IRQ12 assigned to PCI Device IRQ14 assigned [...]

38 Current CPU T emperature/Curr ent System T emp/Current F AN1, F AN2 Speed/Vcore/ Vdd/ 3.3V/+5V/+12V/-12V/VBA T(V)/5VSB(V) This will show the CPU/FAN/System voltage chart and FAN Speed. Detect CPUF AN in Post During Enabled, system will warn the user if CPU Fan is not functioning. 3-11 Miscellaneous Control This section is for setting CPU Frequen[...]

39 3-12 Load Standard/Optimized Defaults Load S tandard Defaults When you press <Enter> on this item, you get confirmation dialog box with a m essage similar to: Load Standard Defaults (Y/N)? N Pressing <Y> loads the BIOS default values for the m ost stable, minimal-performance system operations. Load Optimized Defaults When you press &[...]

40 Chapter 4 DRIVER & FREE PROGRAM INST ALLA TION Check your package and th ere is A MAGIC INSTALL CD include d. This CD consists of all DRIVERS you need and some free application programs and utility programs. In ad dition, this CD also include an auto detect software which can tell you whic h hardware is installed, and which DRIVERS needed so[...]

41 4-1 VIA 4IN1 Inst all VIA Service Pack 4 IN 1 Driver * The path of the file is X:VIADRIVERSETUP.EXE IDE : V I A A T API VENDOR SUPP OR T DRIVER IS USED TO F I X E D C O M PA T I B I L I T Y ISSUE FOR IDE DEVICES AGPVXD : VIA AGPVXD DRIVER IS TO BE INST ALLED, IF YOU ARE USING AN AGP VGA CARD, VIAGAR T .VXD WILL PROVIDE SER VICE ROUTINES TO YO[...]

42 5. Click NEXT to Install ATAPI Vender Support Driver 6. Click NEXT to choose enabled DMA Mode 7. Click NEXT to Install VIA AGP VXD Driver 8. Click NEXT to Install VIA IRQ Routing Mini port Driver 9. Click Finish to restart computer[...]

43 4-2 SOUND inst all ALC AC97’ Codec Audio Driver 1. Click SOUND when MAGIC INSTALL MENU appears 2. Then auto detect operation system language edition, click OK, start to install DRIVER 3. Click Finish and Restart Windows 4. Click Start → Program → Avance Sound Manager → AvRack. Then AVRACK Windows appears 5. Sound Effect select and KaraOK[...]

44 7. 2/4/6 channel speaker conf iguration setting 8. 6 channel speaker place test Note: The path of the file For WIN98/NT4.0/WIN2K/XP is X:CODECALCSETUP.EXE Note: In Win2K/WinME users have to click Control PanelSystemDevi ce Manager DVDCD-ROM drives to Enabled d igital CD Audio for the CD-ROM Device when use the SPDIF-Out digital signal. 4-[...]

45 4-4 PC-HEAL TH Winbond Hardware Doctor Monitoring Software The path of the file is X : V IA H E A L TH - W S E T U P .E X E ( O n l y s u pp o r t WINDOWS 95/98/98SE/ME) In Windows 95/98 Winbond Hardware Doctor Monito ring Software needs som e system files to copy in Utility that’s why it needs instal l PC-HEALTH twice to complete setup. 1[...]

46 4-5 MAGIC BIOS Inst all BIOS Live Up date Utility 1. Click Magic BIOS when Magic Install MENU appears 2. Click Next to install the Magic BIOS in Destination Folder 3. After finish Setup you will have a Magic BIOS icon in your screen 4. Double click the Magic BIOS icon you will have this picture, choose from internet you can upgrade BIOS On-line [...]

47 9. When choose From Local Driver to up date BIOS, you must have the correct BIOS file in your Local Driver 10. Choose the correct BIOS file to update BIOS 4-6 PC-CILLIN Inst all PC-CILLIN 2002 Anti-virus program 1. Click PC-CILLIN when MAGIC INSTALL MENU appear 2. (1) Click "Install PC-CILLIN" when PC-CILLIN 2002 main menu appears, and[...]

48 5. Click INSTALL, Start to install the software 6. Setup Complete and click FINISH 7. After PC-CILLIN 2002 complete, Please register your information and get LICENSE KEY from TREND MICRO web site, enter your license key and click FINISH 8. finish register process, we recommend select update item to download newest engine code and virus code Note[...]

49 3. Select Install USB Driver and Click NEXT 4. Select FINISH and Restart your Computer 5. Check device working pro perly in Device Manager The Path of the file is X:VIAVIAUSB20SETUP .EXE 4 - 8 S A T A I n s t a l l V I A S e r i a l A T A 1. Click SATA when MAGIC INSTALL MENU appears 2. Start install VIA serial ATA driver , then click NEXT 3.[...]

50 5. Review install driver and utility component, then click NEXT 6. Click FINISH and restart your comp uter 4-9 HOW TO DISABLE ON-BOARD SOUND Enter BIOS SETUP choos e INTEGRATE PERIPHERALS choose ON-CHIP DEVICE FUNCTION choose AC97 SOUND DEVICE Disable on-board sound function by pr ess P AGE DOWN KEY to Disable 4-8 HOW T O DISABLE ON-BOARD SOUND [...]