Intel IB935 инструкция обслуживания

IB935 (IB935, IB935RF) Socket LGA775 Pentium ® 4 Intel ® Q35 Chipset PICMG 1.3 SHB Express CPU Card USER’S MANUAL Version 1.0[...]

ii I B935 User’s Manual Acknowledgments Award is a registered trademark of Award Software International, Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Pentium 4 are registered trademarks of Intel Corporation. Microsoft Windows is a regist ered trademark of Microsoft Corporation. Winbond is a registered tradema[...]

IB935 User’s Manual iii Table of Contents Introduction .............................................................. 1 Product Description ............................................................. 1 Checklist .............................................................................. 2 Specifications ......................................[...]

The IB935 CPU Card iv I B935 User’s Manual[...]

INTRODUCTION IB935 User’s Manual 1 Introduction Product Description The IB935 PICMG1.3 SHB board incorporates the Intel® Q35 Express Chipset, consisting of the Intel® Q35 Graphi c Memory Controller Hub (GMCH) and Intel® I/O Controller Hub 9 (ICH9), is an optimized integrated graphics solution with a 800/1066/1333 MHz front-side bus. The integr[...]

INTRODUCTION 2 I B935 User’s Manual Checklist Your IB935 Pentium ® 4 CPU card package should include the it ems listed below: • The IB935 CPU card • This User’s manual • 1 Floppy cable • 1 IDE cable • 1 USB cable with bracket (USB2K-4) • 1 Y-Cable supporting a PS/2 Key board and a PS/2 Mouse • 1 SATA cable • 2 Serial Port Ribbo[...]

INTRODUCTION IB935 User’s Manual 3 Specifications Product Name IB935 Form Factor PICMG 1.3 SHB Express full size CPU card CPU Support Socket LGA775, Supports the Intel Core 2 Duo and Intel Core2 Quad processors, and Intel Celeron 400 (Conroe-L) Sequence processor. CPU Voltage 0.5V~1.6V (VRD 11.0) System Speed Up to 3.8GHz+ CPU FSB 800MHz/1066MHz [...]

INTRODUCTION Board Dimensions 4 I B935 User’s Manual[...]

INSTALLATIONS IB935 User’s Manual 5 Installations This section provides inform ation on how to use the jum pers and connectors on the IB935 in order to set up a workable syst em. The topics covered are: Installing the CPU ........................................................................ 6 Installing the Memory .............................[...]

INSTALLATIONS Installing the CPU The IB935 board supports an LGA 775 processor socket for Intel Core 2 Duo and Intel Core2 Quad processors, and Int el Ce leron 400(Conroe-L) Sequence processor. The LGA 775 processor socket comes with a l ever to secure the processor. Refer to the pictures belo w, from left to right, on how to place the processor in[...]

INSTALLATIONS Installing the Memory The IB935 board support s two DDR2 m emory sockets for a m aximum total m emory of 4GB in DDR2 me mory ty pe. It supports DDR2 667/800. Basically, the system mem ory in terface has the following features: Supports two 64-bit wide DDR data channels Available bandwidth up t o 6.4GB/s (DDR 2 800) for single-channel [...]

INSTALLATIONS 8 I B935 User’s Manual Setting the Jumpers Jumpers are used on IB935 to select various settings and features according to your needs and applica tions. Contact your supplier if you have doubts about the best configurati on for your needs. The following lists the connectors on IB935 and t heir respective functions. Jumper Locations o[...]

INSTALLATIONS Jumper Locations on IB935 Jumpers on IB935 ............................................................................. Page JP1, JP2, JP3: RS232/422/ 485 (COM2) Selection .............................. 10 JP4: Configure and Recovery (Factory use only) ................................ 10 JP5: Power ON Setting ........................[...]

INSTALLATIONS JP1, JP2, JP3: RS232/ 422/485 (COM2) Selection COM1 is fixed for RS -232 use only. COM2 is selectabl e for RS232, RS-422 and RS-485. The following table describes t he jumper settings for C OM2 selection. COM2 Function RS-232 RS-422 RS-485 Jumper Setting (pin closed) JP1: 1-2 JP2: 3-5 & 4-6 JP3: 3-5 & 4-6 JP1: 3-4 JP2: 1-3 &am[...]

INSTALLATIONS JP7: ICH9 PCI-E port 1-4 Configuration Settings JP7 Setting Function Pin 1-2 & 3-4 Short ICH9 PCI-E port 1-4 sett ing as 1x PCI-E x4 Pin 1/2/3/4 Open ICH9 PCI-E port 1-4 setting as 4x PCI-E x1 JP11: Clear CMOS Contents Use JP11 to clear the CMOS contents. N ote that the ATX-power connector should be disconnected from the board bef[...]

INSTALLATIONS 12 I B935 User’s Manual Connectors on IB935 The connectors on IB935 all ow you to connect external devi ces such as keyboard, mouse, hard disk dri ves, printers… etc. The following table lists the connectors on IB935 and t heir respective functions. Connector Locations on IB935 .....................................................[...]

INSTALLATIONS Connector Locations on IB935 ATX1: ATX 12V Power Connector DIMM1: Channel A DDR2 Socket DIMM2: Channel B DDR2 Socket CPU_FAN1: CPU Fan Power Connector SYS_FAN 1, SYS_FAN2: System Fan Power CN1, CN2, CN3, CN4: SATA HDD Connector IDE1: Primary IDE Connectors FDC1: Floppy Drive Connecto r VGA1: VGA CRT Connector J1: External Audio Conn e[...]

INSTALLATIONS ATX1: ATX 12V Pow er Connector Pin # Signal Name 1 Ground 2 Ground 3 +12V 4 +12V DIMM1: Channel A DDR2 Socket DIMM1is the first-channel DDR2 sockets. DIMM2: Channel B DDR2 Socket DIMM2 is the second-channel DDR2 socket s. CPU_FAN1: CPU Fan Pow er Connector Pin # Signal Name 1 Ground 2 +12V 3 Rotation detection 4 Control SYS_FAN1, SYS_[...]

INSTALLATIONS IDE1: Primary IDE Connector IDE1 Signal Name Pin # Pin # Signal Name Reset IDE 1 2 Ground Host data 7 3 4 Host da t a 8 Host data 6 5 6 Host data 9 Host data 5 7 8 Host data 10 Host data 4 9 10 Host data 11 Host data 3 11 12 Host data 12 Host data 2 13 14 Host data 13 Host data 1 15 16 Host data 14 Host data 0 17 18 Host data 15 Groun[...]

INSTALLATIONS VGA1: VGA CRT Connector Signal Name Pin # Pin # Signal Name Red 1 2 Green Blue 3 4 N.C . GND 5 6 GND GND 7 8 GND VCC 9 10 GND N.C. 11 12 DDCDATA HSYNC 13 14 VSYNC DDCCLK 15 J1: External Audio Connector J1 is a 12-pin header that is used to connect to the optional audio cable that integrates jacks for Li ne In, Line Out and Mic. Signal[...]

INSTALLATIONS J3: Digital I/O Connector (4 in, 4 out) This 10-pin digital I/O connector supports TTL levels and is used to control external devices requi ring ON/OFF circuitry. Signal Name Pin # Pin # Signal Name Ground 1 2 +5V Out3 3 4 Out1 Out2 5 6 Out0 IN3 7 8 IN1 IN2 9 10 IN0 J4: IrDA Connector Pin # Signal Name 1 +5V 2 No connect 3 Ir RX 4 Gro[...]

INSTALLATIONS J6: COM2 Serial Port COM2 is jum per selectable for RS-232, RS-422 and R S-485. Please refer to JP1, JP2, JP3: RS232/422/485 (C OM2) Selection Pin # Signal Name RS-232 R2-422 RS-485 1 DCD TX- DATA- 2 RX TX+ DATA+ 3 T X RX+ NC 4D T R R X - N C 5 Ground Ground Ground 6 DSR RTS- NC 7R T S R T S + N C 8C T S C T S + N C 9R I C T S - N C 1[...]

INSTALLATIONS Speaker: Pins 1 - 4 This connector provides an interface to a speaker for audio tone generation. An 8-ohm speaker is recomm ended. Pin # Signal Name 1 Speaker out 2 No connect 3 Ground 4 +5V Power LED: Pins 11 - 13 The power LED indicates the status of the m ain power switch. Pin # Signal Name 11 Power LED 12 No connect 13 Ground ATX [...]

INSTALLATIONS Hard Disk Drive LED Connector: Pins 10 and 20 This connector connects to the hard drive acti vity LED on control panel. This LED will flash when the HDD is being accessed. Pin # Signal Name 10 HDD Active 20 5V J9: PS/2 Keyboard and Mouse Connector J9 uses a Y-cable with dual D-connectors for a PS/2 key board and a PS/2 mouse. J9 Pin #[...]

INSTALLATIONS J13: USB Connector The following table shows t he pin outs of the USB pin header. J13 Signal Name Pin Pin Signal Name Vcc 1 5 Ground USB0- 2 6 USB1+ USB0+ 3 7 USB1- Ground 4 8 Vcc J14: USB Connector The following table shows t he pin outs of the USB pin header. J14 Signal Name Pin Pin Signal Name Vcc 1 5 Ground USB2- 2 6 USB3+ USB2+ 3[...]

INSTALLATIONS 22 I B935 User’s Manual This page is intention ally left blank.[...]

BIOS SETUP IB935 User’s Manual 23 BIOS Setup This chapter describes the different setting s available in the Award BIOS that comes with the board. The topics covered in this chapter are as follows: BIOS Introduction ............................................................................... 24 BIOS Setup ......................................[...]

BIOS SETUP 24 I B935 User’s Manual BIOS Introduction The Award BIOS (Basic Input/Output Sy stem) instal led in your computer sy stem’s ROM support s Intel processors. The BIOS provides critical l ow-level support for a standard device such as disk dri ves, serial ports and parallel ports . It also adds virus and password protection as well as s[...]

BIOS SETUP IB935 User’s Manual 25 Phoenix - AwardBIOS CMOS Setup Utility Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password PnP/PCI Configurations Save & Exit Se[...]

BIOS SETUP 26 I B935 User’s Manual Standard CMOS Setup “Standard CMOS Setup” choice al lows you to record some basi c hardware configurations in your com puter system and set the system clock and error handling. If the m otherboard is already install ed in a working system, you will not need to select this option . You will n eed to run the S[...]

BIOS SETUP IB935 User’s Manual 27 Time The time format is: Hour : 00 to 23 Minute : 00 to 59 Second : 00 to 59 To set the time, hi ghlight the “Time” field and use the <PgUp>/ <PgDn> or +/- keys to set the current time. IDE Channel Master/Slave The onboard Serial ATA connectors provide Prim ary and Secondary channels for connectin[...]

BIOS SETUP 28 I B935 User’s Manual Video This field selects the type of video di splay card instal led i n your syst em . You can choose the following video displ ay cards: EGA/VGA For EGA, VGA, SEGA, SVGA or PGA monitor adapters. (default) CGA 40 Power up in 40 column m ode. CGA 80 Power up in 80 column m ode. MONO For Hercules or MDA adapters. [...]

BIOS SETUP IB935 User’s Manual 29 Advanced BIOS Features This section allows you to configure and im prove your system and allows you to set up some system f eatures according to your preference. Phoenix - AwardBIOS CMOS Setup Utility Advanced BIOS Features CPU Feature Press Enter ITEM HELP Hark Disk Boot Priori ty Press Enter Menu Lev el > Vi[...]

BIOS SETUP 30 I B935 User’s Manual First/Second/Third Boot Device These fields determine the drive that the system searches first for an operating system . Boot Other Device These fields allow the system to s earch for an OS from other devices other than the ones selected in the First /Second/Third Boot Device. Sw ap Floppy Drive This item allows[...]

BIOS SETUP IB935 User’s Manual 31 Security Option This field allows you to limit access to the System and Setup. The default value is Setup . When you select System, the system prompts for the User Password every ti me you boot up. When you select Setup, the system always boots up and prom pts for the Supervisor Password only when the Setup utili[...]

BIOS SETUP 32 I B935 User’s Manual Advanced Chipset Features This Setup me nu controls the configuration of t he chipset. Phoenix - AwardBIOS CMOS Setup Utility Advanced Chipset Features DRAM Timing Selectabl e By SPD ITEM HELP CAS Latency Time Auto Menu Level > DRAM RAS# to CAS# Dela y DRAM RAS# Precharg e Precharge dealy ( tRAS) System Memor[...]

BIOS SETUP IB935 User’s Manual 33 Precharge delay (tRAS) The default setting for the Active to Precharge Delay is Auto. System Memory Frequency This field sets the frequency o f the DRAM memory installed. The default setting is Auto . The other settings are DDR667 and DDR800 . System BIOS Cacheable The setting of Enabled allows caching of the sys[...]

BIOS SETUP 34 I B935 User’s Manual Integrated Peripherals This section sets configurations for your hard disk and other i ntegrated peripherals. The first screen shows th ree main items for user to select. Once an item selected, a submenu appears. Details follow. Phoenix - AwardBIOS CMOS Setup Utility Integrated Peripherals OnChip IDE Device Pres[...]

BIOS SETUP IB935 User’s Manual 35 Phoenix - AwardBIOS CMOS Setup Utility USB Device Setting USB 1.0 Controller Enabled ITEM HELP USB 2.0 Controller Enabled Menu Level > USB Keyboard Function Disabled USB Mouse Function Disabled USB Storage Function Enabled *** USB Mass Storage Device Boot Setting *** IDE HDD Block Mode This field allows your h[...]

BIOS SETUP 36 I B935 User’s Manual LEGACY Mode Support When the Serial ATA (SATA) is set with the legacy mode enabled, th en the SATA is set to the conventional IDE m ode. Legacy mode is otherwise known as compat ible mode. Pow er ON Function This field is related to how the system is powered o n – such as with th e use of conventional power bu[...]

BIOS SETUP IB935 User’s Manual 37 Parallel Port Mode This field allows y ou to determine paral lel port m ode function. SPP Standard Printer Port EPP Enhanced Parallel Port ECP Extended Capabilities Port ECP+EPP Combination of ECP and EPP capabilities Normal Norm al function PWRON After PWR-Fail This field sets the syst em power status whether on[...]

BIOS SETUP 38 I B935 User’s Manual Power Management Setup The Power Managem ent Setup allows you to save energy of your system effectively. Phoenix - AwardBIOS CMOS Setup Utility Power Management Setup ACPI Function Enabled ITEM HELP ACPI Suspend Type S3(STR) Power Management User Define Menu Level > Video Off Method DPMS Video Off In Suspend [...]

BIOS SETUP IB935 User’s Manual 39 Video Off Method This field defines the Video Off features. There are three options. V/H SYNC + Blank Default setting, blank the screen and t urn off vertical and horizontal scanning. DPMS Allows BIOS to control the video display. Blank Screen Writes blanks t o the video buffer. Video Off In Suspend When enabled,[...]

BIOS SETUP 40 I B935 User’s Manual Pow er On by Ring This field enables or disabl es the power on of the system t hrough the modem connected to the serial port or LAN. Resume by Alarm This field enables or disabl es the resumption of the system operation. When enab led , the user is allowed to set th e Date and Time . Reload Global Timer Events T[...]

BIOS SETUP IB935 User’s Manual 41 PNP/PCI Configurations This option configures the PCI bus sy stem. All PC I bus systems on t he system use INT#, thus all installed PCI cards must be set to this value. Phoenix - AwardBIOS CMOS Setup Utility PnP/PCI Configurations PNP OS Installed No Init Display First PCI Slot ITEM HELP Reset Configuration Data [...]

BIOS SETUP 42 I B935 User’s Manual PC Health Status This section shows the parameters in determining the PC Health Status. These parameters include tem perat ures, fan speeds and voltages. Phoenix - AwardBIOS CMOS Setup Utility PC Health Status Shutdown Temperature CPU Warning Temperature Disabled Disabled ITEM HELP Current System Temp. 34°C/93?[...]

BIOS SETUP IB935 User’s Manual 43 Frequency/Voltage Control This section shows the user how to configure t he processor frequency. Phoenix - AwardBIOS CMOS Setup Utility Frequency/Voltag e Control CPU Clock Ratio Auto Detect PCI Clk 8 X Disabled ITEM HELP Spread Spectrum Disabled M enu Level > Auto Detect PCI Clk This field enables or disabl e[...]

BIOS SETUP 44 I B935 User’s Manual Load Fail-Safe Defaults This option allows y ou to load the troubl eshooting default values permanently stored in the BIOS ROM. These default settings are non-optimal and disable all high-perform ance features. Load Optimized Defaults This option allows yo u to load the d efault values to your system configurati[...]

DRIVERS INSTALLATION IB935 User’s Manual 45 Drivers Installation This section describes the in stalla tion procedures for software and drivers under the Windows 98SE, Windows ME, Windows 2000 and Windows XP. The software and drivers are included with the motherboard. If you find t he items m issing, please contact the vendor where you made the pu[...]

DRIVER INSTALLATION Intel Chipset Software Intallation Utility The Intel Chipset Drivers should be i nstalled first before the soft ware drivers to enable Plug & Pl ay INF support for Int el chi pset com ponent s. Follow the instructions bel ow to complete t he installation under Windows 98SE/ME/2000/XP. (Before inst alled Intel Chi pset Softwa[...]

DRIVERS INSTALLATION 4. Click Ye s to accept the software license agreement and proceed with the installation pro cess. 5. On the Readme Inform ation screen, click Next to continue the installation. 6. When the Setup Progress screen appears, click Next to continue. 7. The Setup process is now compl ete. Click Finish then restart the computer and fo[...]

DRIVER INSTALLATION Intel Graphics Driver Installation To install the Graphics drivers, follow the steps below to proceed with the installation. 1. Insert the DVD that comes with the board. Click Intel Chipsets and then Intel(R) Bearlak e Chip set Family Drivers . 2. Click Intel(R) Bearlake Chipset Family Graphics Driver. 3. When the Welcome screen[...]

DRIVERS INSTALLATION Realtek HD Code Audio Driver Installation Follow the steps below to install the Realtek High Defin ition Codec Audio Driver. 1. Insert the DVD that comes with the board. Click Intel Chipsets and then Intel(R) Bearlak e Chip set Family Drivers . 2. Click Realtek High Definition Codec Audio Driver. 3. When the Welcome screen appe[...]

DRIVER INSTALLATION Intel PRO LAN Drivers Installation Follow the steps below to start installing the Int el 82566DM or Intel 82574L drivers. 1. Insert the DVD that comes with the board. Click Intel Chipsets and then Intel(R) Bearlak e Chip set Family Drivers . 2. Click Intel(R) PRO LAN Network Drivers. 3. On the next screen, click Install Drivers [...]

DRIVERS INSTALLATION Follow the steps below t o use the wake up function by Intel 82566DM or Intel 82574L. 1. The BIOS Setup item “Wake-Up by PCI card” has to be set as [Enabled] . 2. Go to the Device Manager under Windows and select Network adapters. The following window will appear (Intel(R) 82566DM Gigabit Network Connection Propertie s). Cl[...]

DRIVER INSTALLATION IDE Controller Drivers Installation Follow the steps below to install IDE Co ntroller Drivers. 1. Insert the CD that comes with the motherboard . Click ITE8211 Chip and then IDE Controller Drivers . When the Welcome screen appears, click Next to continue. 2. Select Type as ‘Typical’ and click Next to continue. Restart when p[...]

APPENDIX IB935 User’s Manual 53 Appendix A. I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also b ecomes the identity of the d evice. The following table lists the I/O port addresses u sed . Address Device Description 000h - 01Fh DMA Cont roller #1 020h - 03Fh Interrupt Controller #1 040h -[...]

APPENDIX 54 I B935 User’s Manual B. Interrupt Request Lines (IRQ) Peripheral devices use interrupt request l ines to notify CPU for the service required. The following table shows the IRQ used by the devices on board. Level Function IRQ0 System Timer Output IRQ1 Keyboard IRQ2 Interrupt Cascade IRQ3 Serial Port #2 IRQ4 Serial Port #1 IRQ5 Reserved[...]

APPENDIX IB935 User’s Manual 55 C. Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programm able count. The WDT is suitable for use in t he prevention of system lock-up, such as when soft ware becom es trapped in a deadlock. Under these sort of circumstances, the tim er will count to zero and the [...]

APPENDIX 56 I B935 User’s Manual mov cl, 0F5h call Read_Reg and al, NOT 08h call Write_Reg ;set count m ode as second pop ax mov cl, 0F6h call Write_R eg ;set watchdog timer mov al, 01h mov cl, 30h call Write_R eg ;watchdog enabled call Lock_Chi p r e t Enable_And_Set_Watchdog Endp ;[]=============================================== ; Name : Disab[...]

APPENDIX IB935 User’s Manual 57 ; Name : Unlock_Chip ; IN : None ; OUT : None ;[]=============================================== Unlock_Chip Proc Near Mov dx, 4Eh mov al, 87h out dx, al out dx, al r e t Unlock_Chip Endp ;[]================================================ ; Name : Lock_Chip ; IN : None ; OUT : None ;[]=============================[...]

APPENDIX 58 I B935 User’s Manual ; Name : Read_Reg ; IN : CL - register index ; OUT : AL - Value to read ;[]================================================= == Read_Reg Proc Near Mov al, cl mov dx, 4Eh out dx, al inc dx in al, dx r e t Read_Reg Endp ;[]================================================[...]

APPENDIX IB935 User’s Manual 59 D. Digital I/O Sample Code Filename: W 627hf. h //===================================================================== // // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, IN CLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILI[...]

APPENDIX 60 I B935 User’s Manual Filename: W 627hf.cpp //===================================================================== // // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, IN CLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/ OR FITNESS FOR A [...]

APPENDIX IB935 User’s Manual 61 //===================================================================== // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, IN CLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/ OR FITNESS FOR A PARTICULAR // PURPOSE. //=[...]

APPENDIX 62 I B935 User’s Manual This page is intention ally left blank.[...]