Impex PREMIER инструкция обслуживания

NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruc tion Parts L ist Resistance Chart Warranty Ordering Parts Model PREMIER Retain This Manual for Reference 09-23-02 OWNER'S MANUAL MARCY PREMIER HOME GYM IMPEX FITNESS PRODUCTS 14777 DON JULIAN RD., CITY [...]

TA BLE OF CONTENTS BEFORE YOU BEGIN....................................................................................……….. 1 IMPORTANT SAFET Y NOTICES...................................................................……….. 2 HARDW ARE IDENTIFIER.....….....................................................................……….. 3 [...]

IMPORTANT SAFETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine. In particul ar, note the follow ing safety precautions: 1. Keep children and pets away [...]

3[...]

A SSEMBLY INSTRUCTION Tools Required A ssembling the Machine: Tw o Adj ustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended this machine to be assembled by tw o or more people to avoid possible inj ury. STEP 1 (See Diagram 1) A.) Sl ide tw o Round Rubber Bumper s (#55) onto the Gui de Rods (#14). Al ign the hol es and push two Guid[...]

STEP 2 (See Diagram 2) A.) Attach the Main Ba se Frame (# 1) to the Rea r St a bilizer (#2). Secure it with one Bracke t (#41), tw o M10 x 2 ¾” Car riag e Bolts (#79), ∅ ¾ ” W ashers (#81), and M10 Aircr aft Nuts (#84). Do not tig hten the Nuts and Bolts yet. B.) Attach the bottom of the Verti cal Beam (#3) to the Main Base Frame ( #1). Sec[...]

STEP 3 (See Diagram 3) A.) Attach the Left and Right Front Pr esses (#6 & 7) to the piv ot on the Main Base Frame (#1). Secure them together w ith a M10 x 8 1/8” Ax le (#38), two ∅ ¾” W ashers (#81), and two M10 Aircraft Nuts (#84) . B.) Attach the Front Press Bracket ( #15) to the Front Presses. Secur e it wi th two M 10 x 3 1/8” Carr[...]

STEP 4 (See Diagram 4) A.) Sl ide one Butterfly Support Bracket (#10) onto the Rig ht Butterfly ( #9). Insert the Ri ght Butterfly i nto the pivot on the Butter fly Support Fr ame (#13) from the bottom. Secure i t wi th one ∅ 1 ½” W asher (#21), ∅ 1 3/8” Lock Ri ng (#57) , M6 x 1 5/8” Hex Bolt (#76), and M 6 Aircraft Nut (#85) . B.) Atta[...]

STEP 5 (See Diagram 5) A.) Attach two ∅ 1” x ¼” Bushings ( #60) to the piv ot on the Leg Dev eloper (#11). Attach the Leg Dev eloper (#11) to the Bracket in front of the Seat. Secure it w ith one M12 x 3 1/8” Allen Bolt ( #67), tw o ∅ 1” W ashers (#80) and one M12 Aircr aft Nut (#83). B.) Inser t two Foam R oll Tubes (#24) hal fway thr[...]

CABLE LOOP DIAGRAM 9[...]

STEP 6 (See Diagram 6 & Cable Loop Diagram) A.) Attach the Lat Bar Holder ( #16) to the top of Vertical Beam (#3). Secure i t wi th one M10 x 2 ¾” Car riag e Bolt (#79) , ∅ ¾” W asher (#81), and M10 Air craft Nut (#84). B.) Attach the 109” Upper C able (#26) to the top openi ng on the Verti cal Beam. Attach a Pulley (#64) to the openi[...]

STEP 7 (See Diagram 7 & Cable Loop Diagram) A.) Attach one end of the 77” Butter fly Cable ( #28) to the slot on the Right Butterfly Support Bracket (#10). D raw the Cable tow a rds the right open bracket on the Upper Frame (#4). B.) Attach a Pul ley ( #64) to the bracket. Secur e it wi th one M10 x 1 ¾” All en Bolt (#69), tw o ∅ ¾” W[...]

STEP 8 (See Diagram 8 & Cable Loop Diagram) A.) Attach the 161” Low er Cable ( #27) to the opening on the bottom of the Leg Devel oper (#11) . B.) Attach a Pulley (#64) to the opening . Secure it with one M10 x 2 ½” Allen Bolt (#68), tw o ∅ 7/8” Pulley Bushing s (#44), and one M 10 Aircr aft Nut (#84). C.) Draw the Cable underneath the[...]

DIAGRAM 8 13[...]

STEP 9 (See Diagram 9 & Cable Loop Diagram) A.) Attach the 46” Front Press Cabl e (#29) to the bracket on the M ain Base Frame (#1) . Secure the Cable to the br acket wi th one M10 x 1 1/8” Allen Bolt ( #71), two ∅ ¾” W ashers (#81), and one M 10 Aircr aft Nut (#84). DO N OT over tig hten the Nut and Bolt. The eyelet on the Cabl e shou[...]

STEP 10 (See Diagram 10) A.) C over the W eight stack by tw o W eight Stack Covers ( #19). Secure each W eight Stack Cover with tw o M10 x ¾” Allen Bolts ( #72) and ∅ ¾” W ashers (# 81). B.) C onnect the Lat Bar (#17) to the Upper Cabl e (#26) w ith two C-cli ps (#45) and one Short Chain (#40) . C.) Connect the Arm Cur l Handle ( #18) to th[...]

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Base Fram e 1 2 Rear Stabilizer 1 3 Vertical Beam 1 4 Upper Fram e 1 5 Top Soc ket As sem bly 1 6 Left Front Pr ess 1 7 Right Front Pres s 1 8 Left Butterfly 1 9 Right Butterfly 1 10 Butterfly Support Brack et 2 11 Leg Developer 1 12 Seat Incline Adjus tm ent 1 13 Butterfly Support Fram e 1 14 Guide Rod [...]

MWM Premier Weight Resistant Chart No. of Plates Bench Press Butterfly Lat Pull Leg Developer 1 38 10 20 20 2 49 13.5 30 30 3 60 16.5 40 40 4 71 20 50 50 5 82 23.5 60 60 6 93 26.5 70 70 7 104 30 80 80 8 115 33.5 90 90 9 126 36.5 100 100 10 137 40 110 110 11 148 43 120 120 12 159 46.5 130 130 13 170 50 140 140 14 181 53 150 150 *Each plate weights 1[...]

IMPEX INC. LIMITED WARRANTY IMPEX Inc. ( "IMPEX") warrants this produc t to be f ree from def ects in work m ans hip and m aterial, under norm al use and s ervic e conditions , f or a per iod of two years on the F ram e f r om the date of purchase. T his warr anty extends only to the original purchaser . IMPEX 's obligation under thi[...]