Impex BF-1200 инструкция обслуживания

NOTE: Please read all i nstructions caref ully befor e using this product Table of Contents Safety Notice Hardware Pack Assembly Instruc tion Parts L ist Warranty Ordering Parts Model BF-1200 Retain This Manual for Reference 07-20-09 OWNER'S MANUAL Deluxe Elliptical Machine BF-1200 IMPEX ® INC. 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746[...]

TA BLE OF CONTENTS BEFORE YOU BEGIN...................................................................................…. 1 IMPORTANT SAFETY NOTICES..................................................................…. 2 HARDW ARE PACK……….....…....................................................................…. 4 ASSEMBLY INSTRUCTIONS.[...]

IMPORTA NT SA FETY NOTICE PRECA UTIONS This exerci se machine is bui lt for optimum safety. How ever , certain precauti ons apply whenev er you operate a piece of exer cise equi pment. Be sure to read the entir e manual before you assemble or operate your machine. In particul ar, note the follow ing safety precautions: 1. Keep children and pets awa[...]

WA RNING LA BEL PLA CEMENT The W arning Label shown here has been placed on th e Rear Stabilizer. If the label is missing or illegible, please call custom er service at 1- 800-999-8899 for rep lacement. Apply the label in location show n. 3[...]

HA RDWA RE PA CK NOTE: The f ollow ing p arts are not d rawn to scale. Please use your ow n ruler t o measure th e size. 4[...]

A SSEMBLY INSTRUCTION NOTE: It is strongly recommended that tw o or more people assemble this machine to avoid possible injury . STEP 1 (See Diagram1) A.) Do not tighten the Nuts and Bolts until instructed to do so. B.) Attach the Front Stabilizer (#39) to the Main Frame (#32). Secure it with tw o M8 x 2 ½” Carriage Bolts (#35), tw o ∅ 5/8” [...]

STEP 2 (See Diagram 2) A.) Note: Extra help may be needed to hold the Front Post (#42) w hile connecting the computer wires. B.) Connect the Upper C omputer W ire (#91) from the bottom of Front Post to the Lower Computer W ire (#92) f rom the main Fame (#32). C.) Attach the Front Post to M ain Frame. Secure them tog ether w ith four M8 x ¾ ” All[...]

STEP 3 (See Diagram 3) A.) Note: In order to install the Pedal Supports (#30 & #38), extra help may be needed. B.) Do not tighten Nuts and Bolts until instructed to do so. C.) Attach the Left Pedal Support (#38) onto the g roov e on left Roller W heel (#49). D.) Insert the piv ot on Left Pedal Support into the hole on the left Connecti ng Brack[...]

STEP 4 (See Diagram 4) A.) C over the heads of the tw o M8 x ¾” Hex Bolts (#6) pre-instal led by factory with two M 8 Nut Caps (#5). B.) C over the tw o M8 Aircraft Nuts (#23) i nstalled in Step- 3 with tw o M8 Nut Caps (#5). DIAGRAM 4 8[...]

STEP 5 (See Diagram 5) A.) Attach the tw o Pedals (#29) onto the Left & Rig ht Pedal Support (#38 & #30). Secure each Pedal wi th three M8 x 1” Allen Bolts (#28). DIAGRAM 5 9[...]

STEP 6 (see Diagram 6) A.) Inser t the Rig ht Stride Handl e (#2) into the R ight C onnecting Rod ( #15). Insert the Left Stride Handl e (#44) into the R ight C onnecting R od (#41). B.) Secur ely ti ghten each Handl e wi th two M8 x 2” Carriag e Bolts (#11), tw o Ø 5/8” Curved W ashers (#24), tw o Ø 5/8” Lock W ashers (#7), and tw o M8 Aco[...]

STEP 7 (See Diagram 7) A.) Attach the W ater Bottle Rack (#18) to the Front Post (#42). Secur e it wi th two M 5 x 5/8” Philips Screws (#17). B.) Stor e the W ater Bottle (#14) in the Rack. DIAGRAM 7 11[...]

STEP 8 (See Diagram 8) A.) Attach the Stati onary Handle (#27) to Front Post (#42). Secur e it wi th four M8 x ¾ ” Allen Bolts (#21), four Ø 5/8” Lock W ashers (#7), and four Ø 5/8” Flat W ashers (#22). DIAGRAM 8 12[...]

STEP 9 (See Diagram 9) A.) Remove the four M5 x 5/8” Computer Philips Screw s (#43) from the Computer (#45). B.) C onnect the Upper Computer W ire (#91) to the w ire on Computer . C.) Plug the sensor w ire (#93) on the Front Post ( #42) into the Computer . D.) Attach the Computer to the bracket on Front Post. Secur e it with the four (remov ed pr[...]

STEP 10 (See Diagram 10) A.) Pl ug the AC Adapter (#34) to110v outlet, and plug the power cord into the Mai n Frame (#32). Not e: Only use the original A C A dapter from manufacturer. Do not use any A dapter w hich is not from manufacturer. DIAGRAM 10 14[...]

EXPLDOED DIAGRAM 15[...]

16[...]

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Stride Handle Cover Cap 2 51 Ø 1 1/8” x Ø 7/8” Spacer 2 2 Right St r ide Handle 1 52 Ø 1 1/8” x ½” Bushing 2 3 Ø 1 ½” Str ide Handle Bushing 2 53 Ø 1 1/ 8” x ¼” Spacer 2 4 Stationary Handle Gr ip 2 54 Connecting Br ack et 2 5 M8 Nut Cap 4 55 Ø 1 1/8” x 5/8” Bushing 2 6 M8 x ¾” He[...]

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be f ree f rom defec ts in work m anship and m aterial, under norm al use and service c onditions, for a per iod of two y ear s on the Fram e from the date of purchase. This warranty extends only to the original purchas er. IMPEX's obligation under this [...]