Iiyama ProLite T3234MSC-B2X инструкция обслуживания

ENGLISH Thank you very much for choosing the iiyama LCD monitor . We recommend that you take a few minutes to read this comprehensive manual carefully before installing and switching on the monitor . Please keep this manual in a safe place for your future reference. USER MANUAL[...]

ENGLISH[...]

ENGLISH  We reserve the right to change speci fi cations without notice.  All trademarks used in this user manual are the property of their respective owners. We recommend recycling of used product. Please contact your dealer or iiyama service center . Recycle information is obtained via the Internet, using the address: http://www .iiyama.co[...]

ENGLISH T ABLE OF CONTENTS FOR YOUR SAFETY ............................................................................ 1 SAFETY PRECAUTIONS................................................................ 1 SPECIAL NOTES ON LCD MONITORS ......................................... 3 CUSTOMER SER VICE ...................................................[...]

ENGLISH FOR YOUR SAFETY 1 FOR YOUR SAFETY W ARNING STOP OPERA TING THE MONITOR WHEN YOU SENSE TROUBLE If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor and contact your dealer or iiyama service center immediately . Further use may be dangerous and can cause fi re or electric shock. NEVER REMOVE THE CAB[...]

ENGLISH 2 FOR YOUR SAFETY CAUTION INST ALLA TION LOCA TION Do not install the monitor where sudden temperature changes may occur , or in humid, dusty or smoky areas as it may cause fi re, electric shock or damage. Y ou should also avoid areas where the sun shines directly on the monitor . DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION The monito[...]

ENGLISH FOR YOUR SAFETY 3 The following symptoms are normal with LCD monitors and do not indicate a problem. NOTE SPECIAL NOTES ON LCD MONIT ORS  When you fi rst turn on the LCD monitor , the picture may not fi t in the display area because of the type of computer that is used. In this case, adjust the picture position to the correct positi[...]

ENGLISH 4 BEFORE YOU OPERA TE THE MONITOR NOTE  If you have to return your unit for service and the original packaging has been discarded, please contact your dealer or iiyama service center for advice or replacement packaging. W ARNING  If you drop any materials or liquids such as water into the monitor when cleaning, unplug the power [...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 5 The following accessories are included in your package. Check to see if they are enclosed with the monitor . If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama of fi ce. * 1 The rating of the Power Cable enclosed in 120V area is 10A/125V . If you are using a power[...]

ENGLISH 6 BEFORE YOU OPERA TE THE MONITOR When you use with the wall mounting, in consideration of thickness of the mounting stage, tighten the M4 Screw with washer which “L” length is 14mm to fasten the monitor . Using the screw longer than this may cause electric shock or damage because it may contact with the electrical parts inside the moni[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 7 CONTROLS AND CONNECTORS Menu Button (MENU)* Scroll Up / Brightness Button ( )* Scroll Down / Mute Button ( )* Select / Auto Button (SELECT)* Power Switch ( )* Power Indicator Green: Normal operation Orange: Power Management USB Connector (USB) RS232C output Connector (COM OUT) RS232C input Connector (COM IN[...]

ENGLISH 8 BEFORE YOU OPERA TE THE MONITOR CONNECTING YOUR MONITOR Ensure that both the computer and the monitor are switched off. Connect the computer to the monitor with the signal cable. Connect the computer to the monitor with the USB Cable. Connect the monitor to the audio equipment with the Audio Cable for computer when using the audio feature[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 9 Computer RS-232C Input RS-232C Output RS-232C Input RS-232C Output Null modem cable Null modem cable Monitor Monitor [Controlling the Monitor via RS-232C Remote Control] The monitor can be controlled by connecting a PC with a RS-232C terminal. Use the Null modem cable to enable it. T wo RS-232C Ports are re[...]

ENGLISH 10 BEFORE YOU OPERA TE THE MONITOR [Rotating the Display] It is designed to be compatible in both landscape and portrait modes, however , it is optimized for landscape mode. Note that the OSD orientation cannot be changed in the OSD menu. A A Not A vailable A A Landscape Portrait A vailable[...]

ENGLISH BEFORE YOU OPERA TE THE MONITOR 1 1  Procedure for turning ON the Power Switch T urn ON the monitor fi rst, and then the computer .  T ouch screen driver software T ouch screen driver software and system may not start when you start your computer while touching the screen. T ouch screen driver software may not run due to the power[...]

ENGLISH 12 OPERA TING THE MONITOR OPERA TING THE MONITOR To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT TIMING shown on page 26. Y ou are also able to adjust the picture by following the button operation shown below . For more detailed adjustments, see page 17 for SCREEN ADJUSTMENTS.  Press [...]

ENGLISH OPERA TING THE MONITOR 13 ADJUSTMENT MENU CONTENTS Adjustment Item Problem / Option Button to Press T oo dark T oo bright BRIGHTNESS * CONTRAST T oo dull T oo intense * Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too bright. Y ou can skip the Menu items and display an adjustment scale directly [...]

ENGLISH 14 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press FINE * 2 H-SIZE * 2 T oo left T oo right T oo low T oo high H-POSITION V -POSITION T oo narrow T oo wide T o correct fl ickering text or lines AUTO ADJUST * 1 Adjust H/V -POSITION, H-SIZE and FINE automatically . * 1 For best results, use the Auto Adjust in conjunct[...]

ENGLISH OPERA TING THE MONITOR 15 OSD TIMEOUT OSD H-POSITION OSD is too left OSD is too right OSD is too low OSD is too high Y ou can set the OSD display duration time between 5 and 60 seconds. Adjustment Item Problem / Option Button to Press OSD V -POSITION RESET Factory-preset data is restored. INPUT SELECT When only one of the two signal inputs [...]

ENGLISH 16 OPERA TING THE MONITOR Adjustment Item Problem / Option Button to Press Greenish white Y ellowish white GREEN RED T oo weak T oo strong USER Reddish white Bluish white 9300 COLOR TEMP . 5500 6500 7500 BLUE 9300 6500 5500 7500 USER RED GREEN BLUE 94 90 100 VOLUME MUTE Adjustment Item Problem / Option Button to Press VOLUME T oo soft T oo [...]

ENGLISH OPERA TING THE MONITOR 17 SCREEN ADJUSTMENTS  The screen adjustments described in this manual are designed to set image position and minimize fl icker or blur for the particular computer in use.  The monitor is designed to provide the best performance at resolution of 1920 × 1 08 0, b ut c a n n o t provide the best at resolutions o[...]

ENGLISH 18 OPERA TING THE MONITOR F 1) Adjust the H-POSITION so that the left side of the picture frame will move to the left edge of the display area.  When the left side of the picture frame moves apart from the left edge of the display area during the H-SIZE adjustment, adjust steps 1) and 2).  Another way to make the H-SIZE adjustment is [...]

ENGLISH OPERA TING THE MONITOR 19  In case the strong fl icker or blurs remain on a part of the screen, repeat steps F and G because the H-SIZE may not be adjusted correctly . If the fl icker or blurs still remain, set the refresh rate of computer to low (60Hz) and repeat steps from C again.  Adjust the H-POSITION after the FINE adjustment [...]

ENGLISH 20 OPERA TING THE MONITOR  Even when using the power management mode, the monitor consumes electricity . Turn off the Power Switch whenever the monitor is not in use, during the night and weekends, to avoid unnecessary power consumption.  It is possible that the video signal from the computer may be on while the H or V sync sign[...]

ENGLISH TROUBLE SHOOTING 21 The screen is not synchronized.  The Signal Cable is properly connected.  The signal timing of the computer is within the speci fi cation of the monitor .  The vid eo output level o f the computer is within the specification of the monitor . The picture does not appear .  The Power Cable is fi r[...]

ENGLISH 22 RECYCLING INFORMA TION For better environment protection please don't dispose your monitor . Please visit our web site: www .iiyama.com/recycle for monitor recycling. RECYCLING INFORMA TION[...]

ENGLISH APPENDIX 23 APPENDIX Design and speci fi cations are subject to change without prior notice. SPECIFICA TIONS : ProLite T3234MC-B1 LCD Panel Driving system a-Si TFT Active Matrix 0.364mm H × 0.364mm V Response time Pixel pitch 6.5ms (Gray to Gray T ypical) Display Colors Approx.16.7M Sync Frequency Horizontal: 31.47-67.50kHz, V ertical: 47[...]

ENGLISH 24 APPENDIX SPECIFICA TIONS : ProLite T3234MC-B2X / ProLite T3234MC-B2 LCD Panel Driving system a-Si TFT Active Matrix 0.364mm H × 0.364mm V Response time Pixel pitch 6.5ms (Gray to Gray T ypical) Display Colors Approx.16.7M Sync Frequency Horizontal: 31.47-67.50kHz, V ertical: 47-63Hz Maximum Resolution 1920 × 1080, 2.1 MegaPixels Input [...]

ENGLISH APPENDIX 25 DIMENSIONS : ProLite T3234MC-B1 698.5mm/27.5” 786.0mm/30.9” 393.5mm/15.5” 480.5mm/18.9” 25.0mm/1.0” 69.0mm/2.7” 44.0mm/1.7” DIMENSIONS : ProLite T3234MC-B2X / ProLite T3234MC-B2 698.5mm/27.5” 781.5mm/30.8” 393.5mm/15.5” 476.0mm/18.7” 44.5mm/1.7” 69.5mm/2.7”[...]

ENGLISH 26 APPENDIX M100E21 COMPLIANT TIMING Dot Clock 25.175MHz 36.000MHz 40.000MHz 65.000MHz 74.500MHz 79.500MHz 108.000MHz 108.000MHz 85.500MHz 106.500MHz 146.250MHz 148.500MHz V ertical Frequency 59.940Hz 56.250Hz 60.317Hz 60.004Hz 60.000Hz 59.870Hz 60.000Hz 60.020Hz 59.790Hz 59.887Hz 59.954Hz 60.000Hz VESA SVGA VGA XGA 1024 × 768 640 × 480 8[...]